Colors dropping out of a 2 color job between reader version 8 and 10

We're having an issue displaying colors correctly between versions.
We have distiller 8 windows, creating a 2 color pdf.  When I open it on my XP PC running reader version 8, everything looks great
When another user running an XP PC opens the pdf it looks fine, but when you go to print it, the second color drops out of one of the images on the print preview screen.  this person is running Reader version 10.0.1.
When another user opens the pdf the color is dropping out of both the pdf itself and the print preview.  We do not know what version that user is using.

Also, the pdf looks fine on my Mac opened in Preview.

Similar Messages

  • The connection between my iMac (8.1) and Airport express keeps dropping out all the time., The connection between my iMac (8.1) and Airport express keeps dropping out all the time.

    The connection between my iMac (8.1) and Airport express keeps dropping out all the time., The connection between my iMac (8.1) and Airport express keeps dropping out all the time.

    Hi BillCilla,
    If you are having intermittent but persistent drops in AirTunes via your AirPort Express, you may find the following article helpful:
    Apple Support: AirTunes audio stream drops or cuts out
    http://support.apple.com/kb/ta21538
    Regards,
    - Brenden

  • Sony Vaio F Series Screen Colors Brushed Out

    Hi, Im running Windows 7 Home Premium on my Vaio VPCF235FG, I did windows recovery but the colors seem brushed out. I did update my Nvedia Driver but still same issue. I did some researches on google and I found out it has to do with Monitor LED not getting enough power to give full color depth something like that, but I dont know which driver or software patch I have to download to fix this issue. Please help

    Hi Hu22aM,
    Welcome To Sony Community!
    We're sorry to hear this. I have few questions for you to help me understand what's really going on.
    When did it star to happen?
    May I know why you needed to do windows recovery? Is this when the computer went back to factory setting?
    If so how did you do it, was it using a recovery disc or through the partition ? 
    Let's try to isolate the issue
    Turn of the laptop
    Go to BIOS by repeatedly hitting F2 right after you turn it on (was the color brushed out)
    If the screen color is the same then it means that it's a hardware issue (repair is needed
    If screen if normal, then go to the Sony website and update the drivers and software.
    Unfortunately, we are unable to assist customers outside of the US. We kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/.
    Regards,
    Jen
    If my post answers your question, please mark it as "Accept as Solution"

  • Logic Pro audio error 10011 (drop out)

    I bought a new mac mini yesterday that meets all requirements for Logic. I bought it to run Logic as a dedicated machine linked to a keyboard. Apart from the basic software that came with it, Logic is the only software installed on it. Installed it after I did all the updates. Aiport & bluetooth is now turned off, and I don't have it hooked up to a network.
    Brand new, 10.6 factory fresh system, 2gbs ram and 91 GB of pure virgin hard drive space. Doesn't get much cleaner than that.
    And it wont run the demo songs without the audio error..... and these are their demos!!! I really doubt they would choose demo songs that are too complex to play, so why the errors?
    I tried running through the demos and re-running them. This did help, but one demo is still bawking half way through.
    This just does not make sense to me. Is there something I'm missing? I am new to Logic Pro, moving up from garageband. Not sure if this:
    'System Overload.The audio engine was not
    able to process all required data in time.
    (-10011)'
    is this what many here refer to as ' dropping out'?
    Help!!!!
    (ignore Model and machine listed below -different machine)

    Hi,
    Thanks for your replies. I did move demos to the Hard drive (found out that the hard way!)
    The thing is the mini is to be used exclusively for music, and is hooked up to a pro88 midi keyboard. 90% of the time it will be used for Mainstage, with some editing in Logic.
    It sure does a fine job with GarageBand - no issues there.
    My main machine is a MacPro, and I have three other (older) iMacs. So I really didn't want to spend more than I have to. As the Mac will be only used for music and nothing else (not even internet etc.) I was hoping that it would be up to the task of running Logic, as it does meet the needed specs.
    My worry is that moving up to a iMac (which would almost double my investment to $1300) might not necessarily do much. I am not willing to dedicate a big machine like a MacPro to the task -way too expensive for my budget.
    So.... being new to Logic, is there a chance settings are the culprit. Is current practice to work on a few tracks, and freeze them, then continue to add new tracks? Or is it more common to leave everything un-frozen when working on stuff?
    Options I am aware of are:
    •Freeze tracks
    •Buffer size set to 1028
    anything else?
    If the mini is not fully up to the task, would the low end iMac really be any better? or will it to be not up to the task either, in which case there is no point shelling out more. From what I have read, the even the biggest machines stumble from time to time.
    Thanks again for your input, I do value it!

  • Audio drop-out in FCPX with 1920x1080 & 2048x1240p @ 24p (codec Apple ProRes 4444 (Linear PCM))24p

    Hi all...
    I'm new to this forum.
    Is there an audio issue (drop-outs) with FCPX (ver 10.1.2) for 1920x1080 24p, 1080p HD & 2048x1240 24p (2k) - note: films in FCPX are in codec Apple ProRes 4444, Linear PCM?
    Very recently I've been working on a show reel and I have imported a file (short film) to snip out a section to add to the show reel. 
    I set the project to the film's settings i.e.. "set based on first video clip"...(1920x1080 24p, 1080p HD).  When I play the film in FCPX the audio "hic-cups"..."dips to silence"..."drops-out" briefly (up to 0.5 secs in duration) and very frequently all the way through (approx 15 mins long film)...note: audio set is at stereo 48kHz. The audio monitors on the right hand side also show the dip taking place (if it's a long enough drop-out).
    I also have a version of the film in 2048x1240 24p at 2k, again Stereo 48kHz...and this does the same audio "drop-out" all the way through.  I'm unsure what other formats will create this problem i.e. higher or lower aspect ratios than those above.
    Is this a software and/or OS issue?  Or a hardware issue?  Or both!?
    About This iMac details:
    iMac 27 inch: OS X ver 10.9.4
    Processor: 3.5 GHz Intel Core i7
    Memory: 32 GB 1600 MHz DDR3
    Graphics: NVIDIA GeForce GTX 780M 4096 MB
    Fusion Drive 3.12 TB
    Final Cut Pro X was bought & installed with this iMac back in Feb 2014
    FCPX version: 10.1.2
    Note also:  I used Compressor (ver 4.1.2) to convert the files (movies) above to Apple ProRes 422 HQ, Linear PCM and the issue disappeared - the audio and visuals played with no problems.  All films play with no issue when opened in QT player.  They are also fine when exporting from FCPX.  The issue only occurs (as far as I can tell) within FCPX when editing or playing the audio there.
    Has anyone encountered this problem?
    Kind Regards,
    Hakan

    Hi Luis,
    Thank you for that.
    Seems like you have a point about the "hardware" issue.  I'm unsure (new to it all) at what data rate my (er...wonderful) fusion drive provides FCPX for smooth playback - or where I can find that info on the iMac.  Playing back movies in the 422 HQ codec seems to have no issues (when I converted the movie from 4444 HQ). 
    But playing the full 4444 HQ, the picture is smooth, but the audio has these drop-outs - even with "best performance" option ticked. Interesting that the audio suffers, not the picture in FCPX - so not sure what's going on there. I also read - perhaps - that to play a smooth ProRes 4444 HQ movie in FCPX the data rate should be min of 500 Mbs (based upon About Apple ProRes) for HD movies and up (i.e. 2k).  ProRes 422 HQ needs a data rate of 220 Mbs - so that is my upper-limit to smooth video&audio playback with the current system I have, I guess.
    Does anyone recommend a fast USB3 or Thunderbolt drive (500Mbs+) where I am able to run 4444HQ movies with no issues to picture or sound (away from the fusion drive)?
    KR
    H.

  • Broadband Dropping Out and Connection Speed Decrea...

    Sorry to be a pain but I am back here again.
    Since the last issue with speed, connection drop out and noisey line which required an underground cable to be partly replaced, all has been fantastic and no problem to report. Many thanks to those who were involved in helping with getting that issue resolved.
    About 10 days ago the broadband started to drop out at random times but not too often. The broadband hub light would go out for about 15 seconds before returning. My connection would automatically resume and no great problem. It has since become more of a problem and pain.
    The frequency of drop out increased with a sort of pattern. Last week an example would be drop out at 11:50 am, again at 12:40 and once more at 1:30 pm. Each time the connection returned my computer icon for wifi would be a warning triangle. I clicked on the icon and would get a message 'limited connection'. The only way I could connect again would be to click the icon and select to disconnect and then connect, making sure a 'tick' was in the box for autoconnection. A bit more of a pain than before but usable. It got more of a problem over the next few days.
    The frequency of drop out increased. This became a right pain when trying to purchase things online as I could not be sure in the purchase had been completed or if I tried again would I get two lots? Upon broadband connection returning I would not be able to 'auto connect' but would get the warning triangle of 'limited connection'. I tried the click to disconnect and reconnect but it failed to work. I ended up shutting down the laptop, waiting before powering up. This failed to work as all I would get is the warning triangle and 'limited connection'. The only way I could reconnect was to press the 'restart' button. This worked but it got worse.
    The next day the broadband connection would drop out every couple of hours. It got to the point that even pressing the 'restart' button would not allow me to connect. I tried three times and gave up. I had to resort to pressing the very small 'reset' button on the back. This cured the problem for about 12 hours before the drop outs started again.
    It is now a case of 50/50 if I can connect to the broadband again after a drop out. It is getting quite frustrating. I only used the small 'reset' as a last resort. I have noticed that the speed of the connection has started to drop down also.
    Each time the hub drops broadband and I can auto connect and do not press any hub button, the timer has reset to zero days and zero hours. I know it takes about a week for the connection to settle. I do wonder if these drop outs are messing the connection settings for my line speed? The line used to be rated at 21 Mbps but has decreased to 17 Mbps, my actual connection used to be 19 Mbps but struggles to reach 14 Mbps. It is slowly dropping with each and every drop out.
    I also looked at the event log in the hub. Just before each broadband drop out I see a external connection is made with the initials 'CWMP' followed by 'event code 1 boot' or 'event code 6 connection request' or 'event code 4 value change'. Straight after the broadband connection drops out with out fail.
    All I can seem to find out is that the external connection is either the hub connecting to the server or vice versa? As for the codes? I have no idea at all.
    I only ever resort to pressing 'restart' if I cannot connect to my hub. I have only pressed the 'reset' as a last resort as nothing else worked to allow me to reconnect.
    Can anyone offer any help or best a permanent fix?

    I connected to the test socket and used a wired connection for the speed test and hub stats.
    The hub position and run of cables are the same as when the last engineer advised as the best set up.
    Since my last post I have checked the event log and 'CWMP' has made at least two remote connections but the hub did not drop broadband connection. The broadband has been stable but just slower than usual, as you stated due to the drop outs/disconnections.
    I guess a case of wait and monitor to see if the problem has resolved itself?
    Will the speed automatically return to the usual 18 to 19 Mbps? or will something else have to be done to reset it at the exchange/server?
    Here are the hub stats from this morning.
    Connection Information
    Line state:
    Connectedppp0_0
    Connection time:
    2 days, 00:23:43
    Downstream:
    16.69 Mbps
    Upstream:
    1.024 Mbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    9.5 dB / 7.1 dB
    Line attenuation (Down/Up):
    10.3 dB / 6.7 dB
    Output power (Down/Up):
    19.8 dBm / 12.4 dBm
    FEC Events (Down/Up):
    4947 / 0
    CRC Events (Down/Up):
    11 / 11
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    377 / 48
    Error Seconds (Local/Remote):
    72 / 21

  • External HDD keeps dropping out (without ejecting itself) ~ due to 1 bad partition

    Hi,
    As stated above, my faithful WD 1TB MyPassport HDD keeps dropping out by itself, ie. icon disappears from my desktop and I get left with a 'eject before disconnect...' message.
    At first it would appear to be a cable/USB/corrupt disk issue, BUT..........this is only happening since I tried to delete a partition using DiskUtility, (I have 2 partitions, I'll refer to the one I was trying to delete 'Partition1'), halfway through this  my Mac froze. I'm using a macbookpro[Alu][intel][OSX10.8.4] and an iMac[10.8.4 again].
    Symptoms....
    1. On reset I found that Partition1 showed up in gray in DiskUtility, but not on the desktop.
    2. Partition2 shows up fine, on desktop and in DiskUtility.
    3. After a minute or so both partitions dissappear and I get my familiar 'you should have ejected' message.
    All I want to do now is repair the permissions, verify the disk or delete Partition1...but because the drive keeps disappearing I'm a bit stuck. If I can just get the data from Partition2 before it all drops out then I can cope with binning the rest of the drive.
    I've tried....
    1. different equipment [cables, different macs (macbook and iMac), hubs and USB ports]
    2. using DiskArbitrator to allow the drive to stay connected
    3. using KeepDriveSpinning for the same reason
    4. smashing my head against a brick wall
    Please help....
    Thanks in advance,
    Grant
    Str0ke5

    It certainly may be. I do not trust Western digital external drives. I've have several of them fail and it was not the physical drive that failed it was the enclosure electronics. Once I removed the physical drive from the WD enclosure and connect it with a IDE/SATA to USB adapter the actual drives were fine and I'm still using all of them.
    It also might be your Mac as these WD Passport drives are USB powered and Mac's are notorious for not putting out enough power on the USB ports to complete power up some of these type drives. There are numerous thread on how a warning will come up thjat the USB port has been disabled because something it drawing to much power from it. And that is with nothing at all connected to any of the USB ports.
    Only way to test it to take the drive out of the WD enclosure and use one of those IDE/SATA to USB adapters and see if the same thing happens.

  • VHS imports drop-out

    I asked about this b4 but have found no resolution. Im importing VHS tapes into iMovie through a Pinicle DV box. The problem is, I cant walk away because every few minutes the tape stops being imported and I have to restart the process from the drop out point. I cleaned the VCR and it helped at first but now that doesnt even seem to solve anything. WHAT CAN I DO! I have a LOT of tapes to do and this is making it VERY tedious. Is it my box, computer, imovie, or vcr??? thanks for ANY help!

    Sometimes it is just the poor quality of the original VHS tapes, especially if the tape was recorded at extremely long play. I think the code was EP rather than SP or LP.
    I have recorded ALL my VHS tapes to miniDV so that I would not cause further degradation as I tried to import VHS footage. Probably around 100 hours of miniDV tapes. Most of the tapes were ok with occasional blips of dropped frames.
    However, one of my son's baseball games was recorded by someone who made copies of his original tape and gave all the team members copies. It is about 14 years old, and had become absolutely terrible with multiple video drop-outs. I copied the entire game to minDV, and then imported that into iMovie.
    I spent a lot of time editing out the bad video drop-outs. Most of them were ok to lose, but some had important audio in the midst of the blue screen. It was tedious editing, and my iMovie quickly bloated up to 100 GB of space. Yes, that is correct......100 GB. Fortunately, I was making the movie on an external drive and had enough space.
    I did the final version by sharing the iMovie as Full-Quality QuickTime movie and making a new iMovie with the quicktime one--which ended up being only 8GB!!!
    So, you will have to decide if it is worth it to edit those sections on a nearly frame-by-frame basis. Is it worth the time and effort and large size of the movie, or can creatively put some good video clips over the bad to preserve the good audio segments?

  • Bluetooth connection between iPad and Mac keeps dropping out. I want to see the email drafts of iPad on the Mac All software up to date

    Trying to connect iPad Air latest version to a Mac Mini running Yosemite .Connection is made by Bluetooth (hoping to access the Drafts folder of the iPad  to lift off attachments to Mac mini) BUT the connection drops out after 20" or so.

    Jailbroke?

  • Why has Lightroom dropped out of the CC app?

    Why has Lightroom dropped out of the list of installed applications entirely? And this on two independent systems, even.
    It was originally installed through CC and it is still working - but in the CC app it's now listed under "Install new apps".
    Here's a screenshot from a couple of weeks ago:
    And here's how it looks now:
    And why isn't Photoshop showing any updates, with ACR 8.4 released???

    CC desktop lists applications as "Up to Date" when they are not
    -http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html
    or
    Chat Now button near the bottom for Activation and Deactivation may help
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  • Finder "drops out" during operations, then "drops in" when in other programs.

    When trying to copy files to a USB stick or through AirDrop, Finder will drop out for a second (all its windows briefly disappear and processes will stop). The files will be partially copied to the USB stick, but greyed out.
    When in other programs, like Safari, Finder windows will suddenly appear, unbidden.
    When I run DiskUtility, I will get a very long list of permissions which need to be repaired. When I click "Repair Permissions" it says it repaired them, but then running Repair Permissions again brings up the same list. I have tried the "resetpassword" command in Terminal from the Recovery Volume (Restart+CMD-R) to reset the home folder permissions and ACLs. I have reset the PRAM. I have done a Safe Boot and restarted. I still cannot copy, and Finder is still acting weird. What can I do?
    J

    Might be Finder preferences are corrupted ...
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following:
    ~/Library/Preferences/com.apple.finder.plist
    Click Go then move the com.apple.finder.plist file to the Trash.
    Launch the Finder to test.
    If that didn't help, try relaunching the Finder > Relaunch Finder… from the Mac OS X Finder
    It's not necessary to repeatedly repair permissions. Those are messages, nothing more.

  • Audio keeps dropping out. Orignal file audio is ok.

    Audio keeps dropping out. Orignal file audio is ok.

    What version of Premiere Elements and on what computer operating
    system is it running? Version 13, PC with Windows 7
         What are the properties of your source media? Do not understand what
    you are looking for. But hare is some info
         Length 00:01:23 Size 311MB, Frame Width 1920, Frame Height 1080,
    Frame Rate 29 frames/sec, data rate 29977kbps, total bitrate 31616kbps
         And, if possible, please tell us the brand/model/settings of the
    camera or device that recorded the audio. Canon 70d, default settings
         Is the audio a separate audio file or a component in an video audio
    file? Component of video
          What is your project preset? default
          Also I was able to reload orginal file and there was no audio drop
    out. But I need to understand what can cause this issue. But when I
    load this file into Power Point 
         I am also having issues playing the saved file (for view on
    computer). The audio drops out after about 20 second, video continues
    to play. This did not happen with the orginal file that had the audio
    drop outs in premiere. What dropped out in Premiere also dropped out
    in Power Point. 
         If needed I can send you the file.
         Thank you for your quick response
         Ron

  • VHS tapes drop-out while importing

    Im importing VHS tapes to iMovie and without fail, every so many minutes they drop-out and the screen goes blue, though the tape hasnt stopped playing. Is there some way to stop this? Do I just need a new box? I have a Pinnacle Movie Box DV from a few years ago, and Id prefer not to spend a fortune!

    Sometimes it is just the poor quality of the original VHS tapes, especially if the tape was recorded at extremely long play. I think the code was EP rather than SP or LP.
    I have recorded ALL my VHS tapes to miniDV so that I would not cause further degradation as I tried to import VHS footage. Probably around 100 hours of miniDV tapes. Most of the tapes were ok with occasional blips of dropped frames.
    However, one of my son's baseball games was recorded by someone who made copies of his original tape and gave all the team members copies. It is about 14 years old, and had become absolutely terrible with multiple video drop-outs. I copied the entire game to minDV, and then imported that into iMovie.
    I spent a lot of time editing out the bad video drop-outs. Most of them were ok to lose, but some had important audio in the midst of the blue screen. It was tedious editing, and my iMovie quickly bloated up to 100 GB of space. Yes, that is correct......100 GB. Fortunately, I was making the movie on an external drive and had enough space.
    I did the final version by sharing the iMovie as Full-Quality QuickTime movie and making a new iMovie with the quicktime one--which ended up being only 8GB!!!
    So, you will have to decide if it is worth it to edit those sections on a nearly frame-by-frame basis. Is it worth the time and effort and large size of the movie, or can creatively put some good video clips over the bad to preserve the good audio segments?

  • Audio drop outs and continuing problems- Apple Support informed again.

    Hi All,
    Have had various audio problems with iMovie transfer to iDVD 6. iMovie had the problems initially but a weird trick seems to be helping me.
    Copy a random new audio track into my film, paste it, then cut it out then empty trash..... all of a sudden my audio is clean again and perfectly in time with the video. I have informed the iMovies people in Ireland and they are at a loss to explain why this is now ok.
    BACK to the plot and iDVD 6.
    When I try to export this project from iMovie in iDVD 6 it either becomes an audio garbled nightmare or if I try and import into iDVD 6 I get audio that gradually becomes out of sync with the video visual. I know that this project was recorded in 16 bit audio so no joy there.
    I've told Apple in Ireland that there are major audio issues with iDVD 6's audio set up + something they were apparently unaware of. I was assured that the tech dept's would investigate and solve. I am really surprised that they hadn't seen this problem in this forum!!
    In the meantime any advice is very gratefully received. I'm on an Intel G5 Imac with 1.83ghz 1Gb sdram and 250 GB HD. So Software is currently limited!! I desperately need to get this project to DVD!!!!
    Many thanks,
    GUY

    SAME EXACT THING HERE. This is what I posted in a diff thread:
    2013 iMac 1TB Flash Drive
    OS 10.8.5
    Constant audio drop outs using Apogee Duet. I have to unplug and replug several times to get the system to recognize it. Sometimes when it is connected, Audio Prefs doesn't even recognize it and it shows up as "Unknown". When I click Audio Prefs before I get in, I get the spinning beachball and it takes a while for it to open. I have been in touch with Apogee but to no avail. It seems to work on my 2013 Macbook Pro, but I haven't tested extensively. It seems to get tripped up if I'm working in Ableton and get a Facetime call or if I try to use Youtube / Soundcloud. The system gets noticebly slower. When I switch back to Ableton, Duet is recognized (sometimes not recognized at all) but I cannot play anything inside the project window.
    Not sure what to do at this point

  • Airport Express 802.11n keeps dropping out..

    I have the following setup
    Room 1
    1. router/ DSL modem 802.11b/g
    2. Airport express b/g "joined" to network created by router, connected to stereo.
    Room 2
    1. airport express n "joined" to network created by rounter in room 1, also connected to stereo
    2. Vista laptop b/g connecting to network created by router in room 1
    I have the following problems..
    1. When using airtunes in room 2 the music keeps cutting out, even though I am sat with my laptop next to the airport express.
    2. Airport utility keeps loosing sight of the airport express in room 2 and I cannot see its configuration..
    What can I do to improve the performance of the network in room 2, this is using a newer airport express however the older one in room 1 performs much better.
    Are the issues down to the fact that the AE in room 2 is in a different room to the router.. I cannot configure the network any other way such as WDS or extend network (only available on an N network)..
    so what are the options.. the airport express in room 2 is not really usable at the moment.. BTW room 1 and 2 are not exactly far from each other..
    Will

    I just read that if you run iTunes in Adminstrator mode for Vista, that the drop-outs disappear. Try right-click on iTunes icon and Run As administrator. Your user might have adminstrator user rights, but you should do this anyway. If this works, then you can change this in Properties -> Shortcut -> Run as Administrator. You will have to type in the administrator password, or click through on UDC, each time that you run iTunes.
    Also, make sure that the radio button on your AX is set for b/g compatible ... if you have set it to "Join an Existing Network", you might try setting it, for a moment, to "Create a Wireless Network". Check the b/g compatible option and then revert back to "Join an Existing Network." Re-enter your SSID, wireless name, and then save.

Maybe you are looking for