Colour Swatches not Consistent
I've been experiencing weird result when I copy a pattern from a illustrator file to another: the pattern would change the colours itself! Even when I save the original swatches of the colours and open them in the second file, the colours changed too!
Does anyone know why? Sometimes the colours are find but sometimes not...it seems the colour swatches are not consistent between the files...
Thanks!
Some colours of the pattern adopted the colours(swatches) of the other pattern I pasted previously.
The colours are "linked" to the swatches so I could change the colour just by adjusting the swatches. Placing the second pattern should create another complete set of swatches but it didn't. The problem is that the swatches were changed when placed in the second file and became complete different colours.
As you can see in the images I attached, the yellow stripes in the first image became white in the second one.
These patterns are imported from a disc of a pattern book I bought. They came as eps files. I wonder if that's related...
Thanks!
Similar Messages
-
Garbled Screen & not consistent colours on Equium M40X-230
Hi, I have a M40X-230, a couple weeks ago I started to see a garbled screen where the colours were not consistent and the screen looked as if it was vertically chopped in 3 and all three parts were blending in and out of each other.
This lasted about 10-15 minutes and it persisted through reboot. However, this would not happen everytime the machine was used. After another week or so when the machine was started even the Toshiba splash screen is broken up as described above, this persists when in BIOS config (hit F12 at startup).
The machine is able to boot in safe mode but the same problem occurs and when an external monitor is attached the problem is seen on the attached screen as well.
Has anyone seen this before? Any advice, I am thinking it is my graphics adapter or maybe the LCD but really not certain.
salleyneHi mate,
this sounds cleary like a hardware malfunction. If you have already the symptoms at the toshiba logo, then I would recommend you to contact urgently a ASP for a hardware checkup because this error cannot be resolved with an bios/software update.
Check this link for the nearest availabel ASP in your country:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
Good luck and nice weekend -
How to delete a spot colour swatch set up incorrectly
Hi i'm running indesign CC2014 and having problems deleting a spot colour swatch 877 initial set up incorrectly as a lab spot colour, rather than choosing from the colour books
I've since converted it to a processed lab colour and still it won't delete. I also can't i find the colour and where it is used in my document.
I've tried to add metallic coated 877c (correctly this time) swatch again but it won't allow two swatches with the same name.
Can anyone help as i really need to correct this for the printers.Is there anyway to find this out as i'm dealing with a 60 page brochure and not easy to manually find.
You can use the preflight panel to find all instances of a spot color.
In the lower left corner of the doc window you can define a preflight profile and apply it to the document:
Here I've made a profile named No Spots with Spot color checked under Color Spaces not Allowed
With Preflight on the profile will list any placed objects using a spot. in this case a PS monotone named Untitled-1 -
Having trouble with my colour swatches
I have pushed/activated/deactivated something in my colour swatches and I am no longer able to select a colour from here. There is a whiteish line under the individual colours and I can not select a colour. Please help, what have I done?
That model is on the support site.
LED TV 55SL417U
You can't get the HD versions of the standard 3-45 channels, or you can't get those channels at all?
- Peter -
Organising Colour Swatches Tab/Palette
Hi everyone
Re: InDesign CS5 colour swatch palette/tab.
I do artwork for two monthly magazines which consist of editorial and paid advertisements. These ads are either designed by me or supplied by customers and change regularly. Over the years of receiving artwork in various formats - pdf being the most common, my swatches palette has grown to be almost out of control. Every month I do a sweep of the swatches, removing unused and converting any spot to cmyk manually (I have had transparency issues with spot colours), but my main issue is with the jumble of colour swatches. I know if I create a new document and import all the swatches from the previous month issues, the swatches will arrange themselves in order - all PMS colours together, all cmyk colours together etc, but as I don't necessarily want to create new artwork each month I open up last month's doc and strip out old text, ads and replace with the current monthly info.
Is there any way I can arrange my swatches in order?
My screenshot only shows half of the swatches in the palette.
I would be really grateful if someone could show me how to fix this, I accept that I may have some bad working practices going on here.
Thanks, LizMake sure you save each swatch or swatch combination as an ACO file. Use the dropdown menu near the top right of the swatches panel.
You can then load named swatches, or replace the default swatch with a named swatch - using the sme dropdown menu.
You can also download swatches designed by others from the Kuler website.
https://kuler.adobe.com/#create/color-wheel/ -
Photoshop CC. Colour selection not working when using alt and brush.
Hi, Photoshop CC. Windows 8.1 64 bit. Colour selection not working when using alt and brush. I have tried rebooting and other things like closing swatch panel etc.
The alt key is otherwise OK. It's not the recent upgrade from Win 8 to 8.1 (5 days ago) because the colour selection facility was working yesterday. Any ideas.I'd say things sound desperate enough to try resetting Preferences
Reset Preferences
Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
Mac — Hold down Shift Cmd Opt immediately after starting Photoshop
If that fails, we need to know your operating system?
Do you have a full CC subscription, or by apps do you mean Photoshop, Bridge and Lightroom?
Another other information that might pertain ? -
Has anyone else had a swatch not show up when a picture box is selected
I am having an issue with swatches in inDesign CS3, we have a background with a feather so the box fades from grey to white, the grey needs to be a specific CMYK breakdown which we have created in the swatch palette. However when we come to check the image is the correct colour (we have had occurences where documents have gone to print with the incorrect colour) sometimes when you select the box it shows up as the colour in the swatch pallette but sometimes it doesn't and no colour is selected, you then have to go to the tool box and double click the fill colour to check the breakdown which can still be correct but why does it not show up in the swatch pallette sometimes but not others? This is becoming a real issue as we have a lot of previous documents that need to be checked and it is not easy to do and not always that accurate.
Any advice would be greatly appreciated, thanksHello John, thanks for your reply, sorry if my post is unclear, I will try to explain it a bit more precisely.
Regarding your reply, I wonder if that may be the problem that a colour has been previously been created by clicking on the colour in the tool box rather than creating a swatch. I have only recently started at the company so was not involved in the creation of the original documents so that could be the case.
Basically several documents have been created for a client by different employees, these have then been repeated over many different pieces of artwork. It was recently discovered that some printed copies had come out a different shade of grey to the others.
So every time we use a previous piece of artwork or create something new we need to ensure the grey is the correct CMYK breakdown to match their corporate standards.
The issue is with the background colour which is created using the rectangle frame tool, filled with a solid grey and then using a gradiant feather to make it fade to white. Why this wasn't done using the gradiant tool I dont know and perhaps this is the problem?
So when opening old documents to check the colour this is when the problem occurs as we click on the box and no colour shows up in the swatch pallette, I have created a colour swatch, closed the document and on re-opening the document the same thing occurs.
We have a large quantity of documents that need to be checked and we need a precise and accurate way of ensuring the gradiant colour is correct for future use.
Is there any preference to using a solid colour and feather or the gradiant tool?
And any advice as to why the issue with the swatch pallette would happen would be greatly appreciated.
Thank you for your time, Jackie -
Satellite L755-1HW - colours do not look natural on display
I recently bought Toshiba Satellite L755 and I'm generally pleased with it. It's an upgrade from my Toshiba Satellite L300.
However I have an issue with the way it displays colours. At first glance everything seems ok, but then again some colours do not look right.
For example, gold on my old Toshiba looks 'gold'; on the new one it's kind of yellowish and generally, yellow seems to dominate in some ways and red is often not truly red.On the other hand, the old Toshiba seems to have a better picture; better contrast and more natural well saturated colours with no issues as above.
The colours on the new display look like they've been filtered and have some kind of tinge of an unidentified colour. I compared a number of photos on both laptops and the difference is consistent.
My L300 runs on default settings; the only thing I adjusted is brightness. I tried adjusting settings on my L755; brightness, contrast, hue, gamma, saturation but without any improvement.
I've done colour calibration and when I get to the 'shades of gray' they seem fine like everything else in this test and yet something's not right. I would appreciate any advice and I hope it's not just a poor quality display.
I cannot connect the laptop to another display, but I can paste screendumps if needed.Connecting an external monitor would be a good test, but as I said at the beginning I don't have vga cables. I can compare colours on my old and new toshiba.
Perception of colours might obviously be subjective and without comparing, many would find nothing wrong with the colours on my new toshiba. However, I can tell warmer shades from colder ones and it's ultimately me using the computer.
I made a trip to a computer shop and looked at a number of different laptops and it's really difficult to see much difference in colours looking at e.g. Windows 7 sample pictures. In fact, when I look at them on my computer they seem OK and not different to what I saw on other laptops at the shop. It's only when I copied them to my old toshiba that I saw the difference.
Of course, you may say it's my old toshiba that shows colours wrong, but I'm sure you'd agree with me if you saw the difference. The colours are natural and warmer, something I cannot say about achieve on my new toshiba.
I used to have an excellent Samsung external LCD monitor and when I bought my old toshiba I was mostly disappointed with sharpness and angles compared to the samsung. Now this time it's the colours, notably yellow just like in the case of the person whose link I pasted. For them the problem disappeared after moving from intel (with HD Graphics 3000 as I checked) to AMD. That's why I asked about your card and impression.
Also, have you compared colours on your laptop with another one (older model) or connected it to an extenal monitor/tv? -
After REFRESH the cached object is not consistent with the database table
After REFRESH, the cached object is not consistent with the database table. Why?
I created a JDBC connection with the Oracle database (HR schema) using JDeveloper(10.1.3) and then I created an offline database (HR schema)
in JDeveloper from the existing database tables (HR schema). Then I made some updates to the JOBS database table using SQL*Plus.
Then I returned to the JDeveloper tool and refreshed the HR connection. But I found no any changes made to the offline database table JOBS in
JDeveloper.
How to make the JDeveloper's offline tables to be synchronized with the underling database tables?qkc,
Once you create an offline table, it's just a copy of a table definition as of the point in time you brought it in from the database. Refreshing the connection, as you describe it, just refreshes the database browser, and not any offline objects. If you want to syncrhnonize the offline table, right-click the offline table and choose "Generate or Reconcile Objects" to reconcile the object to the database. I just tried this in 10.1.3.3 (not the latest 10.1.3, I know), and it works properly.
John -
My iphone 4s voice dictiation for text messages is not consistently working. I've had the phone since Thanksgiving and it always worked perfectly, but the last few weeks it's been hit or miss. Sometimes it works, sometimes it doesn't. Anyone else having this problem? I tried the hard reset but that hasn't fixed it.
I have the same problem since updating to IOS 8.3. Any app to which I want to send a new link via IMessage does not allow me to select a contact to send the IMessage to. Using a pre-existing thread does not have same problem.
-
Airport Extreme Not Consistently Assigning DHCP
I am using a relatively new (within the last year) Airport Extreme as the primary router on my home network. Connected directly to the router is a GigE switch, an AT&T Microcell, and another router - an Aruba RAP which creates a secure VPN for my home/remote office network. The connection to my Apple desktop is made through the GigE switch, as are three additional wired connections to other devices in my home, including two Apple TV's and (hopefully) two Airport Expresses.
I recently discovered when trying to configure a new Airport Express to extend my wireless network over ethernet (roaiming network) that my Airport extreme is not consistently assigning the IP addresses within it's defined DHCP range (10.0.1.0 - 10.0.1.200). About half of the time devices on the network are getting a default 169.254.x.x IP address, which (in the case of my desktop) results in an 'self assigned IP' error within the network settings. I can reboot my apple desktop and the next time it gets a correct 10.0.1.1 address. Reboot again, it defaults back to a 169 address - and so on. It doesnt seem to make any difference if I connect my desktop directly to the Extreme, or, if I connect it through the GigE switch. And, every time I get a 'self assigned IP' I have no connectivity beyond the Extreme (no internet), and I'm forced to use my wireless/Airport connection.
Another problem here is that the Expresses both expect to receive 10.x IP addresses and when they don't get one, they basically become pretty $100 paperweights when connected over ethernet. Also, if you try to configure a new Express without the 10.x address it expects to be assigned (and defaults to a 169.x), the Airport Utility will no longer 'find' the Express once the Express auto-restarts and the update will fail. I learned this after spending two hours on the phone with Apple support yesterday - during which they were able to get my first generation Express configured, but, not my 24-hour old second Generation Express, which continues to act only as a paperweight. Oddly enough, everything works perfectly well if I use only wireless connections to the Extreme - there are no IP problems and everything works correctly. Unfortunately, I want to use wired connections for all my devices (expresses, Apple TV's) because we stream alot of audio and video.
Is my Extreme not working correctly? Does anyone think it's problematic to have a second router (the Aruba) connected behind the Extreme? I suppose I could force some components to use only specific IP's, but, that sounds like a pain. If the Aruba is problematic, I would also consider a second internet connection, or, finding some way to split home IP traffic vs work IP traffic.
Thoughts?I've been doing some research and it appears the 'self assigned IP' address is a common problem in the Apple support community. And, for what it's worth, it appears an inability to isolate or accurately troubleshoot the problem - by users or Apple tech support - is a recurring theme. I totally understand that no two home networks are exactly alike (different ISPs, switches, configurations, etc.), but, after being a die-hard PC user for my entire life I can honestly say I never encountered anything like this while using my PC. I'm not about to trash my Mac, but, the Apple 'ease of use' selling point is quickly losing it's lustre.
I got into this mess because I added a GigE switch to my network. Rather than buy a different switch (a tactic which assumes my problems are being caused by the switch) I'm inclined to buy another Airport Extreme and try daisy-chaining them together to overcome the reason I bought the GigE switch in the first place, which is not enough ethernet ports on the Extreme. That, or I'll spend a weekend in my attic re-wiring my home network to daisy-chain my two Express devices together instead of requiring individual connections to my router. My experience with Apple hardware thus far is that it prefers to 'play nice' with other Apple hardware over non-Apple hardware. It could be $100 error on my end (or, a weekend of not doing yardwork), but, I think it's the best shot. Other possible fixes, including manually assigned IP-addresses, put too much emphasis on software and network configuration - which (by my non-scentific analysis), are two areas even harder to troubleshoot.
I'll let you know how it goes.
Mh
Post Script - Dear Apple: please find a way to significantly increase the number of ethernet ports on your Airport Extreme Router. Thank you. -
GR/IR Clearing Account 2..... Not Consistent
SAP Experts,
I blocked GR/IR clearing account temporarely while I updated the open line item field. It turns out that after I finish running the program and unblocked the account. Receiving ca no longer receeive into teh account it says "G/L Accuont 2...... Not Consistent"
Does anyone knows what could possibly be?I was able to go into IMG bring the field " Only Balances in Local Currency" then went into account brought it to a "ZERO Balance" with TCODE FB50. Went into FS00 and updated field. Then reversed entry, and it works fine.
-
Business partner of organizational unit is not consistent
Hi,
Client is on SRM 4.0. When we are trying to search a user in the org structure, and when clicking on "Check" for this user, it was showing fine. But when we are searching any BP in the org strucutre, then immediately the BP name is vanishing against the BP of the user and when doing the "Check" it is showing the below two messages:
Business Partner of organizational unit XXXXXXX is not consistent
User cannot be repaired becasue the organizational unit contains errors
When checking in BBP_CHECK_USRES, the user is not showing as defective. It is green.
Similarly, the the organizational unit check is also showing as green.
System is advising to run BBP_BP_OM_INTEGRATE. When we run this for the org units, these are coming as green.
Users are able to create the shopping carts and also are able to create confirmations. But the problem is happening for some of the users where the system is not allowing to create shopping basket / confirmation.
Strange thing is that, when we are searching the user by user id in the org structure, then the check is showing no messages. But if we search the same user using the BP number, then in the check, the messages are coming. And once the messages appear, it is appearing for all the users in the org strucutre even at the root node level.
Any help is highly appreciated.
Thanks & Regards,
AswiniHi Aswini,
There are some possibilities to raise these kind of errors messages:
1) User with inconsistent data.
Please, check the instructions described in the following notes:
597475 - Repair users with inconsistent address data
-> use the report B_REPAIR_EBP_USER_2 to make the user consistent.
419423 - Repairing incorrect EBP users
350129 - Creating business partner for organizational unit
When you create the Org Units have you fully completed the address
data, e.g post coe, telephone/fax number etc..
If not, please enter a full address, save the data and see if this
generates the Business Partner.
Remember, that you can delete this user and create a new user.
2) Error in the positions after HR replication
Please, implement the following notes and retest the scenario:
1056873 - Incorrect SRM users after HR distribution
1016450 - Replication of persons deletes positions in SRM
After implementing these notes you should send the employee
corresponsing to the user in error with his position (using
transaction PFAL or report RHALEINI in UPDATE mode for all periods.
3) the user was deleted and a new was created and during these two
actions the user opened documents. So, in this case, the new user
becomes inconsistent
If the user is deleted from SU01 still the BP and S which is related to
that user will be retained (we can see this in PPOMA_BBP) transaction.
In this case we can create the user again using SU01 and can be attached
with the old 'S' and 'BP'.
2. If the user is completed deleted ie., all relations BP and S.
The new user has created.
In this case if the new user is corrupted we can delete this
user (since the new user doesn't create any documents so far). But the
old documents should refer to the new BP related to the new user.
========================
Also, another option would be to follow the below instructions
After applying the notes 1056873 & 1016450, send the employees
corresponding to the users in errors with their positions (using
transaction PFAL or report RHALEINI in UPDATE mode for all periods,
using evaluation path A008) ? If not, please do this and it must repair
the SRM users. Please test and give me the feedback.
Hope this helps,
Kind Regards,
Matthew -
Hi
When we are processing MIGO for a PO we are getting error message GL ac so and so in not consistent and if I double click on that message below detial message is getting displayed:
This line item carries the "W" posting line identification. The master record for GL Account 2150000 in company code 1000 must have the "balance only in local currency " indicator if the W identifier is set.
What is "W" posting line identification. Please let me know the solution for this issue
Regards
Padma.Hi,
As this error is pertaining to GL master check this account under FS00 and tick "only balance in local currency" as it is your GR/IR clearing account which should be managed as open item basis.
Moreover, also make sure field status to this GL (for line item) and of account group (obd4) are in sync.
In OBYC, you have assigned this account under your wrx i.e. GR/IR clearing.
Hope above will help you.
Regards,
Valay Pandya -
Metadata of Controller EMPTYVIEW Is Not Consistent.
Hi,
After upgrading NW04s from SP07 to SP11, one of my web dynpro for ABAP application gives the following error on execution.
I am also getting a system dump. I have checked all the necessary services in SICF & most of the required services are active. Does any one have some idea of how I can resolve this error.
Error when processing your request
What has happened?
The URL http://ustca644.kcc.com:8086/sap/bc/webdynpro/sap/zvmkc_tsvm_main/ was not called due to an error.
Note
The following error text was processed in the system PGW : Metadata of Controller >EMPTYVIEW< Is Not
Consistent. "View Controller" Does Not Contain a "View"
The error occurred on the application server ustca644_PGW_20 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CONTROLLER_KIND_TO_TEXT of program CL_WDY_RG_META_SERVICE========CP
Method: CONSTRUCTOR of program CL_WDY_RG_CONTROLLER==========CP
Method: GET_CONTROLLER_PARTS of program SAPLWDR_RUNTIME_REPOSITORY
Method: SAVE_COMPONENT of program SAPLWDR_RUNTIME_REPOSITORY
Method: SAVE of program SAPLWDR_RUNTIME_REPOSITORY
Function: WDR_SAVE_REPOSITORY of program SAPLWDR_RUNTIME_REPOSITORY
Method: SAVE of program CL_WDR_RR_DB==================CP
Function: WDY_WB_GENERATE_INTERNAL of program SAPLWDY_WB_ACTIVATION_SERVICES
Function: WDY_WB_GENERATE of program SAPLWDY_WB_ACTIVATION_SERVICES
Method: CONSTRUCTOR of program SAPLWDR_RUNTIME_REPOSITORY
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system
PGW in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on
the application server ustca644_PGW_20 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work
process 0 in transaction ST11 on the application server ustca644_PGW_20 . In some situations, you may also need to analyze
the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 400 -u: C14216 -l: E -s: PGW -i: ustca644_PGW_20 -w: 0 -d: 20070222 -t: 222514 -v: RABAX_STATE -e:
UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
System Dump
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_WDY_RG_MD
Date and Time 02/22/2007 22:25:14
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_WDY_RG_MD' was raised, but it was not caught anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_WDY_RG_META_SERVICE========CP' has to be
terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WDY_RG_MD', was not caught and
therefore caused a runtime error.
The reason for the exception is:
Metadata of Controller >EMPTYVIEW< Is Not Consistent. "View Controller" Does
Not Contain a "View"
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_WDY_RG_MD"
"CL_WDY_RG_META_SERVICE========CP" or "CL_WDY_RG_META_SERVICE========CM001"
"CONTROLLER_KIND_TO_TEXT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "ustca644"
Network address...... "165.28.85.39"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "PGWA"
Database type..... "DB2"
Database name..... "PGW"
Database user ID.. "SAPR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Oct 30 2006 00:08:55"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "DB2CLI.DLL 08.02.0003 "
Patch level. 83
Patch text.. " "
Database............. "DB2 for OS/390 7.1, DB2 for OS/390 8.1, DB2 for OS/390
9.1"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 16192
EM...... 16759360
Heap.... 0
Page.... 0
MM Used. 12837904
MM Free. 3918160
User and Transaction
Client.............. 400
User................ "C14216"
Language Key........ "E"
Transaction......... " "
Program............. "CL_WDY_RG_META_SERVICE========CP"
Screen.............. "SAPMHTTP 0010"
Screen Line......... 2
Information on Caller ofr "HTTP" Connection:
Plug-in Type.......... "HTTP"
Caller IP............. "165.28.239.30"
Caller Port........... 8086
Universal Resource Id. "/sap/bc/webdynpro/sap/zvmkc_tsvm_main/"
Information on where terminated
Termination occurred in the ABAP program "CL_WDY_RG_META_SERVICE========CP" -
in "CONTROLLER_KIND_TO_TEXT".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 20
of the (Include) program "CL_WDY_RG_META_SERVICE========CM001".
Source Code Extract
Line
SourceCde
1
method CONTROLLER_KIND_TO_TEXT .
2
3
data:
4
cref_View type ref to cl_wdy_md_view,
5
ctlr_Type type Wdy_Md_Controller_Type.
6
7
ctlr_Type = controller->get_type( ).
8
9
case ctlr_Type.
10
11
when wdyn_ctlr_type_custom.
12
controller_type_as_text = 'CUSTOM'.
13
14
when wdyn_ctlr_type_view.
15
controller_type_as_text = 'VIEW'.
16
if ( ABAP_FALSE eq Controller->Has_View( ) ).
17
" view controller must have a view
18
gi_Cx_Text = Controller->Get_Name( ).
19
gi_Cx_Hint = '"View Controller" enthält keine "View"'(NVW).
>>>>>
raise exception type Cx_Wdy_Rg_Md
21
exporting
22
TextId = Cx_Wdy_Rg_Md=>Controller_Data
23
Controller = gi_Cx_Text
24
Reason = gi_Cx_Hint.
25
26
else.
27
gi_Cx_Text = Controller->Get_Name( ).
28
if ( gi_Cx_Text eq 'EMPTYVIEW' ).
29
return.
30
endif.
31
32
" sanity check against illegal CL_WDY_MD_EMPTY_VIEW
33
try.
34
cref_View ?= Controller->Get_View( ).
35
if ( cref_View is initial ).
36
gi_Cx_Text = Controller->Get_Name( ).
37
gi_Cx_Hint = '"View Controller" enthält keine "View"'(NVW).
38
raise exception type CX_Wdy_Rg_Md
39
exporting
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
1
SY-TABIX
2
SY-DBCNT
0
SY-FDPOS
7
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
HTTP Control
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20070222
SY-UZEIT
222514
SY-XPROG
SY-XFORM
Active Calls/Events
No. Ty. Program Include Line
Name
22 METHOD CL_WDY_RG_META_SERVICE========CP CL_WDY_RG_META_SERVICE========CM001 20
CL_WDY_RG_META_SERVICE=>CONTROLLER_KIND_TO_TEXT
21 METHOD CL_WDY_RG_CONTROLLER==========CP CL_WDY_RG_CONTROLLER==========CM001 25
CL_WDY_RG_CONTROLLER=>CONSTRUCTOR
20 METHOD SAPLWDR_RUNTIME_REPOSITORY LWDR_RUNTIME_REPOSITORYF11 684
LCL_SAVE_REPOSITORY=>GET_CONTROLLER_PARTS
19 METHOD SAPLWDR_RUNTIME_REPOSITORY LWDR_RUNTIME_REPOSITORYF11 91
LCL_SAVE_REPOSITORY=>SAVE_COMPONENT
18 METHOD SAPLWDR_RUNTIME_REPOSITORY LWDR_RUNTIME_REPOSITORYF11 29
LCL_SAVE_REPOSITORY=>SAVE
17 FUNCTION SAPLWDR_RUNTIME_REPOSITORY LWDR_RUNTIME_REPOSITORYU02 27
WDR_SAVE_REPOSITORY
16 METHOD CL_WDR_RR_DB==================CP CL_WDR_RR_DB==================CM002 3
CL_WDR_RR_DB=>SAVE
15 FUNCTION SAPLWDY_WB_ACTIVATION_SERVICES LWDY_WB_ACTIVATION_SERVICESU04 279
WDY_WB_GENERATE_INTERNAL
14 FUNCTION SAPLWDY_WB_ACTIVATION_SERVICES LWDY_WB_ACTIVATION_SERVICESU01 84
WDY_WB_GENERATE
13 METHOD SAPLWDR_RUNTIME_REPOSITORY LWDR_RUNTIME_REPOSITORYF12 77
LCL_REPOSITORY=>CONSTRUCTOR
12 METHOD SAPLWDR_RUNTIME_REPOSITORY LWDR_RUNTIME_REPOSITORYF01 17
LCL_COMPONENT=>CONSTRUCTOR
11 METHOD SAPLWDR_RUNTIME_REPOSITORY LWDR_RUNTIME_REPOSITORYF01 669
LCL_COMPONENT=>IF_WDR_RR_COMPONENT~GET_USED_COMPONENT
10 METHOD SAPLWDR_RUNTIME_REPOSITORY LWDR_RUNTIME_REPOSITORYF01 245
LCL_COMPONENT=>IF_WDR_RR_COMPONENT~CREATE_COMPONENT_USAGE
9 METHOD CL_WDR_MESSAGE_WINDOW=========CP CL_WDR_MESSAGE_WINDOW=========CM001 30
CL_WDR_MESSAGE_WINDOW=>CONSTRUCTOR
8 METHOD CL_WDR_APPLICATION_WINDOW=====CP CL_WDR_APPLICATION_WINDOW=====CM00K 6
CL_WDR_APPLICATION_WINDOW=>INITIALIZE
7 METHOD CL_WDR_CLIENT_COMPONENT=======CP CL_WDR_CLIENT_COMPONENT=======CM004 59
CL_WDR_CLIENT_COMPONENT=>DISPLAY_TOPLEVEL_COMPONENT
6 METHOD CL_WDR_CLIENT_APPLICATION=====CP CL_WDR_CLIENT_APPLICATION=====CM00L 30
CL_WDR_CLIENT_APPLICATION=>INIT
5 METHOD CL_WDR_MAIN_TASK==============CP CL_WDR_MAIN_TASK==============CM00I 40
CL_WDR_MAIN_TASK=>EXECUTE
4 METHOD CL_WDR_MAIN_TASK==============CP CL_WDR_MAIN_TASK==============CM00J 69
CL_WDR_MAIN_TASK=>IF_HTTP_EXTENSION~HANDLE_REQUEST
3 METHOD CL_HTTP_SERVER================CP CL_HTTP_SERVER================CM00I 524
CL_HTTP_SERVER=>EXECUTE_REQUEST
2 FUNCTION SAPLHTTP_RUNTIME LHTTP_RUNTIMEU02 929
HTTP_DISPATCH_REQUEST
1 MODULE (PBO) SAPMHTTP SAPMHTTP 13
%_HTTP_STARTHi Kim,
Please try the following:
Try to reactivate the component
If this does not help, please create an OSS ticket and the SAP colleagues will help you to fix the problem. Please add exact information about the component and open a connection to your system.
Ciao, Regina
Maybe you are looking for
-
Configure CRS2008 to using AD and Kerberos with Java application servers.
Hi All, I have configure CRS2008 to using AD and Kerberos with Java application servers. Domain Controller is installed on W2K3 Server. In addition, CRS2008 is installed on another W2k3 Server. I have create service account in domain controller: CMSA
-
Hi Guys, What does Table Type mean? What are uses of Table Type? Regards, Chandru
-
The cluster network name is not online
Our cluster is a four node, Windows Server 2012 failover cluster running Hyper-V role only. Today it starts throwing the error 'The cluster network name is not online'. The IP is online (and all the VMs are running) but migrations fail and any scri
-
Upgrade from 4.0b to ecc 5.0
Hi all, My company is upgrading from 4.0b to ECC 5.0. So, can anyone let me know what problems we would be encountering and what is the best method to resolve such problems. I would like to know how both versions are mainly different ? My company
-
Each time I turn on ipad it is Telling me siri not available connect to to the internet
each time I turn on ipad it is telling me siri is not available connect to the interner. also I cannot slide to open