ColorSync Utility 4.8.0 Upgrade to 4.10.0 "iBoostUp" is it worth it?

Looking around the application trying to learn more about it how to modify and use the utility. I came across this web sight and its down load to a updated version. Like all third party applications, not sure I get a better tool as a result? Now anything about this upgrade?

Hi,
Depends what part of 10.5 you think you need, but 10.5 does not support Classic Apps, requires 3 times the resources & space, is expensive, & slower than Tiger/10.4 even on a G5 Quad with 10 GB of RAM.
I have run 10.5.8 on a DA/450 MHz/1GB, & it is possible.
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Classic/OS9 Apps no longer supported.
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
There are workarounds if the 867MHz CPU is the only hangup...
http://sourceforge.net/projects/leopardassist/
http://lowendmac.com/osx/leopard/unsupported.html

Similar Messages

I still use Aperture 2.1.4. I need to export an image file with a CMYK profile. Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue. Help?

I still use Aperture 2.1.4. I need to export an image file with a CMYK profile. Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue. Help? Is there some way to add the CMYK profile to the list of choices that are available in the export preset dialogue such that I can choose it?

leonieDF
Thanks for your response. My profiles are located within color sync utility as you can see here:
These profiles do not respond to clicking and dragging. Since they are all in one place, more or less, I'm reluctant to make further attempts to relocate them. Accessing the CMYK profile is the first difficult experience I've encountered with this arrangement. I have never needed the CMYK profile until recently, and that need has now past. However, it remains a mystery to me as to why it does not appear with all the others on the menu of export choices in Aperture 2, or on the menu of profile assignment choices in the Preview application (where again all the other profiles are listed as choices). I'm beginning to think my current set up will permit me to view an image that was created in CMYK space, but does not easily assign, or convert to that space. I don't face these restrictions with all the others, so it remains a curious circumstance for me. I anticipate upgrading my computer and software in the near future which might alleviate this issue altogether. Again, many thanks for your attention to this matter. The reach of this community is astounding.

ColorSync Utility won't open

Anyone else have this problem? I double click the icon, it appears in the dock, and the spinning beach ball simply keeps spinning, until I force quit. This behavior occurs on my iMac as well, which is also running 10.5.1. Both computers are G4s, vintage May, 2004. Both were upgraded from 10.3.9 to 10.5 in December, 2007.
I can get ColorSync Utility to open by opening an image file with the shortcut menu command "Open With...." (ColorSync Utility, in this case). While the program is opened in that mode, the File command "New Utility Window" doesn't operate.

Carolyn,
Thanks for your suggestion. For anyone who may be following along, I had to open a graphic with ColorSync Utility to get ColorSync Utility to launch. Then I clicked the Show Filter Inspector icon in the Toolbar of the ColorSync window that the graphic opened in. That brought up a window with six tabs, one of which is Profile First Aid. In Profile First Aid, I clicked Repair. Here's the result:
(Please let me know if you can't see the graphic. I had a case of difficulty with that yesterday.)
If you can see the graphic, you will be able to notice that five profiles have errors and none were repaired. The Epson Perfection 4180 is my flatbed scanner. I have no idea what the other devices are.
If the graphic is not accessible, here's the text from the repair attempt:
Searching for profiles...
Checking 27 profiles...
/Library/ColorSync/Profiles/EPSON Perfection4180
Tag 'dmnd': Tag size is not correct. Could not be fixed.
Tag 'dmdd': Tag size is not correct. Could not be fixed.
/Library/ColorSync/Profiles/EPSON Perfection4180 TPU
Tag 'dmnd': Tag size is not correct. Could not be fixed.
/Library/ColorSync/Profiles/EW-CIE RGB
Tag 'desc': Tag size is not correct. Could not be fixed.
/Library/ColorSync/Profiles/EW-SMPTE
Tag 'desc': Tag size is not correct. Could not be fixed.
/Library/ColorSync/Profiles/EW-sRGB
Tag 'dmnd': Tag size is not correct. Could not be fixed.
Repair done - 0 out of 5 profiles fixed.
Any further insight would be greatly appreciated.
Regards,
Jerry
Message was edited by: Jerrold Green1

Colorsync utility problems

I'm trying to get my printing straightened out on a 10.4.11 system that has been updated from 10.3.9.
Printing was perfect on 10.3.9, but is not good from the Adobe apps on 10.4.11. I put off upgrading to 10.4 as long as I could, because I knew so many folks had so many issues... I finally had to upgrade, and now I am hit.
My printer is an epson R2400. Prints are as expected from a MacBook Pro that has never been upgraded from one system to the next, and also from a test installation of 10.4.11 on a brand new hard drive. It is only the upgraded (via archive and install) system that I can't get straightened out.
Chromix is making some custom profiles for me, and they had me go into colorsync utility to assign Generic RGB as the default profile for the printer. Problem is, the R2400 is listed 3 separate times in Colorsync utility, although it is only listed once in Printer SetUp utility and in System preferences under printing and fax.
Resetting the printing system doesn't clear this up, nor does uninstalling the driver and reinstalling.
I don't know for certain that this is the cause of my color management issues, but it certainly does not seem desirable. The systems on the machines that print correctly do not have duplicate instances of the printer listed in colorsync utility.
I am not able to set a default printer in Colorsync utility, presumably due to this problem. This is the only printer installed, and it is listed as default the other 2 places.
An archive and install did not fix the issue.
Any idea on how to clear this up short of totally starting over with a fresh installation, from scratch? the printers are listed with unique ID's in Colorsync utility, but I don't know how to run anything down from there.

I am not printing with colorsync color management, rather I am using colorsync *utilty* to correct a misapplied color profile in the driver.
This is documented a few places on the web, and it is Chromix's answer to incorrect prints from ALL the Adobe applications... in my case, PS 7, and ALL CS2 and CS3 suite applications. Very specifically, the print error happens with Photoshop 7 and CS2 and CS3, and Illustrator CS2 and CS3, and InDesign CS2 and CS3. The solutions it to be certain that in your print stream, when you check the details of how the print is being sent, that colorsync is set to standard conversion, generic RGB profile, no quartz filter. The way you typically mange this, if the wrong RGB profile is showing, is by resetting it in ColorSync utility.
I am printing a a profiling target, so I am not setting up a conversion from source space to print space. I am sending with color management off.
The reason I didn't mention my workflow settings is that is not the question. The question is how to get rid of the spare printer instances in colorsync utility, becasue i think they are hosing my otherwise correct color settings.
My target print looks like it is being color managed incorrectly, even though all color management is disabled in the Photoshop print dialog and in the print driver. The colors are the correct hue, but they are much too dark.
Chromix has a little application you can print the targets from. Photoshop (all versions) on the system with the colorSync utility problem prints the target too dark compared to the Chromix utility, or to Photoshop on two other systems I have with no colorSync utility duplication of printers.
Again, I am not looking for help with my printing workflow, because that is not the question or problem. My prints are correct on other systems with the same version of software and the same print settings, as long as I can make the needed correction in Colorsync utility first.
the question is how to reset colorsync utility, or otherwise troubleshoot the erroneous feedback it is giving me..

How can I print with ColorSync Utility

When I receive an attachment via entourage,it automatically opens in ColorSync utility. I want to print so I go to the 'File' menu and I cannot print because the print option is "greyed out". Can anyone tell me how I can resolve this so that I can print e-mail attachments?

1. Drag it to the Preview Icon
To make Preview the Default for jpegs:
Select a Jpeg in the Finder
Go file -> Get Info
Look for the 'Open With' pane in the resultng Window. Select Preview from the DropDown and click the Change All button
Regards
TD

How does one add a device to ColorSync Utility

I was wondering how one can add a "device" to ColorSync Utility? It seems all my "other" devices are showing up, such as my printer (which also has scanning capabilities). However, I'm not seeing my i800 Microtek Scanner, "renamed" as ScanPotter anywhere, yet IS in my "Utilities" folder, and no doubt this could be the reason why everytime I scan a photo from a print, negative or slide I'm getting annoying "pop-ups" to install Xll Quartz, which IS already installed. Also I plan to install the new PhotoElements 11...am I going to have a problem with that as well

Maybe it needs to be in Applications?

Colorsync Utility. Whenever I click on Devices or Filters, it hangs and I have to force quit. Any ideas as to how to fix this?

I'm having an issue with Colorsync Utility. When I open the utility I can access Profile First Aid, Profiles and the Calculator but whenever I click on Devices or Filters, it hangs and I have to force quit. I recently re-profiled my NEC monitor using xRite i1Profiler Pro and saved the ICC profile as "version 4". When I went to use the Nik's ColorEfex Pro 4 plug-in, in Adobe Photodhop CS5.1 (Creative Suite 5.5), I got a cyan cast across all my images. Nik said it had to do with a corrupt ICC profile but when I ran Profile First Aid, the only profile that came up as needing repair ( and couldn't) was EW-sRGB. I reprofiled the monitor only this time I saved it as "version 2", and the plug-in worked fine. What surprises me is that Colorsync Utilty always used to work without issue, and I never seemed to have a problem creatinga and saving ICC profiles using version 4. Any ideas as to what is causing this problem and how to fix this?
Thanks.
James

I updated my software, and deleted my history/cache. Also, when I try to use Preview, it says that it was forced to quit while restoring windows, so when I click restore windows nothing happens. I can't view anything either. The only thing I can think that may have caused these problems is I tried to shut down and had to force it to by holding the power button. I rarely shut it off.

Opening pdf files in preview,mine will only open in colorsync utility. help

My macbook operating on Mac os 10.5.6 when opening pdf files it will only open them with colorsync utility and I can't alter the files (rotate/zoom etc) like I can when I can open it with Preview on my iMac desktop... I don't seem to have preview on my macbook. Is there anywhere I can download it from or somehow transfer it from my iMac to my macbook?? Maybe I just can't find it properly?? Help!

do a spotlight search for Preview. can you find it? it should be in the main Applications folder at the top level of the hard drive. if you can't find it you can reinstall it from the leopard install DVD using Pacifist
http://www.charlessoft.com/

Tag 'dmnd': Tag size is not correct msg in Colorsync Utility

When I press the verify button in the Colorsync Utility, I get the path to my ICC Profile
/Library/Printers/Epson/InkjetPrinter/ICCProfiles/Pro38.profiles/Contents/Resour ces/Pro3800 3800C 3850 standard.icc
and then Tag 'dmnd':Tag size is not correct on the next line.
After that, Verify done - found 1 bad profile.
The printer works ok in Photoshop, though prints maybe come out a bit on the dark side as compared to my calibrated screen.
Is this something to be concerened about, and if so, what exactly is the course of action I should take?
Thanks

Sorry, I thought you asked what course of action to take.
It means the data for that "tag" in the profile is not the size expected - I know, that's obvious too. The 'dmnd' tag contains the manufacturer's description.
http://www.oyranos.org/wiki/index.php?title=DeviceSettings_in_ICC0.2
You could try opening it in ColorSync Utility and editing the tag.

Colorsync Utility: How to delete no longer used printers?

I have a problem with the colorsync utility. In the device window some printers appear which are already deleated. I would like to only have the active printers shown but don´t know how to delete the printers within the device menu. I tried to put the colorsync utility preference file into the trash but this was not successfull. Any idea how to delete the devices I no longer use?
Thanks for your help
Wolfgang
G5 2x2.5 GHz, Powerbook G4 867 MHz Mac OS X (10.4.4)

I don't know for sure but I would think they would be located in the hard drive/library/colorsync/profiles folder.
I don't generally advocate moving things out of any of the system folders but I think that is where they are. If you want to move them out of there do so at your own risk

Colorsync utility

I am having problems with color casts when printing from Aperture so I was going to try to use the colorsync utility to fix the problem. I have never used it before and I am suprised that multiple printers are being listed. When I uninstalled my epson 2200 one of them was removed but I still have 3 more epson 2200 ploy and epson 1280 listed. Presently there are no printers installed or connect to the computer. Is there a way to clean up the list.
Also where do you put the print/paper icc profiles. I am thinking that it just may be grabbing the wrong profile based on a path.
Thanks--Ed

Profiles live in Library>ColorSync>Profiles. You can remove the ones that you do not need. There may be aliases there, but they will lead to where the originals are.

Quality degradation with the ColorSync Utility?

Is there any quality loss when one uses Apple's ColorSync Utility to match a new sRGB profile to an image previously colored with Adobe RGB? Since it's having to re-compress the image, is there a risk of significant quality degradation?
Here's why I'm asking: iPhoto is great with editing RAW photographs. But when it comes time for a JPEG export, I can only get it to export with Adobe RGB. So in order to get sRGB, I have to use the ColorSync Utility. Having to save a JPEG twice makes me slightly uncomfortable from a compression point of view.

Got it!
I removed the following files from my /Applications/Utilities/ColorSync Utility.app/Contents/Resources folder:
AnyTag.cstag
ChadTag.cstag
ColorSyncUtils.icns
CurvTag.cstag
DescTag.cstag
DtimTag.cstag
Header.cstag
MbaTag.cstag
MftTag.cstag
MlucTag.cstag
MmodTag.cstag
NdinTag.cstag
NumsTag.cstag
ParaTag.cstag
Preferences.csutil
TextTag.cstag
VcgtTag.cstag
XYZTag.cstag
bmp.icns
fpx.icns
pntg.icns
qtif.icns
sgi.icns
tga.icns
They all had last-modified dates sometime in 2004 and none of them were present in the ColorSync Utility.app package on the install CD, according to Pacifist (http://www.charlessoft.com/).

ColorSync Utility: Missing "Make Default" in Displays. Bug or feature?

Hi there,
setting up my new MacBook Pro with Snow Leopard, I noticed that I can’t select my Default color management screen anymore in ColorSync Utility. There’s still the “Default” column in the Devices section, and the MBP’s display is marked as default, but for obvious reasons I’d like to have my better screen to be the default ColorSync screen.
But there’s no way to change this.
Hence the question – did the button go missing (i.e. a bug), or isn’t it necessary anymore as, perhaps, the new ColorSync CMM finally can fully manage multiple displays connected to one Mac?
Feedback much appreciated. I’m working on another article about color management with Macs, and this is sort of important information.

I have just tested this on a different webpage, and PHPSESSID shows up there. This seems to contradict my hypothesis of XSS prevention.

Colorsync Utility crashes on Intel Macs using ICC v4 profiles

There is an apparently known bug whereby opening ICC v4 profiles on an Intel Mac in Colorsync Utility, and picking on a device-to-lab tag (A2Bx), the application crashes. This did not happen on my Powerbook, so apparently it's only on Intel Macs. It also doesn't crash when doing this with ICC v2 profiles on my Intel. So, the combination of Intel and ICC v4 is the problem.
Has anyone encountered this? Any help would be appreciated, since this bug is also disabling a color management application that I need to use.

Hi Jester,
Two things,
The Quicktime setting is going to need to be 1.5Mb as iChat dislike LAN/Intranet
iGlasses is not going to work with iChat unless you ask iChat to run with Rosetta.
Go to the File Menu and use the Open With Rosetta option.
This is because you may not have the iGlasses as a Unviversal coded Add-on. See the third bullet point.
Update it if required. Delete it for Trouble shooting (Crashed Thread 11)
The paths are in this bit
0x5c9000 - 0x5cafff com.ecamm.pluginloader Ecamm Plugin Loader v1.0.3 (1.0.3) /Library/InputManagers/Ecamm/Ecamm Plugin Loader.bundle/Contents/MacOS/Ecamm Plugin Loader
0x5cf000 - 0x5e4fff com.ecamm.iglasses v1.3.2 (1.3.2) /Library/InputManagers/Ecamm/Plugins/iGlasses.plugin/Contents/MacOS/iGlasses
0x5fd000 - 0x5fefff com.li.hao.saftloader 1.3.0 (423) /Library/InputManagers/Saft/SaftLoader.bundle/Contents/MacOS/SaftLoader
What is Saft or SaftLoader ??
3:27 PM Wednesday; March 15, 2006

Can't print pdf attachment- ColorSync Utility

Recently something "new" has developed with my laptop. I don't know if it was part of an update, but now when i get an email with a pdf document attachment, I can open it and look at it, and I see now a "format" display that is ColorSync Utility, but there is no obvious way to print it out.
What gives?

I called Apple for help.
To make a long story short, it appears that a week or two ago, when I was sending a lot of old files I no longer needed to the trash, that somehow "preview" got sent there too.
Once the technician (she had to call in the tech manager who got on the phone) figured out things, I had to drag "preview" out of the trash and put it back into applications. ONce that happened, things worked normally.
What was happening is that normally the pdf would open in preview, but without preview there in applications, the computer selected ColorSync Utility to open it. CSU does not have a way to print, hence the problem.

ColorSync Utility 4.8.0 Upgrade to 4.10.0 "iBoostUp" is it worth it?

Similar Messages

Maybe you are looking for