Colour Printing issue

Hi all,
Hope someone can help. We are running Indesign CS3 and have encountered a recurring problem when printing from our laserjet. We generally use indesign for assembling presentation docs. We are 3D designers rather than graphic designers so only use Indesign in a fairly rudimenatry manner.
The issue lies that we sometimes create a coloured back ground, on a page, using the box tool and then place images (from a CAD rendering programme or photoshop etc onto this back ground) the images placed would either have the white background made transparent in photoshop then inserted into indesign as a TIFF or we would match the RGB/CMYK in the original programme to the colour of the box so that the bounding box of the inserted image does not show. Generally on screen everything looks ok until we print whereupon the bounding boxes of the inserted images tends to show through as a slight colour discrepancy (whether it was transparent or the same colour as the background box). This problem happens when printing direct from In design and also if we turn the doc into a PDF. In both cases the doc looks ok on screen.
I'm sure we are doing something fundamentally stupid and wonder if it is an RGB/CMYK issue between images inserted and the doc itself.
Thanks for any help

Hello,
From what you've described it's a colour management issue and your cmyk profiles are likely to be different, what i'd suggest is do the following:
Check your colour suite settings (photoshop, indesign, illustrator etc), these should be the same throughout (syncronised) so you've got consistant colour management throughout and assign the right colour profile to your images.
Check your images are CMYK if you're matching the sliders, not RGB - most rendering engines will do RGB as standard so you might need to change the colour mode.
Are you using spot colours? if you are, convert them to cmyk as you're more likely to get transparancy issues.
Hope that helps!

Similar Messages

Printing colour recognition issue with illustrator created design.

I have a macbook pro with retina display and illustrator Cs 6.
For some reason, when I tried to print my illustrator designed work at the professional printing service.
it said there are colour recognition issue. I wasn't sure if that is anything to do with the Illustrator Cs6 or to do with the retina display or the printing service.
I would like to know if anyone have the same issue, and how do you resolve it.
Thanks.

Ahhh,
The colour mode is websafe HEX is the design work by the looks of it and the print is using CMYK mode. Try changing the document's colour mode to CMYK from RGB and see if the blue looks darker. It should do.
Take a look at the image I've attached. I've created both RGB and CMYK variations of the hex colour #0099BA.
I think it's just down to a difference in colour mode between digital version and print. There are some really great comparison sites available that will give you a close conversion if your matching spot and PANTONE® colours too.
Let me know if your any closer to a resolution please. Interested to see what the issue is.

WiFi printer which can work with one cartridge also at a time (black or color) in a colour printer

All-in-one (OfficeJet or Inkjet) WiFi printer which can work with one cartridge also at a time (black or color) in a colour printer.
Even if colour cartridge is over, w/o replacing I can still print with black cartridge.
Which printer is suitable.

Since I upgraded to Firefox 19 from 18.0.2, on my Windows XP (SP3) laptop, I, too, can no longer open a new window. File-->New Window does nothing; also can no longer tear off a tab and open it in a new window (it stays where it is). Also, if I right-click on a tab and select Move to New Window, nothing happens. All of these worked fine in FF 18.0.2. All of these work fine with FF 19 on Windows 7. Only an issue on my XP laptop.
After trying to open a new window, and not seeing the new window come up (and yes, I waited a long time), I decided to close my current window, which had multiple tabs open. Instead of just closing, it pops up the message reminding me that I'm about to close all those tabs. If I say close, and then go into the Task Manager, the Firefox application has disappeared (as expected), but the firefox (and plug-in container) processes are still running. So I have to manually kill the Firefox process to get it to quit. it's as if it thinks there is another Window open (the one I tried to open but never appeared). This happens every single time! I've restarted my laptop, and that does not resolve the problem.
Is there a way to downgrade back to v 18.0.2 until this is fixed?

How to get consistent colour prints from different Macs?

Hello Forum,
we are unable to get consistent colour prints from the various Macs in our office. There is only one printer, and for the sake of this discussion only one PDF file to be printed. The Macs have various OSes, from 10.4.11 up to 10.9.5; most are Minis of one vintage or another.
The printed results *should* IMHO be identical no matter which computer issues the "print" command, but they are far from that. Some computers print with a reddish tint, others with too little saturation or too much brightness (to put it in Photoshop terms).
What exactly must we do to get identical results no matter which computer does the printing?
Thanks in advance
John
p.s. May I just say what a ridiculous pain in the neck it is to have to choose from that list of purchasable Apple products aka communities? Some questions, like this one, do not belong in a single community or at least there is no community whose title describes our problem. I am uneasy filing it under "Mac Mini" because there is absolutely no reason to believe that the problem is a misbehaviour of *one* of our Minis. In the old days, when help was geared to users rather than to pushing the sale of further Apple products, there used to be forums with titles like "Printing problems".

Thanks for the suggest, which didn't solve the problem — because it wasn't a Mac problem at all. Acrobat Reader was getting the colours wrong! Setting "Print as image" in the Print dialog extensions solved it.
Resolved, case closed.

Why do my pattern swatch colours print differently to rest of my artwork

I have some 2 coluor artwork consisting of 2 x pantone colours purple and grey.
Within the artwork is a stripe pattern swatch consisting of the same colours. On screen the colours are fine and I've checked all the colour settings and these are fine too.
Why however when i print the artwork does the pattern print in a different colour???
Please help as I'm going out of my mind with this one.!
Anthony

I am having exactly the same problem.
The colours of a pattern fill print very differently when it is expanded.
All the colours in the pattern swatch are CMYK. They look identical on screen when the pattern fill is expanded.
When printed, the mustard yellow, the appley-lime green, and the purpley-grey look completely different.
I'm using CS6 Illustrator, FOGRA39. I'm wondering if this is a printer issue maybe?
This is really frustrating and very worrying as I use pattern swatches a lot, and colours need to stay the same as they are approved.
I've found this thread and another one from 2010 with what sounds like the same issue (Pattern Swatch Colours) but neither have been resolved.
Please help if you have any ideas!

Colour Management Issue with PS CS3 and Leopard 10.5.2

Hi Everyone,
Since I have installed Leopard I am having colour management issues with Photoshop CS3 and my Canon i9950 printer.
My screen is calibrated with a Spyder and I used to ask Photoshop (in 10.4.11) to manage colour when printing and used the Spyder profile. Everything came out as I saw it on screen.
Now in leopard when I do the same thing everything comes out too yellow on the print. If I ask Photoshop to let the printer manage the colour it is too red. If I use the default colour management (photoshop managing the colour and it choosing the colour space it is better, but still too yellow).
Photoshop gives the hint to turn off colour management in the printer but there is no option for this and it also said the same thing before of course (when it worked in 10.4.11).
Any ideas?
Thanks.

>It was working perfectly in Tiger with the monitor profile.
You were lucky.
the monitor profile is so Photoshop can display your images correctly.
the working space is Adobe RGB, sRGB, BruceRGB, ect... these are all known color spaces so when the file goes to another computer there is a consistent color space for reference. If you use your monitor profile as a working space then nobody else knows what is going on with your file.
when you print you need to use the printer profile for the type of paper you are printing on this is supplied by the printer manufacturer. you can also have custom profiles made.
you need to read up on color management:
http://www.gballard.net/psd.html
http://digitaldog.net/

Colour Management issue With Leopard and PS CS3

Hi Everyone,
Since I have installed Leopard I am having colour management issues with Photoshop CS3 and my Canon i9950 printer.
My screen is calibrated with a Spyder and I used to ask Photoshop (in 10.4.11) to manage colour when printing and used the Spyder profile. Everything came out as I saw it on screen.
Now in leopard when I do the same thing everything comes out too yellow on the print. If I ask Photoshop to let the printer manage the colour it is too red. If I use the default colour management (photoshop managing the colour and it choosing the colour space it is better, but still too yellow).
Photoshop gives the hint to turn off colour management in the printer but there is no option for this and it also said the same thing before of course (when it worked in 10.4.11).
Any ideas?
Thanks.

You need to use the correct printer profile for the paper you're using. If the printer didn't come with any pre-built profiles, check Canon's web site to see if they have any profiles available for your printer that you can download.
Printer profiles are very specific. You can't take take a profile for glossy Epson paper and expect it to work very well for Canon glossy paper.

Colour Management Issues with Leopard and Photoshop CS3

Hi Everyone,
Since I have installed Leopard I am having colour management issues with Photoshop CS3 and my Canon i9950 printer.
My screen is calibrated with a Spyder and I used to ask Photoshop (in 10.4.11) to manage colour when printing and used the Spyder profile. Everything came out as I saw it on screen.
Now in leopard when I do the same thing everything comes out too yellow on the print. If I ask Photoshop to let the printer manage the colour it is too red. If I use the default colour management (photoshop managing the colour and it choosing the colour space it is better, but still too yellow).
Photoshop gives the hint to turn off colour management in the printer but there is no option for this and it also said the same thing before of course (when it worked in 10.4.11).
Any ideas?
Thanks.

I'm having exactly the same problem, only my printer is a Canon Pixma iX4000. The colour is all bleached out, it looks exactly like when you've accidentally printed an RGB file on a CMYK printer, and at first I thought that was what I had done, but it isn't. This is very frustrating, I've spent all day going through the manuals, recalibrating etc, but no luck. This is a brand new Mac Pro and printer, but if its not going to print what I see on screen it's just expensive junk.
I wasn't sure if the problem was Leopard or the printer or CS3...

Smart form Colour Print

Hi .
I have an issue in smartform printing.
while seeing the print preview the logo is comming in colour.
but in the print ,black and white logo is comming.I want the clour logo in the print also.
the printer is a colour printer.
are there any settings I have to do for getting the colour print.
Thanks in advance,
Regards,
Eswar

Before uploading the photo in SAP thru SE78 just save it as 256 colour BMP image and them upload it.
Re: Graphics background in smart forms

Strange Printing Issue With New HP & Pages

Hello!
I have a very strange printing issue with a new HP printer. I have written pages documents heavy in Texts which are located within tables. The documents print fine on a Cannon and Epson printer and look great but when I print the document on my new HP Laserjet Pro 400 Colour M451nw some of the text on some rows come out of the printer looking like they are bold / slightly fuzzy. This only happens with some of the rows of text, not all of them. The font is the same in every row with the same format.
You can see this in the attached image. The first line (Thanks very much) has printed correctly but the subsequent lines look bold / slightly fuzzy.
After a lot of testing the only way I can resolve this is if I copy the content into a new pages document and only then it will print and look ok with the HP printer.
This must be a problem within my origional document. I would simply copy and paste everything into a new document however this would take a very, very long time (over 5 years of work producing teaching materials and over 100 documents and thousands of tables and formatting that cannot be copied and pasted).
Also, on other printers you can see the lines seperating each row of the table. These lines are not visible on the HP print outs, even when the table is copied into a new document.
Has anyone come accross an issue like this before? Is there a way I can fix this without creating a new document? Do I need to get a new another new printer (the 4th printer this week!)?
Any advise, wise words would be greatly apprechiated!
Thanks!

Sorry, Fruhulda. After 4 hours on the phone with Apple care they are taking this issue further themselves. It seems to be a problem with our pages document and the compatibility with certain drivers. We have still not gotton to the bottom of it and Apple are going to get back to me when they have an answer.
We also worked out that the issue only happens when you print via Ethrenet & USB. Printing via Wifi is ok and there are no quality issues.
Very Strange!

WARNING: Canon Pro Printers and CS4 – Serious Colour Management Issue

Over the last four days (and over fifty prints) I have undertaken extensive and meticulous tests to identify the cause of a problem; namely that targets for profiling a new printer (a Canon Pro9000), printed with ‘no colour management’, were printing far too dark and with what appeared to be a colour cast.
I have conclusively eliminated the printer, the printer drivers, the Mac OS, corrupted preference files, corrupted user accounts, incorrect Photoshop settings, incorrect printer driver settings, the ‘sticky settings' issue, and user error as possible causes of the problem.
I can say with 95% certainty that my tests, conducted using Mac OSX 10.4.11, have proved the following:
That, printing to a Canon Pro9000 or iP4500, Photoshop CS4 does not print accurate targets suitable for producing profiles. This applies to both the No Colour Management (NCM) and the Printer Manages Colour (PMC) settings.
Photoshop CS and CS2 are not effected.
I did not test CS3.
Furthermore, colour managed prints (using the same accurate profile made in CS2), printed in CS2 and CS4, show subtle differences. This may not be an issue except in the most critical applications.
It is likely that the problem will not be confined to the two Canon printers above since many other Canon printers share the same driver architecture.
Reading posts and discussions on other websites would seem to indicate that this problem is also manifest with some Epson printers and may also effect Mac OSX 10.5.
I have to conclude, therefore, that Photoshop CS4 cannot be replied upon to print targets of sufficient accuracy to produce reliable profiles for a colour managed workflow.
The fact that this is only just being reported can be attributed to four factors:
That many CS4 users are continuing to use profiles made under older versions of Photoshop and have yet to make new profiles using CS4.
Some users may not immediately notice a problem, or may ascribe it to other causes.
Some users may take the line of least resistance and use a previous version of Photoshop to work around the problem.
Some users are still using the older versions of Photoshop not effected.
Eric Chan (of Adobe) has stated on another website that CS4 implemented some new APIs for printing and that this has given rise to some "minor glitches". If Eric Chan is correct, and Adobe changed the APIs in Photoshop CS4, this begs question of whether Adobe sufficiently tested CS4 before release ? If Adobe did not test their software, and therefore failed to identify this critical problem, this would suggest negligence on Adobe’s part. If Adobe identified the problem but then did not inform users that a potentially serious colour management issue existed this would suggest wilful or gross negligence.
It is not good enough to say that Adobe simply followed the ‘conventional’ path and ‘followed the rules’ regarding API implementation. The experience of end users does not correspond to a “minor glitch” and, in my case, has been extremely costly in terms of time (over five days in all), lost revenues, and materials. Furthermore, why should Adobe's customers be forced to use their valuable time diagnosing problems clearly of Adobe's creation – and actually admitted.
In UK law providers of goods and services (and this includes software) have to supply them as “fit for purpose”. Clearly, in terms of colour management, CS4 is not fit for purpose. Neither can Adobe hide behind its labyrinthine licensing terms since any exclusions would be ruled unlawful under the UK’s ‘Unfair Contract Terms’ Act.
My strong and unequivocal recommendation is that representatives from Adobe, Apple, and the printer manufacturers meet together – with the utmost urgency – and provide a rapid and complete solution. It is simply not good enough to pass this ‘over the wall’ saying “it’s not our problem”. It is. Adobe's, Apple's, and the printer manufacturers'. Please solve it. And quickly.
Identify the problem clearly, make it and the solution/s public; and publicise it widely and thoroughly.

Dear DYP.
Thank you for your concern.
"What fixes have you tried?"
If I may quote from my post above:
"I have conclusively eliminated the printer, the printer drivers, the Mac OS, corrupted preference files, corrupted user accounts, incorrect Photoshop settings, incorrect printer driver settings, the ‘sticky settings' issue, and user error as possible causes of the problem.
I can say with 95% certainty that my tests, conducted using Mac OSX 10.4.11, have proved the following:
That, printing to a Canon Pro9000 or iP4500, Photoshop CS4 does not print accurate targets suitable for producing profiles. This applies to both the No Colour Management (NCM) and the Printer Manages Colour (PMC) settings.
Photoshop CS and CS2 are not effected.
I did not test CS3"
These tests took place over three weeks and involved over five days of work and the replacement of the printer on Canon's recommendation (although the printer is clearly not at fault).
Please note that I am using Mac OSX 10.4.11.
"What driver versions are you using?"
Pixma iP4500 6.9.3 (also 6.9.1, 6.9.2 and the driver supplied on the CD).
Pro 9000 4.8.7 (also 4.7.3, 4.8.4 and the driver supplied on the CD).
"Yes it is frustrating but in a lot of cases it is fixable as I and others have clear reported, on this and the LR forums."
I have not found any fix on any website referring to Canon printers, despite exhaustive searches (this includes Canon's European and US websites which are mute on the issue).
The ReadMe file supplied with the installation disc of CS4 refers to problems with "some Canon printers" when printing with the 'Printer Manages Color' but does not identify using 'No Color Management' nor Epson printers as having issues.
I hope this post answers your questions.
Clearly all users of CS4 need to be warned of this problem which is likely to effect other printers. I believe that I am assisting others by issuing this warning. It is done, not to cause mischief, but in the spirit of a public service. CS4 users can then treat their printing results from CS4 with caution, and then conduct their own tests. I have presented a workaround which is to use a prior version of CS4.

Help me solve color and dark print issue with a new monitor recommendation!

I know, I hate "surveys" too. I'm thinking of attacking my color and dark printing issues w\LR and CS4, by investing in a new monitor. I currently have an 20' early edition Apple Cinema Display. The monitor is the last hardware (software) item in my current upgrade cycle. From those folks who are NOT having color or print problems, what displays are you using (or would recommend)? Ah, and price is an issue. Apologies in advance to those who think this is not appropriate use of the Forum.

Monitor calibration is the first port of call. Sometimes changing one item in a system is enough to show up a colour management issue. You suggest that the monitor is the last item in your upgrade cycle, what all have you changed? Computer, printer? There may also be a setting you have failed to set when you installed the new software, eg. have you remembered to set relative colorimetric with the black point compensation box ticked, disable colour management in your printer driver and put an appropriate colour profile for your monitor onto the new computer? You also need the correct profile for your printer/paper combination set up in Photoshop.
If you haven't calibrated your monitor, that on its own will give you poor prints, but all the other bits are needed also.
Jo

Colour alignment issues with CP1515n

I'm having some colour alignment issues with my Color Laserjet CP1515n. Lately, I've noticed that the 3 colours go out of alignment from the middle towards the right of my printouts. Alignment at the left towards the middle half of the page is ok but gets progressively worse towards the right side of the page.
Nothing in the user interface allows me to reset the colour alignment. What can be the cause of this and what's the remedy? This printer is slightly over a year old and has only just gone through its first set of toner cartridges.

I am also having alignment issues to the same nature as the post below. I have just replaced the Black, Magenta and Cyan toners. After doing this the alignment goes out of register from left to right (left edge fits right edge all colours are out of fit by 2mm).
I have also found nothing in any manuals as to how to adjust or fix this problem. This is the second time I have replaced these colours. I have re-calibrated and taken the cartridges out several times but it is still the same.
Any advise would be helpful. As it is at the moment the printer is unusable for my job and it's the only one I have.

Printing Issues with HP OfficeJet 100 and Windows 8.1

We use HP OfficeJet 100 mobile printers and have a printing issue.When we print the printer acts as if it is going to print and then prints one blank page.Printer will not print even though it is showing as default printer.Printer will just stop printing in the middle of a document, even in the middle of printing out a page. We are printing via the USB cableWe are using Windows 8.1We are connecting to laptopsWe have been using the HP mobile range of printers since 2004 and have only experienced these issues since we moved the laptops onto Windows 8/8.1 We have:Uninstalled and reinstalled the printer drivers – this fixed this issue for a short while and then it reappeared againCalled HP support and they directed us to the driver support page which had the latest print drivers, uninstalled and reinstalled drivers with them on the phone. This initially fixed the problem and then it returned a few days laterAfter trawling the support forums found directions to change the print processor to “WinPrint” – No effect as the processor was already on this settingDownloaded the HP diagnostic tool – HP Print and Scan Doctor – didn’t fix anything Any further help would be much appreciated.

Hello there Lawrence, Welcome to the Forums! I hope you enjoy your experience
I noticed your post about the troubles you are running into when you attempt to install your OJ 6100 printer on your Windows 8.1 laptop. I read all of your attempts and seen you have tried several methods to try and get the installation to complete successfully.
I would like to make some suggestions that may help. Let me know how it goes!
1. Check that Internet Explorer pop-up blockers are turned off before downloading the installer
Internet Explorer Pop-up Blocker: How do I turn off Pop-up Blocker?
Try to install
2. If you're running McAfee Live Safe or any other firewall, please temporarily disable the "real time scanning".
How to disable realtime scans
Try the install
3. Go to the start screen (you may also press the windows key + R to open the run box) and type %WINDIR% this should show the windows folder.
Click on the folder and scroll until you see files. Look for a filed named "HPWINS*.DAT" (the * is for a number that varies) remove this file and try the installation.
Try the install
Enjoy your Monday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP ENVY 100 D410 Printing issues...

I have an HP ENVY 100 that has recently started having printing issues. We recently upgraded to Mountain Lion and had no problems in the upgrade nor have we had any other software that we've changed. The problem seems to be somewhat random and the results are always the same. When commanded to print the printer acts as if it is running out of ink and then distorts the fonts creating vertical lines on the page and skipping rows creating what almost looks like a bar code. It's most peculiar and the only way I can find to solve the issue is to completely restart both my system and the printer. Thinking that I had a driver issue on my Mac I used the utility on the printer to update drivers and none were found. To insure that the problems wasn't isolated to just my machine I tried our laptop as well and it seems to have the same problem. Has anyone had a similar problem?

Hi Talon,
That more liekly related to the software indeed, I would suggest trying the following steps:
Reset the printing system as listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01371980
Open the Applications folder, then Hewlett-Packard and then open the Device Utilities folder, launch the HP Setup Asisistant and follow the steps to reconfigure the device.
If there is no Hewlett-Packard folder simply re-add the printer by clicking the plus button under Print & Scan.
Now try printing and follow for any difference.
If the same persists uninstall any HP Software by following the HP Uninstaller under the Hewlett-Packard folder.
If there is no Hewlett-Packard folder follow the steps listed under Mac OS X 10.6, 10.7, and 10.8 > I used Apple Software Updates to install the product software below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02440673&tmp_task=useCatego ry&cc=us&dlc=en&lang=en&lc=en&product=5157536#N1305
Download and isntall the latest Lion Software below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-97934-2 &cc=us&dlc=en&lc=en&os=219&product=4073738&sw_lang=
Once completing the installation click the Apple icon and install any available Software Update.
Shlomi

Colour Printing issue

Similar Messages

Maybe you are looking for