Colour correction help please!!!!!
Hi any help please would really appreciate it,
i am doing these videos where some of the camera colors dont match ,i have been trying colour correctiing and going around in circles trying to get these images to match,
any suggestions(even rude ones) i would be greatful and any ideas what the cameraman has done on the right for future reference.
cheers
simon
http://bp2.blogger.com/P80J6ctJuqo/RaTyPyeBuDI/AAAAAAAAAWc/XeJkNVHdXg/s1600-h/coloyrcorrectionhelp.jpg
Hi:
Check this tutorial about Using Match Hue in FCP 5 .
I im sure it will help you to match both takes.
Hope it helps !
Alberto
Similar Messages
-
SB X-fi Xtreme Audio PCI-E Not working correctly help please
Hi i have a SB X-fi Xtreme Audio PCI-E card on my pc , i have currently installed windows 7 and for months now i am trying to make the card work .. I have a poor sound especially when there is bass, the card is not detected by windows 7, its detected as a high definition audio device , when i plug my mic is not found..and i cant use the creative applications because is says its not supported or i have no creative poroducts on my pc ... I have tried all the latest drivers and stil have the same problem.. HELP PLEASE !!
First, uninstall all creative drivers, console, from add/remove. Restart computer install: . X-Fi Xtreme Audio Series Driver .04.0000 from creative website. 2.X-Fi Xtreme Audio Pack .03.0002 from creative website. 3. install Creative Console from here: http://forums.creative.com/t5/Sound-Blaster/PAX-Console-Launcher-V-0/td-p/549970 * PAX Console, Modded Original Console, but newer then Creative) or this creative console: CSL_PCAPP_LB_2_6_09.exe ( it creative original console) With this console you will have bass, treble, etc, BUT you need to open ConsoLCu.exe from Program Files/Creative/Console Launcher. ConsoLCu.exe have all the options you need. Creative forget about thier sound board, thier drivers, bass, treble, etc, about customers. If you install thier drivers from their website you will not have BASS, and also an crappy sound. You need to install Creative Console from google, or from http://forums.creative.com/t5/Sound-Blaster/PAX-Console-Launcher-V-0/td-p/549970 to have bass, crystalizer, etc. I also have Creative Audio PCI-e board..... crappy chipset, just like Sb Li've 24 biti PCI.
-
FCE not exporting color corrections (help please)
I see there are some really experienced Final Cut folks here. Anyone care to help with this glitch?
I've imported AVCHD footage from a Canon Vixia in 1920x1080. I edit it in Final Cut Express. I add Color Correction and Brightness / Contrast Filters. Then I export it as regular Quicktime (no compression). For some reason the brightness changes get exported but the color correction changes do not. I have tried rendering the footage before export. No change. It only exports brightness edits.
How can I fix this?
thank you for your help!Hi and welcome to the forum!
What are your sequence settings? Are you seeing the color changes in your canvas before export? -
i run windows 7 on a sony y series. before upgrading to 6.0 firefox worked seamlessly. now it will not open any websites at all. i have uninstalled and reinstalled it to no avail. thoughts? help? ...
I will be using IE9 until this is fixed. Perhaps for good!!
-
Fireworks 8 not exporting correctly - Help please!
I'm having a problem with files that were originaly created
in Fireworks 4 several years ago and have been updated in Fireworks
MX then MX2004. They are complicated disjointed rollovers which
involve twelve frames under one slice. When exporting to
Dreamweaver HTML it created that file with twelve frame images (as
in r10_c1.jpg, r10_c1_f2.jpg, r10_c1_f3.jpg, etc). All the other
images were just one file. As it should be. No problems for years
until now, with Fireworks 8, I get 12 frame images for every single
slice! A huge waste of my time going in and deleting literally
hundreds of unwanted files for every html page I generate for my
client's site. This is NOT the way Fireworks has always worked. I
consider this a major flaw and will not purchase the upgrade unless
it it fixed. I'm now spending hours trying to fix this **** mess!
WebDevDivaThanks Linda for responding to our issue. If you look at the
website I am referring to, you will see why I need to be able to
export the way I used to in all the previous versions of Fireworks
(back to 4 anyway).
http://www.artwaresjewelry.com/stewart.html
I don't generate entire html pages with Fireworks just the
main content area that I apply my page templates to in Dreamweaver.
This site has 20 "featured jewelry designers" and each of them has
12 items to a page.
When you click on a thumbnail image it creates two disjointed
rollovers. One changes the large image on the page to the large
image that corresponds to the thumbnail image that was clicked. The
other changes the image below that has the description and price of
the item. These each require 12 frames. Also on each designer page
as needed are two simple rollovers for previous and next. These
require two frames. The rest of the images only need one frame.
I much prefer to do one export rather than have to export
each slice seperately or even worse each frame seperately. I'm sure
that there is a better way to accomplish this today but this site
was originally built when Fireworks 4 and UltraDev were new.
Rebuilding it would be a major project that my client would not be
willing to fund at this point.
I still wish someone in software development would address
this issue and why the export behavior is not working the way it
used to. Maybe if they would post something on the emerging issues
for Fireworks 8 section...
Thanks,
Anna Stewart
A Stewart Design -
I changed the name of my apple id and now I can't use the app store on my phone correctly because it's using my apple id's old name. I signed out and in on itunes and synced my iphone. Still doesn't work. Help please?
Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.
Note: Apps are forever tied to the Apple ID used to originally obtain them. They cannot be updated using any other Apple ID other than the one they were originally obtained with. -
When I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' . My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please? I have restored my ipod to factory settings and rest it.
I also tried moving the date forward by a year and then moving it back to normal and it still doesn't work. i can't find an automatic update of time zones on my itouch to turn this off.
-
When starting Window XP on my laptop (which was connected, in the past, in a wi-fi network now no more available) appears immediatly this allert: "iTunes Helper was not installed correctly. Please reinstall iTunes. ERROR 7."
Reistallation of older or up to date iTunes versions is impossible because: "Installation package iTunes.msi is located on a network resource not available" and because "It is impossible to remuove thew previous verson of iTunes. Impossible fto find the path."
Someone can help me ???
Thank,
GeraldTake a look at iTunes for Windows: "Error 7" message when opening iTunes. Perhaps your .NET Framework needs a repair.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
My Toshiba laptop just recently started showing the the following error message when I try to open iTunes: " iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 998)". I did what was requested and reinstalled iTunes, but still get this error message. Help!
b noir I never got any message about an entry point
Many thanks. If we're looking at a "naked" Error 7, I'd start with box two in the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I have been having this problem since the 4th of this month. I tried to open iTunes and this error message came up: "iTunes was not installed correctly. Please reinstall iTunes error 7 windows error 126". There is nothing else that comes up but if anyone can help or know anything about it I will greatly appreciate it.
Have you tried google for this Error Message...
http://support.microsoft.com/kb/959077 -
I did the iTunes update yesterday and now I am getting this message when I try to open iTunes - “This copy of iTunes is corrupted or is not installed correctly. Please re-install iTunes. (-42037) Can anybody help me out resolving this?
Download iTunes using the tab at the top of this page, re-install. Back up your computer first.
-
iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 5). I have uninstalled in correct order and reinstalled but still getting same error message. Any help??
Take a look at iTunes for Windows: "Error 7" message when opening iTunes. Perhaps your .NET Framework needs a repair.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
I'm trying to sync my iphone in IPhoto. I get this message "your MobileMe account information is not correct". "The provided login or password is not valid." when I click on the "Open MobileMe Preferences" button, it doesn't take me there. Help please.
Mobile me has been discontinued for over a year. What system and iPhoto versions are you running?
How are you trying to sync? With Photo Stream or thru iTunes?
Do you have an iCloud preference pane in your System preferences?
Do you meet the minimum requirements for iCloud and Photo Stream?
iCloud: System requirements
iCloud: Photo Stream FAQ
OT -
I buy extension from adobe online, i installed it correctly but then the extension menu was greyed out and i can't click it. Some help please.
hello ptbruce, you probably only selected to open (not save) the video which will download it into windows temporary folder where it gets deleted again after it has been used. <br>you could try to right-click the entry in the firefox download manager and copy the link of the source file and try if you can download it through this url again. otherwise you'll have to contact the vendor of the video to find a solution...
-
An update to my Touch went haywire and I lost my music and apps but luckily I had subscribed to i Cloud and they were reinstated but my music contents page - "artists", "songs" etc. no longer has any colour and the shuffle will not work. Help please?
Yes, the color has been deleted iOS 6.
You have tried turingin on shuffle, right?
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
Maybe you are looking for
-
How can we allow over 103,718 list of values to display in webi report selection?
I know, why would we want to? Our business users would like to see the list ordered and first select from a range and drill down. Any query in information design tool already does this as well as the preview values for the LOV object. Is there a way
-
All songs in itunes not playing
A few real bad problems here! 1. I am running Itunes 12.0.1.26 on a PC with Windows 8.1 it's a Dell. *after almost a year of trouble recovering all of my playlists that had gone missing due to an itunes error I was happy to find myself two days a
-
I need professional data recovery help
Can anybody point me in a good direction for people who can help with Mac-related data recovery? (I've been trying AppleCare all day and they've been no help at all)
-
HDD crashed! How to install Tiger onto 867mhz G4 with no DVD drive??
Hi folks. My trusty 867mhz G4 Quicksilver Powermac drive has finally konked out. It was running OS 9.2.2 before. Now I want to install Tiger as the OS. Having only a CD drive (nope, can't read or write DVD's), how do I proceed to install Tiger (I hav
-
J1INMIS : Correct amount not picked while challn printing
Dear Gurus, I am facing problem while running tcode J1INMIS for Challan Update Status. When I am running the transaction system is showing INR 178 amount against WHT tax code CC . which I can see in the accounting document also. but while updating ch