Colors not displaying in WEB GUI

Hi,
In WEB GUI, I am unable to see the colors in my ALV Grid when the fields are in editable mode where as in SAP GUI am able to. There is no problem when the fields are in non-editable mode.
Can you help me out to view the colors in my ALV Grid for the editable fields in WEB GUI?
Thanks,
Adithya M.

You might be out of luck, because usually there are no specific settings for the WEB GUI. And one of the problems with WEB GUI is that it doesn't support all the functionality which is offered in your standard GUI. So it is possible that this is exactly one of the scenarios WEB GUI doesn't support. That is also the reason why not all SAP transaction work in WEB GUI. We had issues with parts of TEM transactions not working via WEB GUI.
Michael

Similar Messages

JApplet Form NOT Displayed on Web Page

It is my JApplet code (that has been solved in this forum; refer to my previous Q) that is being successfully deployed, started, however, does not display the expected GUI (which is being displayed fine if is run as an Applet).
The error message displayed in "Java Console" is below.
java.lang.reflect.InvocationTargetException
    at java.awt.EventQueue.invokeAndWait(Unknown Source)
    at xmlAnalyticsPackage.XMLAnalysisToolBuilder.init(XMLAnalysisToolBuilder.java:36)
    at sun.applet.AppletPanel.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
Caused by: java.lang.NoClassDefFoundError: Could not initialize class sun.awt.shell.Win32ShellFolder2$ComTaskExecutor
    at sun.awt.shell.Win32ShellFolder2$ComTask.execute(Unknown Source)
    at sun.awt.shell.Win32ShellFolder2.getFileSystemPath(Unknown Source)
    at sun.awt.shell.Win32ShellFolder2.composePathForCsidl(Unknown Source)
    at sun.awt.shell.Win32ShellFolder2.<init>(Unknown Source)
    at sun.awt.shell.Win32ShellFolderManager2.getDesktop(Unknown Source)
    at sun.awt.shell.Win32ShellFolderManager2.get(Unknown Source)
    at sun.awt.shell.ShellFolder.get(Unknown Source)
    at javax.swing.filechooser.FileSystemView.getRoots(Unknown Source)
    at javax.swing.plaf.metal.MetalFileChooserUI.updateUseShellFolder(Unknown Source)
    at javax.swing.plaf.metal.MetalFileChooserUI.installComponents(Unknown Source)
    at javax.swing.plaf.basic.BasicFileChooserUI.installUI(Unknown Source)
    at javax.swing.plaf.metal.MetalFileChooserUI.installUI(Unknown Source)
    at javax.swing.JComponent.setUI(Unknown Source)
    at javax.swing.JFileChooser.updateUI(Unknown Source)
    at javax.swing.JFileChooser.setup(Unknown Source)
    at javax.swing.JFileChooser.<init>(Unknown Source)
    at javax.swing.JFileChooser.<init>(Unknown Source)
    at xmlAnalyticsPackage.XMLAnalysisToolBuilder.initComponents(XMLAnalysisToolBuilder.java:63)
    at xmlAnalyticsPackage.XMLAnalysisToolBuilder.access$000(XMLAnalysisToolBuilder.java:30)
    at xmlAnalyticsPackage.XMLAnalysisToolBuilder$1.run(XMLAnalysisToolBuilder.java:38)
    at java.awt.event.InvocationEvent.dispatch(Unknown Source)
    at java.awt.EventQueue.dispatchEvent(Unknown Source)
    at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
    at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.run(Unknown Source)
java.lang.reflect.InvocationTargetException
    at java.awt.EventQueue.invokeAndWait(Unknown Source)
    at xmlAnalyticsPackage.XMLAnalysisToolBuilder.init(XMLAnalysisToolBuilder.java:36)
    at sun.applet.AppletPanel.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
Caused by: java.lang.NoClassDefFoundError: Could not initialize class sun.awt.shell.Win32ShellFolder2$ComTaskExecutor
    at sun.awt.shell.Win32ShellFolder2$ComTask.execute(Unknown Source)
    at sun.awt.shell.Win32ShellFolder2.getFileSystemPath(Unknown Source)
    at sun.awt.shell.Win32ShellFolder2.composePathForCsidl(Unknown Source)
    at sun.awt.shell.Win32ShellFolder2.<init>(Unknown Source)
    at sun.awt.shell.Win32ShellFolderManager2.getDesktop(Unknown Source)
    at sun.awt.shell.Win32ShellFolderManager2.get(Unknown Source)
    at sun.awt.shell.ShellFolder.get(Unknown Source)
    at javax.swing.filechooser.FileSystemView.getRoots(Unknown Source)
    at javax.swing.plaf.metal.MetalFileChooserUI.updateUseShellFolder(Unknown Source)
    at javax.swing.plaf.metal.MetalFileChooserUI.installComponents(Unknown Source)
    at javax.swing.plaf.basic.BasicFileChooserUI.installUI(Unknown Source)
    at javax.swing.plaf.metal.MetalFileChooserUI.installUI(Unknown Source)
    at javax.swing.JComponent.setUI(Unknown Source)
    at javax.swing.JFileChooser.updateUI(Unknown Source)
    at javax.swing.JFileChooser.setup(Unknown Source)
    at javax.swing.JFileChooser.<init>(Unknown Source)
    at javax.swing.JFileChooser.<init>(Unknown Source)
    at xmlAnalyticsPackage.XMLAnalysisToolBuilder.initComponents(XMLAnalysisToolBuilder.java:63)
    at xmlAnalyticsPackage.XMLAnalysisToolBuilder.access$000(XMLAnalysisToolBuilder.java:30)
    at xmlAnalyticsPackage.XMLAnalysisToolBuilder$1.run(XMLAnalysisToolBuilder.java:38)
    at java.awt.event.InvocationEvent.dispatch(Unknown Source)
    at java.awt.EventQueue.dispatchEvent(Unknown Source)
    at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
    at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.run(Unknown Source)Please help on this.
Nilanjan

May be this bug has to do with you:
[http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6544857]

Safari not displaying some web pages properly why?

I have been finding of late that safari does not display certain web pages properly. i.e.: text overlaps other text and is not formatted properly. This seems to have become more common lately. Even Apple's own apple info page does not display properly. Could this be a setting in safari that I have messed up somehow?

Go step by step and test.
1. Delete Cookies
    Safari > Preferences > Privacy > Cookies and other website data:
    Click the “Details” button.
    Remove all cookies except from Apple, your internet service provider and banks.
2. Safari > Preferences > Extensions
    Turn off Extensions if any and launch Safari again to test.
    Turn on those one by one and test.
3. Delete Caches.db
    Close all windows and quit all applications.
    Hold "option" key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the dropdown.
    Library > Caches > com.apple.Safari > Caches.db
    Right click the Caches.db file and select "Move To Trash.
    Close windows and relaunch Safari.
4. Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
5. Temporarily turn off Safari iCloud sync and test.
     System Preferences > iCloud
     Uncheck the box beside “Safari” and test.

HT5364 Safari is not displaying the web page content & Crashes on clicking Security Tab in Preferences!

I have Mac 10.8.4 with Safari 6.0.5.
Safari is not displaying the web content but images on the web page are being displayed.
Although the webpage is loaded, but nothing is shown else than Images. When I hover the mouse on the blank webpage shown, the cursor changes on the links on the web page.
I tried resetting the preferences from the menu as well as deleting the Preferences of Safari from ~/Library/Preferences/ but nothing helped.
When I open Preferences of Safari & click on Security tab, It Crashes!!
Thanks,
Shubhi

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Radio Buttons / Check box of Gui Transaction not displaying in WEB UI

HI,
We are using CRM 7.0 / ECC 6.0, i am launching some ECC transaction in WEB UI using transaction launcher, Radio button and Checkbox are displaying properly in Dev CRM system but it is not displaying in Quality system.
I compared both systems, everything is the same. I also checked the ITS URL, we are using transaction IC_LTXE.
/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXE&okcode=ICEXECUTE&sap-client=100
Please Advise ?.
Thanks & Regards,
Rajanidhi Rajasekeran.

Hi,
We are working on an upgrade project and have used transaction launcher to give SAP GUI transactions in Web UI.
We are facing a similar issue.
We have a report program with several checkboxes. User will select few checkbox and perform further processing.
In development system it is working fine but in quality system if we scroll down or up after clicking on checkbox the page is getting refreshed and check is cleared.
Did you come up with a reasonable solution to this issue?
Do you know any way around this issue?
Thanks in advance
Regards,
Sayan

Error raised using 'CRM_MESSAGE_COLLECT' not displayed in Web UI

Hello,
I have implemented the badi CRM_ORDERADM_H_BADI and based on certain conditions i raise an exception and display the error message using function module 'CRM_MESSAGE_COLLECT'. The application log is populated with the error message and I am able to see the error message in SAP GUI . However when the same transaction is triggered via WebUI , even thought the exception is raised , the error message is not displayed.
I know i can use the method ADD_MESSAGE of the class CL_CRM_GENIL_GLOBAL_MESS_CONT if i want the error message to be displayed in Web UI .
However I want the message to be displayed either if the transaction is run from the SAP GUI or web UI .
Have anyone come across the similar situation , is there something I am missing.
Thanks & Regards ,
Sriram.

Hello Arun ,
I got the solution . The error message was raised properly . The problem is message filter at every view or viewset of a component is actually switched off by default.With standard components the filter gets activated at runtime if the component controller contains a BOL entity.
In our case , since it was a custom component with no BOL entity the filter was switched off and hence the messages from the application level were not read.
Therefore we redefined the filter method IF_BSP_WD_STATE_CONTEXT~GET_MESSAGE_FILTER at the view/viewset level and turned on the filter by default.hence even if the component does not return an entity the message filter gets activated.
Thanks for your inputs.
Thanks & Regards,
Sriram

List of values is not displayed in web inteligence report

I created a web inteligence report and put into my favourite folder. The report consist of a selectable list of values in a prompt but it does not appear in my favourites folder.
The users with administrator rights that copied this report into their own favourites folder are able to see the list of values in the prompt.
It seemed that the list of values does not display in the prompt when non administrator rights opened this report in their own favourites folder.
Anyone can figure out how to set the access rights so that non administrator can see the list of values when the web inteligence report is opened in their own folder.
I am using Business Objects XI 3.1 ..

SOLVED
     CMC -> Connections
-     Right click connection name, Click u201CTools > Check Relationshipu201D
-     In u201CQuery Resultsu201D, Right click Connections, Click u201CUser Securityu201D
-     Assign Security for u201CEveryoneu201D
-     UNTICK both Inherit from Parent Folder and Inherit from Parent Group
-     Assign u201CView on Demandu201D
     CMC -> Universes
-     Right click u201CUniversesu201D folder, click u201CPropertiesu201D
-     Under u201CUser Securityu201D, click Everyone and assign security
-     UNTICK both Inherit from Parent Folder and Inherit from Parent Group
-     Assign u201CView on Demandu201D

TH_DELETE_MODE not working in Web GUI after EHP7 upgrade

Hi
After upgrading to EHP7 the function module TH_DELETE_MODE is not working in the Web GUI. If I start the TH_DELETE_MODE in SE37 with the default paramter "1-" I'll get the HTTP error code 500. We use the function module for our webdynpro to logout but it is not working anymore.
Any idea or recommendation?
Thank you and best regards, Ronny

Your server-side include has all of the HTML on it for a full
page.
Strip everything from it except the stuff you want to
include.
http://www.fordwebs.com/mx-asp/ssi-index.asp
Ken Ford
Adobe Community Expert
Fordwebs, LLC
http://www.fordwebs.com
"ValsGalore" <[email protected]> wrote in
message news:f019c0$in1$[email protected]..
>I just recently began work on an existing Web site, which
includes the file
> nav.asp on every page. After I made some changes to one
of the pages (it's
> temporarily located at
http://www.enviroglasproducts.com/reps5.asp),
I found
> that when I closed it and reopened it in Dreamweaver, I
could no longer see the
> page in preview mode.
>
> It shows my </head> tag highlighted in yellow, but
won't let me click on it.
> In code view, the <table> tag, which is the first
tag after <body>, is "marked
> as invalid because it's an overlapping or unclosed tag."
I've been over this
> document several times, but I cannot find any errors in
the construction of the
> table.
>
> If I copy all the content into an identical page, it
will look fine in
> Dreamweaver until I close it and reopen it, and then I
will have the same
> problem.
>
> Oddly, when I remove the  from the second cell
> of the main table, then everything looks fine.
>
> Other points worth mentioning are that (until I delete
it), nav.asp shows up
> in its proper location in reps5.asp, but nothing else
does except for the image
> that appears right above it.
>
> In other pages on the site, the included nav.asp does
not show up in
> Dreamweaver at all.
>
> Can anyone think of why this is happening?
>
> Thanks!
>

Discussion Board item not displaying in web part page

Hi, I am using SharePoint 2013 on-premise. I created new Discussion Board name as "Discuss" and displayed in
Management View as shown below.
The list item showing properly without any issues.
But when i am adding this web-part into web part page with Management
view. The items are not displaying.
What is the issue.? How to display the items here.?
Thanks in advance.

Hi Ismaiel,
The Discussion Board is in same site.
If displaying the web-part page with Subject view the items are visible.
But when i am changing the view to Management the items are hidden.

I'm at work and my Mac book pro is saying its connected but will not display a web page. Others who have the MacBook is connected. Tried to restart. Please help

I'm at work and my MacBook Pro is connected wifi but a web page will not display. Other have the pros and is connect. Tried restarting but not working

You're not a liar. They should not charge you $90, it is within the 1-year warranty that comes with it and you are entitled to a free replacement. I have never had the problem myself on a 15 month old MacBook, so there must be SOMETHING that happened to it, maybe without you noticing. But might I recommend a wireless trackpad or Apple "Magic Mouse?"

Variable Screen not display in Web

Hi all
When i execute the Query ZBP02_Q001 in Web, the Variable Input Screen of the Query is not display first,but display the content of the ZBP02_Q001 directly in the Web. All of the Varibale is not mandatory;
i am using BI 7.0;
Anyone can give a help!
Thanks in advance.

Hi Cao,
May be your infoobject are holding constants, which led to direct execution without the selection screen.
Inorder to get the selection screen, select the infoobject and make its settings as optional and it will be displayed in your selection screen.
So whenever you use optional for an infoobject, that specific infoobject alone will appear on the selection screen.
Regards
Thenmuga Selvan

Color not displaying correctly

ive recently noticed that my colors arent displaying correctly ive already deleted the Illustrator settings folder to reset all preferences to default but the color problem is still happening i have my color ooptions this way
im using adobe illustrator cs5
Color to CMYK
Color Guide: Show Tins/Shades
this is what i mean im trying to get the color i see in the color picker

The Color Picker is unreliable for choosing colors based on what you see because it is not color managed while Color panel and Swatches are.
In your image, the color that you see in the Color Picker is how your monitor displays R=0 G=255 B=0. The color that you see in the Color Panel represents the same values in the file but the color management sends different values to the video card and thus to the monitor to display a color with appearance in the color space selected for the document. In your image this is a CMYK color space which you can check from the Show popup menu at the bottom left of the document window. To check the different values the video card is using, make a screen capture, save the image, open it in Illustrator and measure the color with the eyedropper. The color translation from the values in the file to the video card allows simulation of color spaces other than your monitor's. This simulation is accurate if you have a monitor profile installed in your system that correctly describes how your monitor displays colors. Such profile is created by using a color measuring device and profiling software. If your monitor profile (color space) installed in the system is the same as the color space of the document then there will be no translation (simulation) which in effects shuts down the color management - then the colors in the Color Picker will be the same as in the document. Many people do not bother to get an accurate profile of their monitor and use a generic sRGB profile for that. In such case working in RGB color mode using the sRGB color space (default in the Color Settings) will give the same colors in the Color Picker and the document. This usually is a sign of using a monitor that incorrectly displays colors.

Bex variable ready for input not displayed in webi

Hi,
I created bex query with some variables.
Variables are defined as "optional" but "ready for input". On productive system the prompts are all displayed, but when i transported the webi report to dev, some prompts are not displayed.
we are on BW 7.31 and BO 4.0. I also tried with BO 4.1. but the problem is the same.
I have no idea what's wrong here! Attached you can find some screenshots on my current settings.
thanks,
Katharina

Hi,
yes the reports are based on BICS and I moved them from prod to dev.
I already checked, the query panel does not show these variables!
I copied query and saved under new name, and i also created a new webi report upon this query, but some variables ready for input are still not displayed.
Regards,
Katharina

WAD: Push button not displaying some Web Items

Hi All,
I have a web template 7.x in which there is a push button for "Export to PDF". There are some changes carried out to this web template, to include one radio button web item. My requirement is to display this Web Item on the export to PDF page.
I have included this radio button web item in "Export to PDF" button list. However still it is not displayed on Export to PDF page.
Is there any other setting which i am missing?
Appreciate your quick response.
Thanks.

Hi Samruddhi,
As per SAP Note 1069368 which talks about the limitations of Export to PDF functionality in WAD 7, the following webitems alone are supported on Export to PDF:-
Supported Web items
Analysis item
Report item (see also the section 'Web application export with report items')
Chart item
Map item
Information item
Text item
List of conditions
List of exceptions
Images (only from the MIME repository, see Note 484390)
Thus Radio Button cannot be included in the exported PDF.
--Priya

Fileter value not displaying in web

Hi all,
I have a issue with selecting the filter value for a unit.
The problem is I can find the value when I run the query in BEx, but same value is not displaying in webreport.
Can anyone tell me, what might be the problem.
(Actually I have to filter on a perticular unit value. In the masterdata I have 30 values.when I exicute the report in BEx I can find all 30 values.But when the same report in web I can see only 29 values)

Hello Madhu,
whats happening there is java script code in ur webtemplate is desined to pull only those value go to ur webtemplate and click on the html look at he code there and do changes required to get the value you want.Hope this helps.
Thanks & Regards
Jai

Colors not displaying in WEB GUI

Similar Messages

Maybe you are looking for