Colors applied by rules removed after replying

I have rules set up for my incoming messages which apply colors based on my address book groups - friends, family, work, bills, etc.
I noticed on 10.5 that when I reply to a message, the color gets removed. i first noticed this with manually removing attachments, but then noticed it happens after a reply.
Wondering if anyone else is seeing this behavoir, or if I need to look at my system and/or rules for some weirdness on my end.

OK so an update to the label color issue - it seems once messages arrive and the initial rules are processed things are fine. but if I remove attachments or move to another mailbox (on the IMAP server), they lose the color. However, just selecting the message in the list will reapply the color, as if the rules are re-run on that message.
IMAP flags are not affected, so it seems it's an Apple Mail issue with the color labels.
I do have two mail plugins, Mail Act-On and Mail Appetizer. I suppose next step would be to remove these, although I believe I was having these issues on the MacBook even before installing these. I have the same problem on both computers, both running 10.5.2 and neither had this issue under 10.4.11 and I had those plugins (and others) installed as well on the previous system.
This is happening to both a Gmail account as well as my own hosted account emails.

Similar Messages

  • 'Contacts' folder with sub folder cannot be removed after synching via iTunes

    'Contacts' folder with sub folder cannot be removed after synching via iTunes
    I am trying to remove a 'Contacts' subfolder
    ie Contacts < default folder
    - Contacts Mysubfolder 1 < Trying to remove this subfolder folder
    via my microsoft outlook onto my iPhone.
    Despite not having 'Contacts Mysubfolder 1' on my PC's outlook after deleting it, it does not delete the subfolder in my iPhone.
    I even restored my iPhone settings to the original via iTunes.
    I also replaced my physical iPhone but still synching with my original Apple ID + iTunes on the same desktop.
    All I did was after replacement of my iP, i setup my microsoft Exchange account, and there it was, the Contacts subfolder which is no longer around, appears on my iPhone contacts folder list.
    My outlook is on Microsoft exchange and I am on iP 3Gs
    Please help
    Thank you

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you are running 64-bit Windows and the above steps haven't helped try installing the version of iTunes that can be downloaded from this support document. iTunes 12.1 for Windows (64-bit — for older video cards)
    If you still have no luck try reinstalling iTunes 12.0, links in the user tip.
    tt2

  • Junk Mail: applying custom rules disables junk database

    Using default settings my junk mail filter works most of the time. But there are several persistent streams of spam that never get recognized as junk, and custom rules would identify them easily. But everytime I try, suddenly all the other junk that was being flagged comes through to my in box. I've selected "Trust junk mail headers in messages" and "Filter junk mail before applying my rules" but it has no effect.
    Also, the minute I add custom rules, "Erase Junk Mail" greys out and cannot be selected anymore. I have to first send my junk box to trash, then erase my trash.
    I've read the help files and they don't address this at all. (Same problem in 10.6)

    Don't have 3.0 on my computer but go to the Mail menu and choose Preferences.
    The click on Junk Mail then on Advanced and see what color is chosen in the setting and the conditions under which it is set.

  • Unable to access Business Rules Facts after refreshing XML Facts

    I have created a business rule using an xml schema to generate the XML Facts. Then I created a Decision Function to call a Ruleset to process the information in the XML Facts. This decision function has input and ouput parameters from the XML Facts.
    The decision function is used inside a BPEL Process, by defining the Dictionary has the created business, defined the Service has de Decision Service. After this configuration I'm able to define the Input Facts and Output Facts from and to a variable in the bpel process. Using the Decision Fact Map window I define the input and output to the exposed Business Rule Facts. This works just fine. The BPEL runs and the Rules are correctly used.
    When I change my xml schema to add more elements and complex types I use the "Reload XML Facts From Updated Schemas" option available in the bussiness rule. After this operation I will no longer have access to the Bussiness Rule Facts in the Decision Fact Map window. So I'm no longer able to call the decision function.
    Yet the business rule has no problems and i have tested using a fuction to call the Decision Function.
    Is this a bug or a feature?
    I'm using Oracle 11g with the SOA Composite Editor 11.1.1.0.0.52.19.

    Problem solved. There was an element in the xml schema that had nillable = true. Because of this the XML Fact for that element would no longer be available in the BPEL Process. Removing the nillable and generating the XML Facts again solved the missing variable problem.

  • LCRs in queue in source Database are not removed after propagation

    Hello,
    I am using Oracle 10g Enterprise Edition 10.2.0.3 databases with Linux in VMware virtual machines. Replication (master-slave) with Streams does it's job quite well, but LCRs in the source queue are not removed after propagation.
    I think this is because the apply process cannot send the notification after applying LCRs. does anyone know if Oracle Streams use a different port (different from standard listener port 1521) for the notifications?
    For some stupid reason I have to run my virtual machine with a NAT network, so I have to do port-forwarding for every single port the VM needs to use. Does anyone know any more ports than Listener (1521) and EnterpriseManager (1158) I need? Any other suggestions?
    Thanks in advance,
    Oliver Jelinski

    Hello again,
    When I wrote "notification" I wanted to write "acknowledgement". So again: does anyone know, how acknowledgements are sent by the apply process (which port)? And when I am right, they are sent to the propagation process, which gives another acknowledgement to the capture process. Does anyone know how this second acknowledgement ist sent?
    Thanks again, looking forward to reading your comments,
    Oliver Jelinski

  • Applying a rule to my form?

    Is there a way i can apply a rule to my form so that when either the 'Burial' or 'Cremation' section (both radio buttons) are selected the other is zeroed?
    So that if a visitor to this site has a play around with the form before putting in their actual selections, only either one ('Burial' or 'Cremation') has a value more than '0' next to it. Reason being, when all the info comes through to the email at the other end after the form is submitted, it is clear as to which section has been chosen. Obviously you can only be Cremated or Buried!!
    Any help appreciated!
    http://www.milesmemorials.com/estimator.html

    Ness_quick wrote:
    Obviously you can only be Cremated or Buried!!
    Yeah but there are some clients (most) I'd like to cremate and bury

  • Applying Split Rule in TP/VS

    After applying split rule, the orders are split into small deliveries as per the Split Rule maintained. It takes some time for the deliveries to get triggered in R/3 system and get reflected in APO. Once we apply split rule, it shows a message u201CCreation of deliveries startedu201D and exits the split rule transaction instantly.
    Is it possible that we come to know whether all deliveries as proposed by the u201Capplication of split ruleu201D have been created and have come to APO or not? We want to know this status in u201CApply Split Ruleu201D transaction itself.
    Sunil Madhogarhia

    Hi Sunil,
    There is no such provision in the screen. You may think of custom enhancement to call the necessary report from screen itself
    Regards
    Sandeep Patil

  • Local administrators groups removed after gpupdate from windows 7 64bit VM

    Hi,
    I have a windows 7 workstation. And whenever I add any group into the local admins it get removed after running up of gpupdate or restart of the machine.
    I have tried to give group from AD to that computer name, into the security tab but that also didn't help me to overcome from this problem.
    Also OU of the computer is right where other machines are lying and those machines local admins doesn't remove.
    This problem started after I fixed the issue of temp profile creation into the workstation.
    Kindly provide some solution that I can implement from AD, workstation or ADSI edit...
    AD is on Windows server 2008 R2. Also nothing change on group policy side.

    Please run gpresult and check the policy applied and did you use any Group Policy Restricted Groups
    http://support.microsoft.com/kb/279301/en-us
    Meanwhile, pay attention to the group policy precedence
    http://technet.microsoft.com/en-us/library/cc785665(v=ws.10).aspx
    It is recommended to ask in this forum
    Windows Sever\Group Policy Forum
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverGP
    Yolanda Zhu
    TechNet Community Support

  • My iPhone 5s on ios 8.1.2 is stuck at Apple logo or recovery mode.. To fix this issue, i need to update it to ios 8.2 through itunes.. I want to ask that my data i.e. Photos and other personal data would be removed after updating it or not..?

    My iPhone 5s on ios 8.1.2 is stuck at Apple logo or recovery mode.. To fix this issue, i need to update it to ios 8.2 through itunes.. I want to ask that my data i.e. Photos and other personal data would be removed after updating it or not..?
    if yes then how can i save my data or get out of recovery mode.. Is there any safe mode or something like that on which i could access my data..
    P.S. I have not taken any backup of my iPhone on itunes..
    Please help me sort out this issue..

    Recovery mode doesn't mean that all your data is already lost. You only lose your data if you restore it.
    When you plug the phone is into iTunes hold down the home button. iTunes may then give you the option JUST to update the software first. This should not get rid of any data.
    However, if iTunes is only giving you the option to RESTORE and update, then you will lose your data I'm afraid.
    Hope that helps!

  • Looking for a "color pass filter"..Remove all colors but 1

    Looking for a "color pass filter"..Remove all colors but 1 or 2.
    FCP6 doesn't seem to have one.
    Anyone heard of one that works really well & that is fast to use?
    steve

    Jim,
    You are totally missing the point. I am an Adobe Premiere Pro instructor. I have been for 5 years. I added my 1st FCP system 2 weeks ago & am experiencing typical transitional curiosities as all who switch to other platforms & editing apps do.
    PP has a color pass filter. I was curious to see if FCP did. That sounds logical to me:) If posting the question about the possibility of there being a color pass plugin bothers you, well , that has to do with you.
    If you take a moment to read the prior correspondence, you might see my point.
    I think we can bury the hatchet now:)

  • Win 8.1 modern calendar - all notes in a calendar meeting are truncated/removed after opening/viewing (Exchange 2010 and EAS)

    All,
    If this isn't the best forum to post in, please let me know.
    I am having an issue when I accept calendar invites in the native/modern application for calendaring in Win 8.1. Whenever I then go back to open and view the contents of a meeting, all the notes are truncated and removed after closing that event.
    We are running exchange 2010 for the email server.
    The machine is not domain joined/managed (local account only).
    Any assistance greatly appreciated. 
    Thanks,
    Steve

    Team,
    Looking for some expert advice here - any assistance would be appreciated.

  • How do I change the color of the users name after they sign in?

    I am trying to change the color of the users name after they have signed in on the top right hand corner. When you hove over the login it shows up "Welcome (Users name) Log Out", The "welcome" and "log out" are in white and I know how to change them, but trying to find out how to change the name so it appears a different color is getting the better of me. Please help.

    Hi blackroseuk7,
    You can use firebug to inspect the element to see what div to target and from there you can set the color with CSS.
    Hope this helps!
    Carol - BCGurus.com

  • How can I apply a rule to an attribute in XML

    Hi,
    I have a simple XML file like this:
    <FitnessCenter>
         <Member level = "platinum">
              <Name>Jeff</Name>
              <Phone type = "home">555-1234</Phone>
              <Phone type = "work">555-4321</Phone>
              <FavoriteColor>lightgrey</FavoriteColor>
         </Member>
    </FitnessCenter>
    I would like to apply template rule (in XSL file) to an attribute �level� of �Member� element in the above XML, but I can�t get it to work. Below is the code that I thought would work, but it doesn�t. Can someone suggest the better way?
         <xsl:template match = "/">
              <xsl:apply-templates/>
         </xsl:template>
         <xsl:template match = "FitnessCenter">
              <xsl:element name = "FitnessCenter">
                   <xsl:apply-templates/>
              </xsl:element>
         </xsl:template>
         <xsl:template match = "Member">
              <xsl:element name = "Member">
                   <xsl:apply-templates select = "@*"/>
              </xsl:element>
         </xsl:template>
         <xsl:template match = "level">
              <xsl:element name = "I got here">
              </xsl:element>
         </xsl:template>
    </xsl:stylesheet>�
    regards,
    Janusz

    Thank you for the response � yep it works � thanks again.
    Now, that brings me to another problem I am facing now � because my �level� attribute is from another schema � in my real XML it looks like this xsi:type=�SomeNonAbstractType�. If I add the rule like this to XSL:
    <xsl:template match = "Member[@type]">
    <xsl:element name = "I got here">
    </xsl:element>
    </xsl:template>
    and I have in my XML element like this:
    <Member xsi:type = "platinum">
    <Name>Jeff</Name>
    <Phone type = "home">555-1234</Phone>
    <Phone type = "work">555-4321</Phone>
    <FavoriteColor>lightgrey</FavoriteColor>
    </Member>
    This doesn�t work � this rule simply does not get called � I have tried a couple of variations but couldn�t get it to work.
    Any suggestions would be appreciated.
    Regards
    Janusz

  • How to apply business rules with out breaking to patch missing data

    Hello Experts,
    I am very new to SQL And i have no idea how to apply below  rules
    Data is polling for every 5 minutes so 12 time intervals per hour 6:00  -->1
    6:05---->2
    6:50---->11
    6:55---->12
                      6:50---->11
    Missing value
    Patching
    Rule
    No values missing
    No patching
    0
    Time interval 1 is null
    Time interval 1 is patched with the value from time interval number 2 subject to this not being null.
    1.1
    Time interval 12 is null
    Time interval 12 is patched as the value of time interval 11 subject to this not being null.
    1.2
    Time intervals 1 and 2 are null
    Time interval 1 and 2 are both patched with the value of time interval 3 subject to this not being null
    1.3
    Two consecutive time intervals (excluding both 1 & 2 or both 11&12) are null e.g. time interval 3 and 4 are null
    Average the preceding and succeeding time intervals of the missing 2 values. If time intervals 3 and 4 are null then these become the average of time intervals 2 and 5.
    1.4
    Time intervals 11 and 12 are missing
    Time interval 11 and 12 are both patched with the value of time interval 10 subject to this not being null
    1.5
    Some time intervals between 2 and 11 are null with 6 or more non null time intervals
    Time interval is patched with the average of interval – 1 and interval + 1 subject to these not being null.
    For example if time interval 5 was null this would be patched with an average of time interval 4 and time interval 6
    n.b this rule can happen up to a maximum of 5 times.
    1.6
    Three consecutive time intervals are missing
    Set all time intervals for the period as null
    2.1
    More than 6 time intervals are null
    Set all time intervals for the period as null
    2.2
    This will be more info table structure
     CREATE TABLE DATA_MIN
      DAYASNUMBER    INTEGER,
      TIMEID         INTEGER,
      COSIT          INTEGER,
      LANEDIRECTION  INTEGER,
      VOLUME         INTEGER,
      AVGSPEED       INTEGER,
      PMLHGV         INTEGER,
      CLASS1VOLUME   INTEGER,
      CLASS2VOLUME   INTEGER,
      CLASS3VOLUME   INTEGER,
      LINK_ID        INTEGER
    Sampledata
    DAYASNUMBER TIMEID      COSIT     LANEDIRECTION    VOLUME    AVGSPEED PMLHGV    CLASS1vol  LINK_ID                                                                                                   
    20,140,110  201,401,102,315    5    1    47    12,109    0    45    5,001
    20,140,110  201,401,102,325    5    1    33    12,912    0    29    5,001
    20,140,110  201,401,102,330    5    1    39    14,237    0    37    5,001
    20,140,110  201,401,102,345    5    1    45    12,172    0    42    5,001
    20,140,110  201,401,102,350    5    1    30    12,611    0    29    5,001
    20,140,111  201,401,100,000    5    1    30    12,611    0    29    5,001
    output something like FOR above sample data
    DAYASNUMBER TIMEID      COSIT     LANEDIRECTION    VOLUME    AVGSPEED PMLHGV    CLASS1  LINK_ID                                                                                                                                                                                                                                                                                                                                                                                           
    Rule
    20,140,110  201,401,102,315    5     1    47    12,109    0    45   5,001                                                                                                
    0
    20,140,110  201,401,102,320    5    1    40    12,109    0    45    5,001                                                                                     
               1.4(patched row)
    20,140,110  201,401,102,325    5    1    33    12,912    0    29    5,001                                                                                        
             0
    20,140,110  201,401,102,330    5    1    39    14,237    0    37    5,001                                                                                        
              0
    20,140,110  201,401,102,335    5    1    42    14,237    0    37    5,001                                                                                      
            1.4(patched row)
    20,140,110  201,401,102,345    5    1    45    12,172    0    42    5,001                                                                                           
          0
    20,140,110  201,401,102,350    5    1    30    12,611    0    29    5,001                                                                                            
         0
    20,140,110  201,401,102,355    5    1    30    12,611    0    29    5,001                                                                                        
              1.2(patched row)
    20,140,111  201,401,100,000    5    1    30    12,611    0    29    5,001 
    Any help and suggestions to extend the code to achieve would be greatly appreciate.
    Note:Here the key value is Volume to be patched for missed time intervals
    Thanks in advance

    row_number() OVER (PARTITION BY LANEDIRECTION ORDER BY TIMEID) AS RN,DAYASNUMBER,(*to_date*(timeid,'yyyymmdd hh24miss')) as cte, COSIT,
    Are you in the right place? to_date is an Oracle function, and this forum is for Microsoft SQL Server which is a different product.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Processing in OSB after Replying to client

    hi,
    After receiving the input data from the partner, I'm validating it and I have to reply back to partner saying that xml validation is success or failure (Immediate response). If it is failure then I have to reply and stop processing, if it is sucess I have to reply and continue processing of the data afterwards. Will OSB continue flow after Reply activity in success case?
    Thanks
    Edited by: Aditya Ch on Nov 2, 2012 4:30 PM
    Edited by: Aditya Ch on Nov 2, 2012 4:31 PM
    Edited by: Aditya Ch on Nov 2, 2012 4:43 PM

    Thanks Prabu.
    If it is a failure case then it is not a problem (since I'm not going to do furthur processing I will reply).
    But if the validation is success, I have to send a immediate reply to partner saying that validation is successful and after that I shud do some processing on data. I do not have an option to use JMS in this case and moreover the process is synchronous. Is this solution feasible in OSB?
    Edited by: Aditya Ch on Nov 2, 2012 5:00 PM
    Edited by: Aditya Ch on Nov 2, 2012 5:12 PM

Maybe you are looking for