Colors changes on screen

OK guys I have a question? I just started to notice that I every time I press the menu key or even the a green phone key there are waves of color on the screen. Its almost like putting your finger on a plasma screen and watching the colors change.
but it only wants to do it when on certain times, not all the time!
what can I do to prevent from a major problem?

sounds like it could be a display issue
try removing the battery with power on and then replace... wait for reboot
>>>>>>>>>>>>>>>>>>>>>>>>~
Hope I was able to help
If you have received information that has helped you out, please give them Kudos.
If your problem has been solved, please click on the post that resolved the issue

Similar Messages

How to change the background color of a screen field

Hi All,
I have created a screen, in the output, the fields in the screen are having same color with the screen.
My client want the fields to be in the gray color.
For more clarification,
Goto SE11, Enter any table name, Click on display
In the next screen, observe the fields
Name, Short text, Last changed, Status are in the same color with the screen. Where as their values...
MARA, Material Master: General Data, etc are in the screen with gray background, I want in that way.
Any hint...
Thanks,
Kal Chand

hi
As i understand, in your scree u have taken "pushbutton" instead of taking "I/O field"
So make ur fields to "I/O fields"
Reward if it is helpful.
Thanks
Siva Kumar

Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

I'd take it into my local APple store and have them look at it. There may be something wrong inside your device.

How to change the color of SAP screen?

Hi Frens,
I know it has nothing to do with SD Community, but still I am asking. Can anyone tell me "How to change the color of SAP screen?" It is needed especially when you are working on System Landscape including PRD, Qua & Dev. There are chances that you end up making a test case in PRD instead of Dev or Qua. To avoid that, different color of SAP screen may be very useful and safe.
Regards
Vikas Chhabra
SD/CIN Consultant

We had a clone of SAP for testing
Only GUIXT solution was available for users to distinguish between real Prod & Clone as SID was same
Created 2 scripts n C:\guixt\scripts
saplsmtr_navigation.e0100.txt
Esession.txt
BOTH having identical code
if V[_ashost=10.3.3.18]
TitlePrefix "CLONE18"
TitleSuffix "(CLONE8)"
endif
if V[_ashost=10.3.3.25]
TitlePrefix "PROD25"
TitleSuffix "(PROD25)"
endif
After much research - this was only solution.
GUIXT will be around; like SAPSCRIPT & SMARTFORMS
despite the enticement of Adobe Forms!
After some time you may set GUIXT profile start window HIDDEN
This you do by clicking profile button of GUIXT menu
If you want to see GUIXT Window again
CMD.exe Dos prompt
cd C:\Program Files\SAP\FrontEnd\SAPgui
guixt visible
Regards
Jayanta Narayan Choudhuri
Kolkata
URL: http://ojnc.byethost11.com

HT2506 Change Full Screen Mode Background Color in Preview

Is it possible to change the background color in full screen mode from black to white?

It is not set up to make this change in Full Screen Mode.
However you can change the background of the open file by Preview>Preferences>General>Background Color

Background color change option for box in screen painter

have created a box in screen painter . is there any option to change the back ground color of this box.
please help

No, you can not change the background color of your screen painter box.

I have irlen syndrome and I want to change the color of my screen blue e.g.. Like my overlay

I don't know how to change the screen of my blackberry blue but I don't just want it blue but when I go on the internet that it will automatically change blue is well .... Am getting my eyes are hurting and I can't see the words on the screen I would like to change it to my color please if this is at all possible thank you.

Did you consider changing the theme of your device? Follow the steps -
1. From the Home screen, press the Menu key.
2. Click Options.
3. Click Theme Options.
4. Click a theme.
5. To change the layout of the theme, in the Set Home Screen Layout section, click an option.
6. Click Save.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Minor screen color changes when background in tota...

I just got myself lumia900 and i found that my lumia screen at the bottom corner left part have the color changes a bit instead of having full black color background... As if the screen is leaking..
Dont think its normal, but anyone has the same experience??

Hi lumia900_ina,
Thanks for your feedback!
As the Lumia 900 has an AMOLED screen it does not use backlighting. If you do notice some bleeding from e.g. the backlighting for the Windows Phone buttons I suggest you contact your supplier or visit a Nokia Care Point for further assistance.
Hope the helps,
Kosh
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

How do i change software screen colors?

How do i change software screen colors?

You cannot change the colors of the application frames within Photoshop Elements. Some parts of application frames can be changed by your OS display settings.

HT201269 I have an iphone 4 and the screen is jumpy and after a liitle while the colors change, has anyone else had this happen and what did you do (if anything) to fix it?

I have an iphone 4 and the screen is jumpy and after a liitle while the colors change, has anyone else had this happen and what did you do (if anything) to fix it?

Read: http://support.apple.com/kb/TS4436
It is pretty short so here is the entire text:
Symptoms
A purplish or other colored flare, haze, or spot is imaged from out-of-scene bright light sources during still image or video capture.
Resolution
Most small cameras, including those in every generation of iPhone, may exhibit some form of flare at the edge of the frame when capturing an image with out-of-scene light sources. This can happen when a light source is positioned at an angle (usually just outside the field of view) so that it causes a reflection off the surfaces inside the camera module and onto the camera sensor. Moving the camera slightly to change the position at which the bright light is entering the lens, or shielding the lens with your hand, should minimize or eliminate the effect.
Which is exactly what eelw wrote.
No one on Apple Support Communities has authority to speak on behalf of Apple, unless their avatar is accompanied by this Apple image:
... identifying themselves as Apple employees.

IPhone 5c has lost its color. Everything on screen is gray. I have already checked "grayscale". Button is not "on". I downloaded latest software about a week ago but today is when color changed. Any help?

iPhone 5c has lost its color. Everything on screen is gray. I have already checked "grayscale". Button is not "on". I downloaded latest software about a week ago but today is when color changed. Any help?

Hi ..
Try a reset.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.

Why have colors change in new update? And won't allow me to permanently change back - as they revert on their own?

My iCal calendar colors changed by themself. I have gone to "edit" and "get info" and have changed the colors back. Within minutes, they change back to the wrong color. It has now made these same changes on my iPhone 5 and iPad mini. What's going on? How do I permanently change these colors?

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

Color change in Sales Order

Hello Expert,
One of the user has a strange problem. His sales order document shows different color on screen than other options like AR Invoice or Quotation, it comes in pink color. I am trying to find way to bring back to default but unable to find from where he has changed it. User cannot remember either.
One option was document settings in Admin module but there color option is not mentioned.
Can anyone contribute.
Regards
Deepak

Hi Deepak.......
It has separate setting for that. If you want to reset the color of this screen then first Open Sales Order and then go to Wndows in Menu Bar> Colors> And set to default (Classic)......
This will reste the color of the Sales Order.......
Regards,
Rahul

Only 16 colors on the Screen

Hello all together
I am a new Mac user and I am very happy with it for a few weeks. Suddently, and I do not know what I have changed, the Screen only shows 16 colors (i guess).
When the Macmini starts from Power of all seems to be ok, till the Dock comes up. I can see, that the colors of the Dock are ok for a Second. Then, when the Desktop ist build, the Display changes to that problem-screen and there are only very rare colors. It is hard ore impossible to read grey text.
In system - settings - Disply the Resolution is set to 1280x1024, the colors to 16,7 Mio.
The Display ia a BenQ T904.

Where can I get a list of all Keyboard Shortcuts?
This site has a great list of keyboard shortcuts:
http://davespicks.com/writing/programming/mackeys.html
...but I don't think it's "all" of them!
-Doug

PDF CMYK TIF Color Changes on "Reduce File Size"

I run a Mac G4 MDD w/1GB Memory and OSX 10.4.11. Use Acrobat Pro 8.1.2 for PDF viewing, manipulation, forms, making large size files smaller, etc. Recently, I noticed an odd color change on one of 72 ads I am doing for a small 24-page publication. The background image of the ad is a CMYK TIF file placed in a QXP 7.3.1 document. After working on a revision to a previous ad, using the same set-up in QXP, the ad I created, using Output to PDF, opened in AcroPro correctly rendering the ad and background as the other 31 ads I had been working from or on. All the ads are different and have different backgrounds as well. Each ad opened in AcroPro has been made smaller by selecting "Reduce File Size" with no changes to color, drop shadows or text. But, when I selected that (RFS) menu for the 32nd ad, that background color changed completely to a lighter and much more contrasty image. I checked the TIFF background file in PS CS2 to see if it was CMYK or any different than the others. It was like the others, properly rendered and saved, but was much deeper in color. I went back into QXP and noticed the TIFF file in question had a 30% opacity selected to the image. I thought if I saved the original TIFF in PS with a screen tint overtop and flattened to the same look as the intended ad that would solve my problem. I placed that new TIFF background into the ad in QXP and made sure the opacity was 100% and output PDF as I had previously. Unfortunately, the ad turned out exactly the same with the same color shift. There must be something else causing this color change to occur, so if someone else has experienced this and can suggest an answer or posting that may help please advise. Thanks

Cathy,
You have posted your question in a forum dedicated to the Final Cut Studio application Color. It is a very specialized program to grade (adjust) the color in video/film images. We know nothing regarding PDFs.
Have you tried posting this on an Adobe support site?
Good luck,
x

Colors changes on screen

Similar Messages

Maybe you are looking for