Colors are terrible and blurry BN out-the-box laptop

I just received my new satellite L305D-S5895 today and at start up the colors look are flush with red and blue and all the fonts are displayed kinda blurry. I've tried all different kind of resolution settings to try to fix this but the problem stays the same. Should i return it. Help guys!

deftrhiney wrote:
I just received my new satellite L305D-S5895 today and at start up the colors look are flush with red and blue and all the fonts are displayed kinda blurry. I've tried all different kind of resolution settings to try to fix this but the problem stays the same. Should i return it. Help guys!
A brand-new notebook should 'just work' right out of the box.  I'd return the defective one you got and get a replacement.

Similar Messages

  • HELP !  why doesn't color picker select specific color ? i make secondary layer and use the tool but no colors are selected and the gray out menu shows nothing !

    HELP !  why doesn't color picker select specific color ? i make secondary layer and use the tool but no colors are selected and the gray out menu shows nothing !
    what am i missing ??!!

    Please add you system info and SpeedGrade version and build number if you actually want help.

  • Canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors

    canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
    i have prfiled the mac and printer wiht colormunki and uplodated the profile sucessfully
    i set the printer to correct icc profile
    print out comes out same with glazed colors and missing tones/colors
    however when i use the same printer on windows and with light room, following same icc profile, colormunki calibrated profile, the print our are excellent.
    i have also tried using printer manage profile using the Mac and Aperture and get same poor prints
    can  you please assist and thanks

    I've a Pro9000 and also use Colormunki successfully.
    When I use Colormunki, I calibrate both of my monitors and the printer/paper combination. Colormunki saves the generated profiles to the correct places -- I don't load or change any profiles after that as that would mess-up what the Colormunki had just done for me, and this would likely mess-up the prints.
    Though I double-check the settings in the print dialogue, the choice for the printer handling things is already grayed-out. Colorsync handles it all just fine.

  • I have gone out of my way to buy an iPad 2 and you're telling me that I cannot have Siri, as you know iPad's are expensive, and you'd expect the newest updated whenever available. I am not a happy customer and will not but from Apple again.

    I have gone out of my way to buy an iPad 2 and you're telling me that I cannot have Siri, as you know iPad's are expensive, and you'd expect the newest updated whenever available. I am not a happy customer and will not but from Apple again.

    Lloyd Northover wrote:
    I have gone out of my way to buy an iPad 2 and you're telling me that I cannot have Siri, as you know iPad's are expensive, and you'd expect the newest updated whenever available. I am not a happy customer and will not but from Apple again.
    If you want to use the "newest updated whatever available." then you would have to buy the newest hardware that supports that. iPad 2 is not the newest hardware available and it can't/does not support siri.

  • I upgrade to ios7 today and now when I try to speak out a messae in messages or use siri niether works siri says it cannot take request right now, and messages just clocks and never types out the message, what happened?

    I upgrade to ios7 today and now when I try to speak out a messae in messages or use siri niether works siri says it cannot take request right now, and messages just clocks and never types out the message, what happened? Has anyone else had this issue today?

    What you are experiencing is 100% related to Malware.
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • HT1338 I try to buy songs itunes but there is a message stating that my disk is full and to empty out the trash can. But i don't know what disk it speaks of?

    I try to buy songs itunes but there is a message stating that my disk is full and to empty out the trash can. But i don't know what disk it speaks of?

    The "disk" is your startup volume, which is usually called "Macintosh HD" (unless you changed it).  Your iTunes media files (such as song files), and basically everything else, are stored on that volume (unless you changed it).
    You should create some free space as soon as possible, because the system (OS) and applications use free space to write temporary files as part of normal operations.  If there is very little free space available, your system may start to bog down and feel slow because it's not running efficiently.
    You can empty whatever is currently in the Trash by doing a click-hold (or right-click) on the "waste basket" icon in the Dock, and selecting Empty Trash.  A good place to look for files you may no longer need is your Downloads folder.  There is usually a link to your Downloads folder in the sidebar of a Finder window.  (The folder itself is located in your user home folder.)
    You can see how much free space you currently have by selecting Macintosh HD on your Desktop (or in the sidebar of a Finder window), and selecting Get Info from the File menu.  You can also right-click on it and select Get Info from the menu that comes up (or hit Cmd-I on keyboard).  The Info window shows Capacity and Available for the volume.  Available is the free space.  It would be best to keep Available at least 10% of Capacity; getting it to 20% or more would be better.
    If you can't free up enough free space by deleting things you do not need anymore, you should get an external hard drive and save some your files there.  That's actually how I run my iMac; most of my user files are stored on external USB and FireWire drives.

  • A few days ago i small piece of plastic got stuck and subsequently fell out the charger hole of my ipod classic, although it still connects to itunes and syncs itunes says it has synced but there is nothing on my ipod! Nothing seems to work! HELP! :/

    A few days ago i small piece of plastic got stuck and subsequently fell out the charger hole of my ipod classic, although it still connects to itunes and syncs itunes says it has synced but there is nothing on my ipod! I have done this a few times and nothing seems to work! HELP! :/

    Transfer all of your content to the computer:
    Tunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    http://support.apple.com/kb/HT1848
    Then try turning the device off and on again. I'd leave it off for 10-15 minutes, but that is up to you:
    http://support.apple.com/kb/HT1430
    If the item is still there, you may need to restore the device:
    http://support.apple.com/kb/HT1414
    Hope that helps . Worst case scenario, you may need to write into iTunes support to see if they can also help!!

  • HT4528 I have a verizon iphone 5c and I took out the SIM card just being curious and put it back in, now I can only use my phone on wifi and I can't use 4G or LTE strictly wifi. How can I fix this?

    I have a verizon iphone 5c and I took out the SIM card just being curious and put it back in, now I can only use my phone on wifi and I can't use 4G or LTE strictly wifi. How can I fix this?

    Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears? If that doesn't work, try resetting the network settings. Settings>General>Reset>Reset Network Settings.
    If that fails, you may possibly have damaged the SIM. Verizon will need to give you a new one.
    Best of luck.

  • There is an unclosed comment block in the SQL statement. Ensure that there are balanced "/*" and "*/" comment markers in the SQL statement.

    I get this error - when I try a Multi-line comment entry - by using the /* and */
    "There is an unclosed comment block in the SQL statement. Ensure that there are balanced "/*" and "*/" comment
    markers in the SQL statement."
    Even though I am entering both the /* and the */.
    I tried it many way - in the same line, in different lines etc..
    like 
    /* Select xxx from xxx */
    or
    Select xxx from xxx
    or 
    /* Select xx from xx
    Please help anyone..! ;=(

    But When I do a Help/About I see that it is 
    the SSMSE's Help About screen says "SQL Server 2005"
    However I downloaded and installed SQL Server 2014 last night and was entering queries..
    Most Select Queries work fine..
    the -- comment line works fine..then I stumbled on the /*  - */ does not work.
    Thanks.
    Well, you have two different version of SQL Server installed on your machine. Please connect again from SSMS to the SQL Server 2014.
    T-SQL Articles
    T-SQL e-book by TechNet Wiki Community
    T-SQL blog

  • Are you supposed to clear out the all document section, which seem like a big garbage can?

    Are you supposed to clear out the all document section, which seem like a big garbage can?

    Eh? Documents is a folder. You keep your documents in it. Or do you mean this thing...
    That's the Trash, it's where you put stuff that you no longer want.
    Yes, you are suppose to empty it occaisionally.

  • When I get a message it only vibrates even though all sounds are on and when someone calls the sound works perfectly normal.

    when I get a message my iphone 4s only vibrates even though all sounds are on and when someone calls the sound works perfectly normal.

    Try a reset. To reset the iPhone, press and hold the home and sleep/wake buttons until you see the Apple logo (ignore the slide to power off prompt). If that doesn't work, perform a Restore via iTunes (from backup).

  • Does anyone know why I am having formatting issues with my tablet and phone sites? I only have the desktop layout. There are banners and footers not reaching the edge of the screen.

    I only have the desktop layout. As I was having such problems with the tablet and phone layouts. However there are banners and footers not reaching the edge of the screen. This is only a problem when accessing the site via a phone or tablet.
    the site is www.excellententertainment.biz
    Cheers
    Hughie

    Do a Select all on your pages (Most likely a master page if it effects all pages) and you will likely find an empty element or element that extends past the design edges in your desktop design.

  • I upgraded to the new version "4" and it will not load any websites..."unable to locate server" is all i get and cannot figure out the problem ....had to delete and go back to an earlier version whichi understand is unsafe...what to do?

    # Question
    I upgraded to the new version "4" and it will not load any websites..."unable to locate server" is all i get and cannot figure out the problem ....had to delete and go back to an earlier version which i understand is unsafe...what to do?

    That was probably caused by your Firewall blocking the newly installed version of Firefox.
    No known security issues with Firefox 3.6.17, which was just released this past week.

  • Page 4 of 6 of the actual library storing apps has frozen; effects all apps on that page-all other pages are fine and accessible just not the apps on this page; wont even toggle and give the option to delete when i hold down on a an app. Any ideas?

    Page 4 of 6 of the actual library storing apps has frozen; effects all apps on that page-all other pages are fine and accessible just not the apps on this page; wont even toggle and give the option to delete when i hold down on a an app. Any ideas?

    this is similar to your question.just go-through it or if you stuck then reply back for more info on this problem : https://support.mozilla.org/en-US/questions/974711

  • Just got touchsmart 610 and right out the box webcam don"t work

    just got touchsmart 610 and right out the box webcam don"t work

    mmcrae304:
                Hello welcome to the HP forum. You have two options you can contact HP Direct Support and have them fix or just take it back to the store where you bought it and exchange it for another one. It came with a one year warranty.

Maybe you are looking for

  • [Forum FAQ] Schedule multiple versions of System Image Backup in Windows 8.1

    As we known that there is no UI for user to configure Image backup in Windows 8.1, this is a guide for your to schedule multiple versions of System Image Backup. Step 1: Create a task to schedule an image backup with following command: SCHTASKS /Crea

  • How do I add my name to the camera data file in meta data?

    When reviewing the meta data on my photos I see the camera model number, serial number, focal length, etc.  The camera owner field is blank.  How do I add my name to the camera owner field? I'm using Photoshop CC, on a windows 8.1 Pro platform.  Any

  • What do I port serial driver to Intel Solaris8?

    How do I port a serial driver from linux to intel solaris8 ? Because I can't find the serial driver sample, so it is difficult to make it work in intel solaris8. Are there someone knows how to handle? or any suggestions? Thanks.

  • Rebate that is not match

    Hi SAP Gurus, Please help with the following issues: In Bill Back agreement, does the actual payments, Accruals Reversed and Accruals should be equal with each other? If yes, How? If not, what are the instances that makes them not equal with each oth

  • How could I arrange control images in a report?

    I appended 4 control images to a report using Append Control Image to Report. I wanted to lay two of these images in the first line and the other two in the second line. But the result of my program was one image in one line. (BTW, I did not use any