Colour Correction not exporting on clip

Hello
I am trying to broadcast safe a project I am working on and have come pretty close to colour safe levels. However I seem to be a little over white exceptance. So I've added a levels effect to pull down the bright areas, then I re-export the clip complete with changes, bring it back into PP and the effect hasn't shown up in the export. I have applied the clip both to an adjustment layer and the clip itself.
See image attached
The image on the left is slightly over 1volt colour safe. Then I add the levels effect (on the right) which corrects it, then export. Once I bring it back in the levels are still as they are on the left.
I'm exporting to Prores 422, MPEG2 and also exporting using sequence settings. No joy.
Any ideas?

That looks close for something that is not that much over anyway when just applying Levels with No parameter changes.
If the original was a bit more over you would see noticeable clipping ( flat) by just applying Levels with No parameter changes.
Use Levels on an Adjustment Layer or directly on the clip (not both) but drop white (highlight) down a tad more. eg 98%
DO a test by going too far.
How does the RGB Parade look. You need to check Chroma Levels as well..

Similar Messages

Colour corrections not saving and not exporting

Am puzzled by something in FCE. I did a whole load of colour corrections, then saved and closed the project. Whenever I re-open the project, all the colour corrections are un-done. All other edits are unaffected. This happens repeatedly.
Also, after re-doing the colour corrections, saving and NOT closing, I exported the project to MPEG2. The colour corrections did not come through on the exported file.
My timeline is 3.5hrs long, and re-doing all these colour corrections is *time consuming*.
Please does anyone have any ideas what I'm doing wrong?
Any help appreciated.
iMac Mac OS X (10.4)

No.
If you have created some modified effects (eg. 3 second dissolve) and put them into your FCE Favoutites Bin, trashing the preferences will trash these. They can easily be re-created or save this Bin somewhere else and bring it back if that's the course of least resistance.
Al

How to extract (not export) a clip from iMovie?

I know how to select a clip and the export it into a Full Quality .DV file. However, this operation takes a few minutes and displays a messaging saying it was compressing the file.
I also notice that when my iMovie project is loaded, it says it is loading clip1.dv clip2.dv etc. So I guess despite the iMovie project appears to be one file, it is actually maintaining all the clips separately. So if I want to share a copy of Clip1.dv, I should be able to extract it quickly. I would assume the extraction should be as quick as a file copy. However, I could not find a quick way to get to the clips. Exporting the clip seems to be the only way to get the clip out and it is taking unnecessarily long.
I vaguely remember the older version of iMovie actually uses a folder to hold the .dv files instead of using a project. The newer version of iMovie seems to be more less efficient to require an export.
Can anyone share your trick on how to by-pass the compression and exporting process and get to the clip files directly?

LaiPod wrote:
.. I vaguely remember the older version of iMovie actually uses a folder to hold the .dv files instead of using a project. The newer version of iMovie seems to be more less efficient to require an export.
Can anyone share your trick on how to by-pass the compression and exporting process and get to the clip files directly?
ctrl-click on your project-file, choose 'show package'..
inside is a 'Media' Folder, containing all 'clips'..

Audio Will not export for clips longer then one minute

I am running adobe premiere pro cs3 on my HP Pavilion. i run windows XP service pack 2.
Until recently i had no problem but the other day I tried exporting from adobe media encoder under these settings:
Format: M-PEG 2
Widescreen 16:9
NTSC
The bit rate varies. I've done larger bitrates and smaller bitrates. it doesnt help.
And suddenly it would render my full video with an mpg extension but there was no audio. I ran it again but shortened the size of the clip, and it came out perfectly fine, audio in tact. lengthened the sequence again and it wont export audio. its not that the audio box isnt checked, and its not rendering the audio as a seperate file like it used to. I do a LOT of editing and run my own online show, so it is very important for me to be able to render these videos like this. I could always render as AVI but that takes up soooooo much space, and most of the other formats are too low quality for me to import again and edit, or even just to upload for people to see. can anyone help me?

Yes, HDD = Hard Disk Drive. One often sees it listed as HD, but that can also stand for High Def, so I use the HDD abbreviation myself.
Now, how you have things set up, that 15GB of free space is probably not nearly enough. This is especially if one has their Windows Page File dynamically managed by the OS (default method), as it is very, very likely that the Page File is filling up the remainder of the HDD.
If everything is on the external, media, Project, Scratch Disk, Export folders, etc., one might be able to squeak by with that overloaded HDD, but I need to point out - at about 75% of capacity, the HDD's performance will start to slow, and this will intensify, as more is used. This overfilling can result in failure. I would look into cleaning up the C:\.
Also, when video editing, a 2x physical (not partitions) HDD setup is the bare minimum, and a 3x HDD setup is even better.
Some get around this, a bit, by using eSATA externals, which will be almost as good as the internals. Not sure that I would recommend any other connection type though. I use FW-800 externals, but have a minimum of a 3x internal on my laptop and an 8x on my workstation, so there's always plenty of internal storage. I just use the externals, to migrate the Projects between my computers.
Good luck, and pay really, really close attention to that filled C:\.
Hunt

After recent update to 10.0.6 clips with colour correction lost right hals of the clip

After update to 10.0.6 in projects created before update, some (not all) clips with colour correction appiared with right half of the screen in total black like this:

Can you see it now?
the media - is proxy. High quality media is optimized media converted from Canon 5D footage. No third party software

Final cut pro 10.1.2 Update - Color Correction / Grading Not Exporting

Hi guys
Since upgrading to Final Cut Pro 10.1.2, the software is working almost perfectly fine, but when exporting movies - whether I export them as h264, iTunes or directly to YouTube - they do not export with the colour corrections I applied to different shots. Does anyone know a way around this?
Best wishes and I look forward to hearing from you.
Shai

Thanks Tom
Here's a screenshot of what the Quicktime file looks like compared to the fcp movie. There are a couple of shots where the color correction stays intact, but for the majority, the export seems to ignore it completely. Very strange.

Which functions and features in Numbers are NOT exported correctly to Excel?

I wish to know EXACTLY which functions I use in a Numbers sheet WILL FAIL to export correctly to an Excel or Neoffice spreadsheet.
For instance, I created a Numbers spreadsheet using prolific use of the IFERROR function. However, when I EXPORT to XLS, all the cells that used the IFERROR function were replaced by the literal value of the cell. My IFERROR formulae were not EXPORTED as I had expected.
I note that some formulae were converted correctly in my EXPORTED spreadsheet: eg MAX, MIN, AVERAGE.
I understand that IFERROR was a function introduced recently to Excel, ie in the 2007 version. Consequently, I suspect that Numbers exports to a pre-2007 version of Excel. If so, which version?
I have found this list that shows which functions are compatable amongst various versions of Excel:
Excel Functions: Compatibility Reference (2010, 2007 & 2003). (n.d.). Retrieved from https://docs.google.com/spreadsheet/ccc?key=0AsHau4_IeCfwdG45c0VhcjBBUGNreVo2ZzN NRU1BT0E#gid=0
This list shows that, for instance, IFERROR exisits inb both Excel 2007 and Numbers-09. So why is IFERROR not exported?
Curmi, J. (n.d.). Summary of function in excel and numbers-09. Retrieved from http://curmi.com/blog/wp-content/uploads/2009/01/functions-in-excel-and-numbers- 09.pdf
Some examples of my use of ISERROR in Numbers are as follows:
=IFERROR(RANK(C47,$C47:$J47,1),"")
=IFERROR(MEDIAN(C51:C58),"")
=IFERROR($C32-C88+1,"")
I use the above function to carry out the calculation ONLY IF a cell is non-blank and contains a number.
More questions
What are the rules that Numbers uses to convert to Excel?
Is Numbers converting to the 2003 version of Excel? ... or an earlier version? ... which version?
Why desn't Numbers advise me there were conversion errors or simplifications made?
eg: "Cell A33 Function IFERROR was exported to the cell value for Excel"
Is there a preference that I can select which version of Excel that Numbers will export to?
In the meantime, I must abandon Numbers and use NeoOffice!

Thanks,
I applied your suggested ISERROR transformation to examples such as:
=IFERROR(RANK(C47,$C47:$J47,1),"")
=IFERROR(MEDIAN(C51:C58),"")
=IFERROR($C32-C88+1,"")
However, a caution for young players....
Certainly, the ISERROR function exports to .xls. However, it behaves differently in NeoOffice.
Items 1 and 2 function identically in the case of say, ranking a row in which some cells are blanks.
Item 3, when translated using ISERROR to =IF(ISERROR(C32-C88+1),"", C32-C88+1), results in "" (ie error is raised) in Numbers but yields figure 0 in NeoOffice when there is a blank in either of the cells.
I recall from programming school in the mid-1970s that using GOTO statements and On Error branch statements were not admissible as routine programming steps. In fact, we received an automatic fail grade if we used a GOTO or GOTO like construction. So, I have found a more programmatically elegant way to solve my problem: eg:
=IF(C88="","",C32-C88+1)
Curiously, earlier I found/suspect this does not work equivalently in Numbers and NeoOffice:
=IF(ISBLANK(C88),"",C32-C88+1)
When you try using ISBLANK you always get an intuitively unexpected result because ISBLANK ONLY gives TRUE when there is absolutely nothing in a cell. A Formula reference in the cell, even if the function result yields "", gives FALSE... because, according to the definition of ISBLANK the cell contains a formula.
As I tell my students, ALWAYS lookup the HELP on any function you use. ALWAYS test the function to see how it performs!.... and lesson 3: Always test your spreadsheet on different systems.... then hope!
FYI:
Here's a link to my Spreadsheet (Neoffice .xls) and a video explaining its use.
Team Contribution: Introduction (Prototype). (2013). Retrieved from http://www.youtube.com/watch?v=bj87FGLoplk&feature=youtube_gdata_player
I don't guaranteee this link for ever! ... and I continue to "tweak" it
https://www.dropbox.com/s/1jz7gzksejnbqo1/Team%20Contribution.xls

Export to Clip Notes - No queue at AME

When I export my PP CS4 project (DV PAL) to Clip notes, Media Encoder opens, but there is no queue. All other exports do media encoder are working fine. Only the Clip Note export funtion seems not to work. Anyone challenged this before?

This is somehow interesting: I figured out that it works when I use the user defined settings. Only with the presets (such DV PAL or NTSC 512 KB Download) it does not work. I can live with that (but I Adobe should fix this). Did you try the presets?

CS4 - Clip Notes Export - streaming option

Anybody wanna save me a little time experimenting and go into a little more detail than is available in the manual? There is of course the promise of 10 points in it for you.
If I choose file/export/adobe clip notes and in the clip notes tab also choose "stream" and then check FTP in the others tab with all of the pertinent info including remote directory and back in the clip notes panel use the ftp address for the url setting - here is where I'm starting to get confused. Does the url setting need to include the path to the remote directory? Do I have to upload an encoded version of my sequence manaully to that direcory or does Media encoder upload that automatically? I've watched a couple of video tuts and read the manual but have no actual experience at this and would love to start using this feature with a client I am working with now.
TIA

edit - nope didn't work. I know the manual mentions that the ftp server also needs to be a web server. iDisk is a web server. I tried also just pointing to the file - with out the sharing which is probably not necessary - providing of course I have the right url path - didn't work. Could be the path I'm typing. http://www.me.com/idisk/my user name/movies/the file name
The work around I'm going to employ in the meantime is to do the embed option and upload that larger sized file to the ftp manually. Then when they save it it will email the smaller .xfdf file back to me and I merely import it.
What is a bit odd is that Adobe didn't use flash as a method of encoding this clip notes file. The same size .flv for the particular file I'm using as a test looks much nicer than either the .wmv or the .mov Adobe owns flash right?
Are you talking about the FTP upload function here? Because that HAS to be a proper FTP server in order for the FTP upload to work. In other words, if your website is http://www.mysite.com, you would need FTP access at ftp://ftp.mysite.com. Now, ClipNotes doesn't access fils through FTP, it access streaming files through HTTP, so wherever the file is hosted on the Internet, it needs to be accessible through the HTTP protocol. I'd imagine that your iDisk (is that the Mac thing?) would probably work for HOSTING the file, but you'd need to find an alternate means of uploading the encoded video to that host. There's probably some sort of web-based front-end for iDisk, instead of having FTP access as a typically web host would provide.
Long story short: you don't have to use the FTP upload built into AME in order to use Clip Notes. You DO have to set the URL for the uploaded video properly, but the video does not have to be uploaded by AME in order for Clip Notes to work. The file will be encoded and saved locally, to wherever you opt, and you can manually upload the encoded video later. This is how I imagine you'd have to use the iDisk hosting/space.
Does that make any sense?
I've often wondered why Adobe didn't opt for Flash in Clip Notes, and the only thing I can come up with is the Flash video container file doesn't provide for accurate enough seeking. Flash video tends to jump to specific keyframes, making navigation (and therefore, commenting via Clip Notes) a challenge or even impossible. I guess it's conceivable that they'll work something out in a later revision of Clip Notes, but that's merely wishful thinking.

Devanagari font in layed out in Indesign (using IndicPlus) does not export correctly to a PDF.

Namaste InDesign gurus,
I have a problem at hand. Wondering if anyone has encoutered similar problem before? Any help is greatly appreciated. And if you're in San Francisco bay area - I can buy you a lunch :-)
Short description: Devanagari font in layed out in Indesign (using IndicPlus) does not export correctly to a PDF. All the ligatures are assembled and displayed in the PDF.
Adobe Indesign Version: InDesign CS5 Design Premium - regular U.S. version (not ME).
Steps I took:
I purchased CS5 Design Premium and also purchased the IndicPlus plugin to author sanskrit documents in InDesign. I create Sanskrit text using either of the following methods.
1) Itranslator
2) Paste the devanagari from the Itranslator directly into InDesign or paste it first into MSWord and then copy from MSWord and paste it to Indesign.
It doesn't matter how I paste it. After I apply the IndicPlus character/paragraph style so that the sanskrit looks good in InDesign, when I try to export it to a PDF. The PDF does not display the ligatures currectly. It just lists all the characters in order without assembling.
I've spent a lot of money buying CS5, IndicPlus and then I can't even create a simple PDF document from InDesign. It is very frustrating.
Has anyone been able to successfully export a sanscrit document from InDesign PDF ?
(Please let me know if my problem description needs more fleshing out).
I could create the PDF from MSWord directly but I'm trying to use indesign to layout my book. If InDesign cannot export to PDF I'll just have to use MSWord for my book layout. I've spend probably scores of hours trying to learn InDeisn and formatting my book content - seems like it is all going to be waste.
Is MSWord the best choice or only choice for laying out books that have sanskrit text in them?
-Ravi

Has anyone been able to successfully export a sanscrit document from InDesign PDF ?
Not Sanskrit, no, but plenty of Hindi, Nepali, Marathi, and other languages written in Devanagari script - so it should be possible. I don't even use IndicPlus, which by most accounts makes working with Indic text much easier.
1) Itranslator
I've never seen this, but a quick Google led me to the homepage of ITranslator for Windows, where I saw this:
Itranslator 99 (Build 1.3.0.86) & New Beta Version
uses 8-bit true type fonts and is compatible
with Windows 95/98/ME/NT/2000/XP.
For more information, click here.
Itranslator 2003 (Build 2.0.0.38) & New Beta Version
uses 16-bit Unicode-compatible fonts and is working
only on Windows 2000 / XP / Server 2003.
For more information, click here.
So, if you're using ITranslator 99, there's the problem - those "8-bit true type fonts" won't work in InDesign. Can you post a sample of the text you're trying to paste into InDesign? Name the font(s) you are using, both in Word and in Indesign, and if possible make a small sample of the text available for us to test. It's also possible that InDesign is using a substituted font, which could cause this problem. So, if the font name in InDesign has brackets around it, you know that InDesign doesn't actually have that font installed and is auto-substituting. Also, if you go to View -> Screen Mode -> Normal and the text is highlighted pink, you know that the font has dropped. (Unless the highlighting for dropped fonts was turned off - check in Edit -> Preferences -> Composition and make sure that "Substituted Fonts" is checked.
Also, for what it's worth, is there any way you could Place your text instead of copying and pasting? This may be cause of your problem - but even though it probably isn't, it's still worth a try.
Lastly - no, I've found InDesign to be superior for typesetting for almost all languages, but the learning curve is pretty steep, and many of the problems faced by people working in non-English languages are not easy to research when you have a problem.

Acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)

I use the CS6 suite with Acrobat XI at windows platform.
When I want to save a file from InDesign as .pdf with output intention eci_iso_coated_v2_300 the result is a .pdf with more than 300% ink coverage.
I tried to transform the result in Acrobat XI into this standard output intention, but also the result has more than 300 % ink coverage.
What is the reason of this bug?
Before with Acrobat X this worked without problems

Hi Rob,
I was told the new way to work would be to draw files via Bridge direct into the InDesign file
and I thought automatically the color would not be changed.
my colourmanagement setting in bridge for the whole CS6 was ECI isocoated_V2_300
The Illustrator file was saved without color profile.
In this test file I used 3 kinds of black: background of pirate in cmyk 79,34 / 72,78 / 59,38 / 79,88 = ink coverage 291 %
DÜSSELPIRATEN in “black” (if you would convert this in the file with the cmyk button it would be the same ink-percentage as before
“e.V.” was set to 100 % k
I set the preferences for Acrobat from InDesign CS6 as pdf X4 with profile eci isocoatedV2_300 in three ways:
no color conversion
convert to profile
convert to profile keeping existing values
in all tree files the pirates background has 322 % ink coverage instead of 291 %
Why does Acrobat convert “black” in the wrong way? If I click in Illustrator on the 4c button to convert the “black” into 4c it is 291% ink
Acrobat should come to the same result with all profiles: iso coated V2 and iso coated V2_300
The same happens also by saving as .pdf X3 or .X1
The minimum what I expect is, that Acrobat reduces ink coverage for black to 300 %
I also made test with the new ECI profiles for laminated prints from 2012.
And with newspaper profiles
In this case the ink coverage comes below 300 %, but only when I choose convert to profile.
And then the 100 % k converts to cmyk, what I don’t want to have with text.
Is there no way to reduce ink coverage below a special percentage without changing Text 100% k
And is there a bug in Acrobat XI with the ECI IsoCoated_V2_300 Profile? For there is no color reduction below 300 % in all conversion settings.
I can’t test this with Acrobat X or IX, for my computers with this software don’t run with CS6 64 bit.
enclosed you find my files
Kind regards
Lutz Hanbueckers
Hanbueckers Werbung GmbH
Brandsackerstr. 5
40764 Langenfeld
P.O. Box 40 02 01
40242 Düsseldorf
Tel. +49 02173 1 09 44 - 0
Fax +49 02173 1 09 44 - 10
[email protected] <mailto:[email protected]>
www.hanbueckers.de
Visit our site
Steady attractive offers!!!
HR Düsseldorf B 26 480
owner Manager: Lutz Hanbueckers
Von: Rob Day [email protected]
Gesendet: Samstag, 2. März 2013 04:26
An: Hanbueckers Werbung
Betreff: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
Re: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
created by Rob Day <http://forums.adobe.com/people/rob+day> in InDesign - View the full discussion <http://forums.adobe.com/message/5115613#5115613

Strange. I can play all my clips in FCP 7, but can not export them via share, nor submit them via Compressor. What happened? Thank yiou for your kind help, I can not continue my work! FCP 7!

Strange. I can play all my clips in FCP 7, but can not export them via share, nor submit them via Compressor. What happened? Thank yiou for your kind help, I can not continue my work! FCP 7!

When FCP/FCS begins to act unexpectedly, the usual first step is to trash your preferences:
https://discussions.apple.com/docs/DOC-2491
MtD

Png files not exporting in correct color code

Hey everyone I've had this continual problem in illustrator with png exports, for some reason my png's export with duller, less saturated colors than what I am seeing inside of illustrator. However, my jpegs export correctly. I've been able to figure out that my png's are not exporting with the correct color code (sRGB), even if this option is selected in "save for web" options. I have been having to open the png's in Mac's preview program or opening them into photoshop and exporting with sRGB profile embedded from there. I figure there must be some setting I don't have selected within illustrator. Document color mode is RGB, working space is sRGB, "Color Management Policy" is preserve embeded profile, and under the "Assign Profile" option it is set to working space RGB: sRGB. Any suggestions?

I don't think there is anything wrong with the color management you are using.
I suspect that you are using Illustrator CS6.
Although you can specify that the image has to be converted to sRGB (and it probably does), the profile is not embedded in the file.
The latest CC version does, although you cannot check a box: ICC Profile like you can when saving JPEG.
I think the reasoning behind this could have been: "PNG is a web file format. and Browsers cannot be trusted with colormanagement, most of them think that all files are sRGB, so why embed the profile..."
So you did the right thing by assigning the profile in Photoshop.
Ton

Export to Clip Notes

Hi
When I try to export to clip notes After Effects freezes and trying to select anything gives me the 'ping' noise. The only way out of this is then to close the program down from the windows task list.
Anything?????
thanks

I never used Clip Notes myself, but I did a quick search, and came up with the following:
http://www.adobe.com/cfusion/search/index.cfm?term=clip+notes&siteSection=home&loc=en_us
There are no Clip Notes references in this list beyond AE9 (aka CS4). I suspect that the application was not retained in later versions. If you have any intentions of upgrading software beyond AE 9, I don't think I'd get in the habit of relying on Clip Notes.
If I'm wrong about this, an Adobe employee will most certainly set me straight.

"Non rectangular objects will not appear correctly when exported using CSS."

I am using Ind CC 2014 exporting a document to a reflowable epub. The document contains an .ai image. The image exports correctly in some parts of the.epub but not others, where it is distorted. There is a warning on export :"Non rectangular objects will not appear correctly when exported using CSS." Any suggestions appreciated.

Thanks!
>
"Non rectangular objects will not appear correctly when exported
using CSS."
created by pooja2087 <https://forums.adobe.com/people/pooja2087> in
/InDesign EPUB/ - View the full discussion
<https://forums.adobe.com/message/6886892#6886892>

Colour Correction not exporting on clip

Similar Messages

Maybe you are looking for