Colors print differently when using different printers.

When I print from Illustrator 3 to a Xerox printer, my bright yellow prints bright yellow. When my project is sent to a HP Designjet T1100ps plotter/printer, my bright yellow prints as an orange color. How do I fix this? What am I doing wrong?

I was wondering if you could ever get them to look the same. It's two
different printers on two different papers. Still, you'd think they could
be closer than you're getting.
Richard

Similar Messages

  • Printing problem when use multiple printers

    Hi to all,
    we are using printing through multiple printers in the network, after u start the machine if u use one printer it is ok, when the time u start printing with another printer the problems start like it starts from middle of the page or it prints half of the page then it leaves balnk remainig. etc. the printers \we are using are one is EPSON LX-300+ and another is HP Laser 1200. we are using orginal softwares suppliers by the prinnters.. Oracle reports developer6 is the reports.
    any one has got experice in this.
    Thanks in advance..

    Can you access page1 and page2.jsp correctly on their own?
    ie could the problem be with page2.jsp rather than the import command?

  • Can not print report when using HTML or DHTML

    Can not print report when using HTML or DHTML. When I open the report and click the print icon I get a small blank dialog box and then nothing. If I change to activex it works and I can print.
    Any Ideas?
    Thanks
    Jeff

    Hi,
    I did not come across this situation before. Did you apply any fix packs. Try to check whether its a issue which can be fixed by applying fix pack( try to check release notes of fix pack and see if they mentioned any thing about this).
    Thanks,
    SK.

  • HP Photosmart 8750 prints slow when using Photo Gray Cartidge

    HP Photosmart 8750 prints slow when using Photo Gray Cartidge ... sometimes indicates Black Cartridge failed, however upon reinserting works slow

    Welcome to the HP Forums ButchG,
    I see by your post that when printing with the photo gray cartridge the black cartridge will indicate that it has failed.
    I can help you with this issue.
    I would do a power reset to see if that will resolve the issue.
    With the printer still turned on, disconnect the power cable from the back of the printer, if the printer has external power module with a detachable power cord disconnect it for 15 seconds and then reconnect it.
    Hold down the power button for 10 seconds to drain the power.
    Then disconnect the power cable from the wall outlet.
    Wait 10 seconds and reconnect the power cable back to the wall outlet first, then the back of the printer and power it on again.
    Make sure the printer is connected directly to wall outlet. (don't use a power hub or a surge protector)
    I have provided a document for the cleaning the contacts and reseating the cartridge.
    'Cartridge Failed' or 'Cartridge Not Compatible' Error Message.
    What are the ink levels?
    Are you using Genuine HP Cartridges?
    Check the date on the cartridges to make sure they are still in warranty. (not old stock)
    If you need further assistance, let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Disable print output when using bapi BAPI_GOODSMVT_CREATE

    Hello,
    I am using BAPI BAPI_GOODSMVT_CREATE to post material documents in our programs.
    I wish to prevent the print output of the documents created by the BAPI.
    Meaning - when the user post good movement using MIGO, there will be a printout of the movement, but if the movement is created using BAPI_GOODSMVT_CREATE, no output will be printed.
    I have tried sending blank values in fields VER_GR_GI_SLIP & VER_GR_GI_SLIPX in GOODSMVT_HEADER structure, but to no avail.
    Is there a way to disable printing ONLY when using the BAPI?
    Thank you very much.

    Hi,
    We cant restrict the print preview or print out of the material document. Once the condition record has maintianed for the material document, it ll applicable for all the material doc . It would be manual Gr or BAPI GR.
    In your case Print is coming automatically or user is taking the print !!
    Regards,
    Dhanush.

  • Cannot print anything when using safari

    Cannot print anything when using safari.  OSX is Mavericks.  Printer is Canon MP620.  Have downloaded Mavericks  software for printer, but still will not print.  I have also repaired the disk hoping that would solve the problem, but to no avail.  Can anyone help me please?

    Hey ivorfromborehamwood,
    Thanks for using Apple Support Communities.
    For more information, take a look at:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Have a nice day,
    Mario

  • Why are printer managed color prints different from Photoshop managed color prints using the same color profile?.

    I'm using Photoshop 13.0.1, Windows 7, to print images using custom color profiles made with an XRite colorimeter.  However, when I print the image using Printer Manages Color, it is not the same as Photoshop Manages the colors and selecting the Canon ICC profile that (Canon 7200 MP2) that is the same as the printer managed settings.  Why are these prints not the same if the same color profile is being accessed??

    Hi WA Veghe,
    >First: DO synchronize, makes sure you have the same profile settings and color mange settings.
    I don't seem to be able to synchronize between CS4 (Photoshop) and CS3 (Indesign).
    It seems I have to do without synchronizing..
    >I do not seem to find HOW you are diplaying images on you screen: with Soft proofing?
    What happens if you soft proof in Photoshop and InDesign on screen: View > Proof colors. Do you proof with the same profiles, both simulate paper and black on?
    I can simulate Proof Colors (working CMYK), but not simulate Paper, both in Indesign and Photoshop.
    Problem is: SAME settings in Photoshop and Indesign BUT the image displayed in Photoshop is brighter and more saturated.
    So which image should I correct after?
    thanks for all help
    /L

  • When using 2 printers at 2 locations. Rather than make sure the correct printer is shown when I print is there a way to make one change when I change locations?s there a way to

    I have 2 residences each with a printer. When I move from one place to another and try to print I always have to make sure the correct printer is shown in the print window. What can I do to make one change on my MacBook Pro when I change locations so I am not bothered with this nuisance problem?

    There was a way from OS9 location manager to set a default printer for any given location. This is not the case in OSX.
    You can however, easily change the default printer in Terminal.app with lpoptions -d PRINTERNAME. To view all the printers type lpstat -p. Keep in mind that the name in lpstat -p may be a little different than the name in Printer Setup Utility. You must use the lpstat -p, PRINTERNAME when changing it in Terminal.app. Of course, if the names are the same, you don't need to worry about it.
    PowerBook G4   Mac OS X (10.4.9)   MacBook Pro

  • Forms 6i prints ugly when using the Forms print command from the menu

    When we use the Oracle Forms print built-in to print the screen-shots, the print-out turns out to be ugly with lots of dots all over.
    We are using Forms 6i (6.0.8.11.3) running on 9iAS on Windows 2000. The version of JInitiator we are using is 1.1.7.31. The forms open up in a separate frame.
    The interesting thing is when we print from a Windows 2000 machine, the screen-prints are OK. But they are messed up when we use a windows 98/95 machine.
    Any suggestions folks? Thanks

    Craig Bagley1 wrote:
    Any clues? I don't find anything in the Finder Help files to explain the Print command's use.
    If in the Finder I pull down the "Help" menu and type "Print" in the "Search" box, I see one "Menu Items" entry and five "Help Topics". If I click on the one for "Printing a closed document", it shows information that discusses printing one document at a time. I don't know if it's possible to print more than one document that way.
    Try this: Open the "Print & Fax" panel of System Preferences. Drag the printer's icon from the list on the left onto your Desktop. The result will be an icon that is an alias for the printer. Now try dragging several documents onto that icon.

  • Printing dark when using shared printer

    I am having problems getting Lightroom 2 to print correctly when printing to a shared Epson 4000.
    When printing to the 4000 as a local printer everything works as it should. But when I try to print to the same printer, with the same settings as a shared printer in a small network the prints turn out too dark and with colour casts.
    Using epson profiles and pointing lightroom to the correct profile. Setting printer driver correctly (when i print the from photoshop CS2 it prints correctly, even when using a shared printer).
    Epson 4000 using the latest 3.09 driver. OSX 10.4.10 on imac G5.
    Any help appriciated, strange that everything works great on a local printer but not on the same printer when shared over the network (printersharing in OSX)
    Am certain I have profile selection and printer driver settings correct ( after all it works from photoshop and locally).

    Dear Larry,
    Thanks for reporting the problem. You mentioned that page content is getting shifted by around 3/8 inches when printed using Mac Airprint using Acrobat which resulted in clipping of some of the content and other applications print fine.
    Could you please pass on the same pdf to me as well? Although, it doesnot look dependent on any particular pdf but I would like to analyze certain behavior with the pdf you are using.
    Please also confirm that you have not printed with "None" pagescaling option when you observed this.
    Thansk,
    Atul

  • Date selection will not print properly when using Microsoft Date and Time Picker Control 6.0 in Excel 2010

    I have created a field input worksheet in which the user identifies start and end dates for training sessions, using the Date and Time Picker Active X Control.  It works fine on-screen, but when the worksheets are printed, the dates that were selected
    using the date picker calendar print out in an unreadable, huge font.  The large font also appears in the print preview mode.  I've tried modifying various properties in design mode, but nothing that I have tried will correct the problem. 
    Any ideas?

    The DTPicker seems to have some bugs in it when used on a worksheet. I have overcome the above by setting the size properties to the same size as a cell and the Linked cell property to the
    cell under the DTPicker. (Even setting the Linked cell had problems with an error message referring to the Check box property to be set to true so I just set it to true and inserted the linked cell and set the checkbox property back to
    false.)
    Then the VBA code below that Hides the DTPicker after a date is selected and unhides the DTPicker when the linked cell with the date is selected. The code is for 2 DTPickers so you will need to edit to suit your requirements.
    Caveat: If the DTPicker is visible then you can't hide it by selecting the same date again. If this occurs then it is a multi step operation. First select another date and the DTPicker will hide, then click on another cell then back on the cell with
    the date to unhide the DTPicker and then select the correct date.
    Hope it helps and feel free to get back to me with any questions etc.
    Private Sub DTPicker1_Change()
        Me.DTPicker1.Visible = False
    End Sub
    Private Sub DTPicker2_Change()
        Me.DTPicker2.Visible = False
    End Sub
    Private Sub Worksheet_SelectionChange(ByVal Target As Range)
        Select Case Target.Address
            Case "$E$5"     'This is the linked cell for DTPicker1
                Me.DTPicker1.Visible = True
            Case "$E$13"    'This is the linked cell for DTPicker2
                Me.DTPicker2.Visible = True
        End Select
    End Sub
    Regards, OssieMac

  • Can't print duplex  when using a CS2 doc in CS3

    I can't print duplex when opening an old cs2 file in cs3, even when re-saving as a cs3 file. I can print duplex when creating a new document in cs3. The printer is a Xerox 242 Fiery. Any ideas?

    I have the same problem with a DocuColor 5065 with firey. InDesign will never remeber the print settings for old CS 1 documents. New CS3 documents are fine. Only happens with this Fiery, all my other fierys work fine. Funny thing is even older documents (v1.5) remeber the print settings fine.
    What I do to get around is to just send the file to the RIP, then change the print settings there to what I want then print.

  • Excel 2013 bug printing when using two printers with same driver

    Hi,
    Was advise by "Community" to post this one here.
    The environment:
    Window 7 Sp1 x64
    Office 2013 Sp1 32 bit
    Windows 2012 Server (current patches).
    Two IDENTICAL network connected printers shared from above Windows 2012 server.
    As the two printers are the same, they both use the same printer driver.
    Printer A is set to Greyscale. This is the default printer.
    Printer B is set to Full Colour.
    Open Excel and start a blank worksheet.
    Choose Print - this shows the default printer (Printer A) - then Printer Properties - this verifies that the Default Printer is set to Greyscale as expected.
    Change printer within Excel to Printer B - then printer properties again - this shows us that printing is STILL in Greyscale ignoring the Printer B settings. Printing will indeed produce a greyscale print on Printer B.
    The reverse is also true - if we set Printer B (Color) as the Default, then choose Printer A (Greyscale) inside Excel, it will then show (and print) in Full Color - ignoring the printer A setting of greyscale.
    This ONLY occurs when connecting to Shared Printers on a Windows host (Server 2012 in this case).
    Direct IP printing from Win 7 to the printer works as expected (printer settings honoured).
    Non-Windows server based printer sharing works as expected (printer settings honoured).
    This ONLY occurs in Excel. Other programs including other Office components do not exhibit this bizarre behaviour.
    This ONLY occurs where the same driver is used by both printers.
    In effect, Excel is transposing the Default printer's settings onto whatever printer is chosen if it uses the same driver.
    Installing Office 2013 Service Pack 1 made no difference.
    This appears to be a long running issue (search result show Excel 2007,2010* and Windows 2008R2 server references).
    *Confirmed same behaviour with Windows XP and Excel 2010.
    This appears to affect multiple brands of printer (Xerox, Konica Minolta). Confirmed with 3 different generation Konica Minolta (Postscript) copiers and Dell multifunction (with PCL drivers).
    Does anyone have a solution for this ? 
    Is there a setting hidden in Excel that should be changed ?
    Is there a server setting to "isolate" the two printers from each other ?
    Regards
    Ian

    KR,
    Thanks for the reply but note I said "The reverse is also true - if we set Printer B (Color) as the Default, then choose Printer A (Greyscale) inside Excel, it will then show (and print) in Full Color - ignoring the printer A setting of greyscale."
    Also, it is the printer properties that are being set. I believe the setting you refer to is per worksheet ?
    Cheers
    Ian

  • Printing colors not correct when using  non printer software

    I am using a new CANON MX882. When I print using the Canon easy photo software the print turn out perfect. However when I print from Aperture or Photoshop Elements the pictures turn out with the colors blown out and overexposed. I have the lates drivers availabe from Canon which they say is compatible works with 10.7. I have tried using the printer manament or the software and it doesn't make any difference. Any thoughts on whats next? I am wasting all sorts of paper trying to figure this out.
    thanks
    Chris

    I don't have Aperture or PSE but I do have Photoshop CS5 and with that application the best settings are to let the printer manage the colours. I have some grabs from the PS5 print dialog for your reference.
    From the PS5 print dialog, from the Color Management menu the Color Handling is set to "Printer Manages Color".
    When you select Print and the normal print dialog appears (or you open Print Settings from the PS5 print dialog) select the Color Matching menu and ensure it is set to Canon Color Matching.
    And the last thing to check is the Quality & Matching menu for the Canon printer. The colour profiles for the printer are based on different paper stocks. So it is important that in the Media Type menu you select the type of paper being used and you also want to select High Quality.

  • Color prints different -- shade of color is darker

    Hello.
    Hopefully someone can help me.. I'm designing my daughter's baptism invitation on PSE, it look great on the PC screen, however when I print the colors look darker.  Is there a setting I should be using so that the color is true to the screen color?  What am I doing wrong???
    TIA
    Valerie

    Unfortunately there is no simple answer to this question.  I would suggest you read these notes on my web site.  I've tried to keep them basic and they do relate to Elements, albeit and earlier version.
    http://homepage.ntlworld.com/colin_w/colour%20problems.htm
    Colin

Maybe you are looking for

  • How can I transfer all my files from my i-phone 4 to my mac computer?

    I have alot of files on my old I phone 4. I would like to back them all up on my mac so I'll have them when I buy a new phone when they come out. Loke notes contacks    etc. can it be done? thanks for the help. It seems all the phone wants to do is c

  • Is it possible to build a second ssd in my MacBook?

    I've one SSD in my macbook (500GB) but it's not enought storage. Is it possible to place a second ssd in my macbook?

  • Integration on quality module and sd module

    Hai experts Any integration on quality module and sd module in sap if yes where the integration point.......... thanking u..... regards anjan

  • Using custom SessionCookieFactory

    Hello. I’m trying to use derived SessionCookieFactory defined as the jbo.ampool.sessioncookiefactoryclass parameter in my ApplicationModule. I’m trying to use code: public SessionCookie createSessionCookie(String name, String value, ApplicationPo

  • DHCP Server 2008 R2 Scope Full Warning

    Is there a way to disable DHCP Scope Full Warning message from flooding my event logs? We use DHCP to lock down the ports at our office. Is there some registry setting I can do to prevent them from writing to the event logs so often?