Colour corrections not saving and not exporting

Am puzzled by something in FCE. I did a whole load of colour corrections, then saved and closed the project. Whenever I re-open the project, all the colour corrections are un-done. All other edits are unaffected. This happens repeatedly.
Also, after re-doing the colour corrections, saving and NOT closing, I exported the project to MPEG2. The colour corrections did not come through on the exported file.
My timeline is 3.5hrs long, and re-doing all these colour corrections is *time consuming*.
Please does anyone have any ideas what I'm doing wrong?
Any help appreciated.
iMac Mac OS X (10.4)

No.
If you have created some modified effects (eg. 3 second dissolve) and put them into your FCE Favoutites Bin, trashing the preferences will trash these. They can easily be re-created or save this Bin somewhere else and bring it back if that's the course of least resistance.
Al

Similar Messages

Excise invoice is not saving and not showing datas

in erxcise invoice i ve made settings as per the sap best practices then also the excise invoice is not saved and not generated also
please help me to solve the problem
the error is coming like this
Error in allocating Excise invoice number Interval not found Number object J_1IEXCLOC
Message no. 8I336
i ve already maintainthe number range for this object in tool in tax in goods moment
please give some better advice for the excise invoice setting.

Sub Transaction type determines the subcontracting attributes and determines the accounts for the posting while doing a sub contracting transaction.
Sub transaction type is also used for determining the accounts while
doing excise removals.
Within CIN the account determination is based on the transaction type.
So normally you can have a single set of accounts for Excise
utilization. In case you need alternate account determination for
handling various scenarios you can define sub transaction types. The
sub transaction types and corresponding account assignments needs to be
maintained in CIN customization
To make customization of Sub Transaction type, goto
SPRO --> Logistics General --> Tax on Goods Movements --> India --> Account Determination and check whether you have assigned second and third one, viz. "Specify Excise Accounts per Excise Transaction and Specify GL Accounts per Excise Transaction".
Check
Taxes on goods mvnt--indiaaccnt determination---specify excise accnts for excise transaction...maintain the sub transction type , ip or 01,
against the appropriate ETT
Message was edited by:
sam masker

Before when I scanned a photo, it would automatically save and ask to scan another photo. Now, the photo is not saving and it doesn't ask to scan again. Help?

Before when I scanned a photo, it would automatically save and ask to scan another photo. Now, the photo is not saving and it doesn't ask to scan again. Help?

What Scanner and scanware are you using....?
Check out > Mac Basics: Using a scanner
I only use Image Capture and it always sends my photos to wherever I tell it to.

Upon startup Firefox says "Proxy is refusing connections." When I select "Auto-Detect Proxy" from Advanced settings and solve problem, changes are not saved and upon next startup I must select again...!

Firefox 4 was working fine. Then one day, when I started up Firefox, it says "Proxy is refusing connections." I solved this by selecting "Auto-Detect Proxy" from Advanced network settings, but my changes are not saved and upon every start-up I must select it again! (I even completely removed my webroot antivirus protection, as it as hindering many proxy related programs, but this seems to not be the source of the problem)

You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
See also:
*http://kb.mozillazine.org/Preferences_not_saved

With 'Mail v8' and 'Yosemite' accounts settings are not saved and I keep having to check the "SSL" box

With 'Mail v8' and 'Yosemite' 'mail' "account settings" are not saved and I keep having to check the "SSL" box. This has only occurred since upgrade to Yosemite?
Any help would be appreciated as this is so frustrating!!

Update to 3.6.16 has fixed this problem.

My project was not saved and is now gone...where did it go?

Help
My project was not saved and is now gone...where did it go?

Check to see if Premiere autosaved your project. Open Premiere and start a new project.
File Menu > Project Settings > Scratch Disks
The last entry is 'Project Auto Saves'. See where this is pointing on your computer. If you are very lucky, Premiere may have autosaved your project from before and you'd be able to find it and open it that way.
Otherwise, you won't be able to recover a project that wasn't saved.

APs showing 'not associated' and 'not registered' in PI 2.1

I have got a weird issue in PI 2.1.0.0.87.
WiSM2, running on version 7.4.121.21, shows reachable and managed/synchronized in PI. However, the APs managed by it show 'controller IP->not associated' and 'not registered'. It is been confirmed that the SNMP/TELNET/HTTP creds are correct and all the APs in question are showing fully operational in WLC. When the user trying to delete the entry in PI, it always failed without any messages.
Any ideas why it happens?
Thanks!

Remove the controller and add again, see if the APs are reflected then
Troubleshoot using:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/1-2/user/guide/prime_infra_ug/troubleshootaps.html

Indesign cc files not saving but not giving an error message

Indesign CC files not saving but not giving an error message
I have all my restaurant menus in Indesign cc and when emailing them to myself, after changing them to print them from a different computer I experience that the files are not the most updated version.
Can anybody suggest a solution?
Thanks
Janine

Ask in the ID forum and provide at least some useful info like system specs, what's contained in the files, where they are stored...
Mylenium

DSC alarm set and cleared without operator ack - the variable should be not alarmed and not acked

We are deeply involved in porting our application from 7.1.1 to 8.6.1 under Windows XP.
Our application heavily depends on DSC and moving from 7.1.1 to 8.6.1 is actually much more than a simple porting....
here is our last problem:
it seems that there is no discrimination between 'active' alarms and 'acknowledged' alarms on a shared Variable in case the 'ack Type' is set to 'USER'.
Here is what happens:
1) a Boolean shared variable is defined to be alarmed when 'high' (TRUE) and its ack type is set to 'USER' (the operator at our application must ack alarms).
2) the Boolean var is set to TRUE -> it is declared alarmed (OK)  and not ack'ed (OK)
3) the operator ack the variable -> it is declared alarmed (OK)  and ack'ed (OK)
4) the Boolean var is set to FALSE -> it is declared not alarmed (OK)  and ack'ed (OK)
5) the Boolean var is set to TRUE -> it is declared alarmed (OK)  and not ack'ed (OK)
6) the Boolean var is set to FALSE -> it is declared alarmed (NOT OK!!!)  and not ack'ed (OK)
7) the operator ack the variable -> it is declared not alarmed (OK)  and ack'ed (OK)
This last case is the wrong situation: an alarm has been set and cleared without operator ack the variable should be not alarmed and not acked
Actually the variable returns OK only when ack'ed.
see the attached project in which a small vi and a small shared variable lvlib allows to repeat the above steps.
Note:
A) same situation applies to 'double' shared variable
B) under DSC version 7.1.1 everithing was OK
can anyone Help?
Thank You Guglielmo Rozera
Attachments:
AlmAckTest.zip ‏18 KB

Thank for your replay!
I have tried to undeploy and deploy the library with ack type set to 'User' by default, and then run the vi but the behavior is always the same.
The modification you suggest does not set 'User' ack type because data socket needs '2' as 'User ' setting while property node needs '1' or (better) its own enumerated type.
Anyway I've corrected the vi according to your suggestion and tried again but nothing changed...
Here I attach the project modified with property node and an indicator to show what is the actual ack type
I hope in your further investigations!
Thank You
Guglielmo
Attachments:
AlmAckTest_2.zip ‏20 KB

Not distributued and Not included issues.

We have a couple of issues with Not distributed and Not included issues. First, since they are commingled with our variances they do not get passed through to PA so we are off between GL and PA. Second, the not distributed are not part of inventory since they remain in the variance account.
Anyone have experience with these and any solutions for these issues?
SAP says we can turn off the price delimiter but we are uncertain as to the effect overall.
Anyway to isolate these to a different GL account posting?

Solution
 **'Not distributed' price differences can be due to three reasons:
 A) System applied a 'Price limiter' logic (stock coverage check).
 You can analyse this case using the value flow monitor transaction:
 - for release 4.7 , transaction CKMVFM
 - for release 4.6C, program SAPRCKM_VERIFY_PRICE_DET (note 324754 is required).
 - for release < 4.6C: Program ZVERIFY_PRICE_DET included in the note 324754 Or directly checking the field CKMLPP-PBPOPO manually.
 In this case, the value field CKMLPP-PBPOPO > cumulative inventory.
 If you still want these price differences to be distributed , you can switch off price limiter logic. Then all price differences are posted to stock, and the price difference account is cleared. You should decide
 for each material if you want to switch off price limiter logic or not.
 So you can achieve a compromise between realistic prices and clearing
 the balance of the price different account.
 Price limiter logic can be switched off in the following way:
Resetting the price limiter quantity:
 In release 4.7 this is done uising transaction CKMVFM.
 In release <= 46C using the ZREMOVE_PRICE_LIMITER (see note 325406).
Note 855387:
 Application of this note will create an additional selection parameter for step 'Single Level Price Determination' to switch on/off price limiter logic.
 This option is the better way, as it is faster provides more flexibility (see the note for more information).
 B) System applied a fallback strategy during price determination
 (see note 579216) to avoid a negative periodic unit price (PUP).
 Please check the attached note 579216:
 If the regularly calculated PUP (based on 'Cumulative Inventory' line) would become negative, the system uses a different strategy to calculate the PUP:
 The PUP is calculated with these priorities:
 1.'Cumulative Inventory' line (no fallback)
 2.Receipts ('ZU') line (Info message C+ 135 in the log)
 3.Beginning inventory ('AB') line (Info message C+ 135 in the log)
 4.PUP-price of previous period (Info message C+ 136 in the log)
 5.S-price (->(Info message C+ 137 in the log)
 The fallback strategy is active by default for Single-Level price determination.
 For multilevel price determination it must be activated with parameter 'Negative price: automatic error management'.
 As a solution, you might check the postings of these materials if they really need to have such big negative price differences or if there is some kind of error in the posting or the production structure
 If you find such errors, you might reverse the corresponding postings and report them in a correct way.
 Or, you might use transaction MR22 (debit/credit material) in order to post a small positive amount of differences to the concerned materials
 so that the resulting actual price would no longer be negative. Then you could perform the period closing (which you had to reverse before).
 In the next period, you might remove this manual posted value from the materials (again with MR22) in order to correct the overall stock values back to their original amounts.
 C) Due to a source code error with transaction CKMM.
 The above situation may be produced because transaction CKMM was executed during the corresponding period.
 When transaction CKMM is processed the system deletes the price differences for the material in the period and these differences are not longer in the period record tables.
 See note 384553 for further details.
 The fact is that the price differences are still visible in CKM3 (as not distributed). This is due to the missing reset of summarization records (MLCD).
 This error is just a problem of CKM3 display, because the differences shown as 'not distributed' do not exist in the periodic records. The PUP of the material is calculated correctly.
 This error is corrected by note 838989 for the future.

Not in and Not Exists

Hi everyone,
I need some explanation on why the index is not being used in one of my queries.
Here are the queries:
SELECT COUNT (1)
FROM (SELECT hdr.ALLOC_HDR_SEQ_NBR hdrnbr
FROM sm_vda_allocation_header hdr
INNER JOIN
sm_vda_type vdatype
ON hdr.vda_typ_cd = vdatype.vda_typ_cd
WHERE
vdatype.SAP_POST_TYP_CD = 'JE'
AND vdatype.vda_alloc_flg = 'Y'
AND hdr.vda_liab_flg IS NULL
AND hdr.sap_extrct_dt IS NULL
AND hdr.ALLOC_HDR_SEQ_NBR NOT IN
(SELECT alloc_hdr_seq_nbr
FROM sm_vda_allocation_detail));
return 0 rows.
explain plan::
Plan
SELECT STATEMENT CHOOSECost: 671 Bytes: 26 Cardinality: 1
     8 SORT AGGREGATE Bytes: 26 Cardinality: 1
          7 HASH JOIN Cost: 671 Bytes: 293,254 Cardinality: 11,279
               1 TABLE ACCESS FULL SM_APPL.SM_VDA_TYPE Cost: 5 Bytes: 56 Cardinality: 7
               6 MERGE JOIN ANTI Cost: 665 Bytes: 281,106 Cardinality: 15,617
                    3 TABLE ACCESS BY INDEX ROWID SM_APPL.SM_VDA_ALLOCATION_HEADER Cost: 496 Bytes: 241,860 Cardinality: 20,155
                         2 INDEX FULL SCAN UNIQUE SM_APPL.SM_VDA_ALLOCATION_HEADER_PK Cost: 438 Cardinality: 20,450
                    5 SORT UNIQUE Cost: 169 Bytes: 417,480 Cardinality: 69,580
                         4 INDEX FAST FULL SCAN NON-UNIQUE SM_APPL.SM_VDA_ALLOCATION_DETAIL_FK_I Cost: 86 Bytes: 417,480 Cardinality: 69,580
2nd query::
SELECT COUNT (1)
FROM (SELECT hdr.ALLOC_HDR_SEQ_NBR hdrnbr
FROM sm_vda_allocation_header hdr
INNER JOIN
sm_vda_type vdatype
ON hdr.vda_typ_cd = vdatype.vda_typ_cd
WHERE
vdatype.SAP_POST_TYP_CD = 'JE'
AND vdatype.vda_alloc_flg = 'Y'
AND hdr.vda_liab_flg IS NULL
AND hdr.sap_extrct_dt IS NULL
AND NOT exists
(SELECT 1
FROM sm_vda_allocation_detail b where
hdr.ALLOC_HDR_SEQ_NBR = b.ALLOC_HDR_SEQ_NBR));
explain plan:::
Plan
SELECT STATEMENT CHOOSECost: 831 Bytes: 20 Cardinality: 1
     6 SORT AGGREGATE Bytes: 20 Cardinality: 1
          5 FILTER
               3 HASH JOIN Cost: 828 Bytes: 14,560 Cardinality: 728
                    1 TABLE ACCESS FULL SM_APPL.SM_VDA_TYPE Cost: 5 Bytes: 56 Cardinality: 7
                    2 TABLE ACCESS FULL SM_APPL.SM_VDA_ALLOCATION_HEADER Cost: 822 Bytes: 12,096 Cardinality: 1,008
               4 INDEX RANGE SCAN NON-UNIQUE SM_APPL.SM_VDA_ALLOCATION_DETAIL_FK_I Cost: 3 Bytes: 90 Cardinality: 15
In the 2nd query with NOT EXISTS, I see FULL table scan for SM_APPL.SM_VDA_ALLOCATION_HEADER
In the first query, the index is used in the same place:
2 INDEX FULL SCAN UNIQUE SM_APPL.SM_VDA_ALLOCATION_HEADER_PK Cost: 438 Cardinality: 20,450
ALLOC_HDR_SEQ_NBR is a primary key column.
Actually NOT IN and NOT EXISTS both used index for the second inner table (SM_APPL.SM_VDA_ALLOCATION_DETAIL).
But NOT exists is not using the index for the first table but not in is using.
how come.

872605 wrote:
Hi everyone,
I need some explanation on why the index is not being used in one of my queries.
Here are the queries:
SELECT COUNT (1)
FROM (SELECT hdr.ALLOC_HDR_SEQ_NBR hdrnbr
FROM sm_vda_allocation_header hdr
INNER JOIN
sm_vda_type vdatype
ON hdr.vda_typ_cd = vdatype.vda_typ_cd
WHERE
vdatype.SAP_POST_TYP_CD = 'JE'
AND vdatype.vda_alloc_flg = 'Y'
AND hdr.vda_liab_flg IS NULL
AND hdr.sap_extrct_dt IS NULL
AND hdr.ALLOC_HDR_SEQ_NBR NOT IN
(SELECT alloc_hdr_seq_nbr
FROM sm_vda_allocation_detail));
return 0 rows.
explain plan::
Plan
SELECT STATEMENT CHOOSECost: 671 Bytes: 26 Cardinality: 1
     8 SORT AGGREGATE Bytes: 26 Cardinality: 1
          7 HASH JOIN Cost: 671 Bytes: 293,254 Cardinality: 11,279
               1 TABLE ACCESS FULL SM_APPL.SM_VDA_TYPE Cost: 5 Bytes: 56 Cardinality: 7
               6 MERGE JOIN ANTI Cost: 665 Bytes: 281,106 Cardinality: 15,617
                    3 TABLE ACCESS BY INDEX ROWID SM_APPL.SM_VDA_ALLOCATION_HEADER Cost: 496 Bytes: 241,860 Cardinality: 20,155
                         2 INDEX FULL SCAN UNIQUE SM_APPL.SM_VDA_ALLOCATION_HEADER_PK Cost: 438 Cardinality: 20,450
                    5 SORT UNIQUE Cost: 169 Bytes: 417,480 Cardinality: 69,580
                         4 INDEX FAST FULL SCAN NON-UNIQUE SM_APPL.SM_VDA_ALLOCATION_DETAIL_FK_I Cost: 86 Bytes: 417,480 Cardinality: 69,580
2nd query::
SELECT COUNT (1)
FROM (SELECT hdr.ALLOC_HDR_SEQ_NBR hdrnbr
FROM sm_vda_allocation_header hdr
INNER JOIN
sm_vda_type vdatype
ON hdr.vda_typ_cd = vdatype.vda_typ_cd
WHERE
vdatype.SAP_POST_TYP_CD = 'JE'
AND vdatype.vda_alloc_flg = 'Y'
AND hdr.vda_liab_flg IS NULL
AND hdr.sap_extrct_dt IS NULL
AND NOT exists
(SELECT 1
FROM sm_vda_allocation_detail b where
hdr.ALLOC_HDR_SEQ_NBR = b.ALLOC_HDR_SEQ_NBR));
explain plan:::
Plan
SELECT STATEMENT CHOOSECost: 831 Bytes: 20 Cardinality: 1
     6 SORT AGGREGATE Bytes: 20 Cardinality: 1
          5 FILTER
               3 HASH JOIN Cost: 828 Bytes: 14,560 Cardinality: 728
                    1 TABLE ACCESS FULL SM_APPL.SM_VDA_TYPE Cost: 5 Bytes: 56 Cardinality: 7
                    2 TABLE ACCESS FULL SM_APPL.SM_VDA_ALLOCATION_HEADER Cost: 822 Bytes: 12,096 Cardinality: 1,008
               4 INDEX RANGE SCAN NON-UNIQUE SM_APPL.SM_VDA_ALLOCATION_DETAIL_FK_I Cost: 3 Bytes: 90 Cardinality: 15
In the 2nd query with NOT EXISTS, I see FULL table scan for SM_APPL.SM_VDA_ALLOCATION_HEADER
In the first query, the index is used in the same place:
2 INDEX FULL SCAN UNIQUE SM_APPL.SM_VDA_ALLOCATION_HEADER_PK Cost: 438 Cardinality: 20,450
ALLOC_HDR_SEQ_NBR is a primary key column.
Actually NOT IN and NOT EXISTS both used index for the second inner table (SM_APPL.SM_VDA_ALLOCATION_DETAIL).
But NOT exists is not using the index for the first table but not in is using.
how come.WHY MY INDEX IS NOT BEING USED
http://communities.bmc.com/communities/docs/DOC-10031
http://searchoracle.techtarget.com/tip/Why-isn-t-my-index-getting-used
http://www.orafaq.com/tuningguide/not%20using%20index.html

HT1766 # is not working in my iphone 4s, when i want to see how much credit i have in iphone, i need to put # on that, than it calls and end, it is not working and not showing anything..

# is not working in my iphone 4s, when i want to see how much credit i have in iphone, i need to put # on that, than it calls and end, it is not working and not showing anything..

http://support.apple.com/kb/HT1848 Did you transfer your purchased item, take a look at the link

IPod stuck in "do not disconnect" and NOT recognized by iTunes

I updated to 7.1.1.... and my iPod is not stuck in "do Not disconnect" and not recognized by iTunes.
I have tried the Toshiba "Safely Remove Hardware" -- and selecting the iPOD -- but, notice comes back "cannot disconnect now because a program is accessing the device."
Anyone know where I can go from here??? Thanks very much.

the same thing happened to me yesterday after downloading the new itunes 7.1.1 the do not dissconnect would'nt go off and computer and itunes would'nt reconize my ipod video.
so i left it alone overnight to empty battery completely.
the do not disconnect was gone in the morning then i recharged it and plugged it back in to computer and everything is fine. i don't know why it froze on me.
my husbands ipod mini had a similar problem awhile back and i did the same and it also was fine.

My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this

My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this?

a friend told me that he wants my os x cd for my macbook pro to upgrade his imac.
The discs that come with your Mac are "machine specfic" and cannot be used on another Mac.

TS1398 when i update my software to 6.1.3(10B329)to I phone 4s the wifi is not working and not auto join the network that i have already connected to

when i update my software to 6.1.3(10B329)to I phone 4s the wifi is not working and not auto join the network that i have already connected to

First, grow up. Just because YOUR phone isn't working, doesn't mean Apple put out bad software. I've not had any difficulty, nor has anyone else I know. And just how is Apple risking lives with Bluetooth kits not working? It's YOUR decision to talk on the phone or text and drive. Not Apple's.
We're users here, volunteering our time to help others. Posts like yours, which are whiny and ranting, simply means we're likely to ignore you and not provide you with any help. Not to mention, it makes you look absolutely foolish.
Further making you look foolish is the fact that you haven't even asked a technical support question, nor have you provided anyone here with any troubleshooting steps you might have taken, including those recommended in the user guide.
Good luck getting help.
GDG

Colour corrections not saving and not exporting

Similar Messages

Maybe you are looking for