Colour cells in ALV OOPS

Hi Experts,
Can any one solve my problem.
I have displayed (grid display) using ALV OOPS using method (CL_GUI_ALV_GRID=>SET_TABLE_FOR_FIRST_DISPLAY)
But I want colors should come on the list. Colors should be displayed Cell wise.
Suppose for example in the first row fifth column is RED, Then second row fifth column should be other color.
How to do this.
Can any one solve this problem.
Thanks in advance.
Regards,
Kumar

hi,
you can change the properties of the cell ie colors.
Coloring Individual Cells
This is the last point about coloring procedures for the ALV Grid. The procedure is similar to coloring an entire row. However, since an individual cell can be addressed with two parameters we will need something more. What is meant by u201Cmoreu201D is a table type structure to be included into the structure of the list data table. It seems strange, because including it will make our list data structure deep. But anyhow ALV Grid control handles this.
The structure that should be included must be of type u201CLVC_T_SCOLu201D. If you want to color the entire row, this inner table should contain only one row with field u201Cfnameu201D is set to space, some color value at field u201Ccolu201D, u201C0u201D or u201C1u201D at fields u201Cintu201D (intensified) and u201Cinvu201D (inverse).
If you want to color individual cells, then for each cell column, append a line to this inner table which also contains the column name at field u201Cfnameu201D. It is obvious that you can color an entire column by filling this inner table with a row for that column for each row in the list data table. But, it is also obvious that, this will be more time consuming than the method at section C.6.1.
Again key field coloring will override your settings. Thatu2019s why, we have another field in this inner table called u201Cnokeycolu201D. For each field represented in the inner table, set this field to u2018Xu2019 to prevent overriding of key color settings.
DATA BEGIN OF gt_list OCCURS 0
INCLUDE STRUCTURE SFLIGHT .
DATA rowcolor(4) TYPE c .
DATA cellcolors TYPE lvc_t_scol
DATA END OF gt_list .
DATA ls_cellcolor TYPE lvc_s_scol .
READ TABLE gt_list INDEX 5 .
ls_cellcolor-fname = 'SEATSOCC' .
ls_cellcolor-color-col = '7' .
ls_cellcolor-color-int = '1' .
APPEND ls_cellcolor TO gt_list-cellcolors .
MODIFY gt_list INDEX 5 .
regards,
Veeresh

Similar Messages

Changing colour based on cells for ALV in Web Dynpro ABAP

Hi,
I have a requirement where I need to change the font color for some cells of ALV in Web Dynpro ABAP. I am able to change the font color for whole row or whole column but need to know how to change it based on cells.
My output should be something like the picture attached to this discussion. The coloumns/cells where I need the font colour can change for different rows, based on some internal condition.
Please let me know how to achieve this...... Thank you.
- Divya Posanpally

Hi Divya,
Your requirement can be achieved as below
Create an attribute for each column of alv i.e. COLOR_F1, COLOR_F2, COLOR_F3...... COLOR_F10 of type WDY_UIE_LIBRARY_ENUM_TYPE in the context node which holds the color value
Now while configuring ALV, set the field name of semantic color for each column as below
               data lv_color_fld_name type string.
               data lo_text_view type ref to cl_salv_wd_uie_text_view.
          loop at lt_columns into ls_column.
          concatenate 'COLOR' ls_column-id into lv_color_fld_name separated by '_'.
          lo_text_view ?= ls_column-r_column->get_cell_editor( ).
          if lo_text_view is bound.
          lo_text_view->SET_SEMANTIC_COLOR_FIELDNAME( value = lv_color_fld_name ).
          endif.
          endloop.
Set the color based on the condition
         loop at lt_data into ls_data.
                    if ..... "your condition here.
                    ls_data-color_f1 = cl_wd_text_view=>e_semantic_color-NEGATIVE.
                    ls_data-color_f2 = cl_wd_text_view=>e_semantic_color-POSITIVE.
                    elseif...... " another condition
                    endif.
          endloop.
Note: You can optimize the code as per your requirement
Hope this helps you.
Regards,
Rama

How to colour a cell in alv's

hi experts ,
any one tell me how to colour a cell in alve. give me some sample code.
reward points.......

Hi
Fareeda
this is w2ht the code example u asked
if u found it helpfull plzz reward
TABLES:LFA1.
SELECT-OPTIONS:LIFNR FOR LFA1-LIFNR.
DATA:BEGIN OF ITAB OCCURS 0,
LIFNR LIKE LFA1-LIFNR,
NAME1 LIKE LFA1-NAME1,
LAND1 LIKE LFA1-LAND1,
ORT01 LIKE LFA1-ORT01,
REGIO LIKE LFA1-REGIO,
SORTL LIKE LFA1-SORTL,
CFIELD(4) TYPE C,
END OF ITAB.
data:col(4).
data:num value '1'.
SELECT * FROM LFA1 INTO CORRESPONDING FIELDS OF TABLE ITAB WHERE LIFNR
IN LIFNR.
LOOP AT ITAB.
concatenate 'C' num '10' into col .
ITAB-CFIELD = col.
num = num + 1.
if num = '8'.
num = '1'.
endif.
MODIFY ITAB.
ENDLOOP.
TYPE-POOLS:SLIS.
DATA:FCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA:LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA:SORT TYPE slis_t_sortinfo_alv WITH HEADER LINE.
DATA:EVE TYPE SLIS_T_EVENT WITH HEADER LINE.
LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
LAYOUT-WINDOW_TITLEBAR = 'VENDORS DETAILS SCREEN'.
LAYOUT-EDIT = 'X'.
LAYOUT-info_fieldname = 'CFIELD'.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = SY-REPID
I_INTERNAL_TABNAME = 'ITAB'
I_INCLNAME = SY-REPID
CHANGING
CT_FIELDCAT = FCAT.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FCAT
TABLES
T_OUTTAB = ITAB.
this is for coloring cols
REPORT ZBHCOLOR_COLS.
TABLES:LFA1.
SELECT-OPTIONS:C_LIFNR FOR LFA1-LIFNR. " FOR GRID ONLY
PARAMETERS:LIST RADIOBUTTON GROUP ALV DEFAULT 'X',
GRID RADIOBUTTON GROUP ALV.
DATA:BEGIN OF ITAB OCCURS 0,
LIFNR LIKE LFA1-LIFNR,
NAME1 LIKE LFA1-NAME1,
LAND1 LIKE LFA1-LAND1,
ORT01 LIKE LFA1-ORT01,
SORTL LIKE LFA1-SORTL,
REGIO LIKE LFA1-REGIO,
COL TYPE LVC_T_SCOL,
END OF ITAB.
DATA:COLR TYPE LVC_S_SCOL.
SELECT * FROM LFA1 INTO CORRESPONDING FIELDS OF TABLE ITAB.
LOOP AT ITAB.
IF ITAB-LIFNR IN C_LIFNR.
COLR-FNAME = 'NAME1'.
COLR-COLOR-COL = '5'.
COLR-COLOR-INT = '1'.
COLR-COLOR-INV = '0'.
COLR-NOKEYCOL = 'X'.
APPEND COLR TO ITAB-COL.
COLR-FNAME = 'LIFNR'.
APPEND COLR TO ITAB-COL.
MODIFY ITAB.
ENDIF.
ENDLOOP.
TYPE-POOLS:SLIS.
DATA:FCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA:LAYOUT TYPE SLIS_LAYOUT_ALV.
LAYOUT-ZEBRA = 'X'.
layout-coltab_fieldname = 'COL'.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = SY-REPID
I_INTERNAL_TABNAME = 'ITAB'
I_INCLNAME = SY-REPID
CHANGING
CT_FIELDCAT = FCAT.
IF LIST = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FCAT
TABLES
T_OUTTAB = ITAB.
ELSEIF GRID = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FCAT
TABLES
T_OUTTAB = ITAB.
ENDIF.
Plzzz dont forget to reward

ALV OOP- Catching the event when the user clicks a cell

Hi Experts,
i have 2 alvs to display using custom containers, now the problem is that i need to make some lines uneditable and some lines editable. On making this i find that ALV does not offer this functionality of selective editable rows, right? I offered a workaround by just popping an error message if a user clicks a row which suppose to be disabled/uneditable. My problem is that how can i catch the single click event in ALV using OOP?
Thanks to replies and points will be given...

hi,
hope this helps.
creating Editable Cells in ALV
Making a column editable in ALV:
IT_FIELDCAT is an internal table which has the structure of the data to be displayed. Each row in this internal table creates a column in ALV. The fieldcat structure has an optional field u2018EDITu2019 which is not required to be passed all the time. By default the column is non-editable. If the value of the field EDIT is u2018Xu2019, that column becomes editable in the display.
Example:
wa_fieldcat-fieldname = 'CHECK'.
wa_fieldcat-edit      = 'X'.
wa_fieldcat-coltext   = 'Delete'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
The column DELETE in the ALV display is editable. The corresponding output internal table field name is CHECK.
Making individual cells editable or non-editable:
1.     Include an internal table of type lvc_t_styl in the output internal table (as a field) of the ALV. This inner table is like other output fields of the internal table.
Example:
TYPES: BEGIN OF tt_project,
            check TYPE c,
            status(132) TYPE c,
            it_styletab TYPE lvc_t_styl.
TYPES: END OF tt_project.
2.     This inner internal table controls the style of each cell in the row of the output internal table.
3.     Same like other fields of the output internal table, this style table (inner internal table) should be filled for each row of the table.
4.     The structure of the output internal table.
CHECK     STATUS     IT_STYLETAB
X     ABC     Fieldname     Style
CHECK     Non-editable(MC_STYLE_DISABLED)
STATUS     editable(MC_STYLE_ENABLED)
     CDF     Fieldname     Style
     Non-editable(MC_STYLE_DISABLED)
      wa_stylerow-fieldname = u2018CHECKu2019. -
> Optional
      wa_stylerow-style = cl_gui_alv_grid=>mc_style_disabled. (Non-editable)
      or
      wa_stylerow-style = cl_gui_alv_grid=>mc_style_enabled. (Editable)
      Append wa_stylerow to wa_project-it_styletab.
     Wa_stylerow is a work area for IT_STYLETAB.
       Wa_project is work area for output internal table.
5.     Refresh the inner internal table for each row in outer internal table.
6.     If the fieldname is not provided for the style internal table, the entire row becomes editable or non-editable.
7.     This provides the ability to enable input for a cell dynamically.
8.     The layout of the ALV Grid should also be changed in order to achieve this. The layout has a parameter, u2018STYLENAMEu2019. The name of the style internal table should be given as the value for this field. The layout should be passed in SET_TABLE_FOR_FIRST_DISPLAY.
     Example:
     wa_layout-stylefname = 'IT_STYLETAB'.
reward if useful.
regards
srishti

Event handling in alv oops With buttons

Hi Experts
         I have some doubt in ALV OOPS using Events. Could any one please tell me the procedure to how to handle events in oops ( Like interactive reports using events ).
                                 Thank you
Satyendra.

Hello Satyendra
The following sample report shows you how to handle the event HOTSPOT_CLICK and BUTTON_CLICK.
DATA: gd_okcode TYPE ui_func,
gt_fcat TYPE lvc_t_fcat,
go_docking TYPE REF TO cl_gui_docking_container,
go_grid1 TYPE REF TO cl_gui_alv_grid.
DATA:   gt_knb1 TYPE STANDARD TABLE OF knb1.
PARAMETERS: p_bukrs TYPE bukrs DEFAULT '2000' OBLIGATORY.
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
    CLASS-METHODS:
      handle_hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
        IMPORTING
          e_row_id
          e_column_id
          es_row_no
          sender, " grid instance that raised the event
      handle_button_click FOR EVENT button_click OF cl_gui_alv_grid
        IMPORTING
          es_col_id
          es_row_no
          sender.
ENDCLASS.                    "lcl_eventhandler DEFINITION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_hotspot_click.
*   define local data
    DATA:
      ls_knb1     TYPE knb1,
      ls_col_id   TYPE lvc_s_col.
    READ TABLE gt_knb1 INTO ls_knb1 INDEX e_row_id-index.
    CHECK ( ls_knb1-kunnr IS NOT INITIAL ).
    CASE e_column_id-fieldname.
      WHEN 'KUNNR'.
        SET PARAMETER ID 'KUN' FIELD ls_knb1-kunnr.
        SET PARAMETER ID 'BUK' FIELD ls_knb1-bukrs.
        CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
      WHEN 'ERNAM'.*
         SET PARAMETER ID 'USR' FIELD ls_knb1-ernam.
        CALL TRANSACTION 'SU01' AND SKIP FIRST SCREEN.
      WHEN OTHERS.
    ENDCASE.
*   Set active cell to field BUKRS otherwise the focus is still on
*   field KUNNR which will always raise event HOTSPOT_CLICK
    ls_col_id-fieldname = 'BUKRS'.
    CALL METHOD go_grid1->set_current_cell_via_id
      EXPORTING
        is_row_id    = e_row_id
        is_column_id = ls_col_id.
ENDMETHOD.                    "handle_hotspot_click
METHOD handle_button_click.
*   define local data
    DATA:
      ls_knb1     TYPE knb1.
    READ TABLE gt_knb1 INTO ls_knb1 INDEX es_row_no-row_id.
    CHECK ( ls_knb1-kunnr IS NOT INITIAL ).
    SET PARAMETER ID 'KUN' FIELD ls_knb1-kunnr.
    SET PARAMETER ID 'BUK' FIELD ls_knb1-bukrs.
    CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
ENDMETHOD.                    "handle_button_click
ENDCLASS.                    "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT        * FROM knb1 INTO TABLE gt_knb1
         WHERE bukrs = p_bukrs
* Create docking container
CREATE OBJECT go_docking
    EXPORTING
      parent                      = cl_gui_container=>screen0
      ratio                       = 90
    EXCEPTIONS
      OTHERS                      = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create ALV grid
CREATE OBJECT go_grid1
    EXPORTING
      i_parent          = go_docking
    EXCEPTIONS
      OTHERS            = 5.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Set event handler
SET HANDLER:
    lcl_eventhandler=>handle_hotspot_click FOR go_grid1,
    lcl_eventhandler=>handle_button_click FOR go_grid1.
* Build fieldcatalog and set hotspot for field KUNNR
PERFORM build_fieldcatalog_knb1.
* Display data
CALL METHOD go_grid1->set_table_for_first_display
    CHANGING
      it_outtab       = gt_knb1
      it_fieldcatalog = gt_fcat
    EXCEPTIONS
      OTHERS          = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro
CALL METHOD go_docking->link
    EXPORTING
      repid                       = syst-repid
      dynnr                       = '0100'
*      CONTAINER                   =
    EXCEPTIONS
      OTHERS                      = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* ok-code field = GD_OKCODE
CALL SCREEN '0100'.
END-OF-SELECTION.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT
MODULE user_command_0100 INPUT.
CASE gd_okcode.
    WHEN 'BACK' OR
         'END' OR
         'CANC'.
      SET SCREEN 0. LEAVE SCREEN.
    WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
FORM build_fieldcatalog_knb1 .
* define local data
DATA:
    ls_fcat        TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
*     I_BUFFER_ACTIVE              =
      i_structure_name             = 'KNB1'
*     I_CLIENT_NEVER_DISPLAY       = 'X'
*     I_BYPASSING_BUFFER           =
*     I_INTERNAL_TABNAME           =
    CHANGING
      ct_fieldcat                  = gt_fcat
    EXCEPTIONS
      inconsistent_interface       = 1
      program_error                = 2
      OTHERS                       = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT gt_fcat INTO ls_fcat
          WHERE ( fieldname = 'KUNNR' OR
                  fieldname = 'ERNAM' OR
                  fieldname = 'BUKRS' ).
    IF ( ls_fcat-fieldname = 'BUKRS' ).
      ls_fcat-style = cl_gui_alv_grid=>mc_style_button. " column appears as button
    ELSE.
      ls_fcat-hotspot = abap_true.
    ENDIF.
    MODIFY gt_fcat FROM ls_fcat.
ENDLOOP.
ENDFORM.                    " BUILD_FIELDCATALOG_KNB1
Regards
Uwe

Colour display in ALV

Guys,
I want to display the colour in the ALV output for some records.
please help.
reg,
vijay

Hi vijay,
1. Not only the full row color,
we can also manipulate the color in each cell.
2.
IMPORTANT THINGS
a. Extra field in internal table
clr TYPE slis_t_specialcol_alv,
(this field will contain the colour codes)
b. assign fieldname to alv layout
alvly-coltab_fieldname = 'CLR'
c. work area for colour
DATA : clrwa TYPE slis_specialcol_alv.
d. Populating the color
Once again
Loop at ITAB.
*********logic
if itab-field < 0 "---negative
clrwa-fieldname = 'FIELDNAME'. "<--- FIELDNAME FOR COLOR
clrwa-color-col = 6. <------- COLOUR 0-9
APPEND clrwa TO itab-clr.
MODIFY ITAB.
endif.
ENDLOOP.
5. just copy paste in new program
6.
REPORT abc .
NECESSARY / MUST
TYPE-POOLS : slis.
DATA : alvfc TYPE slis_t_fieldcat_alv.
DATA : alvly TYPE slis_layout_alv.
ITAB DECLARATION
DATA : prg TYPE sy-repid.
DATA : BEGIN OF itab OCCURS 0.
INCLUDE STRUCTURE t001.
DATA : clname(3) TYPE c,
clr TYPE slis_t_specialcol_alv,
END OF itab.
DATA : clrwa TYPE slis_specialcol_alv.
PARAMETERS : a TYPE c.
DATA : flname TYPE slis_fieldname.
SELECT
START-OF-SELECTION.
SELECT * FROM t001
INTO CORRESPONDING FIELDS OF TABLE itab..
LOOP AT itab..
IF SY-TABIX <= 5.
itab-clname = 'C50'.
ELSE.
itab-clname = 'C30'.
ENDIF.
MODIFY itab.
ENDLOOP.
LOOP AT ITAB.
check itab-bukrs = '1000'
clrwa-fieldname = 'BUTXT'.
clrwa-color-col = 6.
APPEND clrwa TO itab-clr.
MODIFY ITAB.
clrwa-fieldname = 'LAND1'.
clrwa-color-col = 4.
APPEND clrwa TO itab-clr.
MODIFY ITAB.
ENDLOOP.
prg = sy-repid.
flname = 'CLNAME'.
alvly-info_fieldname = 'CLNAME'.
alvly-coltab_fieldname = 'CLR'.
LOOP AT ITAB.
if sy-tabix = 3.
clrwa-fieldname = 'BUTXT'.
clrwa-color-col = 6.
APPEND clrwa TO itab-clr.
MODIFY ITAB.
clrwa-fieldname = 'LAND1'.
clrwa-color-col = 1.
APPEND clrwa TO itab-clr.
MODIFY ITAB.
endif.
ENDLOOP
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = prg
i_internal_tabname = 'ITAB'
i_inclname = prg
CHANGING
ct_fieldcat = alvfc
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
minimum
*CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
it_fieldcat = alvfc
TABLES
t_outtab = itab
EXCEPTIONS
program_error = 1
OTHERS = 2
extra
sy-uname = 'XYZAB'.
prg = sy-repid.
Excluding
DATA : excl TYPE slis_t_extab.
DATA : exclwa TYPE slis_extab.
exclwa = '&OUP'.
APPEND exclwa TO excl.
exclwa = '&ODN'.
APPEND exclwa TO excl.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
it_fieldcat = alvfc
i_callback_program = sy-repid
is_layout = alvly
i_callback_user_command = 'ITAB_USER_COMMAND'
it_excluding =
excl
i_save = 'A'
TABLES
t_outtab = itab
EXCEPTIONS
program_error = 1
OTHERS = 2.
*& Form itab_user_command
text
-->WHATCOMM text
-->WHATROW text
FORM itab_user_command USING whatcomm TYPE sy-ucomm whatrow TYPE
slis_selfield.
BREAK-POINT.
ENDFORM. "itab_user_command
regards,
amit m.

Hello Friends need help in ALV oops

Hello,
My requirement is that in my ALV ouptut i will edit one cell when i am editing i.e if its is 200,00 i will change it to 300,00 before changing it should ask me wheather to change it or not i need to dispaly a dialog box with yes or no option if i click yes then it should accept the value 300,00.
I am using ALV OOPS.

Hi,
You can achieve this as below,
DATA: w_result TYPE c.
METHOD handle_user_command.
*   Handle own functions defined in the toolbar
    CASE e_ucomm.
      WHEN 'CHANGE'.
CALL FUNCTION 'POPUP_CONTINUE_YES_NO'
EXPORTING
   defaultoption       = 'N'
    textline1           = 'Do you want to change the value?'
*   TEXTLINE2           = ' '
    titel               = 'Confirmation for change'
*   START_COLUMN        = 25
*   START_ROW           = 6
IMPORTING
   answer              = w_result.
IF w_result = 'J'. "J is for yes.
"Write your logic for saving the changes
ENDIF.
ENDCASE.
ENDMETHOD.                    "handle_user_command
Hope thi helps you.
Regards,
Manoj Kumar P

How to do it in ALV OOPS

Hi
Im using ALV OOPS.o/p I have 10 records with checkbox(at user command I have to select record selected by check box). Now on the menu bar I hav a button for "SELECT ALL". If "selected all" 10 recored will be selected. If I filter upon some criteria no. of records will be 3..Now in GUI if I select SELECT all it will display 3 records r selected, but I have to process further internally ,,,but internally 10 records are selected. So how to write code for that is after filterring 3 records r selected and I "select all"..only 3 records will be selected instead of 10?
Part of my code like this..
SELECT all
CALL METHOD G_GRID->CHECK_CHANGED_DATA
    IMPORTING
      E_VALID = L_VALID.
IF L_VALID EQ 'X'.
    LOOP AT PT_OUTTAB INTO LS_OUTTAB.
DATA LS_CELLTAB TYPE LVC_S_STYL.
LOOP AT PS_OUTTAB-CELLTAB INTO LS_CELLTAB.
    IF LS_CELLTAB-FIELDNAME = 'CHECKBOX'.
      IF LS_CELLTAB-STYLE EQ CL_GUI_ALV_GRID=>MC_STYLE_DISABLED.
        P_LOCKED = 'X'.
      ELSE.
        P_LOCKED = SPACE.
      ENDIF.
    ENDIF.
ENDLOOP.
      IF L_LOCKED IS INITIAL
         AND NOT LS_OUTTAB-CHECKBOX EQ '-'.
        LS_OUTTAB-CHECKBOX = 'X'.
      ENDIF.
      MODIFY PT_OUTTAB FROM LS_OUTTAB.
    ENDLOOP.
    CALL METHOD G_GRID->REFRESH_TABLE_DISPLAY.
ENDIF.

Hello Kaushik
Using method go_grid->GET_FILTERED_ENTRIES you get an index list of the filtered entries.
DATA: lt_filtered     TYPE lvc_t_fidx,
          ld_indx        LIKE LINE OF lt_filtered.
CALL METHOD go_grid->GET_FILTERED_ENTRIES
     IMPORTING
       ET_FILTERED_ENTRIES = lt_filtered.
LOOP AT lt_filtered INTO ld_indx.
    READ TABLE gt_outtab INTO ls_outtab INDEX ld_indx.
ENDLOOP.
Regards
Uwe

Double click on cell in alv report

Hi all,
I want to show detail popup on cell of alv report. how to get the cell value.
plz tell me the logic for getting cell value.
thanks in advance.

Hi,
IF RS_SELFIELD-FIELDNAME = 'EBELN1'.
* Read data table, using index of row user clicked on
READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
Please remember the field EBELN1 should be in IT_EKKO. after the read statement you can move which ever field you want to another for further processing
like
READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
if sy-subrc eq 0.
move it_ekkp-( your field name) to v_field
endif.
a®

To set HOTSPOT for a field in ALV-oops and when clecked should call transac

Hi,
I need to set HOTSPOT for a field in O/P list using ALV-oops and when clecked should take me to Transaction VA01. Please help....
Thanks,
Prabhu

Hi,
Please go through this code it may help u.
REPORT zcls_alv_oops MESSAGE-ID z1.
TABLES : mara.
Types Declaration..\
TYPES :
BEGIN OF t_mara,
matnr TYPE matnr,
mtart TYPE mtart,
maktx TYPE maktx,
END OF t_mara,
BEGIN OF t_marc,
matnr TYPE matnr,
werks TYPE werks_d,
mtart TYPE mtart,
maktx TYPE maktx,
END OF t_marc.
Internal Tables Declaration..\
DATA :
i_mara TYPE TABLE OF t_mara,
i_marc TYPE TABLE OF t_marc,
i_fcat1 TYPE lvc_t_fcat,
i_fcat2 TYPE lvc_t_fcat.
Constants Declaration..\
CONSTANTS :
c_cont1 TYPE scrfname VALUE 'CONT1',
c_cont2 TYPE scrfname VALUE 'CONT2'.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
SELECT-OPTIONS:
s_matnr FOR mara-matnr NO INTERVALS.
SELECTION-SCREEN SKIP 1.
PARAMETERS :
p_hotspt RADIOBUTTON GROUP r1 DEFAULT 'X',
p_bttn RADIOBUTTON GROUP r1.
SELECTION-SCREEN END OF BLOCK b1.
\* Class forward referncing.
CLASS lcl_rcvr_class DEFINITION DEFERRED.
\* Pointers Declaration..
DATA :
lp_rcvr TYPE REF TO lcl_rcvr_class,
lp_cont1 TYPE REF TO cl_gui_custom_container,
lp_cont2 TYPE REF TO cl_gui_custom_container,
lp_grid1 TYPE REF TO cl_gui_alv_grid,
lp_grid2 TYPE REF TO cl_gui_alv_grid.
\* Local Class Definiton.
CLASS lcl_rcvr_class DEFINITION.
PUBLIC SECTION.
METHODS :
hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id e_column_id es_row_no,
handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING e_row e_column.
ENDCLASS.
\* Local Class Implementation.
CLASS lcl_rcvr_class IMPLEMENTATION.
METHOD hotspot_click.
DATA :
wa_mara TYPE t_mara,
wa_marc TYPE t_marc.
DATA :
l_index TYPE sy-tabix.
READ TABLE i_mara INTO wa_mara INDEX e_row_id-index.
IF sy-subrc EQ 0.
REFRESH i_marc.
SELECT matnr
werks
INTO TABLE i_marc
FROM marc
WHERE matnr EQ wa_mara-matnr.
IF sy-subrc EQ 0.
LOOP AT i_marc INTO wa_marc.
l_index = sy-tabix.
wa_marc-mtart = wa_mara-mtart.
wa_marc-maktx = wa_mara-maktx.
MODIFY i_marc FROM wa_marc INDEX l_index
TRANSPORTING mtart maktx.
ENDLOOP.
CALL SCREEN 200.
ELSE.
MESSAGE e121 WITH text-005 wa_mara-matnr.
ENDIF.
ENDIF.
ENDMETHOD.
METHOD handle_double_click.
DATA :
wa_mara TYPE t_mara,
wa_marc TYPE t_marc.
DATA :
l_index TYPE sy-tabix.
READ TABLE i_mara INTO wa_mara INDEX e_row-index.
IF sy-subrc EQ 0.
REFRESH i_marc.
SELECT matnr
werks
INTO TABLE i_marc
FROM marc
WHERE matnr EQ wa_mara-matnr.
IF sy-subrc EQ 0.
LOOP AT i_marc INTO wa_marc.
l_index = sy-tabix.
wa_marc-mtart = wa_mara-mtart.
wa_marc-maktx = wa_mara-maktx.
MODIFY i_marc FROM wa_marc INDEX l_index
TRANSPORTING mtart maktx.
ENDLOOP.
CALL SCREEN 200.
ELSE.
MESSAGE e121 WITH text-005 wa_mara-matnr.
ENDIF.
ENDIF.
ENDMETHOD.
ENDCLASS.
\* Start of Selection
START-OF-SELECTION.
\* Extract the Material Master data for the Input Material.
SELECT a~matnr
a~mtart
b~maktx
INTO TABLE i_mara
FROM mara AS a
INNER JOIN makt AS b
ON a~matnr EQ b~matnr
WHERE a~matnr IN s_matnr
AND b~spras EQ sy-langu.
END-OF-SELECTION.
IF NOT i_mara\[\] IS INITIAL.
\* Call Screen to display the Material Master data.
CALL SCREEN 100.
ELSE.
MESSAGE s121 WITH text-006.
ENDIF.
\*& Module DISP_GRID OUTPUT
\* text
MODULE disp_grid OUTPUT.
\* Build the Field catelog for Material Master data.
PERFORM build_fcat.
\* Display the Material Master data using ALV.
PERFORM disp_alv.
ENDMODULE. " DISP_GRID OUTPUT
\*& Module USER_COMMAND_0100 INPUT
\* text
MODULE user_command_0100 INPUT.
\*when exit or cancel is clicked program has to come out
CASE sy-ucomm.
WHEN 'EXIT' OR 'CANC'.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
\*& Form build_fcat
\* text
\* \--> p1 text
\* <-\- p2 text
FORM build_fcat.
DATA : ws_fcat TYPE lvc_s_fcat.
ws_fcat-fieldname = 'MATNR'.
ws_fcat-scrtext_m = text-001.
ws_fcat-tabname = 'I_MARA'.
IF p_hotspt EQ 'X'.
ws_fcat-hotspot = 'X'.
ENDIF.
APPEND ws_fcat TO i_fcat1.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MTART'.
ws_fcat-scrtext_m = text-002.
ws_fcat-tabname = 'I_MARA'.
APPEND ws_fcat TO i_fcat1.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MAKTX'.
ws_fcat-scrtext_m = text-003.
ws_fcat-tabname = 'I_MARA'.
APPEND ws_fcat TO i_fcat1.
CLEAR ws_fcat.
ENDFORM. " build_fcat
\*& Form disp_alv
\* text
\* \--> p1 text
\* <-\- p2 text
FORM disp_alv.
IF lp_cont1 IS INITIAL.
\* Create the Container Object of Material Master.
CREATE OBJECT lp_cont1
EXPORTING
container_name = c_cont1
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6 .
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Create the Object for Grid of Material Master.
CREATE OBJECT lp_grid1
EXPORTING
i_parent = lp_cont1
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
others = 5.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Dipslay Material Master data by calling method.
CALL METHOD lp_grid1->set_table_for_first_display
CHANGING
it_outtab = i_mara
it_fieldcatalog = i_fcat1
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Set Handler for the Hot Spot Event.
CREATE OBJECT lp_rcvr.
IF p_hotspt EQ 'X'.
SET HANDLER lp_rcvr->hotspot_click FOR lp_grid1.
ELSE.
SET HANDLER lp_rcvr->handle_double_click FOR lp_grid1.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " disp_alv
\*& Module STATUS_0100 OUTPUT
\* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'MAIN_STAT'.
SET TITLEBAR 'T_100'.
ENDMODULE. " STATUS_0100 OUTPUT
\*& Module STATUS_0200 OUTPUT
\* text
MODULE status_0200 OUTPUT.
SET PF-STATUS 'PLANT_STAT'.
SET TITLEBAR 'T_200'.
ENDMODULE. " STATUS_0200 OUTPUT
\*& Module DISP_GRID_plant OUTPUT
\* text
MODULE disp_grid_plant OUTPUT.
\* Build the Field catelog for Material Plant data.
PERFORM build_fcat_plant.
\* Display the Material Master Plant data using ALV.
PERFORM disp_alv_plant.
ENDMODULE. " DISP_GRID_plant OUTPUT
\*& Module USER_COMMAND_0200 INPUT
\* text
MODULE user_command_0200 INPUT.
\*when exit or cancel is clicked program has to come out
CASE sy-ucomm.
WHEN 'EXIT' OR 'CANC'.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
\*& Form build_fcat_plant
\* text
\* \--> p1 text
\* <-\- p2 text
FORM build_fcat_plant.
DATA : ws_fcat TYPE lvc_s_fcat.
ws_fcat-fieldname = 'MATNR'.
ws_fcat-scrtext_m = text-001.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ws_fcat-fieldname = 'WERKS'.
ws_fcat-scrtext_m = text-004.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MTART'.
ws_fcat-scrtext_m = text-002.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MAKTX'.
ws_fcat-scrtext_m = text-003.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ENDFORM. " build_fcat_plant
\*& Form disp_alv_plant
\* text
\* \--> p1 text
\* <-\- p2 text
FORM disp_alv_plant.
IF lp_cont2 IS INITIAL.
\* Create the Container Object of Material Plant data.
CREATE OBJECT lp_cont2
EXPORTING
container_name = c_cont2
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Create the Object for Grid of Material Plant data.
CREATE OBJECT lp_grid2
EXPORTING
i_parent = lp_cont2
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
others = 5.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Dipslay Material Plant data by calling method.
CALL METHOD lp_grid2->set_table_for_first_display
CHANGING
it_outtab = i_marc
it_fieldcatalog = i_fcat2
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ENDIF.
ELSE.
\* Call method 'REFRESH_TABLE_DISPLAY' to refresh the grid data.
CALL METHOD lp_grid2->refresh_table_display.
ENDIF.
ENDFORM. " disp_alv_plant

Problem while placing a button in the Output using ALV OOPs

Hi,
I am using ALV OOPs to display report output.
In the toolbar i have to palce an update button and if i click on that update it should then call the selection screen 500 .
So,please help me to achieve this using ALV OOPs.
THANKS & REGARDS,
Kiranmai.

Hi,
you can use set pf-status statement with the OOPs' concept where in you will have to give this in the events table and pass it to the method to display the alv ...
Regards,
Siddarth

How to give color of particular cell in alv list display for dynamic table

Dear Experts,
i want to give color of a particular cell in alv list display (reuse_alv_list_display). Here i am passing data through dynamic table?

Hi,
Se this:
DATA: lt_color    TYPE lvc_t_scol WITH HEADER LINE.
DATA: BEGIN OF data_tab OCCURS 0.
         tabcolor     TYPE   lvc_t_scol,
      END OF data_tab.
* Befone ALV call
alv_layout-coltab_fieldname = 'TABCOLOR'.
* For each row in data_tab
REFRESH: lt_color.
CLEAR: lt_color.
lt_color-color-col = 6.
lt_color-color-int = 1.
lt_color-fname = FIELD1'.
APPEND lt_color.
lt_color-color-col = 2.
lt_color-color-int = 0.
lt_color-fname = 'FIELD2'.
APPEND lt_color.
data_tab-tabcolor[] = lt_color[].
append data_tab.
Best regards,
Leandro Mengue

Req:Download of purchase order item details using ALV oops

Hi all,
How to download the purchase order item details using ALV oops from the output of header details

Hi all,
How to download the purchase order item details using ALV oops from the output of header details

LED in field of ALV(OOPs oriented)- Traffic lights in ALV filter popup

Hi experts,
Am showing LED in field of ALV(OOPs oriented)and when i click on ALV filter for led field..it shows me Traffic lights in poup for filter.Please help me to get LED in filter popup also.
Thanks,
Sajay.

Hi,
Use the fuction module 'ICON_CREATE' as follows.
CALL FUNCTION 'ICON_CREATE'
    "To create Red/Yellow/Green traffic icons
      EXPORTING
        name   = wrk_light
      IMPORTING
        RESULT = ip_status.
wrk_light can be;
'ICON_RED_LIGHT'
'ICON_YELLOW_LIGHT'
or 'ICON_GREEN_LIGHT' according to your scenario, that you can use the logic for your scondition.
Use it in PBO.
Regards,
Renjith Michael.

How to make cell editable alv in WebDynpro for ABAP?

I make Column editable ALV.(See under source code)
But I can't make Cell editable ALV.
How to make Cell editable ALV in WebDynpro for ABAP?
and..how to get changed data?
DATA: l_value TYPE REF TO cl_salv_wd_config_table.
l_value = l_ref_interfacecontroller->get_model( ).
* { EDITABLE
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings,
        lr_input_field     TYPE REF TO cl_salv_wd_uie_input_field,
        lr_column          TYPE REF TO cl_salv_wd_column.
lr_column_settings ?= l_value.
lr_column = lr_column_settings->get_column( 'TOTAL_COUNT' ).
CREATE OBJECT lr_input_field
    EXPORTING
      value_fieldname = 'TOTAL_COUNT'.
lr_column->set_cell_editor( lr_input_field ).
DATA: lr_table_settings TYPE REF TO if_salv_wd_table_settings.
lr_table_settings ?= l_value.
lr_table_settings->set_read_only( abap_false ).

the code seems to be correct....but where are you writing it?
put the code in the wddoinit method and it should work.
have a look at this article..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3133474a-0801-0010-d692-81827814a5a1

Colour cells in ALV OOPS

Similar Messages

Maybe you are looking for