Colors not rendered correctly in Photos

The Photos app is not rendering colors correctly.  I just downloaded the Loom photo organizer app, which accesses photos from my iPhone Camera Roll.  As I was using Loom to scroll through photos on my iPhone Camera Roll I noticed that one particular nature photo displayed vividly, the way I remembered it when the photo was taken a few days ago.  The image was of a large grove of golden aspen on a mountainside in Wyoming.  I had viewed the same photo using the Photos app and thought the yellows looked muted but assumed that the colors had been affected by the glass car window, through which the original image was taken.  Curious, I compared architectural photos I took in Denver earlier today and noticed the same thing.  Colors were presented correctly by Loom, but yellows were not expressed correctly in the Photos app.  Neither of these photos had been edited in any way and both were taken in natural light.  The architectural shot was not taken through glass.
I looked for a color correction or color balance setting on the iPhone, but did not find one.  My iPhone dsplay hardware seems fine, again, becuase Loom presented the colors correctly.
I am curious if anybody else has noticed this and also wonder how I might notify Apple. 

Now I understand the problem described in my post, above.  I don't know how it happened, but a "Fade" filter was being applied to all of my recent photos in the Photos app.  When I selected "None" in the filter menu, the yellows were expressed properly.  Again, I don't know how this happened.  Older photos did not have the Fade filter applied.  I'll have to pay attention to this in the future.
But, if you want to reduce the yellow in your outdoor photos, the Fade filter works well.

Similar Messages

  • Basic Layout not rendering correctly.

    ''locking as a duplicate of https://support.mozilla.org/en-US/questions/1035123''
    Hello,
    I've been trying to debug a problem I was noticing on my production websites, so I dumbed it down to a quick codepen to show off the issue. http://codepen.io/anon/pen/GgoBNJ
    Basically, standard fonts (helvetica, arial, etc.) are not rendering correctly within a div. For some reason the text is pushing itself up ~2 pixels. Not to mention, fonts are looking very jagged within the browser for no apparent reason.
    I am setting up a basic div with hardly any styles and yet this produces two different renderings within FF and Chrome
    .box{
    font-family: Helvetica, Arial, Sans-serif;
    font-size: 14px;
    border: 2px solid #FF5500;
    display: inline-block;
    width: 100px;
    This is causing me all sorts of headaches with designers who are trying to make layouts pixel perfect as I have zero control over something like this. Any help would be greatly appreciated!
    Thanks in advance.

    You may have zoomed the page(s) by accident.
    Reset the page zoom on pages that cause problems.
    *<b>View > Zoom > Reset</b> (Ctrl/Command+0 (zero))
    *http://kb.mozillazine.org/Zoom_text_of_web_pages
    You can right-click on a web page and select "Inspect Element" to open the Inspector (Firefox/Tools > Web Developer).
    You can check the font used for selected text in the Font tab in the right pane of the Inspector.
    *https://developer.mozilla.org/Tools/Page_Inspector
    You can do a font test to see if you can identify corrupted font(s).
    *http://browserspy.dk/fonts-flash.php?detail=1
    You can try different default fonts and temporarily disable website fonts to test the selected default font.
    *Tools > Options > Content : Fonts & Colors > Advanced
    *[ ] "Allow pages to choose their own fonts, instead of my selections above"

  • Rollover text not rendering correctly in Safari 7.x

    Safari 7.x and my blog (NotNecessarilyPretty.com) are not getting along.
    Specifically, the rollover text in the post titles (see attached or visit site) is not rendering correctly. The right edge of the text does not change to the correct color. Have been in contact with Apple as well as the theme's developer, but have yet to be offered of a fix. 
    This blog displays correctly when accessed via Chrome or Firefox, and prior to Mavericks, Safari evidenced no problem.
    Thoughts on how to correct this?
    Thanks!

    The original screenshot didn't show here, so for anyone else reading, who may well know much more about CSS & Safari than I :
    changes to this - note the right edge
    But with word-spacing un-checked in Inspector...

  • 'Sorry, Too Many Cards' message NOT rendering correctly

    I'm seeing the 'Sorry, Too Many Cards' message not render properly for me on Palm Pre 1.3.1. I rebooted the phone and was able to reproduce the problem by opening up many cards. I have uploded a screenshot: http://img188.imageshack.us/img188/6525/browser20091511171212.png
    As you can see, the 'OK' button is not rendered correctly. If I remember correctly it supposed to be a green button? Also, the right side box is supposed to have an icon or something. I've never seen this error message NOT rendered properly before 1.3.1.
    BTW, like others have posted - once I get to a memory threshold I can't even open up core apps - like 'Device Info' (in case I needed to reboot the phone). I would have expected some high availability on these apps w/r/t memory management.
    I would upload more debugging information if I knew how on the Pre. But like I said I was able to reproduce on 1.3.1 before and after a reboot.
    Thanks,
    Post relates to: Pre p100eww (Sprint)

    lblumen wrote:
    Am getting same message.  Since new update was downloaded.  Also, I am getting the too many cards open message daily, even when no other cards are open
    I'm having the same problem. Usually I will have Tweed open along with the Camera app. I try to send a photo by email and I get the "too many cards open message". Sometimes when I turn the screen off and turn it back on it fixes it. But today I only had the Photo app open and was trying to send a photo by email and i got the "too many cards open message". The same happens when I only have one program like the emailapp then click on a link. Right now I have NO apps open. I'm trying to open the camera app and it keeps giving me the warning. It's very annoying, especailly when you are trying to do some quick. Oh don't get me started on the the slowness of the system ...

  • Why is my .psd file not rendering correctly in ae

    Some layers of the .psd document are not rendered correctly. However they are imported.
    The strange thing is that when I first move from Photoshop to Illustrator, save it as an .ai file it is rendered properly (in Ae).
    I am kind of clueless as to what is causing this issue.
    Kind regards,
    Jelle

    Okay if more information is needed, i'll provide. However you may disregard my initial comment about illustrator. It flattens the photoshop layers so I do not have any flexibility in After Effects. In other words, my main question remains: why is my psd file not rendering correctly in ae?
    Further details:
    -photoshop cc and after effects cc.
    -macbook pro retina
    If still not clear enough, please tell me what details you are looking for furthermore

  • [SOLVED] KDE4.3 is not rendering correctly the images in the desktop

    I've posted a bug in KDE because the KDE images are not rendered correctly:
    https://bugs.kde.org/show_bug.cgi?id=202829
    You can see an image of my desktop at:
    https://bugs.kde.org/attachment.cgi?id=35921
    As someone suggests, and I also agree with him, it would be a driver problem. My graphic card is "ATI Radeon X1950 Pro" and I'm using the "xf86-video-ati 6.12.2-2" driver. I know that there are other possibilities according to this wiki:
    http://wiki.archlinux.org/index.php/ATI
    I already tested them with KDE4.2 and xf86-video-ati provided the best result for me.
    Someone with an ATI card has the same problem? Which driver would you suggest to me?
    Thank you
    Last edited by jjjaime (2009-08-06 19:04:12)

    Thank flamelab for your help.
    The xf86-video-ati-git:
    http://aur.archlinux.org/packages.php?ID=15374
    fixed all my problems. Probably you've heard about it Now, I don't have any rendering problem and I have enabled the Desktop effects. I tested it with and without the xorg.conf file. Both of them worked, but without the file I don't have my keyboard in Spanish.
    I read that it was possible the KMS support. I tested it by changing from graphical to text mode but it takes some time so I guess that it's not enabled. Is there any way to test KMS?
    Is it possible to upgrade the AUR driver to the official repository? Meanwhile, I will comment my problem in the KDE site.
    Best regards,
    Jaime

  • Spot colors not showing correctly in acrobat 11

    Spot colors not showing correctly in the output preview as well as the page correctly. I have a spot pms
    295 on a page in a few different areas of text and backgrounds. The spot color shows on 1 of my backgrounds
    and text and a spot color on another background does not. These items are on the same page. Although I
    can use the eyedropper to check the color of these items and it states the spot color is present. The page
    also prints correctly. Previews not happening.

    I included 3 screen shots from Acobat 11 of the test requested. Also, included the last screen shot from Acobat 9 of same file.
    Which shows correct preview. To eliminate possible ICC profile issue. I did change profiles to all that were in the profile list
    with no change in either test.

  • PDF not rendering correctly

    Hi
    Can anyone help? I am using an iMac and have had a pdf emailed to me. When I login on to the site and select the PDF to view, it is not rendering correctly.
    I am not a technical person but to me it appears to open as a series of code, letters, numbers and symbols.
    Any ideas how to rectify this?
    Is it Adobe related or can I update the settings for the browser? I am using Safari.
    Thanks

    what OS & Safari version ?
    Often, removing any 'pdf' plugins in
    /Library/Internet Plug-Ins/
    and
    ~/Library/Internet Plug-Ins/
    then restarting the browser will solve pdf display issues, although in this case, it sounds as if the site is telling Safari that these are text type files & it's attempting to display them accordingly.
    Disabling plug-ins via Safari - Preferences - Security should also eliminate pdf plug-ins as a cause.

  • RequestCenter emails not rendering correctly in Outlook 2007

    RequestCenter emails not rendering correctly in Outlook 2007
    I'm having an problem where the RequestCenter automated emails are losing most of their HTML formatting when viewed in Outlook 2007.  When I look at the same email in Outlook 2003, the HTML formatting is fine.  Here's a picture of the same email displayed in Outlook 2003 and 2007:
    When I view the source HTML of the email, I noticed that there are duplicate HTML, HEAD, and BODY tags that have been automatically added by RequestCenter.  Apparently these extra tags are ignored by Outlook 2003, but cause problems with Outlook 2007.
    This picture shows the HTML source in RequestCenter's HTML editor compared to the HTML source from within Outlook with the extra tags.
    I tried removing the HTML, HEAD, and BODY tags in the HTML editor, but the editor puts the tags back in when you save it.
    Does anyone know how to fix this?
    Thanks,
    Scott

    We've actually had the same problem and had opened a ticket with customer care - it's the editor that's in the version we have (or had, since we are going through the upgrade).  What we've had to do is embed xml tags in the body of the email too, and then the team that processes the email has a little application that will process the data in the tags and strip the HTML that the editor applies.  Not much help, I know. 
    I've heard a rumor that the issue is fixed in 2007 with the new text editor - I'

  • Colors not printing correctly. Only blue and black work.

    I just got a new HP OfficeJet all in one inkjet 8620 printer. The colors aren't printing correctly. Everything comes out light blue with black lettering. I tried installing new cartridges (genuine HP) and also tried gently shaking the cartridges. But the problem persists.

    Hi @Iolanthe ,
    I see that you are experiencing issues with the colors not printing correctly. I would like to help you resolve this issue.
    I have provided a document with some steps to try to see if that will resolve the issue.
    Fixing Print Quality Problems for the HP Officejet Pro 8610, 8620, 8630, 8640, and 8660 e-All-in-One...
    Please let me know the results of the Print Quality Diagnostic Page?
    If the test pages are printing properly, it could be a software issue.
    What operating system are you using? Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
    Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name. (Officejet 8620)
    If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
    Let me know how the printer name was listed.
    From the application, make sure you are selecting the proper paper type.
    Try another application to see if you have the same issue.
    How is the printer connected? (USB/Ethernet/Wireless)
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Adf application not rendered correctly with url ip and url localhost.

    Hi all.
    I have a strange problem. When I enter to my adf application deployed in a local stand alone weblogic server with the ip:
    http://localhost:7001/Application/faces/index
    it renders fine. But when I load it with the url:
    http://10.5.14.15:7001/Application/faces/index (private ip), it doesn´t render fine. Tables haven´t the same style, and some elements appear selected like if I have selected them with the mouse.
    This problem only happens with internet explorer, not with Chrome.
    Also when I see a table inside a region in a jspx, the with of the header of the columns is not rendered correctly, causing the width of the header row not be the same than the other rows.
    This problem also happens only with internet explorer.
    Any help please?
    Internet Explorer 8. JDeveloper 11g.2. Weblogic 10.3.5.0
    Also happens with Internet Explorer.
    Maybe encoding? doctype?
    Thanks

    What would the DOCTYPE have to do with the IP address?
    Have you looked at the HTML source in the different browsers and tried to debug what's wrong? Sounds like there may be some images/css files that aren't being downloaded in IE when you use that IP address. Are you sure IE isn't configured with a proxy?
    John

  • Gray image not shown correctly in photo app

    Hi, in my iphone App, I create a Gray CGImage. Some code is here:
    colorSpace = CGColorSpaceCreateDeviceGray();
    if (colorSpace == NULL)
    fprintf(stderr, "Error allocating color space\n");
    return NULL;
    CGDataProviderRef dataProvider =
    CGDataProviderCreateWithData(NULL,
    myimagebuffer,
    bitmapByteCount,
    NULL);
    CGImageRef cgImage = CGImageCreate(col,
    row,
    8,
    8,
    col,
    colorSpace,
    kCGImageAlphaNone,
    dataProvider,
    NULL,
    false,
    kCGRenderingIntentDefault);
    And then I use this CGImage to make a UIImage. This image shows OK in UIImageView. I also use UIImageWriteToSavedPhotosAlbum to save this gray scale image to photo album. But when I open iphone native Photo app, this image is not shown correctly.
    Anyone has the same experience?
    Thanks,
    fm

    Post Author: JeffI
    CA Forum: Older Products
    Because I am sure other people will encounter this issue, I will post the solution here...The issue lies in what program is associated with .bmp files. In my specific case the customer had PhotoSuite 4 by Roxio associated with opening bmp files.  I am not sure exactly why (perhaps it doesn't support drag-and-drop?) but if you create a .reg file and import this it should fix the problem. The bolded part is the important part. Windows Registry Editor Version 5.00&#91;HKEY_CLASSES_ROOT&#93;&#91;HKEY_CLASSES_ROOT\*&#93;"InfoTip"="prop:Type;DocAuthor;DocTitle;DocSubject;DocComments;Write;Size""QuickTip"="prop:Type;Size""AlwaysShowExt"="""TileInfo"="prop:Type;Size"&#91;HKEY_CLASSES_ROOT\.bmp&#93;@="Paint.Picture""PerceivedType"="image""Content Type"="image/bmp"&#91;HKEY_CLASSES_ROOT\.bmp\OpenWithList&#93;&#91;HKEY_CLASSES_ROOT\.bmp\OpenWithList\MSPaint.exe&#93;@=""&#91;HKEY_CLASSES_ROOT\.bmp\OpenWithProgids&#93;"Paint.Picture"=hex(0):

  • Colours not rendering correctly in terminal

    Hi,
    I have just installed Arch on my laptop, and I am getting everything setup. When I run alsamixer something goes wrong, the screenshot below speaks a thousand words.
    When I use the arrow keys to change widget focus the previous widget tends to disappear all together. When I exit alsamixer the terminal is useless, typically no text is shown. The terminal does accept input however.
    The problem is reproducable in both XFCE4 Terminal and xterm. My .bashrc looks like
    alias ls='ls --color=auto --group-directories-first'
    alias grep='grep --color'
    alias ll='ls -lh'
    export PAGER='/bin/less'
    export EDITOR='/usr/bin/vim'
    export PATH=~/bin:/sbin:/usr/sbin:$PATH
    export PS1='\[\e[32m\]\h \[\e[0m\]\$ '
    export MPD_HOST=127.0.0.1 MPD_PORT=6600
    complete -cf sudo man which
    Another thing to note is that the problem affects all open terminals, not just the one alsamixer was run on. Also, once in a rare while 'grep --color' can produce the same effect.
    Phil

    Hello,
    In the USBC CSS , delete this:
    TD {
    font-family : Arial, sans-serif;
    float: right;
    Take care,
    Tim
    "bhanson" <[email protected]> wrote in
    message
    news:gp3ups$l6j$[email protected]..
    >I recently switched from Dreamweaver 8 to CS4. I also
    recently updated my
    > Firefox to 3.06. I have had this website for years, and
    it just started
    > not
    > rendering tables correctly in Firefox. This is happening
    on multiple pages
    > It
    > works fine in IE.
    http://www.wiw.uscourts.gov/bankruptcy/
    >
    > Let me say up front, I know the page is antiquated
    (created in Front Page)
    > It
    > uses tables for the layout instead of CSS. I hope to be
    updating it soon,
    > but
    > for now I need a fix to get the pages to work correctly.
    >
    > Any help would be greatly appreciated!
    >
    > Thanks,
    > Becky
    >
    >

  • Non-English fonts not rendering correctly in iMovie 10.0.3?

    I use xenotype Tibetan font in iMovie and it has always rendered correctly until I updated from 10.0.2 to 10.0.3. Now many of the stacked characters do not render correctly in any of the titles. Even projects that I made three months ago with 10.0.2 when opened in the new version render the font incorrectly. Is there a reason for this change? Is there any adjustment I can do? Line-height adjustment? iMovie 10.0.3 seems to be the only Mac software currently made by apple that doesn't render the font correctly.

    Hello,
    Welcome to the discussions. There have been some transition problems reported, although maybe not so many problems as you are experiencing.
    I had the black/flash with the transition cross-dissolve in one of my movies recently. I found the suggestions in this thread to resolve that: http://discussions.apple.com/message.jspa?messageID=3842119#3842119
    Have a look and see if it can help you.

  • JSP page not rendering correctly for remote system

    I have a jsp page that has an HtmlGraphicImage component that gets set by a method in a java bean using
    image2.setUrl( imageFilename );
    When I run the application on my local system (my development system running Studio Creator) the page comes up on my web browser with the proper image.
    However, when I try to access the page from a remote PC, the page comes up okay with all the static components, but the image is blank. When I look at the page source on that browser, the image url is set to blank (i.e. nothing inside quotes).
    Any ideas why this image is rendered correctly on my local system and not remotely?

    <title>Home</home>Find the mistake!

Maybe you are looking for