Colour profiles within PS are off for one monitor only?

Hi guys,
I'm having a very strange issue with colour management in Photoshop CS2 currently.
Photoshop seems to be calibrating all documents in a strange way on only *one* monitor. If I drag the file across to the other monitor the colour is completely different.
Of course it sounds like my monitors being off, however when dragging the file across monitors Photoshop slowly updates the colours for the next monitor. You can see it display the wrong colour at first, then correct it (hopefully that makes sense).
Another symptom of it is when I go to 'save for web'. Here, the colours revert to what I believe are correct.
b It's worth noting that this has only started to happen since some Windows updates. One being an option update from Dell for my monitor - I can't seem to find any information about it though!
My tester that I've been using is a plain white to black gradient. What I'm seeing is a lot of cyan in the middle of the gradient. I've saved off an example:
http://2dforever.com/photoshop.png
As you can see, all the greys are very green, but if you look at the gradient tool in the toolbar itself, the grey appears fine.
I'm unsure how I can adjust the colour profile from Photoshop for one monitor - am I missing something really obvious here?
Just to note: I'm on Win Xp SP2, Photoshop CS2, and I've cleared the preferences.

Since you only mention Photoshop as having a problem, this is almost
certainly, as you suspect, a monitor profile config problem.
Color profiles for individual monitors are configured in
Start>Settings>Control Panel>Display>Settings>(Advanced Button)>Color
Management.
In Settings, click on the monitor whose profile you want to verify before
clicking on the "Advanced..." button. I would start by adding and
defaulting the profile for the monitor that is causing problems.
The Microsoft XP color control panel applet makes setup easier, though it
is not really necessary. If the link below fails, google for keywords
Microsoft XP color control panel applet.
http://www.microsoft.com/downloads/details.aspx?FamilyID=1e33dca0-7721-43ca-9174-7f8d429fb b9e&displaylang=en

Similar Messages

Birthdays are off by one

I am syncing my Hotmail contacts to my iPhone 4, and the birthdays are all off by one day on my phone (one day later than they should be). I check them in Hotmail and all is correct, but when accessing the contacts on my phone or in my calendars, they are off by one day. I am running the most recent software update for the phone (updated 11/8/12) and have upgraded to the current version of iTunes. I have had the problem for several months now, and can't seem to get rid of the problem. Any suggestions for a fix? Thank you!

Not that I've found, unfortunately. Apple must be too busy to bother with getting their calendars to work properly! Sorry...

Appointments are off by one hour

after syncing my i-phone my i-cal shows the appointments as one hour later. I-phone still shows them correctly. I checked and my macbook pro is set for EDT just like my i-phone.
Any solutions?

Should be an issue with the time zone settings on all Outlook clients involved.
Has Gmail/Yahoo account mentioned here been configured into Outlook clients?
If you are using Outlook 2010 you need to use a time zone with the correct DST settings for your location. If your location does not observe DST, do not choose a time zone that does then deselect the option to automatically update for daylight saving time.
You need to use a time zone that does not observe DST.
http://www.slipstick.com/outlook/calendar/meeting-requests-and-appointments-are-off-by-one-hour/
Kapaal

Two idocs are created for one output message type

hi all,
we are communicating our sap idocs to external system using ALE.It is working smoothly.
Our problem raises here,
.idocs are creating at the time of output type attachment for purchase orders.But rarely,two idocs are creating for one message type.It means two idocs are created for same Purchase order.It makes complications for the external system.
anyone can help me pls?
thnks in advance..........

thanks jurgen for ur reply,
jurgen, the second idoc is not an "ORDCHG",It is the replica of first idoc.This one has also "ORDERS" message type.The only difference between these idocs are the time.It means the difference between the time field segments of these idocs have only three(3)seconds difference.We think that its from the system error.If it is not from the system error pls give me the explanation.
thanks in advance.......

Tecra S3: battery fully discharged if it's off for one week

I´ve got a Tecra S3:
Intel® Centrino? Mobiltechnologie Intel® Pentium® M Prozessor 760
XP Pro/ 1024 DDR2/ 80GB/ 15.0" TFT/ DVD-Super-Multi(DL)/ Wi-Fi
Mostly I work with ac power. Only sometimes I need the battery.
But when I use the battery, discharge it fully.
After that the battery is charged over night.
When my S3 is off for one week,
my battery is fully discharged and the S3 needs ac power.
Is that normal?
Why is my battery fully discharged
if the S3 is off for only one week.

Hi
The fact is that battery looses the energy also if the notebook is disabled.
Im not sure about the time and how long should it takes.
The same thing happens on my old Satellite A50.
I thing it depends from the battery performance and how old the battery is.

Settlement rules are permitted for one WBS

Hi Friends,
Would like to know how many settlement rules are permitted for one WBS Element , We have a need for over 200 Settlement rule.

Hi Friend,
Limitation of the number of settlement rules is 999.
The Notes 483600, 31721 and 720619 describe the issue. The technical restriction to 999 distribution rule groups can not be changed.
Regards Bernhard
Edited by: Bernhard Kirchner on Dec 17, 2010 11:09 AM

HT204019 Can I turn off the ringtone for one contact only?

Is it possible to turn off the ringtone for one contact only? The block feature won't work because I still want to be able to receive voice messages from this particular contact.

You can assign a silent ringtone to that one person. Google to find such a ringtone, sync it to the phone, assign the custom ringtone to this person and when they call, the phone will appear not to ring.

Value help does not work for ONE person only !

Hi,
we have a strange problem. In the Web IC, we are using a standard value help for the country field for a Business Partner. This works fine for everyone (ie, it picks up the country and slots it into the field) except one person. For her, it never returns any value into the country field. We are guessing that it's not Web IC related but is something in her browser settings etc...but haven't been able to pin it down. Can anyone offer any advice on this ?
thanks for looking.
Malcolm.

Hello Malcolm,
If this error occurs for one user only it's definitely related to the clients PC.
Did you already delete all temporary files and the cookies on that PC? Usually this does the trick!
If this does not solve the problem, try to let that particular user login on another PC where the problem does not occur. (If the error does occur on another PC too it's probably profile/authorization related)
Hope this helps!
Regards,
Joost

I have an epson xp600 and a mac book pro. Wireless printing is OK if I'm lucky for one time only then a 'failed to connect' message so I have to delete and re add the printer to get it working again (but just once!) then the same occurs. Why?

I have an epson xp600 and a mac book pro. Wireless printing is OK if I'm lucky for one time only then a 'failed to connect' message so I have to delete and re add the printer to get it working again (but just once!) then the same occurs. Why?

I am not certain this will fix your problem but I suggest you assign the printer a static IP address.
Using the printer's front panel, select Menu > Network > WLAN > TCP/IP > Boot method, and change it to "static". Provide a static IP address that is on your LAN's subnet.
For example, if you are using an AirPort Extreme, you might give it an IP address of 10.0.1.100. If you are using a Netgear or Linksys router that defaults to issuing 192.168.x.x addresses, you might give it an address of 192.168.1.100. That way, the printer will always "reside at the same address" on your network. If your router has the ability, you should reserve that address so that the router does not attempt to assign it to another DHCP device.
Then, go to System Preferences > Print & Scan, and delete your existing printer with the "–" (minus) button. Add it again, using the "+" (plus) button. In the window that appears, select the IP pane, and from the Protocol menu select "Line Printer Daemon (LPD)". In the Address field type the IP address you gave your printer.
If all goes well the "Pring Using" field will detect the printer at that address and automatically select the appropriate driver. You will see something similar to the following screenshot ("name" can be whatever you decide, and "location" is optional):
Click Add, then you can close System Preferences.
There are other possible reasons your printer is "not responding" which could include wireless interference from competing wireless networks, but try this "static IP" method first. It should mitigate the problem.

Is it possibel to create one connection [pool for one report only

Hi is it possibe to create one connection pool for one report only. Others report are running from the another connection pool under same DB.
Thanks,

Hi,
Why do u want seperate connectionpool for that single report?
I dont think its possible.Direct database request will be good solution for this.Try importing those columns which are used to build that report into physical layer and create new subject area.Not sure weather its right way to do.
Regards,
Srikanth

Maintenance orders are created for FL/equipment only ?

Hi all,
"maintenance orders are created for FL/equipment only".
How can i to understander this sentence, i use t-code: iw31 to create a maintenance order, and the 'Assembly' field can be entered. so how can i to create a maintenance order just for FL/equipment only ?
Thanks and best regards,
Ivy Lu

Hi Praveen,
It's not a message. i got this sentence from the following information:
Q7: When you maintain an assembly in a piece of equipment, is it possible to get maintenance history of the assembly? Do you have to create it as a piece of equipment?
A7: As maintenance orders are created for FL/equipment only, maintenance history can only be tracked at that level, not at assembly level. Assemblies are mere structuring devices to have spare parts linked to an equipment in a structured manner. However, in PM orders, you can mention the assembly along with the FL/Eq. Depending on your reporting needs, an ABAPer could use the 'PM Assembly' field in PM orders.
Best regards,
Ivy Lu

Change colour profile on export of jpeg for using files on windows pc

My father, who is 80, has a mac and aperture.
He is reasonable proficient using it, but as a windows user myself I'm unsure of the in's and out's of things and it always falls on me to help him when he has a problem.
He also has a windows computer, which he has a programme on for making calenders.
The problem we have is that when he saves his photo's after editing in aperture to a dvd, he puts this dvd into his windows pc and he cannot see any of the previews.
On opening up any picture in photoshop on the pc, it asks if he wants to use the embedded colour profile or change it.
I'm wondering if Aperture is exporting using a certain profile which windows cannot read? Thus doesn't show the preview.
He needs the preview to pick which pictures he wants to use on the calender.
He then stores all his pictures on the dvd.
I'm pretty sure he shoots as jpegs, not raw. Though I need to ask him.
He has several different cameras, and I think he has trouble with all of them. I'm pretty sure one is a nikon d5300 (I just googled red body nikon)
Is there a colour profile for aperture when saving as a jpeg that is compatible with windows?
It's a hundred mile round trip to visit and to then sit down and try to work it out by trial and error would take some time.
So if I can find an answer and call on the phone to tell him what to do, it'd save me a lot of time
I'm not sure what Mac he has, what OS he's using or which version of Aperture, he only recently bought it, so guess at the latest one.......... I know I'm a great help !!!!!
I can find out if needed, but thought there might be an easy fix....... I know, whenever is there an easy fix for anything!!!
Cheers,
Graham

There is no standard for a 'Preview'. It's a feature of the software that is opening a file as to how it shows those files to the user for selection. Some software will look in the file header for a thumbnail, some will use the files associated icon (if it has one) and some will just present a list of file names. I seriously doubt changing the colour profile output by Aperture will have any impact on this.
Although Aperture doesn't have a calendar feature, iPhoto does and as of the last year or so, Aperture has an option to open it's library in iPhoto. So if he has a current enough version of Aperture and iPhoto, he could avoid the issue altogether if he is happy to switch into iPhoto to make the Calendar.
If he wasn't using DVD (say a USB thumbdrive instead) he could run a utility on the PC to create icons for the files where the icon is a thumbnail of the picture, which the calendar software might then use when prompting for images to load. But the use of DVD complicates this, as it depends on the DVD drivers and file systems in use on the DVD.
Chances of resolving this remotely, remote
Andy

Colour profiles of images are removed by Muse

Muse removes the colour profile of images when resizing or cropping them. Apparently, colour profile is preserved when image is in original size.
This is a MAJOR ISSUE not solved in more than eight months since it was reported.
Muse is useless for an artist to display his work if colours are displayed incorrectly.

Some browsers support color management and some don't. In order to have image color preserved across browsers you'll want to save your images using a sRGB color profile. If another color profile is used and the browser doesn't support color management, color shifts will occur.
If the images are already sRGB and you're still seeing a color shift, it would be helpful to have the URL for a page that demonstrates the problem. Thanks.

Date range parameters are off by one day

I have a Start Date and End Date parameter in my SSRS report. The results are off by 1 day. For example if I enter 4/2/2015 and 4/20/2015 it will return a few results from 4/1/2015 to 4/19/2015. I think maybe it's a problem with my date
conversion in T-SQL, but thought someone more experienced than me would have seen this before.
Thanks

Yes
The safest way to write a date range comparison would be as below
WHERE DateField >= @StartDate
AND DateField < DATEADD(dd,1,@EndDate)
If you want results with @EndDate inclusive
see more details here
http://visakhm.blogspot.ae/2012/12/different-ways-to-implement-date-range.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Is it possible to turn off iMessage off for one individual during group text?

Can I turn off iMessage for individuals who use the iPhone and IOS 5 but do not have their iMessage setting on? I want to group text with two other people. They both have IOS 5, but one does not use iMessage. She can't recieve the group text unless I turn my iMessage off for everyone. Is it possible to turn off iMessage for one individual for a group text?

Have you set font smoothing in Appearances (System preferences) to match your monitor?

Colour profiles within PS are off for one monitor only?

Similar Messages

Maybe you are looking for