COLOUR MANAGEMENT IN PHOTOSHOP CS2 AND COLOUR SAMPLE POINTS

I always place colour sample points on my images in order to monitor colour changes as I adjust. When I soft proof (using using Perceptual rendering),I go to the Information pallette and right click on the colour sample points.I then choose Proof option on the basis that this should tell me the colour of the sample points when I print to my chosen printing paper profile.
However,this seems not to work. If I then make a new document (say 100 by 100 pixels) and fill it with the Proof colour,as indicated in the Information pallette as described above,it bears no resemblance to the image that I have soft proofed as seen on my display (Contrtol Y). Hard to explain all this in a message,but can anyone assist?
Grateful,
Roseanne

Good day!
What exactly do you mean?
Regards,
Pfaffenbichler

Similar Messages

  • How do i turn off colour management in photoshop cc

    i cannot make any sense of the 'help' on being able to see any display which allows me to turn off colour management in photoshop cc or in lightroom 5 when using my Mac 10.9.3

    Good day!
    What exactly do you mean?
    Regards,
    Pfaffenbichler

  • Adobe Photoshop CS2 and Photoshop CS4 on the same system?

    Hi all,
    I was wondering is it possible to have both Adobe Photoshop CS2 and CS4 on my computer at the same time.  I heard that this would cause errors, but if there is, is there a work around for it.  Thanks in advance.
    pwitman

    pwitman wrote:
    Hi all,
    I was wondering is it possible to have both Adobe Photoshop CS2 and CS4 on my computer at the same time.  I heard that this would cause errors, but if there is, is there a work around for it.  Thanks in advance.
    pwitman
    Quite a few people keep an older version in case there is something not right for them in the newer version.
    Just make sure they are installed in that order.
    Be prepared to have your file associations changed.
    What is you OS by the way?

  • I am using a Photoshop cs2, and I wonder if it is possible to keep the settings of the guidelines when closing an image, with the actual document ? It would be nice to have the guidelines locked down, I find it than when opening the same or another image,

    I am using a Photoshop cs2, and I wonder if it is possible to keep the settings of the guidelines when closing an image, with the actual document ? It would be nice to have the guidelines locked down, I find it than when opening the same or another image, the guidelines are not locked, it is annoying to have to lock them down again. and it would actually be nice, to ba able to give specific directions when placing the guidelines. Thanks

    Then why are the guides unlocked when I reopen a document that I saved with the guides locked ?
    Thanks.

  • I have Adobe Photoshop CS2 and it closes down every time I open it.

    I have Adobe Photoshop CS2 and it closes down every time I open it with the following error: "Photoshop Quit Unexpectedly". Is there anything I can do to troubleshoot this?

    The first question is have you used this version on this computer with the operating system you have now. The issue might be (if you are on a Mac) that CS2 was a Power PC application and you have upgraded to a new computer with an Intel processor. CS2 will not work on an Intel processor with system (I think) OSX.6 or greater.
    If you have used this release on this computer with the same OS, than try deleting the preferences by holding down the Comand/Control-Option-Shift keys when starting the application. You will get a message asking if you want to delete the preferences, say yes.
    Let me know if any of these work.

  • Photoshop CS2 and Windows 7

    I have Photoshop CS2 and recently acquired Windows 7.  I want to bring images in directly to Photoshop but the images go through Photo Gallery in Windows.  I can import them into PS, but i want them to come into PS directly.  Also I cannot include images with an email through Photoshop.  How can I change this?
    Thank you,
    Elena de la Varga

    elena de la varga wrote:
    I have Photoshop CS2 and recently acquired Windows 7.
    Did you download and install the replacement CS2 installer Adobe made available for their old CS2 customers?
    I want to bring images in directly to Photoshop but the images go through Photo Gallery in Windows.
    This behavior is most likely happening when you connect you camera to your Windows system or Plug you Camera media card into your Window's card reader because the autoplay is set to open Windows Photo Gallery.  You need to change the default  but though I have CS2, CS6, CC an CC 2014 installed the only Adobe Autoplay options I see is Bridge CS6 and Bridge CC do not see Bridge or CS2
    Also I cannot include images with an email through Photoshop.  How can I change this?
    What email application are you using that can use applications like Photoshop.

  • I upgraded to lion when it first came out but today i tried to open my photoshop cs2 and its telling me the powerpc applications are no longer supported is there any fix out there for this

    i upgraded to lion when it first came out but today i tried to open my photoshop cs2 and its telling me the powerpc applications are no longer supported is there any fix out there for this

    Lion is Not compatible with PPC (Power PC) based software, such as your older version of PhotoShop.  Your choices are you can either upgrade to the newer version of PhotoShop, or you can backup your data and apps, erase your harddrive and reinstall Snow Leopard.
    Hope this helps

  • Best way to upgrade illustrator and photoshop cs2 and purchase indesign

    Need to upgrade my os and software. I'm running illustrator and photoshop cs2 and want to purchase indesign. what is the best way to do this?

    Cloud Plans https://creative.adobe.com/plans
    -and subscription terms http://www.adobe.com/misc/subscription_terms.html

  • I have tried downloading photoshop cs2 and cs4 on a new computer.  I have the disc available for cs2 and the serial number for cs4.  They are both registered in my name.  I need help doing a download.

    I have tried downloading photoshop cs2 and cs4 on a new computer.  I have the disc available for cs2 and the serial number for cs4.  They are both registered in my name.  I need help doing a download.  I was able to get part way through cs4, it showed up in my downloads but never got as far in the process as to ask for serial numbers.  I tried with cs2 and I got an error message that some bit of information was incorrect.  I currently have both downloaded on two other lap tops I own.  One is operational and one is dead.  I cannot access the dead one to remove the program. Thank you in advance for any assistance.

    For CS2 you will need to download a special new version
    CS2 Activation
    You might find CS4 download here
    Prodesign Tools — Photoshop Direct Download Links

  • I am reloading Photoshop CS2 and I can't get it activated. How is this to be done?

    I am reloading Photoshop CS2 and I can't get it activated. How is this to be done?

    The activation servers are retired and so your old CS2 copy and serial number no longer work.
    Adobe has non-activated Photoshop CS2 and a new serial number to go with it only for CS-CS2 owners.
    Get this here at:
    https://www.adobe.com/cfusion/entitlement/index.cfm?pid=4485850&e=cs2_downloads

  • Using LR2 w/ Photoshop CS2 and Camera Raw 3.7

    I am using Photoshop CS2 and Camera Raw 3.7 on a Mac G4, OS X 10.4.11.
    I am about to install my upgrade to Lightroom 2. Is this a bad idea?
    I have read about some compatibility issues re Camera Raw, and I have also read about how to solve the issue of exporting the keywords.
    Will this keyword issue fix work on my system?
    What are the real-world practical implications of still having Camera Raw 3.7? I usually adjust images in Lightroom, then any further adjustment is done in Photoshop (not CR). So is the only downside going to be that if I revisit the image in Camera Raw, the adjustments will not show up? Or will it also not show up in Bridge?? And if it is only in CR, is it that the image does not have the adjustments; or does it show the adjusted image, but has just all the sliders zeroed out?
    I am hot to install LR2, but I want to make sure that I am not going to open a can of worms. And yes, I could buy PS CS4 (which would get me CR 4.5), and I would like to, but I don't have a G5. And I cannot afford to buy a new desktop computer right now.
    Any input would be much appreciated. Thanks.
    Dean Abramson

    >so is the LR version of RAW as good as the one in CS3?
    It's far better as it has local adjustments and such. Lightroom is more equivalent to the ACR in CS4. To make changes you make to images in ACR outside Lightroom show up in Lightroom, you need to sync the metadata. ACR does not write the changes to RAW images to the Lightroom database, but it writes it into xmp sidecars either right next to the RAW file or embedded into it. So Lightroom has no idea you did anything until you specifically ask it to check for updated metadata.
    Note that trying to work with both bridge/ACR and Lightroom on the same set of data will inevitably make you lose data or edits at some point as you're dealing with a synchronization issue, so be careful.

  • Colour Management Issues with Leopard and Photoshop CS3

    Hi Everyone,
    Since I have installed Leopard I am having colour management issues with Photoshop CS3 and my Canon i9950 printer.
    My screen is calibrated with a Spyder and I used to ask Photoshop (in 10.4.11) to manage colour when printing and used the Spyder profile. Everything came out as I saw it on screen.
    Now in leopard when I do the same thing everything comes out too yellow on the print. If I ask Photoshop to let the printer manage the colour it is too red. If I use the default colour management (photoshop managing the colour and it choosing the colour space it is better, but still too yellow).
    Photoshop gives the hint to turn off colour management in the printer but there is no option for this and it also said the same thing before of course (when it worked in 10.4.11).
    Any ideas?
    Thanks.

    I'm having exactly the same problem, only my printer is a Canon Pixma iX4000. The colour is all bleached out, it looks exactly like when you've accidentally printed an RGB file on a CMYK printer, and at first I thought that was what I had done, but it isn't. This is very frustrating, I've spent all day going through the manuals, recalibrating etc, but no luck. This is a brand new Mac Pro and printer, but if its not going to print what I see on screen it's just expensive junk.
    I wasn't sure if the problem was Leopard or the printer or CS3...

  • Colour Management issue With Leopard and PS CS3

    Hi Everyone,
    Since I have installed Leopard I am having colour management issues with Photoshop CS3 and my Canon i9950 printer.
    My screen is calibrated with a Spyder and I used to ask Photoshop (in 10.4.11) to manage colour when printing and used the Spyder profile. Everything came out as I saw it on screen.
    Now in leopard when I do the same thing everything comes out too yellow on the print. If I ask Photoshop to let the printer manage the colour it is too red. If I use the default colour management (photoshop managing the colour and it choosing the colour space it is better, but still too yellow).
    Photoshop gives the hint to turn off colour management in the printer but there is no option for this and it also said the same thing before of course (when it worked in 10.4.11).
    Any ideas?
    Thanks.

    You need to use the correct printer profile for the paper you're using. If the printer didn't come with any pre-built profiles, check Canon's web site to see if they have any profiles available for your printer that you can download.
    Printer profiles are very specific. You can't take take a profile for glossy Epson paper and expect it to work very well for Canon glossy paper.

  • Colour management between creative suite and iPad/iOS

    Does anyone have any insight into colour management for imagery between creative suite and iPad/iOS. ? i.e using the appropriate Proof set up across indesign/photoshop/bridge to as close as you can mimic what you will see on the iPad?
    We're seeing quite radical differences from what we shoot in our studio (which is consistent on all our screens across the studio) to what we see on uploading to iPad. How can we best mimic the iPad colour space?

    This post in the Ideas forum might be of some use.

  • Colour differences in Photoshop CS4 and Flash CS4 - help!

    Hi,
    I've been having problems for a while now when working with Photoshop and Flash, so now I will try to find an answer to my problem.
    The thing is, when I try to take designs from Photoshop to Flash, the colours are changing/looking wrong. See my attached screenshot below.
    The document in the upper part of the screenshot, is the Photoshop document. There is a blue gradient in the image and the left color of the gradient is RGB: 0/90/132 and the right color is RGB: 0/131/191.
    The document in the lower part of the screenshot, is the Flash document. Here I have used exactly the same RGB colours to achieve the same blue gradient background. But as you can see on my screen, the colours look totally different. The colours in the Photoshop document looks clearer/darker.
    How can I solve this problem and get the colours to look the same in Photoshop and Flash, and why do I even have this problem?
    Kindly asking for help,
    /Erik

    No one told me to use Monitor profile, I think it was default. I have 
    no knowledge about calibration of a monitor, but since it's a nice 
    Apple monitor i figured I wouldn't need to calibrate it.
    When I open the file in Photoshop, Photoshop asks me whether to use 
    the embedded profile (sRGB in this case) or the working space profile. 
    And since I always use the emedded profile, I didn't think that it 
    would make any difference? The problem is still that I don't know any 
    way to set color handling in Flash, and the colors look all different 
    from Photoshop. What should I do?
    24 aug 2009 kl. 19.48 skrev Buko.:

Maybe you are looking for