Colors not printing correctly - Only When Printing from Reader 9

I have recently been having problems printing color PDF's using Reader 9. Yellows are printing as blue, blues as pink, pink as grey, etc. I have no problems printing any other types of photos, documents, or powerpoint presentations so I am assuming it is some setting in Reader. My printer is an HP Color LaserJet CM1015. Any help diagnosing this problem would be greatly appreciated!
Thanks in advance,
Dave

It is using sRGB and that is the only color profile available.
In addition, when I try to print 4 slides per page and 1 slide per page, the colors are completely different than when I try to print 2 slides per page.
I have tried changing settings in print options and put them back to default and nothing I do changes the issue. Again, it only occurs when printing from Reader. Everything else prints colors perfectly fine.

Similar Messages

  • Fonts not showing correctly only when on my account page on app store

    fonts not showing correctly only when on my account page on app store

    Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
    Secondly, try all the other ports on your computer, even a number of times.
    Thirdly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
    Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
    And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
    http://www.apple.com/support/ipad/assistant/itunes/

  • Canon MG6220 wierd zooming/cropping printing problem, only when printing with Windows XP?

    The printer in question is a Canon Pixma MG6220, connected to a WindowsXP printer.  I've printed this same document on a Brother laser printer, that is connected to the same computer, and it prints correctly.  I've printed this same document on a Epson inkjet printer, and it prints correctly.  I've printed this same document at Staples, on one of their big laser printers, and it prints correctly.  So, this printing problem is only occurring with this Canon printer. One other thing that may help you with this, is that last night I moved this Canon printer to another computer, except this one had Windows 7 on it, and it printed flawlessly!  So, it seems that it may have something to do with Windows XP printer driver. 
    I'm printing a one page document from Word 2002 which consists of about 10 pictures, no text.  All the pictures on the page are the same height but a different width.  When I print the document, some of the pictures print correctly and some of them do not.
    Essentially, what is happening is that some pictures are zoomed in about 50%, yet still print in the same area that is set in the document.  So, the image looks like it has been rudely cropped.
    The oddest thing is that this only happens to some of the pictures.  There is nothing special about these pictures.  The pictures that print correctly are from the same source as the ones that don't print correctly. I’ve done other Word documents like this, with the same format but different pictures, and they printed wrong too, some pictures correct and some zoomed/cropped.
    Here is a summary of the pictures from the files I attached,  and which ones  printed correctly, and which did not:  The first one is a screen capture of the Word document, and the other is a scan of the printed document.
    Row 1
        Pic 1 – error (zoomed/cropped), Pic 2 – error, Pic 3 – correct, Pic 4 – error
    Row 2
        Pic 1 – correct, Pic 2 – correct, Pic 3 – correct
    Row 3
        Pic 1 – error, Pic 2 – error, Pic 3 – correct, Pic 4 – error
    Row 4
        Pic 1 – error, Pic 2 – error, Pic 3 – correct
    One observation of the incorrectly printed pictures, is that the upper left corners appear unaffected.  It is the lower right corners that get the weird zooming/cropping effect.

    Urgently restore a backup of the registry.
    Urgently do not use the word 'urgently' in a forum of volunteers.
    Also it can not be urgent, as Forms 4.5 dates from the Flintstone age, and probably isn't even certified on XP.
    However, the error message is very clear: Apparently Forms 4.5 uses the registry to store printer info: you need to get that entry back. That kind of info is usually documented. Documentation is likely still online.
    Sybrand Bakker
    Senior Oracle DBA

  • Firefox will not print correctly. When printing from Firefox it looks like it thinks the paper size is a 3 x 5.

    I tried re-installing Firefox 23.0.1. It printed fine for about 4 times and then it went back to the same problem.
    In order to get everything to print out I need to scale to "shrink to fit" but then it is so small I can't read it.
    I switched to Internet Explorer and everything prints fine.
    I have a Brother MFC9325CW printer. I have a PC with Windows XP

    Have you tried all explained in the [[Fix printing problems in Firefox]] or reset printer margins.
    #In order to check the margins, we need to go to ''File'' > ''Page Setup''.
    #Once this is done, switch to the ''Margins & Header/Footer'' tab.
    #Check what's set there under ''Margins''.
    The following are the default values for ''Margins'':
    '''Right''': 12.7
    '''Top''': 12.7
    '''Left''': 12.7
    '''Bottom''': 12.7
    Check these values accordingly and change them if necessary.

  • SES not pulling correct price when adopting from Contract

    When doing a service entry sheet against a Limit Purchase Order and
    adopting a service master from a contract the price that is being
    pulled into the SES appears to be from the last purchase document
    instead of the specific contract line item that is being adopted. When
    we adopt a service master line item from a contract for say $4.00 we
    are expecting $4.00 to be populated on the SES. Instead we are seeing
    a price of $3.00 which happens to be the price of the last purchase
    order where this service master was referenced. How can we get the
    system to pull in the service master from the contract with the
    contract pricing?
    Steps for Reconstruction    
    1. Select Contract from which to Adopt Service Master - the user is
    doing a service selection and choosing to adopt the pricing from
    Contract 5600000119, line item 2.
    2. Select Services to Adopt to SES - the user identifies which
    Service Masters they wish to adopt on the SES. Note the cost is $4.00
    for each of the first two service masters and $6.00 for the last one.
    3. Adopted Service Masters come in with incorrect pricing - once
    these Service Masters are adopted from the Contract to the SES they
    come in with incorrect pricing. $1.75, $3.00 and $1.75 instead of
    $4.00, $4.00 and $6.00.

    Hi,
    Can you confirm the following :
    1. What is the price maintained when creating teh service contract.
    2. was the service selection when creating services in limit PO done referencing the contract?

  • Office jet pro 8600 how to default to black ink only when printing from my ipad

    Is there a way to set an option to print black ink only when printing from my Ipad 2?
    When I use the print icon the only option that shows is double page. I would like to be able to print black only.
    I can set that option when printing from my pc....
    This question was solved.
    View Solution.

    Hi,
    Airprint does not support Black ink only printing, however the HP ePrint app allow it.
    Be aware that the option is only available for documents (e.g Office files, PDFs, Web pages and emails) but not for Photo files.
    You may find the steps to get and use the app in the document below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01616126&cc=us&dlc=en&lc=en&product=4323659&tmp...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Color covering the whole pager when printing

    My color laserjet 4600dn, the Magenta color cover the whole paper when printing, and some yellow color spots on the paper too. Is something wrong with the transfer belt? Please help!

    Also, the best way to do this is not to adjust the black and white levels but to adjust the opacity of the image. You will need to make the background layer into a regular layer (double click it in the layers palette and say yes to the dialogs), then use the opacity slider to lighten it.
    Or alternatively you could add multiply layers till you reach the required lightness, then flatten the image.

  • Setting up footer to display only when printing

    Hello,
    I am trying to figure out if you can display a footer only
    when printing and not to be displayed when viewing the help
    information.
    Let me know if this is possible and if so how to do it.
    Thanks!

    Sorry we didn't get to you as quickly as you'd like, but we
    all have regular jobs...
    The content in footers can be conditionalized the same as
    regular context. RH provides the default Online and Print condition
    tags, but you can add others as you like.
    In addition, you can use templates to apply headers and
    footers to multiple topics more easily.
    See the "Conditional text" section of the RH Help.
    Good luck,
    Leon

  • PSE 11 - MacOX 10.7.5  -MORE-Printer and Profiles Not Working Correctly for first print

    As suggested by adobe support contacted Epson.   What I expected no help.  Since it works ok with PSE10, PSE 9, CS5 it could not be their problem. 
    However PSE 11 have changed something in the sequence of events.
    I then downloaded a trial version of Lightroom 4.   no problem everything works.
    I have been offered a refund for PSE11.     That is not encourageing.  Does that mean wait for PSE12?????
    I developed a bypass - every time I start up PSE11  I just print a dummy image thumb nail size.   then go on to regular printing and all works.
    original discussion
    Macosx 10.7.5
    When I start up PSE11  and go to print I set up the paper size then select a Printer Profile.  When print the image it is a mess and seem to be black and white it is as if I printed on the wrong side of the paper.
    I then go and try to print it again.   Now it all works as it should beutiful colours and spot on.  all other print following this works.
    Then I shut down PSE11.   Start it up again.  Guess what  first print is a mess again.   all others after are fine.
    I uninstalled PSE11, deleted prefs.  and reinstalled PSE11.    Same thing..   first print a mess all others ok.
    the issue can be replicated consistantly......
    no problems with PSE10 or PSE9
    any suggestions?????
    cheers elo

      It does seem like strange behavior but thanks for sharing the work around.

  • HT204053 Every time I try to access my emails on microsoft outlook I get a message from windows that mobileme services have stopped working. windows then tries to find a solution and says mobileme is not installed correctly. When I try to repair or uninst

    Every time I try to access my emails on microsoft outlook I get a message from windows that mobileme services have stopped working. windows then tries to find a solution and says mobileme is not installed correctly. When I try to repair or uninstall via the control panel my pc cannot find the route????? I do have an iphone and ipad. What can I do?

    The CrashIDs are what is needed. Do not attempt to attach or paste the reports.
    #Run Firefox in safe mode does that prevent crashes ?<br/>[[Troubleshoot Firefox issues using Safe Mode]]
    #Disable all plugins
    #Repeat and this time try in Windows safe mode. use the F8 key <br /> http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
    So you are saying it works ok as long as you avoid certain pages such as this Forum. That makes me wonder if it could be malware that is blocking access to assistance.Run malwarescans with multipe and up-to-date tools.
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • I have manipulated a photo using layers etc and then flattened it and saved it under a new name.  When I use 'Preview' (mac) to view the finished photo it doesn't look right.  It's as the layers have not flattened correctly.  When viewed in Elements 12 it

    I have manipulated a photo using layers etc and then flattened it and saved it under a new name.  When I use 'Preview' (mac) to view the finished photo it doesn't look right.  It's as the layers have not flattened correctly.  When viewed in Elements 12 it looks OK.  The photo looks incorrect in other software such as photo books.
    Looking at the same photo before flattening, what is being shown is only the top layer.
    How do I correct this?

    STEVEN1A wrote:
    I have manipulated a photo using layers etc and then flattened it and saved it under a new name.  When I use 'Preview' (mac) to view the finished photo it doesn't look right.  It's as the layers have not flattened correctly.  When viewed in Elements 12 it looks OK.  The photo looks incorrect in other software such as photo books.
    Looking at the same photo before flattening, what is being shown is only the top layer.
    How do I correct this?
    The top layer is indeed the one that is visible, unless there is/are area(s) of translucency on that layer, so that you can visualize a portion of the subjacent layer.
      the finished photo it doesn't look right.  It's as the layers have not flattened correctly. 
    Are your settings targeted to have the printer manage colors, or, to have PSE manage colors?

  • Spot colors not showing correctly in acrobat 11

    Spot colors not showing correctly in the output preview as well as the page correctly. I have a spot pms
    295 on a page in a few different areas of text and backgrounds. The spot color shows on 1 of my backgrounds
    and text and a spot color on another background does not. These items are on the same page. Although I
    can use the eyedropper to check the color of these items and it states the spot color is present. The page
    also prints correctly. Previews not happening.

    I included 3 screen shots from Acobat 11 of the test requested. Also, included the last screen shot from Acobat 9 of same file.
    Which shows correct preview. To eliminate possible ICC profile issue. I did change profiles to all that were in the profile list
    with no change in either test.

  • Photos not opening in PS when opened from Bridge. [was:Question]

    Photo's not opening in PS when opened from bridge, this has been happening for the last few weeks. I will be working in PS and opening from bridge OK,  then suddenly I will open about 6 photo's but they only show the tabs at the top of the screen but no photos. I have to close PS and reopen before they show. Can anyone help it is driving me crazy. Tks

    The odds are you chose the logical file rather than the correct file as your external editor:
    http://barbarabrundage.com/2011/10/05/adobe-hide-and-seek-setting-pse-10-as-external-edito r/

  • App will not download to iPad when purchased from App Store - stuck with Cloud icon

    Device : iPad Air 32gb wi-fi model (not cellular data)
    OS version : 7.1.1 (up to date)
    Location : UK
    Problem : App will not download to iPad when purchased from App Store - stuck with Cloud icon
    Last night I tried to download an app over wi-fi onto my iPad Air, but the app did not install.
    I have plenty of space (the app is 24.1mb, I have 3.4gb free space) and there are no restrictions whatsoever on my iPad - no blocks on App store purchases, no age-related restrictions, no country restrictions etc.
    Normally from the App Store page you would tap the price (in this case the app was free), enter your iTunes password, and the app would download.
    Also a new icon appears on the home screen and a circle shows the progress of the download.
    However this did not happen.
    Instead I have the Cloud icon (the one that shows when you have bought an app but it is not currently installed on your device) and a message that says "You've already purchased this, so it will be downloaded now at no additional cost".
    If I press OK I am then prompted to enter my iTunes password, the Cloud symbol briefly changes to a circle (and I mean for a split-second, like the blink of an eye) and then the Cloud symbol appears again.
    The app does not download - in fact it does not even *attempt* to download.
    I have tried this >20 times now and it always occurs excatly like this.
    After Googling this problem (which seems common) and reading over a dozen threads on this forum plus Apple's own official support pages, this is what I've tried:
    I can re-download other apps that I have previously purchased on this iPad, with no problems.
    I purchased another app on my iPhone 5 and was then able to download onto my iPad with no problems.
    I have reset my iPad >5 times - both by pressing/holding the home/power buttons, and also a full switch off and restart.
    I have logged out of my iTunes account on the iPad, and logged back in.
    The wi-fi is Virgin Media fibre optic broadband with a verified speed of 20 meg (confirmed by Speedtest) plus an 802.11-n Belkin router and my iPad will happily load web pages, stream videos on YouTube, download other apps etc.
    I have reset/rebooted my internet connection
    In an attempt to eliminate by broadband connection from the possible causes, I have switched off my router, linked my iPad to the hotspot feature on my iPhone and tried to download the app over cellular data, but still cannot download the app.
    I have tried on 2 other wi-fi networks but still cannot download this one app.
    My iTunes account has a cerdit balance from an iTunes card, but the app was free anyway
    Nothing I try will download the app in question.
    The app is iPad only, so I cannot install on my iPhone to try and kick-start the process.
    I guess I could install the app on my computer and then sync the iPad, but that's *working around* the problem - it's not *fixing* the problem.
    (Since getting the iPad I use almost never use my computer. And anyway what if I did not have a computer? Didn't iOS go "PC-free" with version 5?)
    I would like to call Apple but my 90-day telephone support has expired (the iPad is around 6 months old) and I don't want to buy Apple Care for this one problem.
    I can't make it to an Apple Store to speak to a Genius.
    Bearing in mind the list of things I've already tried, what do I do next?
    Thanks in advance for any support.

    Hi there.
    Thank you very much for your quick reply, it's really appreciated.
    No need to apologize, I actually found the phrase "If your iPad ever craps the bed" amusing under the circumstances
    I checked the list of installed apps like you suggested (Settings>General>Usage>Storage>Show all apps) but this problem app is not in the list. I have also swiped down on the home screen to search for it, but again it does not show.
    While it has not let me download the app (and I just tried it again) it has helped me to eliminate a few things from the list of what to try, and I can definitely conclude that it has not downloaded.
    I guess I need to fire up my PC and download it / sync my iPad.
    Thanks again for your help

  • Hello, I have bought an iphone two weeks ago. Now I have a big problem. Whenever I receive a phone call, the caller could not heare me only when I switch to the handsfree speakers phone. The same issue accurs, when I call somebody.

    I have an iphone and whenever I receive a phone call, the caller could not hear me only when I switch to the hansfree speakers phone. the same issue occurs whenever I call somebody. Could anybody help me?

    Hi
    You should ask your relative to physically take the iPhone to the store rather than shipping it because as diesel vdub has said:
    "No Apple store will accept an iPhone shipped to them"
    All you have to do is safely pack and ship your iPhone from the Philppines to your California-based relative.
    HTH?
    Tony

Maybe you are looking for