Colour problem, inverted? cannot see a thing on any file
Hello,
I've got iWork 09, and ive just noticed that this problem seems to be on all 3 of the programs.
What happens is that no matter what i open, existing file, template, you just cant see it, you have to highlight it in order to know whats on there lol. For some reason it worked a couple weeks ago when i updated my C.V, but when i click on say, business cards, you can't see a thing. I just updated to 9.03 but no success.
I'd upload a screenshot here but i can't seem to be able to, so instead, if you've got an account at MacRumors then here: http://att.macrumors.com/attachment.php?attachmentid=205124&d=1259506729
Many thanks
Peggy wrote:
Several reasons for me & I'm sure I'll think of more:
Able to resize icons in a finder window with the slider at the bottom right of the window. No need to open View Options for it.
After a Spotlight search (which does not do a column view), window view will revert to whatever view you had before.
Preview's annotations are better. You can insert text boxes in the PDF like before Leopard.
Wow, those really knock my socks off! The problem is that Windows 7 is a genuine improvement on what they had before, Snow Leopard didn't even do any elementary household cleanup.
They may have improved the plumbing and wiring but everything that was broke and in your face is still there.
Plus the plumber and electrician did a bit more damage whilst they were at it.
The biggest "bad thing" is the difficulties in combining PDFs. It can be done, but does not work as well as before.
Seems like Apple takes some of the "procedural" tasks in OSX up yet another notch of irritation in every version.
An increasingly dumbed down, broken "simplicity".
Peter
Similar Messages
-
Cannot see text in large PDF file
Hi all,
I've searched Google and these forums, but I have yet to find anything relating to my issue.
I'm trying to view a PDF file, but I cannot see any text in Adobe Reader.
I've viewed it w/ the FoxIt reader, and I can see all text there.
Any idea as to what the problem w/ Adobe reader is?
I have the most up-to-date version of the reader.
Thanks in advance.Enable the entry 'Show large images' in the preferences of Adobe Reader.
-
Cannot see Airplay icon on any of my devices
Hi Community,
I bought a brand new Apple TV and it connected to the wireless network at home. I can use photo stream with all my devices, I can access all internet services directly using the Apple TV (e.g. Youtube, Movies, Netflix, etc...) but I cannot see Airplay on any of my devices (2 iPads, 2 iPhones).
I have disabled the firewall settings on my router. The Apple TV has a DHCP ip address and has strong wireless signal. I have updated my AppleTV software today to the latest version. Still none of my devices can see Airplay icon.
I couldn't find any discussion that could help me in sorting my problem out.
Help please?
ThanksThanks for the link. It didn't work at first on any of the devices but then I decided to enter a manual DNS instead of an automatic configuration. Then followed the steps again from your link and it worked.
It is not stable though as I need to reset the device for it to see the airplay. But when it is connected it stays connected for 30 minutes approx.
Any other suggestions to keep it stable would be fantastic but at least in the meantime I have a workaround.
Thanks -
Spool file problem,Can't see the query in output file.
Hello ,
I am facing a very old school kind of problem .....about spool file ....
The scenario -
I have made a script by name DB_Status_checkup.sql which i want to fire on the database to check the database status. In this script their are many queries regarding the data dictionary views to know about the database. It consist of nearly 25-30 different select queries..
The problem is i want to make a spool file of the output of that query....i want to see the SQL query & the output below in the spool file, so it will be easy for me to judge the result. But i can't see the SQL query , i can only see the output , & in so many queries it all gets jumbled up....even i can't understand where the next output starts ...
Sample of my SQL Script ....
clear buffer
spool D:\DB_status.txt
/*To check the database startup time*/
Select to_char(startup_time, 'HH24:MI DD-MON-YY') "Startup time"
from v$instance
.........next query n so on....
spool off;
In the output pf the spool file at D:\db_status.txt..
Startup time
08:25 16-JUL-10It shows only the output of the query in the spool file not the query,
What should i do to get the SQL query as well as the output of that query just below it in the spool file ???
Please suggest if you have anymore ideas , regarding this .....
ORACLE 10g R2
Windows Server 2008
Thanks in advance ...Why don't you just use database control, instead of re-inventing the wheel?
Apart from that, SQL*Plus has it's own reference manual, which you apparently refuse to read.
The answer to your quiz/doc question is
set echo on
Sybrand Bakker
Senior Oracle DBA -
Leopard cannot see hard drive on any Mac running Tiger.
Running Leopard 10.5.2 on a Mac Pro 3GHz 4-core w/6GB RAM. I cannot connect to any hard drive / root directory on any Mac on my network running Tiger (10.4.9, .10 or .11) or OS9. Yes I have an Avid Meridian in the edit suite runing OS 9.2.2. No laughing please...
I can connect to the User folder on any Mac running Tiger but not any hard drives on any Mac running Tiger from a Mac running Leopard. The hard drive cannot be accessed from a User folder even if an alias of the Tiger drive is placed in the ~/User/Public folder.
The reverse works as usual. Any Mac running Tiger can see any hard drive on any networked Mac including Macs running Leopard.
Has anyone else encountered this issue &/or found a workaround? I spent almost 2 hours with Apple Tech Support including a system specialist. They confirmed this behavior in Leopard connected to Tiger OS Macs. Hard drives can be seen between all Macs running Leopard. It was theorized by one of the Apple techs that the behavior was engineered to encourage upgrading all Macs to Leopard. BAD idea! I requested this be reported to Apple engineering.
Tiger can see any drive on the network back to OS7. Leopard cannot see previous OS version hard drives.
TIA for replies.I suggest that you repeat the external boot process with your MBP. If it boots the MBP, the internal SATA cable probably is faulty and should be replaced.
Ciao. -
Our team cannot see shared and sync'd files in our Creative Cloud account. How can we fix this?
The team members are logged in, have loaded a test file in the Creative Cloud Files directory, uploaded them to the Cloud and made the files public, but we cannot see them in the web browser under "Creative Cloud Files".
The files seem to be there because we can send an email with a link to the files and can see them through the linke, just not in the browser.
What might we be doing wrong?Folder sharing is not available yet. It is being worked on.
So currently a file is owned by one Adobe ID. That Adobe ID can create a public sharing link to that file. Anyone can access this link whether or not they are signed in with an Adobe ID. -
Netinstall Problem - clients cannot see boot image
Hi all,
I really want to be more efficient at deploying images out to the more than 100 Macs I am in charge of in my job. So, I've been researching all my options, and finally decided to just jump in and build an image to deploy!
I was pleasantly surprised at how easy instaDMG was to work with, and though I don't expect it to go smoothly, would really like to try out deploying my image to a machine for the first time. I realize that I can't do this until I boot said machine from an alternate OS source than the one that runs the hard drive of the Mac. So, I attempted and somewhat successfully created a netinstall image.
I have been unable to boot the Mac on my network that I want to try deploying to from the netinstall image I created and put on my server. I have researched and tried everything I can find, but I am totally at a loss now about how to make this Mac recognize on bootup that there is something for it to grab on the network. All I get is the flashing world at start up, and then after a few minutes of that it gives up and boots from its hard drive.
Please help me! How can I make this thing work?
Here is what I have tried:
I created the netinstall image and placed it in the /Library/NetBoot/NetBootSP0 folder that was created when I activated a NetBoot server.
I set up the NetBoot and NetBoot Client sharepoints for access, and even created an additional new user called "image" (nonadministrative) for later authentication.
I also tried telling these two sharepoints to automount, thinking maybe that was the problem.
It is entirely possible that some of the settings I chose to use during set up of any of these things were wrong, though I tried to follow instructions I had from numerous places as carefully as I could. The problem is, I am not a networking person, and really am a biologist by trade - the computer stuff is an aside, and a self-taught sort of thing.
Can someone help me trouble shoot my issue here?
Thanks much in advance!Hi
+"Could that be the problem? If so, how do I fix it?"+
Apart from the advice Brian has offered you should be aware of some general information regarding the Service itself. The Service does not work wirelessly. There needs to be a DHCP Service running somewhere on the same network. Clients 'discover' the Service using DHCP, BDSP, BootP and TFTP. The DHCP Service does not have to be on the Server itself. Netboot does not traverse subnets easily. If you don't have the facility to traverse subnets (ie: switches capable of providing an IP Helper address for the NetBoot Server itself) then you will need to either (a) place a NetBoot Server at each subnet or (b) use Routers or VLANS to route/relay appropriate traffic for each subnet.
+"You mention an IP Helper. Is this something in my server software that I have already?"+
No
+"Or an additional downloaded program?"+
No
An IP Helper Address is configured in your switch (if capable) as already mentioned. You could approach this another way? Configure the DHCP Service to hand out IP addresses to your mac clients that are within the same subnet as your NetBoot Server. Or you could look at it another way and re-assign your NetBoot Server's IP Address to be one that is part of the same range as your clients. Obviously it needs to be an address that is not within the Clients' DHCP Pool.
http://routergod.com/trinity/
Explains what an IP Helper Address is.
More on the Service itself here:
http://manuals.info.apple.com/enUS/System_Imaging_and_SW_Update_Adminv10.5.pdf
Tony -
Cannot see my attached doc in file attachment list
Hi all,
I used the code below to attach a doc to a pernr. After attaching a PDF document to pernr 00070845, I goto transaction PA20/PA30 to see the attachment list. However, I cannot manage to see the doc in the attachment list. Idoublle check that table SOOD (SAP Office: Object Definition) contains the added entry but table SRGBTBREL(Relationship in GOS Environment) did not have the entry. What could be the problem here in the codes?
"Construct upload structure from xstring
This part of code is meant ONLY for .PDF file type
IF wa_document_type = 'PDF'.
WHILE wa_stringlength <> -1.
CLEAR: wa_xbuf, wa_contents_hex.
wa_stringlength = STRLEN( wa_datastring ).
IF wa_stringlength >= 510.
wa_xbuf = wa_datastring(510).
wa_datastring = wa_datastring+510.
ELSE.
wa_xbuf = wa_datastring.
wa_stringlength = -1. "end condition
ENDIF.
<contents_hex> = <xbuf>.
APPEND wa_contents_hex TO wt_contents_hex.
ENDWHILE.
ENDIF.
"Find proper folder for uploading
CALL FUNCTION 'SO_FOLDER_ROOT_ID_GET' DESTINATION 'NONE'
EXPORTING
OWNER = ' '
region = 'B'
IMPORTING
folder_id = wa_folder_id
EXCEPTIONS
communication_failure = 1
owner_not_exist = 2
system_failure = 3
x_error = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
wa_document_data-obj_name = 'MESSAGE'.
wa_document_data-obj_descr = wa_filename.
wa_document_data-obj_langu = 'E'.
"Upload the document
CALL FUNCTION 'SO_DOCUMENT_INSERT_API1' DESTINATION 'NONE'
EXPORTING
folder_id = wa_folder_id
document_data = wa_document_data
document_type = wa_document_type
IMPORTING
document_info = wa_document_info
TABLES
OBJECT_HEADER = wt_object_header
OBJECT_CONTENT = wt_object_content
contents_hex = wt_contents_hex
OBJECT_PARA = wt_object_para
OBJECT_PARB = wt_object_parb
EXCEPTIONS
folder_not_exist = 1
document_type_not_exist = 2
operation_no_authorization = 3
parameter_error = 4
x_error = 5
enqueue_error = 6
OTHERS = 7
IF sy-subrc = 0.
COMMIT WORK.
ENDIF.
wa_obj_rolea-objkey = lo_stru_input_param-pernr.
wa_obj_rolea-objtype = 'BUS1065'.
wa_obj_roleb-objkey = wa_document_info-doc_id(34).
wa_obj_roleb-objtype = 'MESSAGE'.
CALL FUNCTION 'BINARY_RELATION_CREATE' DESTINATION 'NONE'
EXPORTING
obj_rolea = wa_obj_rolea
obj_roleb = wa_obj_roleb
relationtype = 'ATTA'
FIRE_EVENTS = 'X'
IMPORTING
BINREL =
TABLES
BINREL_ATTRIB =
EXCEPTIONS
no_model = 1
internal_error = 2
unknown = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
COMMIT WORK.
Edited by: Siong Chao on Nov 15, 2010 11:03 AM
Edited by: Siong Chao on Nov 15, 2010 11:05 AMHi Siong,
as I remember I faced rough the same problem.
Solution for me was to use an explicit transaction management and only one COMMIT WORK.
Block before upload (logic from program SAPLSO33 PAI: USER_COMMAND_0100)
DATA:
lr_transaction_mgr TYPE REF TO if_os_transaction_manager,
lr_transaction TYPE REF TO if_os_transaction,
lr_os_ps TYPE REF TO if_os_persistency_manager
TRY.
CALL METHOD cl_os_system=>init_and_set_modes
EXPORTING
i_update_mode = oscon_dmode_direct
i_external_commit = oscon_false.
lr_transaction_mgr = cl_os_system=>get_transaction_manager( ).
lr_transaction = lr_transaction_mgr->create_transaction( ).
TRY.
CALL METHOD lr_transaction->start.
CATCH cx_os_transaction_mode.
lr_transaction->set_mode_update( oscon_dmode_update_task ).
lr_transaction->start( ).
ENDTRY.
CATCH cx_os_error cx_os_system_error INTO lr_except.
CALL METHOD lr_except->get_longtext
EXPORTING
preserve_newlines = abap_false
RECEIVING
result = lv_except_text.
CALL METHOD lr_except->get_source_position
IMPORTING
program_name = lv_except_prog
include_name = lv_except_incl
source_line = lv_except_line.
WRITE: / iv_file, lv_except_text, 'in', lv_except_prog, '/', lv_except_incl, lv_except_line.
cv_errlvl = 1.
RETURN.
ENDTRY.
Block after linking with BINARY_RELATION_CREATE:
TRY.
lr_os_ps = cl_os_system=>get_persistency_manager( ).
CALL METHOD lr_os_ps->set_update_mode
EXPORTING
i_mode = oscon_dmode_direct.
CALL METHOD lr_transaction->end.
CATCH cx_os_error cx_os_system_error INTO lr_except.
CALL METHOD lr_except->get_longtext
EXPORTING
preserve_newlines = abap_false
RECEIVING
result = lv_except_text.
CALL METHOD lr_except->get_source_position
IMPORTING
program_name = lv_except_prog
include_name = lv_except_incl
source_line = lv_except_line.
WRITE: / iv_file, lv_except_text, 'in', lv_except_prog, '/', lv_except_incl, lv_except_line.
CALL METHOD lr_transaction->undo.
IF cv_errlvl EQ 0.
cv_errlvl = 1.
ENDIF.
RETURN.
ENDTRY.
COMMIT WORK.
On undesirably sy-subrc use lr_transaction->undo.
Regards, Hubert
Edited by: Hubert Heitzer on Nov 15, 2010 12:40 PM -
Cannot see optical drive or read files from superdrive
This is my first ever posting so I apologize if I’m giving too much info.
A couple years ago I installed a Pioneer DVD-RW DVR 107D in the top bay of my G4 (mirrored doors) and put the combo drive (Philips CDD5105) in the bottom bay. Back then I was running OS 9. All worked well, and continued to after I decided to start using OS X. I continued updating all the way up to 10.4.8 (I have avoided updating to 10.4.9 since it caused issues on our IBook). About a year ago the combo drive would come and go (in the system profiler) but the super drive was still working fine. Over the past year strange things began happening. If I would insert a kids games CD it would cause a kernel panic. So I simply used our Ibook to let my daughter play reader rabbit. For about the past 6 months the combo drive has not been recognized in system profiler. But other than the kids cds the super drive seemed to be working well reading & writing both CDs & DVDs. Then it began to error out burning CDs saying they could not be verified but the CDs were turning out ok it was burning DVDs without a problem. Within the last couple weeks it stopped recognizing files correctly. If it is an image or ai document it would say the files could not be opened and it would also not open installers of any kind. I finally decided to try to get it fixed. Last weekend I ran Tech tool & optimized the hard drives and low and behold it was fixed. Combo drive was back & working, Super drive was working correctly & the kids CDs did not cause problems either. This lasted for about 4 days of very infrequent use and all the problems were back. Then yesterday after being off for a couple days I started it up and all was ok again. So I left it on over night planning to make a disk image of it today. At this point I had a theory that my set up might be causing the problem. Since I had been running OS X it was installed and running on a second hard drive I had installed connected to a slave bus while OS 9 was still on the original hard drive connected to the master bus. So I cleaned off the main hard drive and thought since it was working correctly I could transfer the system & apps to the other hard drive and save the working disk image. But of coarse in the middle of transferring files around the combo drive vanished again and the super drive won’t read files correctly. So I decided to reinstall from my OS 10.4 DVD on the main hard drive and reinstall all my apps. But I can’t get it to read or boot up from the DVD. I tried running Tech Tool again with no luck.
Could this be as simple as a bad preference or something?
Here are the machine specs
Machine Name: Power Mac G4
Machine Model: PowerMac3,6
CPU Type: PowerPC G4 (2.1)
Number Of CPUs: 2
CPU Speed: 867 MHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 1 MB
Memory: 1.75 GB
Bus Speed: 133 MHz
Boot ROM Version: 4.4.8f2
PowerPC G4 dual 867 Mac OS X (10.4.8)The only thing that seems strange about it being the drives is that whenever the combo drive disappears from the menu the super drive will simultaneously not read files correctly and cause kernel panics etc. And when the combo drive can be seen both drives work with no problems. Would that system still point to failing hardware? It just seems that since it's either both or neither that something that effects them both would be the culprit. Since I posted I was able to reload tiger & after the restart the problem returned. Then another restart it was fine all day. To your point replacement drives are reasonably priced & easy to install so I probably should just get one & try it.
Thanks for your advise
Carl -
URGENT-- cannot see sql modeler contents (xml file)
All,
I have tried to open up a model which has been developed with earlier versions of sql modeler.
below, I have copied the contents of the calling XML file for your comments,.
it seems like 2.xx version and somehow it shows empty.! I searched through the sub folders and there are 100s of xml files.
I tried 1.5.x and latest version of sql modeler no luck so far. what am I missing or any workaround please..
thanks
ali
========================
*<?xml version="1.0" encoding="UTF-8" ?>*
*<model version="2.0">*
* <version version="3.2" design_id="C6FFE67F-9E2B-07CE-8B7A-C790E645720B" />*
* <object>*
* <comment></comment>*
* <notes></notes>*
* <alter type="created">*
* <user>hdai</user>*
* <timestamp>2009-05-31 08:30:30</timestamp>*
</alter>
<alter type="changed">
<user>hdai</user>
<timestamp>2009-06-22 10:17:09</timestamp>
</alter>
</object>
<engineering_params delete_without_origin="false" engineer_coordinates="true" engineer_generated="true" show_engineering_intree="false" apply_naming_std="false" use_pref_abbreviation="true" upload_directory="" />
<eng_compare show_sel_prop_only="true" not_apply_for_new_objects="true" exclude_from_tree="false">
<entity_table>
<property name="Name" selected="true" />
<property name="Short Name / Abbreviation" selected="true" />
<property name="Comment" selected="true" />
<property name="Comment in RDBMS" selected="true" />
<property name="Notes" selected="true" />
<property name="TempTable Scope" selected="true" />
<property name="Table Type" selected="true" />
<property name="Structured Type" selected="true" />
<property name="Type Substitution (Super-Type Object)" selected="true" />
<property name="Min Volumes" selected="true" />
<property name="Expected Volumes" selected="true" />
<property name="Max Volumes" selected="true" />
<property name="Growth Percent" selected="true" />
<property name="Growth Type" selected="true" />
<property name="Normal Form" selected="true" />
<property name="Adequately Normalized" selected="true" />
</entity_table>
<attribute_column>
<property name="Name" selected="true" />
<property name="Data Type" selected="true" />
<property name="Data Type Kind" selected="true" />
<property name="Mandatory" selected="true" />
<property name="Default Value" selected="true" />
<property name="Use Domain Constraint" selected="true" />
<property name="Comment" selected="true" />
<property name="Comment in RDBMS" selected="true" />
<property name="Notes" selected="true" />
<property name="Source Type" selected="true" />
<property name="Formula Description" selected="true" />
<property name="Type Substitution" selected="true" />
<property name="Scope" selected="true" />
</attribute_column>
<key_index>
<property name="Name" selected="true" />
<property name="Comment" selected="true" />
<property name="Comment in RDBMS" selected="true" />
<property name="Notes" selected="true" />
<property name="Primary Key" selected="true" />
<property name="Attributes/Columns" selected="true" />
</key_index>
<relation_fk>
<property name="Name" selected="true" />
<property name="Comment" selected="true" />
<property name="Comment in RDBMS" selected="true" />
<property name="Notes" selected="true" />
</relation_fk>
<entityview_view>
<property name="Name" selected="true" />
<property name="Comment" selected="true" />
<property name="Comment in RDBMS" selected="true" />
<property name="Notes" selected="true" />
<property name="Structured Type" selected="true" />
<property name="Where" selected="true" />
<property name="Having" selected="true" />
<property name="User Defined SQL" selected="true" />
</entityview_view>
</eng_compare>
<changerequests id="" />
<design type="Data Types" id="2391D8C8-FEC6-9182-ED6C-6EAE53428D29" path_id="0" main_view_id="420C75F3-BD6B-8126-6EBA-050A1FC9BE54" should_be_open="true" is_visible="false">
<name>DataTypes</name>
<comment></comment>
<notes></notes>
</design>
<design type="LogicalDesign" id="4A0EEC77-6A89-10AC-351F-172AA6998230" path_id="0" main_view_id="83AB3B8B-90C4-D6A9-291D-A65F781E85D9" should_be_open="true" is_visible="true">
<name>Logical</name>
<comment></comment>
<notes></notes>
</design>
<design type="RelationalModel" id="1214B08E-6B1C-9449-2769-131F7637FD5C" path_id="1" main_view_id="11A685B9-D950-8186-6160-DDAD08DAC3C0" should_be_open="true" is_visible="false">
<name>SMARTD</name>
<comment></comment>
<notes></notes>
</design>
<design type="RelationalModel" id="A61B461D-F897-0CBF-3924-4BC3D33F3D13" path_id="2" main_view_id="2F6C7BB5-3F13-8657-DD84-BAFEF664D2D8" should_be_open="true" is_visible="false">
<name>SMARTD(2)</name>
<comment></comment>
<notes></notes>
</design>
<design type="Process Model" id="7B21085F-9F75-F895-17AA-32592475602A">
<name>Process Model</name>
<comment></comment>
<notes></notes>
</design>
<design type="Business Information" id="C0C1E8B7-7CDE-F345-C446-412C87D12639" path_id="0" main_view_id="null" should_be_open="true" is_visible="false">
<name>Business Information</name>
<comment></comment>
<notes></notes>
</design>
<domains>
<domain name="defaultdomains" role="uses" />
</domains>
</model>Philip:
here is the Log file ( running modeler 2.0). hope it helps.
thx
ali
================LOG file==========
2009-12-02 13:53:34,312 [main] INFO ApplicationView - Oracle SQL Developer Data Modeler Version: 2.0.0 Build: 570
2009-12-02 13:53:36,890 [main] WARN AbstractXMLReader - There is no file with default domains (path: domains name: defaultdomains)
2009-12-02 13:54:58,390 [Thread-3] ERROR FileManager - getDataInputStream: Can not read data
java.io.FileNotFoundException: D:\1D_data\LADPSS\docs\reference\data_model\data_model\relational\1214B08E-6B1C-9449-2769-131F7637FD5C.xml (The system cannot find the path specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.dbtools.crest.model.persistence.FileManager.getDataInputStream(Unknown Source)
at oracle.dbtools.crest.model.persistence.FileManager.getDataInputStreamWithoutExtension(Unknown Source)
at oracle.dbtools.crest.model.persistence.XMLPersistenceManager.getInputStreamFor(Unknown Source)
at oracle.dbtools.crest.model.persistence.xml.AbstractXMLReader.getInputStreamFor(Unknown Source)
at oracle.dbtools.crest.model.persistence.xml.AbstractXMLReader.recreateDesign(Unknown Source)
at oracle.dbtools.crest.model.design.relational.RelationalDesign.load(Unknown Source)
at oracle.dbtools.crest.model.design.Design.openDesign(Unknown Source)
at oracle.dbtools.crest.swingui.ControllerApplication$OpenDesign$2.run(Unknown Source)
2009-12-02 13:54:58,390 [Thread-3] ERROR AbstractXMLReader - Data inputstream is null (path: data_model/relational name: 1214B08E-6B1C-9449-2769-131F7637FD5C)
2009-12-02 13:54:58,390 [Thread-3] ERROR FileManager - getDataInputStream: Can not read data
java.io.FileNotFoundException: D:\1D_data\LADPSS\docs\reference\data_model\data_model\relational\A61B461D-F897-0CBF-3924-4BC3D33F3D13.xml (The system cannot find the path specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.dbtools.crest.model.persistence.FileManager.getDataInputStream(Unknown Source)
at oracle.dbtools.crest.model.persistence.FileManager.getDataInputStreamWithoutExtension(Unknown Source)
at oracle.dbtools.crest.model.persistence.XMLPersistenceManager.getInputStreamFor(Unknown Source)
at oracle.dbtools.crest.model.persistence.xml.AbstractXMLReader.getInputStreamFor(Unknown Source)
at oracle.dbtools.crest.model.persistence.xml.AbstractXMLReader.recreateDesign(Unknown Source)
at oracle.dbtools.crest.model.design.relational.RelationalDesign.load(Unknown Source)
at oracle.dbtools.crest.model.design.Design.openDesign(Unknown Source)
at oracle.dbtools.crest.swingui.ControllerApplication$OpenDesign$2.run(Unknown Source)
2009-12-02 13:54:58,390 [Thread-3] ERROR AbstractXMLReader - Data inputstream is null (path: data_model/relational name: A61B461D-F897-0CBF-3924-4BC3D33F3D13)
2009-12-02 13:54:58,390 [Thread-3] ERROR FileManager - getDataInputStream: Can not read data
java.io.FileNotFoundException: D:\1D_data\LADPSS\docs\reference\data_model\data_model\processmodel\7B21085F-9F75-F895-17AA-32592475602A.xml (The system cannot find the path specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.dbtools.crest.model.persistence.FileManager.getDataInputStream(Unknown Source)
at oracle.dbtools.crest.model.persistence.FileManager.getDataInputStreamWithoutExtension(Unknown Source)
at oracle.dbtools.crest.model.persistence.XMLPersistenceManager.getInputStreamFor(Unknown Source)
at oracle.dbtools.crest.model.persistence.xml.AbstractXMLReader.getInputStreamFor(Unknown Source)
at oracle.dbtools.crest.model.persistence.xml.AbstractXMLReader.recreateDesign(Unknown Source)
at oracle.dbtools.crest.model.design.process.ProcessModel.load(Unknown Source)
at oracle.dbtools.crest.model.design.Design.openDesign(Unknown Source)
at oracle.dbtools.crest.swingui.ControllerApplication$OpenDesign$2.run(Unknown Source)
2009-12-02 13:54:58,390 [Thread-3] ERROR AbstractXMLReader - Data inputstream is null (path: data_model/processmodel name: 7B21085F-9F75-F895-17AA-32592475602A) -
PC People cannot see my Quicktime converted WMV file
I'm running QT Pro and Flip4mac studio. I've converted a QT file to a WMV file. When I post via iweb, my client using their explorer browser gets this: install activex control 'quicktime' from apple computers.
My clients are not going to download software. Although we all know QT is better. I thought WMV files play on PCs. That's why I went to the trouble of converting the file...
Any ideas on how I can solve this?
CheersPost a URL so we can see the page code.
I thought iWeb only wrote page code that called the QuickTime plug-in. -
Cannot see Windows PC on MAC (files or printer)
I am new to MAC and am trying to add new macbooks to a PC network running Vista. Everything is networked via ethernet cable and a router. I have an HP Color Laserjet 2500 hooked up to one of the PCs and downloaded the mac drivers from the internet. The file and printer sharing works fine between the PCs and the PCs can see the MACs but the MACs do not see the PCs. When I try to set up a printer and go to the Windows option, nothing is there to choose. The connection between the computers is there because they can share the internet connection and I pinged from both mac and PC and it was fine. How can I get the MACs to see the PCs and share printers? Please help.
The fax should be treated the same as a printer.
I'm not familiar wit that specific printer, but if it works like most other fax software, you should be able to select print, then instead of sending to the printer proper, you select the fax function from inside the print dialog.
scanning is a different critter altogether - the scanner software may not like (or even recognize, for that matter) scanning to/from IP. I know on our big copiers at work, network scanning takes additional configuration on the copier itself.
Perhaps your printer is similar? -
Hi,
I want to delete duplicates from my iTunes music but and iTunes help says to click on "Display Exact Duplicates" in File men but I don't appear to have this function. Where else can I look?Thanks Kappy. I had just found it but thanks reply. Next question is: Is there a quick way to then delete the duplicates without having to select each one and delete?
-
Cannot see iPod in iTunes any longer.
Here is our version of iPod: U2 version: serial number JQ446QG0S2X Model: M9787LL
I am using iTunes 7.7.1 (11)
Our computer is a Powerbook G4
Version OSX 10.4.11 (Panther - I think)
When we plug it in, the icon does not come up in the Devices/Library area any more.
We are not sure why this occurred. Any advice would be greatly appreciated.
Thanks.Hello and Welcome to Apple Discussions...
FYI: Version OSX 10.4.11 (Panther - I think) *10.4.11 is Tiger*
And... when your iPod acts up... try resetting it. Here are the instructions:
http://www.apple.com/support/ipod/five_rs/ipod5gen/
Carolyn -
TS3642 Sorry, but when I click on the app, nothing happens and I cannot see my song. Any help?
?
Hey there, just sync your iDevice with PC >> go to apps section and scroll down the page, it's hidding, haha
Maybe you are looking for
-
ABAP Development standards for HR- ABAP
Hi ALL Does any body has any document for Programming standards in HR ABAP programming. Thanking in advance for you support. cheers AJ
-
What is the Best Way to Re-Image and Re-Install Snow Leopard on MacBook Pro
Hello, Is there a well documented best practices procedure for re-imaging and re-installing Snow Leopard on a MacBook Pro? Thank you for any assistance. Tony
-
My computer crashed and now I can't use my licence key anymore
Hi Last Week, my computer crushed (not for the first time). I had to reinstall everything. After I've put le licence key, the system asked me to unlicence the other computer, however I have no computer with an installed creative suite. How can I get
-
Help with MovieClipLoader please :D
Hi, I have this preloader and in the last frame I want to load another swf. So, in the last frame on a new layer I put the following code I found on the net: var dmcMovieClipLoader = new MovieClipLoader(); dmcMovieClipLoader.loadClip(" http://vague.a
-
I havent used my iPod Mini in about a year, but last time I was on it worked. I have tried almost everything.