ColorSync Quartz Filter not accepting name

I have tried creating a new Quartz Filter for PDFX-3 in ColorSync Utility.
Besides the overall lack of documentation and guidance, I can not name the new filter with anything other than XXXXXX. Everything else just reverts back to Untitled.

I also have this problem, using OSX 10.8.5

Similar Messages

  • After power on will not accept name and password

    Having trouble with MacBook Mac OS X 10.6.8
    At start up will not accept name and or password. Gives IP address info then network accounts unavailable.

    Hi Beebop1991,
    I'm sorry to hear you are having issues with your Administrator User account and password.
    It sounds like your computer is booting up to a network drive instead of your Macintosh HD.
    If this is the case, follow these steps:
    Startup Manager: How to select a startup volume
    Follow these steps:
    Turn on, or restart, your Mac.
    Immediately press and hold the Option key. After a few seconds, the Startup Manager should appear. The Startup Manager scans for available available volumes.
    Use the left and right arrow keys on the keyboard to select the volume you would like to use.
    Press the Return key on your keyboard to start up the computer from the volume you selected.
    If this does not resolve your issue, and you need to change your Administrator password, follow the steps below for Snow Leopard:
    OS X: Changing or resetting an account password
    In Mac OS X v10.6.8 or earlier, follow these steps to reset a password when there is only one administrator account on the computer, or if the original administrator account needs a password reset. "Original" administrator account refers to the one that was created immediately after installing Mac OS X. If the original administrator password is known, that administrator account may be used to reset the passwords of other administrator accounts using the steps described above. These steps require an optical drive; if your Mac does not have an optical drive and you have a Mac OS X v10.6 Install disc, see below.
    Start up from a Mac OS X Install disc (one whose version is closest to the version of Mac OS X installed).  Usually, you can start from the disc by putting it in your computer, restarting, and holding the C key. Or, put it in the computer and click the Install or Restore icon you see in the disc's main window (after which the computer will start from the disc without you needing to hold C). Or, you can use Startup Manager or the Startup Disk preference pane to select the Install disc.
    Choose a language, click the arrow button to continue,
    Mac OS X v10.6 or later: Choose Password Reset from the Utilities menu.
    Mac OS X v10.5 or v10.4: Choose Reset Password from the Utilities menu.
    Mac OS X v10.3: Choose Reset Password from the Installer menu.
    Tip: If you don't see this menu or menu choice, you're probably not started from the disc yet.
    Note: The default keyboard layout is U.S. English while started from the installation disc. If you use a keyboard layout other than U.S English, use the Input menu (the flag icon on the right side of the menu bar) to select the desired layout before typing a new password.
    Select your Mac OS X hard disk volume.
    Select the user name of your original administrator account.
    Important: Do not select "System Administrator (root)". This is actually the root user. You should not confuse it with a normal administrator account.
    Enter a new password.
    Click Save.
    Click the red button in the upper left corner to quit the application.
    Choose Quit Mac OS X Installer... from the Mac OS X Installer menu.
    Click Restart.
    After following these steps, you'll want to also follow the steps in this article.
    Mac OS X v10.6: Resetting the original administrator account password on a Mac that has no optical drive
    These steps require a second computer that has an optical drive.Note: If the second computer is a Mac, make sure Mac OS X v10.5.3 or later is installed. If the second computer is a PC, make sure the DVD or CD Sharing Update 1.0 for Windows is installed.
    Open "Remote Install Mac OS X" from the Utilities folder.
    Follow the onscreen instructions.
    For more information, see Sharing DVDs or CDs with Remote Disc.
    Additional Information
    You can press the Eject key on the keyboard to eject DVD media.  Inserting a startup DVD will add that DVD to the list of startup volumes (as in the image above).  You can also attach FireWire or USB external hard drives to add to the list of startup volumes.
    This startup volume selection is temporary.  To set the default startup volume for your Mac after your computer is running, open System Preferences and choose Startup Disk from the View menu (in Mac OS X) or open the Boot Camp control panel (in Windows).
    I hope you are back on track soon!
    - Judy

  • HT5858 will not accept name email or passwordl

    Trying to set up an email account with google and it will not accept my name email or password

    Check that in Settings > Safari > Block Cookies you do not have this set to Always.

  • Character data type not accepting name

    Hi all! i have declared a characteristic object as "CHAR". But when i have given input as "ram" it is throwing the error "special characters not allowed". I have not given any special character. Can somebody help me out in this issue?

    In BI system use t-code RSKC then you get screen with Permitted extra characters then enter ALL_CAPITAL then click on execute button. You can allowed characters in the table RSALLOWEDCHAR.
    It seems your problem is you are loading small case letters into your infoobject. By default characteristic does not allow lower case letters, to allow lowercase letters--- open the characteristic --- In general tab -
    check the ckeckbox for Lowercase letters.

  • Oracle SQL Developer - File, Open , File Name Not Accept UNC Path Form

    In Oracle SQL Developer, at least the File, Open (Dialog's), the File Name (if not all File / Directory Name) Text Box(es) is (are) not accepting, at least for me, the UNC Path Form of Folders on Network Servers. The same UNC Path (or UNC Paths in general) works in the File / Directory Name Text Box of every other Windows App I've tried (from Windows 95 to Windows 7). Is there a way to do this? If not, was it intentional and where can I suggest this as a fix / enhancement?
    I'm using Windows XP w/ SP3.

    DUH! I figured out what happened. In my first search, I searched (using "Actions", "Filter", "Column" option) for "Title Contains 'UNC'" which didn't find anything because the single-quotes were considered literals (which isn't consistent with the "Row" option or with the technical SQL syntax one would expect given technical operators like "!=", pffft, "!="??? Really???). Then, all subsequent searches returned nothing, because all previous searches are combined with implied "And" Operators until you select "Actions", "Reset" (which isn't consistent with any Web / Desktop App search feature I've ever seen). Don't get me wrong. The latter is a great feature. It just needs to be documented better.
    It probably wouldn't hurt to: a) include easily visible tips on whether single / double quotes are needed and b) show an "And" Operator in front of each previous search listed so people won't mistake it for simply a Search Criteria History vs. Current Search Criteria, oh and add a heading that labels it as, oh, IDK, "Current Search Criteria", maybe? IDK, call me crazy (or just another stupid user posing as a developer with 16 years experience ;).

  • My 3GS will not accept my correct password and user name to start using the Cloud.  It just spins while "verifying."

    My 3GS will not accept my correct password and user name to start using the Cloud.  It just spins while "verifying." How can I make it stop so I can activate iCloud ?

    try using @me.com instead of your service address, i mean hotmail or yahoo or else, thanks.

  • The pdfs that are produce in Word are very large. I need a method of compressing them variably - not just a quick reduction using the quartz filter.  Is their a suitable free compression programme,

    The pdfs that I produce in Word are very large. I need a method of compressing them variably - not just a quick reduction using the quartz filter.  Is their a suitable free compression programme,

    PDF Shrink for Mac
    Compress PDF – Reduce your PDF Online
    PdfCompress for Mac

  • My mac is not accepting my name and password for login because it is in arabic how am i suppose to login?

    my mac is not accepting my name and password for login because it is in arabic how am i suppose to login? how do i type Mark Yap in arabic, im typing it in pressing the actual letters on the keyboard but wint accept  it?

    I am assuming that you are trying to log in with the English language. If this is the case (or any other language for that matter), see if there is a button on the login screen that allows you to change your language.

  • File URLs -  do not accept spaces in folder/direcotry name?

    Version of US used is: 1.0.3
    I tried to create a file data source with the following file URL from the Administration Application under the Sources/File tab:
    file://localhost/c:/myDir/New Folder/
    But I got the following error:
    Oracle Ultra Search Error
    Invalid file protocol URL:Folder/
    URL does not begin with file://
    Note: It is not a problem if the folder name does not have a space. E.g. when I renamed "New Folder" to "New_Folder", it was fine.
    My questions: Is that correct that US does not accept file URLs with spaces in the folder/directory names? If so, is it the same with the newer release US 9.0.2?
    Thanks.

    Currently space is used as a delimiter in file seed URL.
    Therefore, user can not crawl files located in directory containing space. This is the case for 9.2, 1.0.3, 9.0.2. You raise a good point, I will evaluate the possibility to remove this restriction in our next release (iAS 9.0.4). If we decide to support this, I will update this question.
    Thanks ! ^_^
    Cindy
    This is the text on Create File Source Step 2:
    ===================================================
    Enter a list of URLs separated by valid delimiters. A valid delimiter can be any one of the following characters: a space, tab, newline or comma.

  • My smart TV do not accept ":" in Skype name!

    My smart TV do not accept ":" in Skype name! I am very disappointed because now skype name contains a prefix "live:", now I can not use Skype on my Grundig smart TV.

    live:xxxxx is a generic name that is automatically created when you create Skype account using Microsoft account option. However, this Skype name cannot be used as login ID. You login ID is the email address which you have used to create Microsoft Skype account. Unfortunately, you can't login to Skype on TV using Microsoft account.
    http://community.skype.com/t5/Other-features/MSN-sign-in-on-Samsung-Smart-TV/m-p/1975489#M7425
    The only option you have now is to create a true Skype Name account using this signup form and login with this Skype name on your TV.
    https://login.skype.com/account/signup-form

  • When starting up after a erase/reinstall of Mac OS X 10.6 it will not accept any of my passwords/names

    when starting up after a erase/reinstall of Mac OS X 10.6 it will not accept any of my passwords/names, I had just entered my info and clicked on "continue", the cube began to turn and froze, a translucent screen came over the whole window and request that I restart the computer, after doing so, I got the start up sound and a message saying that OS X was starting up and then the sign in window, but when I entered my info it kept shaking/rejecting it, only thing I can think is that could I have possibly entered my password wrong twice, don't know, I'm still scratching my head.

    Do it again, I'm afraid. Be sure you set up the initial admin account with a proper password you can remember - all lowercase letters and numbers. No special characters or spaces except for the "_" underline character.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Hello! I have installed Photoshop on PC WIN 7 64bit. When I store first time a Photoshop docuument, it works fine - after re-opening and doing changes I trying again to store it - it does not work anymore! First it does not accept the name (message "It ca

    Hello! I have installed Photoshop on PC WIN 7 64bit. When I store first time a Photoshop docuument, it works fine - after re-opening and doing changes I trying again to store it - it does not work anymore! First it does not accept the name (message "It can not be stored because the nam is invalid" With 2. trial it tells me that the data is blocked and I don't have the rights - and I should chenge them. But I am working as the Admin on my PC - and each trial to change the rights of the data is as well not possible because of missing rights - even I am Admin! I must always store the data with a new name, then it works, but I also cannot remove the old datas or shift them into the waste paper - because of no rights! -- sorry for not perfect english, I am German native speaker! Tahnks a lot for help!

    Hi,
    I am using a Nvidia 4200M adapter in my Laptop, Driver 266.96, Direct X 11
    In my desktop I am using an ATI XFX 6950, latest revision drivers (I am not at home right now so I cant get that info).
    The issue I did describe above, but it was a long explanation.
    In some flash games the game files load initially and get as far as the "click to start" button. Then the flash area usually goes either all white or all black (usually depending on the falsh game default background color) and then it stays that color. Cant see anything after hitting start (usually most games have an intro video or animation before the game starts, but I cant see any of it.
    For the very few games that do start, the flash game or application does not seem to work correctly in that when the rare game starts, it wont save any game files or save files to the pc and so if I exit the game (navigate away to another page or close browser) and then later come back, even though I click the option to save games (and ensure that the flash application slider shows it can save files and lots of space) it does not save and I have to start from the beginning all the time.
    More explanation I gave above.

  • HT5621 why does my Iphone not accept my apple id unless it has an email address in it the id name?

    I apparently have two apple ID's as my IPhone 4 would not accept my ID because it was not in the form of an email address.

    Unfortunately, yes. Apple needs to find a way to "merge" Apple ID's, but until they do, it is what it is.
    You're not the only user in this boat.

  • I am trying to restore OSX to my Macbook and the site does not accept my apple user name and password

    I am trying to restore the operating system to my 2007 Macbook but the Apple site does not accept my password.

    You may need to go to this site to reset your password.
    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

  • Black & White quartz filter behaves oddly when creating PDFs

    I think the Black and White Quartz Filter should print all colours and greys as Black. But pale colours and light greys are not printed at all, presumably they are 'White'. Printing all colours as Black is a useful property when printing CAD drawings, for instance.
    I tried to create my own qfilter to do the job, which involves using a 'Bilevel' Intermediate Transform cranked to the max, but the ColorSync utility wouldn't let me rename it anything but 'Untitled'. Smells like a permissions problem?
    I eventually duplicated the Black & White qfilter, which was automatically named 'Black & White Copy'. I was able to edit the actions, but not it's name. Changing the file's name by hand wouldn't change it in the ColorSync Utility.
    Printers available for testing were an HP LaserJet 2100TN, and an EPSON Stylus Color 1160.
    Eric
    Dual 2.3 PowerPC G5   Mac OS X (10.4.4)  

    I think the Black and White Quartz Filter should print all colours and greys as Black. But pale colours and light greys are not printed at all, presumably they are 'White'. Printing all colours as Black is a useful property when printing CAD drawings, for instance.
    I tried to create my own qfilter to do the job, which involves using a 'Bilevel' Intermediate Transform cranked to the max, but the ColorSync utility wouldn't let me rename it anything but 'Untitled'. Smells like a permissions problem?
    I eventually duplicated the Black & White qfilter, which was automatically named 'Black & White Copy'. I was able to edit the actions, but not it's name. Changing the file's name by hand wouldn't change it in the ColorSync Utility.
    Printers available for testing were an HP LaserJet 2100TN, and an EPSON Stylus Color 1160.
    Eric
    Dual 2.3 PowerPC G5   Mac OS X (10.4.4)  

Maybe you are looking for

  • Display comments on mouse over

    Hi Gurus, I need to display comments on mouse over on the cell in web report. In a web report, when a user right click on a cell and click 'Goto' and 'create comment' and enters and saves a comment then I can view the comment using a 'List of documen

  • When is TS14508045 triggered by changing?

    Hello guys, I have a question about the Workflow WS 14500015 in SRM 4.0. When is TS14508045 (Workitem for creator when an approval rejects or changes) triggered, when an approver changes? Which changes of fields cause that the workitem goes back to t

  • XSLT - forcing ultimate HTML processing of open tags

    I wish to process a sidemenu I have, composed of UL and LI elements, using XSLT. My problem is that I need unclosed tags in the XSL stylesheet as part of my processing, since UL and LI elements can be nested (so immediately closing each UL/LI element

  • XMLParser for PL/SQL - Error

    I am using XML parser for PL/SQL in oracle 8.1.7 DB. When i run the sample xml program, i get error which is as follows. While compiling no errors. But while executing it reports error as given below. SQL> exec domsample('/u01/usr/oracle/sso','family

  • J.Nack's blog:  Adobe looking vor volunteer testers of CS4 update

    Today's blog entry at http://blogs.adobe.com/jnack/: January 19, 2009 Photoshop CS4 update in development In the time since Photoshop CS4 shipped, we've heard from some customers about various things not working as designed. In particular, various Wi