Colour Calibration for 24" iMac and setting up an ICC profile

Hi,
Can anyone recommend a way for calibrating the display of a 24" iMac (not too expensive)? I will mainly be using Photoshop, Aperture and web browsing (I do not need for business, but like to have the best set up possible).
Also, on a similar note, can anyone suggest a cost effective way of getting an ICC profile for use with Photoshop (CS2) and Aperture for an HP Photosmart 3210 please?
Thanks

Hi Kevin
As your based in the UK feel free to contact me with regards to obtaining display profiles for your 24" iMac, and possibly output profiles for your printer.
We are hoping to add a 24" iMac (or should that be BigMac to our studio as a training machine and backup to our other Macs in the very near future. As soon as we get our machine it will only be a day or so before I get it profile and I would be quite willing to email you a copy of our screen profile free of charge for you to test, this should get you pretty good results.
As part of our business we carry out colour management training and that obviously includes creating colour profiles. We use a Gretag i1 Pro to calibrate and profile our screens to a very high level so I think it may be worth you giving me a call soon. Feel free to call me on 01773 717446 or email me at [email protected]
G5 Dual 2.0, PB15"DL, Quicksilver 733   Mac OS X (10.4.4)  

Similar Messages

  • Having just bought an iMac and set every thing up I have found that my IPad seems to run very slow. I have also just updated the IPad to OS 5.1 .Are these two things connected or is there a problem with the IPad

    Having just bought an iMac and set every thing up I have found that my IPad seems to run very slow. I have also just updated the IPad to OS 5.1 .Are these two things connected or is there a problem with the IPad

    Using the Mac with your iPad has nothing to do with the fact that the iPad is running slow. There could be any number of reasons why the iPad is now running slow.
    Have you tried a reset on the iPad?
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • HT204053 I have a problem. I bought Pages and Numbers for my iMac and so far everything was OK.  Suddenly i have a problem with connection to iCloud. Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded in iCloud.

    I have a problem.
    I bought Pages and Numbers for my iMac and so far everything was OK.
    Suddenly i have a problem with connection to iCloud.
    Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded to iCloud. There is a sign  (small shape of iCloud), that they are waiting to be uploaded to iCloud.
    I think the iCloud is OK.
    i can see and manage documents in iCloud. i can create them on iPad and  see them and delete them in iCloud.
    But not on iMac.
    i dont know what has happened and I am not abble to find the solution. It was OK till some days ago….

    I have a similar problem! Everything stopped working after upgrading to Mac OS 10.8.4 through the App Store. Help!

  • Can I use my creative cloud account at the same time for my iMac and my MacBook?

    Can I use my creative cloud account at the same time for my iMac and my MacBook?

    Thank you Sheena!!
    Guy
    Op 2-jan.-2015, om 12:16 heeft Sheena Kaul <[email protected]> het volgende geschreven:
    Can I use my creative cloud account at the same time for my iMac and my MacBook?
    created by Sheena Kaul <https://forums.adobe.com/people/Sheena+Kaul> in Adobe Creative Cloud - View the full discussion <https://forums.adobe.com/message/7059158#7059158>
    Hi Guy Heyligen,
    Absolutely. You can use the creative cloud account on two machines.
    You may also refer to the link below:
    Creative Cloud Help | Creative Cloud / Common Questions <http://helpx.adobe.com/creative-cloud/faq.html>
    Regards,
    Sheena
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7059158#7059158 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7059158#7059158
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Adobe Creative Cloud by email <mailto:[email protected].com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 70>
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

  • Setting Up IIS 5.1 for ColdFusion 9 and Setting Up ColdFusion 9 for IIS 5.1

    Can someone point me in the direction of instructions for setting up IIS 5.1 for ColdFusion 9 and setting up ColdFusion 9 for IIS 5.1

    I Googled "coldfusion 9 iis 5" and the first result is a detailed set of instructions on how to do it.

  • Formula for comparing string and setting text object to visable?

    I have a report that is pulling data from a database and listing multiple records, one on each page. I am wanting to compare a value that is stored in a database field for each record and setting a text object visible based on the text.
    I'm very new to Crystal Reports and not quite sure on the type of syntax needed to perform what I'd like below and can't find much information online about it. The type of formula I want would be something like:
    if (vDetailReport.BoardAction = "Board Action w/Committee Action")
        txtBox1.Visible = True;
    else if (vDetailReport.BoardAction = "Board Action w/o Committee Action")
        txtBox2.Visible = True;
    else if (vDetailReport.BoardAction = "Committee Discussion Only")
        txtBo3.Visible = True;
    etc.
    The txtBoxes are text objects with an "X" as the string that are inside the boxes to appear as a checkbox. I'm wanting this to work for every record in the report.
    Example:
    http://img.photobucket.com/albums/v57/kaje103/boardaction.png
    Any help would be much appreciated!

    I believe that what you want to do here is place an text item consisting of an "X" at each location you want. Then select "Format Text", go to the Common Tab, and click on the button next to "Suppress". That allows you to put in a formula such as:
    {vDetailReport.BoardAction} &lt;> "Board Action w/Committee Action"
    that will suppress the X unless it's the value you want checked.

  • Is there a WSOP download for the iMac and if so where do I get it?

    Is there a WSOP download for the imac and if so where can I get it?

    WSOP meaning what, exactly? World Series of Poker? If that's what you mean, they appear to have applications only for mobile devices or Windows, assuming you want to play.
    Regards.

  • HT1270 Used the right memory, both for my iMac and MacBook Pro, iMac worked, MacBook Pro didn't start (warning tone). Any idea?

    Used the right memory according to page, both for my iMac and MacBook Pro, iMac worked, MacBook Pro didn't start (warning tone).
    Any idea?

    I suggest you buy your memory from OWC or DataMem. Both guarantee the memory works or will replace it if it does not, no questions asked, within their 30 day return period. I've used both for over 20 years, and no complaints.

  • Trying to download a widget for my iMac and getting "mobile me is closed"???

    Trying to download a widget for my iMac and getting "mobile me is closed"???

    Hello Roger,
    You seem to have your finger on the pulse!
    Does this mean that I can't put a map on my iweb page now either?
    I've just created a site (first time!) and published it and now I can't add the finer details, a map is required so people can find us, what do I do??
    HELP
    thanks in advance
    Sam

  • I have purchased Final Cut Pro for my imac and now want to put it onto my macbook air so I can use it when away from my desk. How can I do this

    I have purchased Final Cut Pro for my imac and now want to put it onto my macbook air so I can use it when away from my desk. How can I do this

    I took away my backup disk with me so just took it from there excellent. I am back home at present working on my imac. When I go to use my macbook air on these projects (when away on boat) is it easiest to simply copy the Project and Events folders in total from my imac onto the other machine and do the same upon my return in reverse? I don't use icloud

  • I have purchased Pages, Numbers and Keynote for my iMac and wish to transfer them to my iPad 3. Is this possible and if so how do I do it?

    I have purchased Pages, Numbers and Keynote for my iMac and wish to transfer them to my iPad 3. Is this possible and if so how do I do it?

    If you want to have Pages, Numbers and Keynote on the iPad then you will need to buy the app versions from the iTunes app store - the Mac version (OS X) is not compatible with the iPad (iOS), they are different operating systems.

  • HT4314 I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

    I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

    Hi Jamesdwills,
    Welcome to the Support Communities!
    If you are using the same Apple ID on both devices, the Game Center profile should be the same.
    Check out this information from the iPad User Guide.  Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
    Using Game Center
    http://support.apple.com/kb/ht4314
    Game Center settings - iPad User Guide
    http://help.apple.com/ipad/7/#/iPad9a13d039
    Game Center settings
    Go to Settings > Game Center, where you can:
    Sign out (tap your Apple ID)
    Allow invites
    Let nearby players find you
    Edit your Game Center profile (tap your nickname)
    Get friend recommendations from Contacts or Facebook
    Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
    Change restrictions for Game Center. Go to Settings > General > Restrictions.
    Cheers,
    - Judy

  • I'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games.

    i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!

    I have exactly the same problem.
    I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
    Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
    Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
    The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
    What the **** Is The Microsoft Deal with all of this!?!?
    PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
    If anyone has a link, it would be appreciated.
    Message was edited by: nostrawaggus

  • Filled colour as a variable? and setting layer to not block the content underneath?

    I wonder if it's possible to take the filled colour (filled with  myColor.setRGB(0x993366); like a colouring style) and set the colour filled to be a value of a variable in an if statement? if yes, anyone know how to do it?
    and is it possible to set a layer's content so that it does not block any button underneath it? I'm trying use that movie as a mask but I do not want it to block any activity underneath it. or is it better to use the myMovieClip .setMask ( maskMovieClip )(I don't really know how to use this) I only need the masking to appear when a specific button is pressed. Hope my english isn't too confusing. Thanks.

    Yes. If you check the documentation for the Color class you will see there is a getRGB() method which returns the value set by the setRGB() method. However it doesn't tell you what color something is, it tells you what color transform has been assigned to that object. So if you make a movie of a red square and you do this:
    var myColor:Color=new Color(myClip);
    trace(myColor.getRGB()); // traces "0"
    Which could either mean it has been tranformed to black or that it has no transform (which is the case here.)
    What you are seems more complicated than it probably needs to be. What are you actually trying to do? How are these clips having their transforms assigned? What does it mean that they are a certain color.
    As for the layer thing. I have no idea what you are talking about.
    BTW, here is something you didn't ask for. Using the on(event) type handler coding went out of style with the introduction of Flash 6 in 2002. It is a very inefficient way to code and is very difficult to maintian because you have to look through all your items to find the code. Most folks these days put the code on the timeline where it is all in one place and easier to maintain. Here is a great article about it:
    http://www.quip.net/blog/2006/flash/museum-pieces-on-and-onclipevent

  • My Time Machine Strategy for both iMac and MacBook...

    1) Get 1TB external drive, format as HFS+ (including the Gizmodo hint about reformatting Fat32 drives properly by setting GUID Partition table)
    2) Attach external drive to MacBook directly-run Time Machine overnight for initial full backup
    3) Attach external drive to iMac directly-run Time Machine overnight for initial full backup
    4) Attach external drive to my Mac Mini (running Leopard)-don't run Time Machine
    5) Point the iMac and MacBook to the networked drive for future incremental Time Machine backups, by mounting the external drive permanently attached now to the Mac Mini as a shared drive.
    This way, I get the tedious original backup thru direct connection-native Firewire speeds, then rely on the networked wired (iMac) and networked wireless (MacBook) connections for the incremental backups (which, given our usage, isn't that major on an hourly or daily basis)
    Anyone tried something like this successfully?

    If  you have tried the fixes in Pondini's Time Machine Troublshooting, specifically #C12 and nothing helps, then it is time to let one of the genius types at an Apple Store take a look.
    http://pondini.org/TM/Troubleshooting.html
    If you cannot take the Time Capsule to an Apple Store, contact Apple Support directly.
    http://www.apple.com/support/contact/

Maybe you are looking for