Colour is to bright and lines across pages

Hi, I have new ink cartridges in (replaced because of this problem) but every time i print the colours are all wrong (bright yellow grass etc) and there are lines running through the photos. I have done a basic, intermediate and prime clean, i have also done the basic fixes (print quality thing and cartridge alinment, Also bought expensive photo paper and it is still bad.
My warrenty ran out 3 weeks ago.
Any help please

Please read this post then provide some details. What printer model? What operating system?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

How to keep together Title + table's line across pages

Hi all, I have a question.
I'm trying to create a .rtf template where I have a table with 4 lines and a title <PROJ_NAME>
I need to repeat this table (with all the necessary information - 4 lines) as many times as the projects' names are stored on the DB.
For example: if the employee has 4 projects, on the report I will see 4 times these table and the relative project name as title.
So, the repeating group mechanism works perfectly, but I am not able to control how the table's lines are splitted across pages....
In other words if I have two pages in my .rtf template and I am at the end of the first page:
1) I don't want to see the title on the bottom of the first page and the relative table above on the second page (title and table splitted on two differents pages)
2) I don't want to see the title and a portion of the table on the bottom of the first page and the rest of the table (1,2 or 3 lines) above on the second page (table splitted on two differents pages)
At the end I'd like to see always title and table together even if the page finishes. If the title + table exced the table's vertical border, it has not be splitted, but rewrite entirely (title + table) on the next page.
The syntax is this:
<?for-each-group:G_PROJ;./PROJ_NAME?><?PROJ_NAME?>
TABLE WITH 4 LINES
<?end for-each-group?>Page break
I tried also, reading the forum, to use the paragraph properties (Keep lines together), but nothing.....
Anyone can suggest me something ?
Thanks in advance
Alex

After the for loop,
take a table (suppose A) with one row and one column. In that table insert the Project name tag. Below that tag, insert an inner table(suppose B) in table A with 4 rows and columns you wish. Now select the outer table A(select the whole table), and in the table properties/Row , in the options , uncheck the 'Allow row to break across pages' property.
end the for loop.

Reader X prints black line across page 1

Just started using Adobe Reader X, which I really like. However, it will not print properly, and puts a couple dark black lines across the page.
Any help would be appreciated.

Use the forum for Adobe Reader.

Gost and lines across

I made a QT 1minute clip in FCP 5.14
On the Apple is excellent, om windows that clip shows ghosting around bright color and vertical lines.
If I convert to WMV or AVI the same clip is playing perfectly.
Its the QT 7.15
Is there an adjustment? I couldn't find it.
thanks.

It did not help any. BTW I have 3 Windows based computers , and its the same problem on all of them. Some people don't notice it but who is a professional can tell the problem right away.
The edges are jagged, color bleed, vertical lines
Thank for trying to help.

Screen has black/dead pixels and line across screen.

My iphone is still under its one year warranty. I can not recall any drops or it ever being handled roughly, however I have a black/gray blob of dead pixels in the left corner and my screen has a shiny line that looks like a crack of the LCD, however the glass screen is not cracked in any way that I can tell. I think the dead pixels are spreading as well. Has this happened to anyone else? Does anyone know if this is under warranty? I live over an hour and a half from the nearest apple store so I really don't want to take a special trip to see a genius only to find out that I will have to pay $200 to get this fixed. Any help/advice would be greatly appreciated!

If it is still under warranty, they should replace the screen without charging you. The same thing happened to me a few months ago and they replaced it for free. You might have to make the long trip to the store but they shouldn't charge you and it will take about 30 minutes. Call to make an appointment first if you plan to go to the apple store.

Green Squares and Lines Across Screen

Recently there have been a few green squares appearing on my screen at random times. Today more than usual appeared, my computer froze and they would not go away even after restarting three times. I only manged to get rid of them after reinstalling Leopard.
Does anyone have any idea what the problem could be?

The impending death of the video card.

Colours different on object and inspector

Hi,
For most colours, there seems to be a subtle difference in the appearance of the fill colour of an object, and the colour for the object shown in the inspector/colour chooser. The object shown on the page has more saturation or brightness than in the floating palettes.
This is immediately noticeable to me on the default green colour for a new object from the toolbar menu (eg. a new circle). In fact, if I click the magnifying glass on the colour palette and click my object, even though they're meant to be the same colour, both the inspector and object change colour slightly, proving that it's not just my eyes. I can repeat this again and again on the object of default green fill until the object is bright green (green starts on 183 of RGB and ends up on 255.)
The problem is the same with text and lines in Pages, but this does not happen in TextEdit. Text copied directly from TextEdit into Pages has a slightly different color.
Does anyone else experience this? Any fixes?
Thanks

This was brought up in the Keynote forum quite some time ago, compllete with a handy demonstration by Kyn.
I would suggest sending feedback and seeing if it shows up in keynote too. If it doesn't then it was a missed fix in color handling that was not forwarded to the Pages team.

HT4641 after modifying a document in Pages I found that there are horizontal lines across every line break when opened and saved it in DropBox. Does anyone know why?

after modifying a document in Pages ON MY IPAD AIR I found that there are horizontal lines across every line break when opened and saved it in DropBox. Does anyone know why?

Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
Thanks for your help; hope this wasn't extremely long.

My IP7250 is suddenly printing a bright horizontal line at the start of the page and a dark horizont

My IP7250 is suddenly printing a bright horizontal line at the start of the page and a dark horizontal line at the end.
Every time the lines are printing in the exact same place.
it happens mostly when prining involves blue colors.
the line are approx. 1 cm wide.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Dropped my iPhone 4s and now there are lines across the screen?! Help!

Hey everyone!
So, I have recently dropped my iPhone 4S and now there are all these blue vertical lines across the screen, which occasionally change colour also.
I am still able to receive messages and calls, and siri still works, it's simply that I can't see a single thing I am doing- which is very difficult!
I was wondering if this is an issue that needs to be fixed at an Apple store- and if so, how much it would cost? Or if I would be able to fix it myself somehow.
N.B: I've tried to reset it, it doesn't work. I have also tried to restore the iPhone, but iTunes won't let me do this as I have to have the 'find my iPhone' app turned off, which I cannot do because I can't see anything I'm doing!
Thanks in advance for any help/suggestions,
Kirstoodles.

Kirstoodles wrote:
I was wondering if this is an issue that needs to be fixed at an Apple store- and if so, how much it would cost?
Yes. It's broken. A replacement will cost you $199.
Or if I would be able to fix it myself somehow.
The iPhone is not user servicable. Apple does not sell parts for the iPhone. any parts you could get are either stolen, counterfeit, or salvaged. Atempting to fix it yourself will render it unsupportable and forfeit your right to service from Apple, including an out of warranty replacement.

Colored and white lines across iPad screen

Ok so I got home from work and I pulled my iPad out of my laptop bag and I noticed that when I turn it on there are like these colored lines and also this big white bar across the screen. Why are those things there?
http://www.flickr.com/photos/53513466@N03/4946889384/

My son bought the original ipad in November 2010, it is now only a few weeks out of warranty. He turned it on tonight and as other people have mentioned on this forum the ipad now has coloured lines across the screen. I called customer services and I must say i am extrememly disappointed with the response I got. They offered me a replacement for £260..... no other explanation other than it may be a hardware problem. After paying £600 for the original ipad only just over a year ago I would expect better from Apple. Myself, my husband and my three children all have iphones and other apple products but I must say if this is the support you get then I would consider other options in the future. Very disappointing....... If anyone else other than a customer service agent who reads from a script can help then please get in touch. Thanks

How do I fix lines across the screen while on web pages?

I am getting lines across the screen on my Mac Book Pro. This is while I am on a web page. How do I fix this?

Those don't look like classic signs of hardware issues.
Of greater concern, I notice that you have both Trend Micro and MacKeeper installed. It's generally a bad idea to have two different anti-virus programs installed at the same time, as any active scanning each does can conflict with the other.
MacKeeper is very bad software, made by unethical developers in Russia. You should uninstall it immediately. See:
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
As for Trend Micro, note that its detection of Mac malware is not particularly good. See:
http://www.thesafemac.com/mac-anti-virus-testing-01-2013/
I would recommend uninstalling it as well. You should find an uninstaller in the Trend Micro folder in your Applications folder. If uninstalling all your anti-virus software makes you nervous, see my Mac Malware Guide. If you decide to install some other anti-virus software, use one recommended by that guide.
Back to the line problem, if uninstalling those programs doesn't help, try some browser other than Chrome (like Safari). Do you see the same problem there, or is it only happening with Chrome?

When I try to print a web page, all I get is one line across top of page.

When I try to print a web page in Firefox, the only thing that prints is a single line across the very top of the page. I can sometimes highlight and print my selection, but now that has stopped working.

I did not have the HP printer software for Mac OSX installed properly. Once installed the problem went away.

A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touchscreen not working plus there are blured lines across the screen and I can't see anything that it displays. Now when I try too connect my iPhone 4 t

A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touch screen not working plus there are blurred lines across the screen and I can't see anything that it displays.
Now when I try too connect my iPhone 4 to iTunes on my computer at home an error message comes up saying that I have to unlock my iPhone 4 for it to communicate to my device.
But the problem is that I can't unlock my iPhone 4 because I'm unable to see the key pad and my touch screen no longer responds when I touch it.
I just want to reset my iPhone 4 back to its Factory Settings & start all over from the beginning.
How can I unlock my iPhone 4 with iTunes on my computer or any other option you suggest me trying.
Thank you in advance,
SiHero

If you have had a "local guy "repair your iphone you will not get any support from Apple for warranty OR post warranty
If Verizon return it to Apple it wil not be handled by Apple
If Verizon also use unauthorised repairers you may be lucky
(Apple do not sell parts to local guys or anyone else )

Hi, I'd like to put a black and white effect on my colour footage which will look really sharp but which also looks bright so the whites look bright and the blacks look very dark . Any tips of which best effects to use to achieve this look in Prem Pro. Th

Hi, I'd like to put a black and white effect on my colour footage which will look really sharp but which also looks bright so the whites look bright and the blacks look very dark . Any tips of which best effects to use to achieve this look in Prem Pro. Thanks

Under the Effects-Lumetri Looks-Desaturation choose a B and W effect. Then add the luma corrector from the Video effects-colour correction section. Adjust the brightness and contrast to get the effect you want.

Colour is to bright and lines across pages

Similar Messages

Maybe you are looking for