Colors Don't Match

When i print a color picture from iphoto or from Photoshop CS3 the colors dont match. Am i only supposed to use color lok paper? I'm using HP Premium Plus Glossy paper. My software is up to date and I did a verify and repair in the color sync utility. There are 136 profiles, it found 1 bad file that can't be fixed. Said the tag size is not correct, has a bad Macintosh string. What steps can I take to get the colors synced? I had a 6 year old photosmart 7620 before the envy, and someone on the forum suggested buying a new printer because of old and outdated color profiles. Any help would be appreciated.

Hi @Lommarti
Although HP does not support Photoshop, I was able to find something that might help; How to Convert RGB to CMYK in Photoshop.
If you can print from other programs without any issue, then you might consider contacting Adobe for help adjusting your color settings further.
You can also use the following document to ensure the printer is not at fault; Fixing Print Quality Problems for the HP ENVY 5640, 5660, 7640 and Officejet 5740, 8040 e-All-in-One....
i hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

Printing from InDesign and Photoshop - colors don't match

I'm printing the same CMYK image from Photoshop and from InDesign, to a HP desktop color printer. I'm using CS3, all the color settings are identical in both programs, but the printed colors don't match. Any suggestions would be greatly appreciated.
(cross-posted in InDesign forum)

I have had the same problem: an image printed from PS differs from the same image printed from ID. However, I can't very well print as bitmap from ID since the image is part of a spread, including text. I have tried various combinations of settings. I made the PS image to 100% of the ID final size (in the layout). I tried various print dialogue settings (high transparency flattener, medium transparency flattener, color managed, not color managed, CMYK output and leave unchanged ... every combination I could think of). ID does something on printer output. My understanding (at least from CS2) was that ID output to printer uses a PDF format of some sort. I had the idea maybe the ID output did some sort of resampling or re-rendering of the image, but have not prooved that out. I did get some slight improvement in the ID output when the image in the ID layout was put in at 100% (whereas it had been 88% (the original image being bigger than the ID layout size). What I am getting now in CS3 is a clean looking photo in PS, but in ID, skin tones look somewhat blotchy and a bit more saturated. The PS image is better than ID, and while ID is not bad, why is it not as clean as PS? I can definitely see the difference between PS and ID output and know it will show on press, too. Any suggestions?

Colors don't match when printing pictures on J4860 all-in-one

When I print pictures, the colors are not true. It doesn't matter what software I use, but usually it's Photoshop CS3. I thought it was my monitor - that I wasn't seeing the true colors in my files. But I've been able to verify that the colors on screen match the subject in the photo. The prints from the HP J4860 do not match the screen images. I currently have new ink, and they are new HP cartridges, not generic or refilled cartridges, but this has been a problem through many ink cartridge replacements.

Hi there.
I don't know if there is much we can do to improve your output. First off, I want confirm you are using an OfficeJet J4680. We don't have a J4860.
Could you post an image that is unsatisfying, and let us know what you dislike? I'm going to involve a color expert here, and he'll look to see if we can do anything.
regards, CF
I work for HP and hope to make your day Sproutastic!

Colors don't match between PS and AI (CS 3)

CMYK images are displaying differently for me between PS and AI. In PS when they look "good" (and print similarly on my profiled Epson), in AI they look more contrasty and saturated, with a little color shift in the greens (towards blue).
My monitor is calibrated with a Monaco Optix, and I notice the difference between apps both on it and on my MacBook Pro screen.
Image profile is the standard SWOP v2. In AI, the document profile is SWOP v2. "Proof Colors" is unchecked in both apps. (If I check it, by default AI is radically different because it defaults to simulating black ink. Disabling this causes Proof Colors to have no visual effect.)
I asked this already in the AI forum, and the answer I got is basically "they should match, they do for me". I noticed elsewhere on this forum that AI and PS were different in color management, or rendering, or something, but didn't see much info beyond that.
I figured there were enough color hounds on this forum to set me straight.
- Bob

With a properly calibrated and profiled monitor, and with correct color settings in both programs, trust Photoshop's colors over Illustrator's.
This may have changed in CS4, but in CS3 Illustrator hadn't caught up with Photoshop in regard to color management.

Pages, monitor colors don't match printed colors

Hey Everyone,
I'm new to this mac world, and boy do I feel like a newbie. I'm trying to use Pages to print some nice brochures. I have a Savin commercial color Laser CLP27DN, 1200 dpi
When I print the default color templates from Pages, It prints colors just like the monitor, beautiful. When I have a graphic artist send me a high res PDF it prints just like the monitor, beautiful. This makes me think the printer and monitor are synched correctly.
When, I try to print my own designs, the colors are off about 2 shades. And, the photos are a little darker when printed.
The printer supports colorsync. I believe I have installed the colorsync profiles correctly. Since 2 types of jobs print beautifully, I've got to believe it is a pages problem.
Applecare was very little help, they don't support colorsync. It's kind of ironic, I bought a Mac to ramp up my graphic designs.
I'm beginning to think Pages is a low end graphics program, and I should buy and buy a professional package that is not too hard to learn.
Any thoughts or suggestions are greatly appreciated.

I don't know the answers to the things you list, but I had a similar problem which I addressed by selecting all of the graphics the document at once and then adjusting the opacity to 80% before printing. When printed on white paper, it brightened the colors up considerably. It may not be the permanent fix for the issue, but it helped me get the work done.

Image Trace colors don't match selected color group. (Mac, CS6)

When I select the Document Library option when making a color image trace, the colors shift in the image but do not match the selected color group. I've tried multiple color groups, and the colors always change, but never match the selected swatches. Is this typical? Can anyone explain this?

After some additional experimentation, I discovered the problem was with images dragged from iPhoto and dropped into an illustrator file. When I placed the files instead, the colors matched the selected color group. After trying several other images using both methods, it appears as if dragging and dropping from iPhoto is a no-no when wanting to image trace and change the colors.

Lightroom exports to photoshop colors don't match.

I have been using lightroom for a while, but just recently started using photoshop. It doesn't matter what color profile I choose during export, red colors have less saturation in every case.
I'm sure there is something really simple I a missing, I would appreciate any help.
Thanks,
Mike

>I did set the I am using the manufactures color profile
Never use a manufacturer's profile. They are almost without fail corrupt and trip up Lightroom. You need to calibrate the screen with a hardware calibrator. Failing that the next best option is to software calibrate if you have Mac OS X, or use sRGB as the screen profile for windows by deleting the profile from the monitor's properties. This will almost certainly solve your problem. It is either this, or the dual monitor setup (see below)
>If I select Monitor RGB from the proof setup the results are terrible, I need to use the Custom setup, and uncheck "Preserve RGB numbers."
That's normal. That option is basically useless, what it does is show you what the image would look like if you wouldn;t color manage at all. i.e. if you send the RGB data from the file directly to the monitor. This should only work if you have a sRGB image for most monitors. When you uncheck "preserve RGB numbers" you are doing what is called soft proofing. However, since you're proofing to the monitor profile you will not seen any difference than without the softproof. You might try the softproof to the monitor profile (uncheck preserve RGB numbers) and set it to use perceptual rendering. This probably looks very much like what you see in Lightroom. Lightroom uses the perceptual rendering intent for your monitor profile.
>Interestingly, I noticed that the output appears to match when I use my laptops LCD, there is only a problem on my external monitor.
Here might be your problem too. Lightroom sometimes uses the wrong profile in dual monitor setups depending on what monitor you select as the main screen. Also, many windows machines do not deal correctly with different profiles for different screens. Be careful with dual screen setups if they are not the same type.

Z1 viewfinder colors don't match captured footage on TV and FCP

Hi.
I shoot underwater on a Sony Z1 and white balance using the viewfinder to what seems a satisfactory result. However, once captured, the colors of the footage on both the Z1's LCD and its viewfinder simply do not look like the colors in FCP or on any monitor (neither broadcast monitor, nor regular TV).
This is especially exasperating on days when the water has a greenish tint. When I white balance to make it more blue, it does appear blue in the viewfinder while shooting, but then turns out as green on tape (like it actually is).
I'm not able to shoot colors properly if I can't rely on what the viewfinder shows me. We've checked the Z1 manual and tried all sorts of things (color extract etc), but the only thing one seems to be able to do about viewfinder colors is adjust saturation and brightness. Not hue or such. Anyone know details about Z1 color settings?
Or could this have to do with the capture settings? I shoot 1080i50 and use the same HDV-1080i50 Easy Setup in FCP.
We want to avoid color correcting the HDV material too much in post, so I'm trying to get the best result whilst shooting.
Any ideas gratefully appreciated.

I think Zeb means match the image on the LCD to that on the monitor.
However, remember that underwater you have two issues to contend with: the LCD image has to pass through your underwater camera housing, through water and your mask before you see it. All that affects colour.
Seconds, more importantly, the deeper you go, the further towards the blue end of the spectrum your ambient light shifts. You need to white balance regularly, not just once. When you change depth, when lighting conditions change etc.
Take a look here: http://www.kenstone.net/fcphomepage/white_cardsdouglas.html
Useful info on Warm White cards.
And here:
http://www.timsaxon.co.uk/Uwvideo.html
For filter info.
Basically, ignore your LCD as a reference for colour and make sure you white balance regularly. Whatever setup you do on the surface will change the moment you're in the water.
Edit: Also, to make life easy, consider topping each shot with an underwater reference chart and correct to that in post:
http://www.bhphotovideo.com/bnh/controller/home?A=details&Q=&is=REG&O=productlis t&sku=330876

HTML and Flash colors don't match, need help...

Heya,
So if you visit
http://www.zachmarrow.com you
will notice (at least on Firefox and Safari on OS X) that the
colors in the .swf and the colors in my actual html document are
not the same. I haven't encountered this problem before so after
triple checking my hex numbers for the colors and so on I cannot
find a solution can someone please help!
.fla is located here:
http://www.zachmarrow.com/templates/wiuthl5s/flash/header.fla
The index file is located here:
http://www.zachmarrow.com/templates/wiuthl5s/index.php
Thanks!

http://www.adobeforums.com/webx/.59b52c9b/0
Peter Figen, "color management, printing with InDesign CS3" #1, 6 May 2008 7:45 am

CS2 Bridge vs CS3 Bridge = Colors don't match

I was wondering why a JPG of eyewear with clear lenses shot on a white background and which have no color cast whatsoever displays with a light pink cast in Bridge 2.1.1.9 and displays it's normal 'neutral tone' in Bridge 1.0.4.6 ?
The folder they're in has both CMYK and RGB (sRGB) versions of the same product shot and only the RGB ones display with a noticeable pink cast in CS3 Bridge. High quality thumbnails is turned on and when I open the image in PS10 it's fine. The lens' RGB value in the affected area is neutral and pretty close to 232/232/232. There are no color casts anywhere.
As a test I just created a 232/232/232 box on a white canvas and saved it as a JPG. I've discovered that if I save it as a progressive JPG the 232/232/232 box displays as light pink on a white background in Bridge 2.1.1.9. If I save it as a Baseline (Standard) JPG it does not have the false pink cast. The same test images all display correctly in Bridge 1.0.4.6.
Is this a known issue or something particular to my system?
Russell

Hi @Lommarti
Although HP does not support Photoshop, I was able to find something that might help; How to Convert RGB to CMYK in Photoshop.
If you can print from other programs without any issue, then you might consider contacting Adobe for help adjusting your color settings further.
You can also use the following document to ensure the printer is not at fault; Fixing Print Quality Problems for the HP ENVY 5640, 5660, 7640 and Officejet 5740, 8040 e-All-in-One....
i hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Colors in Photoshop and InDesign don't match when printed

Output colors in InDesign and Photoshop (CS4) don't match. How can I calibrate? (I can choose a Pantone color for a Photoshop element that I've used in an inDesign document, import it into InDesign, and when I print, the colors don't match)
There must be a way to calibrate the colors among the CS4 software.....
(Mac OS 10.6.4 on 27" iMac)

That's what 'synchronised' means... as has been mentioned. Looks like you need to read a few colour management threads.
If you are picking color from the Pantone Libraries, you can easily get mismatches even with synchronized color settings. In ID if you leave Ink Manager>Use Lab Vales unchecked, the Pantone Solid libraries are defined with CMYK values, while in Photoshop the solid swatches are always defined as Lab values. So, if you pick a color like Pantone Solid Reflex Blue in ID, and then open a Lab, RGB, or CMYK file in PS and fill with Reflex Blue from the same library, you'll never get the default ID Reflex Blue build of 100|73|0|2 whether you are sync'd or not.
If you are actually outputting spot colors—the PS color is Duotone or a channel—then Use Lab should always be checked in ID and Color Settings would have no effect because ID doesn't have spot color management.
If you restrict yourself to the Pantone Process libraries, then you can work in CMYK mode in PS and get matches. In that case color settings might come into play if you embedded a CMYK profile in PS that conflicted with your ID doc's CMYK profile, but even in that case it's the assigned profiles that matter not the current color settings.

Colors of imported illustrator files don't match indesign colors

I'll be honest: I'm likely missing something really basic. This is really frustrating, though.
The simple version: when I drag an Illustrator file into my InDesign document, its colors don't match the colors of shapes in the InDesign document drawn with the same color values.
The long version:
I'm working on a resume document. I've created a logo in Illustrator - the document is in CMYK color mode and uses SWOP v2 color space. I've dragged the file into InDesign, where I have some basic geometric shapes that intersect the logo. The InDesign document is also set to CMYK and is using the SWOP v2 color space. I've noticed, however, that the colors of my logo (which, again, was imported from Illustrator) do not match the colors of shapes drawn natively in InDesign even when their hexadecimal color values are identical. To further this point. I created a shape in InDesign with color #86c8cf. I then copied the value #86c8cf into Illustrator and drew a shape using that color. I imported that Illustrator shape into InDesign and placed the Illustrator Shape and the native InDesign shapes side by side. I even exported to PDF and pulled it up in preview to proof it. The colors, while very similar, are NOT the same color.
Am I missing something really obvious? Or are these two programs not at all working together like they're always said to do so well?

Dunno why. Which versions of ID/AI? Not that it should matter, I get the same results with CS6 and CC2014.
One square in ID is native, the other from a placed AI file--though drag and drop are the same results.
Acrobat, hovering over one square...
And over the other square...
I used your hex values in Illy, used Illy's CMYK values in ID.
Mike

Aperture 2 previews don't match

I just got my upgrade aperture 2 and I have noticed on larger projects the previews don't match the image above.
what gives?

What do you mean by "above"? I'm not quite sure I'm understanding the exact issue you are seeing - and by "not match", are the colors just slightly different or are you seeing an entirely different image (that is, when selecting a thumbnail the viewer shows a different image which is what I think you may be saying).
One solution is to try either "Generate Thumbnails" or "Update Previews" across the whole project. I'd start with "Generate Thumbnails". I think there is a key modifier to have it force the Preview update even if one is already there, it may be option.

Background patterns don't match using Layered Paper template in iWeb 09

The background patterns for the Layered Paper template don't match. They look okay when I'm using iWeb but are two different shades when posted online.
See:
http://web.me.com/vizcabulary/Johnson/Home.html

I created a quick test page with that theme and have no problems with it. You might try selecting a different theme and then go back to the layered theme. Are you using that theme without messing with the options regarding choosing the background image/color/etc?
OT

Color picker color does not match object color - CS3

Hi - in RGB Illustrator doc, when I select RGB color in color picker and assign to object, the color in the object is not the same as the color I selected from the color picker.
I think its related to view>>proof colors because if I proof using my LCD monitor colorspace, the color in the object and the color picker match but then they don't match the color in the palettes color box.
But that's a kludge because ultimately I want to proof color onscreen using my color printer profile.
has anyone seen this? Never had this problem with CS2.
Using CS3 with Leopard.
Thanks

Hi,
What you describe we recognized in Photoshop. We solved the issue going to the Paint Bucket Tool.
There you can select e.g. Anti Alias, Contiguous, All Layers. With selecting (ticking) the option 'All Layers' the problem was solved. The options Anti Alias and Contiguous were already selected.
Good luck!!!
Lissa
For some reason it seems impossible to have B_u_c_k_e_t typed into the message. The word is replaced by stars.

Colors Don't Match

Similar Messages

Maybe you are looking for