Colour / lighting variation with Nick Software
I had this issue with LR 3 and still with LR 4. Let me explain :
When opening these Nick plugins from LR, the colour and the lighting are somewhat different (darker, more saturation).
I checked and it is not a profile issue. I use RVB on my SLR and then also when I export to Nick from LR.
If I do the same from Photoshop, no issue. Nick opens with the same picture 100%.
So I end up , going from LR to Photoshop (no problem at all), and then opening the picture with Nick.
Anyone had the same issue and found a fix ?
I had this issue with LR 3 and still with LR 4. Let me explain :
When opening these Nick plugins from LR, the colour and the lighting are somewhat different (darker, more saturation).
I checked and it is not a profile issue. I use RVB on my SLR and then also when I export to Nick from LR.
If I do the same from Photoshop, no issue. Nick opens with the same picture 100%.
So I end up , going from LR to Photoshop (no problem at all), and then opening the picture with Nick.
Anyone had the same issue and found a fix ?
Similar Messages
-
I am doing a project where I have this array which has different voltage outputs for each grid. How do I create a front panel object that lights up with different colours depending on the voltage input or is there already such a pre-built function?
In addition, I wish to display these in an array on screen. Is there any pre-built function for this?Repulse wrote:
I am doing a project where I have this array which has different voltage outputs for each grid. How do I create a front panel object that lights up with different colours depending on the voltage input or is there already such a pre-built function?
The simplest way would be an intensity graph. It gives you a 2D grid where each grid point is colored according to the value of a 2D array. The Z axis color ramp determines the color.
My second choice would be an array of colorboxes. (They could even be made to look like LEDs (see image, if course you can leave them square too), All you need is a scaling function thap maps voltages into a color ramp lookup table with an 8bit index)
(Using booleans and color property nodes is relatively clumsy. Booleans are meant for two states because the value is boolean. Since array elements can only differ in value, and not in properties, it will not even work. Color boxes have a color data type which is much more appropriate for this case)
LabVIEW Champion . Do more with less code and in less time . -
I think I need help with driver (software) settings for D110a
I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05) -
my iphone lights up with the apple icon then says ios6 then says connect to i tunes but can not get passed that
iTunes: Restoring iOS software - http://support.apple.com/kb/ht1414.
iPhone Troubleshooting Assistant - http://www.apple.com/support/iphone/troubleshooting/. -
My iPhone 3Gs is now no longer a recognised device on iTunes after I downloaded the new iTunes with iCloud software, but it does recognise my iPad2??
I run both Mac and a PC and have iTunes on both, which has previously recognised my iPhone. I had updated my Mac with the new iTunes software with iCloud and updated my iPad2 just yesterday. I then wanted to do the same with my iPhone today, but my Mac wouldn't recognise the device so I tried it on my PC, which recognised the phone but told me I needed to update my iTunes and this in turn wanted to update my iPhone software. After completing all this and restarting, my iPhone now shows the iTunes icon with the USB plug pointing towards it, obviously wanting me to plug it in to my computer to re-connect with iTunes, but now neither of my computers recognise my iPhone and my PC states an 'Unknown Device'. My Mac doesn't even see it. Can anyone help as I really need to get my phone working?? ThanksHold down the Home and Power button for 20 seconds. And try to update again.
Also read and follow this:
http://www.apple.com/support/iphone/assistant/restore/ -
I have a mac mini with an i7 dual core processor. It is perceptably slower than my macbook pro with a quad core i7. Does the mac mini server have the same hardware configuation as the regular mac mini with server software or is the hardware different (aside from the i7 quad core and dual hard drives)? I want a mini with a quad core i7...
Your assumption is correct. The server does however only
have the Intel HD3000 graphics like the base model with
no option, at this time, for the discrete graphics chip. So,
depending on what you are using it for, that could be a deal
breaker. Remember that your MBP does have a discrete
graphics chip.
I have a 2011 Mini Server connected to a Thunderbolt display
that gets used as an engineering workstation and general
personal use (some photo editing, LP restoraton, general
internet browsing). You simply just not enable any of the
server services. I find the combination to work quite well
for my purposes. I also have a 13" 2.7 GHz i7 Macbook Pro
which is pretty much strictly for work. As far as CPU
power it is pretty much equivelent to your Mini. For the most
part I find the Mini does outperfom my MBP. I heavily use
Parallels and Windows7 virtual machines, so the more cores
the better.
So, If you do a lot of CPU intensive stuff that is multithreaded,
the Server may help. If it is graphics intensive and your software
heavily leaverages the GPU, you may actually take a hit on
performance. -
Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!!Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!! -
I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David -
How do multiple users with multiple devices share one computer with iTunes software to back up multiple devices and individual iTune libraries?
Hi Goodguy147,
Welcome to the Support Communities!
The easiest way to have multiple users with multiple devices share a single computer is to create a User Account on your Windows PC for each person. Each person should also have a unique Apple ID. That will keep each individual's iTunes Library separate from the others and each individual can associate and backup several devices to their iTunes library.
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
The article below is a troubleshooting article for Windows. I'm just quoting the section from it that explains how to create user accounts:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717?viewlocale=nl_nl
Follow the steps below to create a new user account in Windows Vista or Windows 7:
Choose Start > Control Panel.
Open "Add or remove user accounts." (If you're using the Classic view in Windows Vista, open "User Accounts," and then open "Manage another account.")
Select "Create a new account" and follow the instructions to set up the account.
Once you create the new account, choose Start > Log Off.
Log in to the new user account.
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
I hope this information helps ....
- Judy -
My hard drive had to be recently reinstalled (5 days ago) with the software being 100% totally new, and totally up to date.
I therefore do not have iwork 09 which was purchased as a family pack (via download). How can I download it again without purchasing, and reactivate iwork09? It does not show up in my App store under purchases, as it was purchased a few years ago.It has always been very basic to always maintain a backup copy of your computer for just such an occasion. Use your backup copy to put everything back.
You can transfer itunes purchases fom an iphone: Without syncing : File Transfer Purchases
or you can redownload them. Open itunes store, click Purchased, under Quick Links. -
How can I change the itunes store from Swiss to the Italian one on my ipad2 with new software ios6? Thanks
See More Like This to the right of this post!
-
I have a PowerShot SX10 IS with no software. Do I NEED the original 37.1 version?
I have a PowerShot SX10 IS with no software. I found lots of versions of digital camera solution cd's on ebay. Do I HAVE to use the original version that came with the camera or can I use a different version? The main program I want to use is Photo Stitch. Thanks ~Jes
You can use any version, but there is a workaround that you don't need to original CD to install Photostich software which is free on Canon site.
Instruction is here: http://www.northlight-images.co.uk/article_pages/install_canon_software.html
Weekend Travelers Blog | Eastern Sierra Fall Color Guide -
Help! My display driver is no longer compatible with Adobe software!
Help! I rely on Adobe CC and my iMac to earn my living. My display driver is no longer compatible with Adobe software! What should I do? (most affordably because I dont have enough money for even basic living expenses right now.) Detailed notes are below but in a nutshell, I have a NVIDIA GeForce 8800 GS display driver. Adobe no longer supports it and disables the software functions depending on the graphics hardware. It recommends I check the manufacturer's website for the latest software. I did but only found firmware update for a different type of display driver for my early 2008 iMac. What should I do??! Please help me solve this!
Note from Adobe:
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq1.html
Adobe: “Note: AMD/ATI 1000, 2000, 3000, 4000 series, nVidia GeForce 7000, 8000, 9000, 100, 200, 300 series and Intel HD Graphics (First generation) cards/GPUs are no longer being tested and are not officially supported in Photoshop CC and CC 2014. Some GL functionality is available for these cards, but it's possible that newer features don't work.”
I have an early 2008 iMac:
Hardware Overview:
Model Name: iMac
Model Identifier: iMac8,1
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: IM81.00C1.B00
SMC Version (system): 1.30f1
Serial Number (system): YD*****N4
Hardware UUID: D42002AC-A757-51C0-8D5D-333AD24D3DF9
My display driver:
NVIDIA GeForce 8800 GS:
Chipset Model: NVIDIA GeForce 8800 GS
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0609
Revision ID: 0x00a2
ROM Revision: 3234
Displays:
iMac:
Display Type: LCD
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Note from Adobe:
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq1.html
Adobe: “Note: AMD/ATI 1000, 2000, 3000, 4000 series, nVidia GeForce 7000, 8000, 9000, 100, 200, 300 series and Intel HD Graphics (First generation) cards/GPUs are no longer being tested and are not officially supported in Photoshop CC and CC 2014. Some GL functionality is available for these cards, but it's possible that newer features don't work.”
<edited by host>If you decide to use up to the minute applications, you will have to accept that the computer and operating system will eventually be incompatible with your chosen application as the features in the latest application rely on new hardware and operating systems to support them.
Your options are to either use a newer Mac or use a version of Photoshop that will run on your Mac. -
My ipad has latest iTunes (11.1) but iTunes on my computer (mac 10.5.8) is now no longer compatible with ipad software and cannot sync. The same error message appears saying my computer needs to update software, but my mac has the latest software available (albeit rather old). Can I undo the software update on ipad??? Thanks
Thanks for your response, Niel. Is there no way of removing the last update from my ipad????
Appreciate your help
James -
I have been trying to update via App Store and every time only with apple software it starts to download and it will says it's calculating time remaining then an error message pops up saying " An error has occurred the request timed out. (102)" I have tried everything , I've been told its my ISP but I have tried using differenet internet to attempt the updates. Like I said all other software updates fine its just apple software
http://www.apple.com/support/mac/app-store/contact.html?form=account
Maybe you are looking for
-
How to find out what the underlying table/query of a form in Oracle Apps.
Hi I am trying to find out who owns the underlying objects of a query when a user runs the Transactions > Line_Items form for Receivables . I have selected Help > Record History but I get a message Record History not available here. The query is runn
-
ARE THESE USER-ACCOUNTS BY DEFAULT: ADAMS...
Hi everybody, I was doing a round of all the views in the SYS adminstrator account. I came across the following user-accounts in the view ALL_VIEWS: ADAMS, JONES, CLARK and BLAKE Maybe the guy who was using Oracle before me had created these user acc
-
Trying to connect my 13" macbook to HD Cinema model 1082
can someone help me connect my HD monitor with my 13"macbook?
-
Is it possible to change encryption keystore more than once??
It seems that once my environment has been informed of a keystore to use for ssl communication, it can't be changed. Is this so? I need to be able to do the following: 1) Set a keystore for ssl communicaton 2) Establish an ssl connection, (send and r
-
How to solve the following JDBC-DB2 FORMAT problem?
Here is the error info: Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong