Colour in prints is quite different from screen.

Using C6180 printer and photoshop Elements, the colour of the prints is much too strong. These are from photos of my paintings, so colour accuracy is vital. I have lightened a lot onscreen, and reduced contrast, so they look reasonably close, but the saturation in print is far too high. Settings for printer, application managed colour, in Elements, no colour management. What next, please?

The iOS is adjusted for each type of hardware. That's not user changeable.

Similar Messages

NIKON D5000 NEF - Lightroom 2.6 and PSE show colors quite differently from what Nikon Software show

With my Nikon D5000 DSLR camera, I took recently photos from small blue flowers. I had set-up my Nikon D5000 to create for every photo both a NEF File and a JPEG File (and had set my camera to use Automatic While Balance).
I noticed that for NEF Files Lightroom 2.6 (and also PSE 7, that uses internally Camera RAW ) shows me the blue colors of the flowers quite differently from what I see with PSE for the jpeg file. It is my impression, that it is in the Jpeg files, that the blue color is close to the reality; and that it is with the NEF Files that Lightroom and PSE show a blue color that is quite different from the reality.
I also looked at the photo files with the NIKON "View Nx" 1.3.0 Software that came with my camera. With "View Nx" the blue colors (both with the NEF file and the Jpeg File) are very vlose that what i see with PSE 7 in the jpeg file (and quite different from what I see with LR and PSE for the .NEF File).
I mentioned this problem to Nikon Support. They suggested, that Nikon Software and Adobe software use different algorithms; and that the Nikon algorithms are better/closer adapted to the Nikon cameras than the more generalized Adobe algorithms that need to support a very large number of cameras.
But ....it is Lightroom that i wish to use to process my NEF Files and PSE that I wish to use to organize my Photos. Can a LR/Camera-RAW expert help me? I would like to find a solution to see with LR and with PSE in my D5000 NEF Photo Files blue colors that are close to the reality and close to what Nikon Software shows me on my PC. Please notice that I am very far away from being a professional and that i will probably not understand complicated explanations.
Thanks a lot in advance.
An additional note, that is perhaps not relevant: I used LR to convert my NEF File into a JPEG File format and looked at the blue in the result. It looks the same as what LR and PSE show me for the .NEF File (and looks different from the jpeg file crreated by the NIKON camera).

EJ and Jim
Thank You very much for your useful feedback.
I realize, that as a neophit I am an exot among the community of photo-experts and photo-professionals addressed by LR. Therefore the wish that I will now express is perhaps inadequate. But since it is gently, that i express this wish, I am probably allowed to do so......
My wish for a future version of LR, is that LR comes out of the box with a "reasonable" interpretation of the RAW images of most important/widespread modern cameras....without requiring that non-experts like me gets confronted from the very beginning with the need to develop their own default settings.
For this wish, I will formulate a Feature Request.
You might wonder, why a non-expert like me is interested in LR instead of using those Photo-Editing Software (e.g. PSE) that are supposed to address the need of non-experts. Well..... I am coming from the PSE world. I am reasolnably happy with the PSE Organizer....but I hate the complex, inefficient, unfriendli "user-interface" (experts will probably tell: workflow-interface?) of the PSE Editor. Its really a last-century Software. LR is so much more friendly, even for non-experts...within the Library Module, i do not need to switch back and forth between one dialogue-window for each type of change.... nearly all what i need is in that one right-hand pane of the Library module.
I honestly believe, that Adobe should take a serious look at promoting/marketing LR also to the audience of non-experts. That would be a good and attractive additional marketing opportunity for LR.

Print layout is different from the working view.

I got two calendars in iCal, marked with red and green. I always make the green ones as the first one on everyday and the red ones as the second. However, when I printed the scheduled month, some red ones were in the upper positions and it looked different from my screen.
How can I make all the green ones as the first event in the printed version.

You can make objects visible only on the screen by selecting Object => Presence => Visible (Screen Only). You can do the same for printing by selecting the Visible (Print Only) option.
Hope this helps,
Mike

Print preview is different from print in scripts

Hi,
i am having issue in alignment of sap script .i have adjusted my form output based on print preview .but when i am taking the output i am having alignment issue .Not only that there are some missing column boundaries in printout.
Now i cant make alignment based on printout because i am having 12 column in output and its difficult to take printout everytime i check for alignment.

Hi,
Please check whether the printer name is same in preview and printout generally we are checking the preview
on our windows printer(LOCL) where as your client may cheak the printouts in some other printer in your print
preview also please change the printer what he is using for printouts.
Some times margins may cut due to the settings in the printer we must maintain some space for borders.
Coming to your allignment point the space for spaces and fonts it may vary from printer to printer so
create multiple windows to design the text in the pattern you exactly required instead
everything in one single window or atleast write them in different lines and if possible avoid any spaces are there
before your text.
Thnaks,
Phani.

Hp smart web printing: font is different from the one on internet page and hardly readable

there is no space between etters in the printout which makes the text hard to read.
How can I overcome this problem?
System: XP
Printer: HP laserjet P2055d
Internet Explorer 8

In IE8 on the lowest toolbar, to the right hand side is a "tools" pull down. Click on it, then select "Explorer Bars", you should see one called "HP Smart Web Printing". If you do and it does not have a check by it, simply click on that option. An SWP toolbar should appear. If you do not have thswp line I would suspect an installation problem.

Printing calendar of dates from Appleworks database

Is there a calendar program that will print a monthly calendar and pull birthdays and anniversaries from an appleworks database file (or from a bento file)? This is much like mailmerge does, except I want the calendar date to pull all records with that date as a birthday or anniversary.

aminor wrote:
Is there a calendar program that will print a monthly calendar and pull birthdays and anniversaries from an appleworks database file (or from a bento file)? This is much like mailmerge does, except I want the calendar date to pull all records with that date as a birthday or anniversary.
Actually, it's quite different from a mail merge, and quite a bit more complicated.
A mail merge inserts data from a specific field into a specific location a word processor document, and produces a separate document for each visible record in the database.
Using the AppleWorks database, you could get separate lists of anniversaries and birthdays for a single month, then use cut and paste to transfer those into a (spreadsheet) calendar either one at a time or collectively as a list below the calendar grid.
I see a few issues that may arise with long names and multiple b'days/annivs on the same date.
Post a reply if you want to pursue this.
Regards,
Barry

Email notification different from actual post

Something I just noticed and am wondering about. Recently I have received some email notifications that are quite different from what is actually posted on the thread. In one, the link was different and there was some differences in wording. In another, there was more text in the post than there was on the email. This seems different from what I am accustomed to seeing, which would often be edited versions of the same post. It seems like the email is an earlier version of the post, but I can't be sure. It has sparked my curiosity, and I am just wondering why this is happening. Has anybody else noticed this?

S.U.,
As Miriam states, unchecking the edit box will cause the reply to not have that info.
I, like Miriam, will occasionally uncheck the edit box but in my case it usually has to do with the fact that I have edited the post more than once and found that if I don't uncheck the edit box on successive edits there will be a long string of edited text below the post. Just cleans up the post a bit. I too, have been guilty of vanity in editing, as I'm sure that most are here.....after all, aren't we all perfect typists here?
littleshoulders

Colours in result vastly different from preview

I've just installed the latest Photoshop CC. Whenever I go to Image → Adjustments → Anything, the result turns out to be completely different from what I see in the preview. For example, when I use Hue to colourize a picture:
If I do the same using the corresponding adjustments layer, I get the same result as in the preview on the screen, but as soon as I save the picture to a non-psd format, the colours are off again.
It is impossible to work like that. Do you have any idea why this happens? I should note that I work in the standard RGB mode, and the "Proof Colors" option is disabled (but if I enable it, the results are the same).

Well, I construed "preview" to stand for Apple's Preview Application. Not my bad this time, but yours.
Next time, please provide a lot more details when you post:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

How can we take the cursor to a different sub-screen from the BADI?

Hi,
We have to do some validation on Header, Operation and Relationship of any work order (IW31, IW32). We have checked that validations can be done at BADI WORKORDER_UPDATE in the method u2018AT_SAVEu2019. But user wants us to take the Cursor back to the field and screen due to which the error is coming. How can we take the cursor to a different sub-screen from the BADI?
Thanks in Advance,
Pranav

You 'ran out of room' because you tried to put your entire question into what is the 'Topic line' of the post.
This is a fairly common error, as a scan of the topic list will show, and likely due to a design flaw in the layout of the composition page.
Most posters who make this error do so on their first post, and are able to avoid a similar misstep on their second and subsequent questions.
Regards,
Barry

AP Check Print: Same PDF O/P prints differently from Different Printers

hi ,
I am working on AP Check Printing. We are upgrading our system from 11i to R12.1.3.
I have developed the Check Template for a US Check, the PDF output generated from the "Format Payments Instructions" look good and prints perfectly onto one printer.
But when i print the same o/p to a different printer, it is cutting off all the edges.
I have verified that both the Printers use Universal Pasta Configuration & the same past_pdf.cfg file.
It has "Prepocess = pdftops - paper match {outfile} {infile}" as the command to convert PDF output file into a PS (Post Script).
I am able to reproduce the problem by printing the PS file from unix using the command "lp - d <printername> <PS File Name>".
Please advice ASAP, this is a BLOCKER issue for us and need to solve this at the earliest.
Thanks in Advance.
VIJAY

Hi,
Thanks a bunch for your quick response.
In order to check the driver, i have seen in the following areas.
System Admin => Install => Printers => Register /Type /Style / DRIVER.
The driver postion is actually depending on the print style like "PDF Publisher" or "Portrait For Logo" etc.
Is this the place you want me to check ? or is there anything else i am missing ?
Thanks,
Vijay

Print behaviour different from 'Print Preview' in PM Order

Hi gurus,
We have a requirement to check a user status at the Operation level before a print can be triggered from a PM Order in IW32. After changing the code to satisfy the requirement at the print program level, we are able to prevent the print if the user status is not set, when the user clicks the Print Preview button. However, if the user clicks the Print button, the header system status is being set to PRT, though the print program prevents the print from being output. After debugging, we found that the behaviour of the standard SAP ABAP code is different for Print compared to Print Preview.
Looking at the userexits "IWO1*", we weren't able to identify a suitable one that allows one to make this check before a print is triggered.
Have anyone come across this / a similar problem ? Is there a solution ? Any ideas ??
Cheers,
Ashok.

Hi Narasimhan,
Yes, your guess is correct. We have tried out the possibility of controlling the print from the user status configuration side of things, but as the user status is at an Operation level, the system status at the header level still gets set, confusing the user that a print was created.
Any other ideas / alternates ?
Cheers,
Ashok.

Dialog Programing: Output screen layout is different from actaul layout

Hi,
I have developed screen layout in SE51 and same is used in my program.Program is working fine but the problem is in column order.I designed layout in SE51 by copying structure from ABAP dictionary and same has been used in my program but output layout column order is completely different from SE51 screen layout.When i check this on Se51,everything is in order.
My program is referring the same screen number and program.there is only one screen i.e 100.
How do we fix this problem.
Regards,

Looks like, your table settings got changed for the table control on the screen.
Run your program.
Now, on the screen you can find out the "Table Settings" in the Top Right corner of the Table control as ICON.
Press the Icon and it will bring the Table Settings screen.
In the Current Settings, choose the Basic Settings ... save and close.
Regards,
Naimesh Patel

How do I configure my iPhone to show different colours for my two calendars both from separate email accounts, both Exchange.

How do I configure my iPhone to show different colours for my two calendars both from separate email accounts, both Exchange.

It does so by default... what's the issue?

How do you prevent HP Deskjet IA 4615 printer from using colour to print black!!!!????

I just recently bought this great All-in-One HP DeskJet IA 4615 as I've needed all the other functions besides printing for a while now. Imagine my horror when trying to specifically save on using colour when printing a newsletter to about 900 clients by putting elements of colour into a predominately black design...and then wondering why all the colours are going down so fast...then discovering that the printer is USING THE COLOURS TO PRINT BLACK!!!!
I have looked all over for switching this off...but haven't been able to find the answer?
Is this standard?
In that case I'm EXTREMELY disappointed to find that HP uses this tactic to get you to use ALL the colour cartridges!!!
Please, if anyone has the answer for me...let me know!!!!
This is NOT a great way to find out you can't save ink no matter what you do! I hope one can...redeem my love for HP, PLEASE!

Hey MarleMac,
What is the Operating System of the computer you are using the Deskjet Ink Advantage 4615 with?
If you are using a Windows PC, then open the Devices and Printers folder. Right click on the printer and select Printing Preferences. If you want to print a black and white document using black ink only, click the Advanced button. From the Print in Grayscale drop-down menu select Black Ink Only, then click the OK button.
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Is there a way to "print" a raster image to a size differing from the artboard, just as w/vectors?

when you print from illustrator you can specify to fit a paper size
that's different from the artboard being used. I want raster images that differ in size from the artboard - is this
possible? Or would figuring out the pixels based on a dpi and a sheet size be the equivalent?

I'm not clear what you describe. Sounds to me like you are confusing the rasterization on the printer/ in the printer driver with actually resizing. All that happens when you fit content on a page for printing is to change the overall ratio of paper vs. content vs. rasterization grid and that is a mere technical thing. Works for vectors and bitmaps. however, AI having a track record of being extremely picky about what it prints, you'd probably do better saving a PDF and printing from Acrobat.
Mylenium

Colour in prints is quite different from screen.

Similar Messages

Maybe you are looking for