Colours differ between image in PS CS4 and final saved image

Hi
Having an issue that is probably colour prifile ralated, but its got me stumped - i've tweeked everything to no avail!
(See system specs at bottom of post)
Ok, so IN photoshop itself, I open an image taken on my Nikon D300, which is set to Adobe RGB, the images are not RAW, just JPG.
In Windows itself the photos look ok, pretty faithful to the screen on the camera, however when i open one in PS, it is hugely over-saturated.
I have a nice photo of some red chillies on a green plate, looks good, lots of detail in the reds and greens, when viewed in windows preview, OR IN Internet explorer - and being a web designer - internet explorer is my baseline.
Once opened in PS, the red seems to be just pure RGB red... well not that extreme but close to.
If i soft proof, this helps a bit, but if i then save the image again, the resulting image is dull, and flat, (FAR duller than the soft proof) etc etc..
If someone can answer this id be very greatful
System:
Macbook with nvidia 9400 graphics (latest drivers) running Windows 7 (32 bit)
SCREEN CALIBRATED with a HUEY pro
CS4

I suggest you recalibrate again and make sure the resulting profile is saved in the correct place.
Also in case it's a Mac issue, you would be better off posting in the Mac forum.
http://forums.adobe.com/community/photoshop/photoshop_macintosh

Similar Messages

  • MTO(Diff between complex make to order and sales order based mass prod)

    Hi
    We are using MTO...Can anyone tell me what is the Diff between complex make to order and sales order based mass prod in finance perspective?

    Hi,
    In the case of complex make to order scenario, through MRP, the Project shall be assigned to the sales order. Then there will be milestone billling and all. In the case of mass production MTO, it is only creation of production order for each sales order item and each sales order item shall have sales order cost estimate.
    Trust this helps much and do encourage our efforts!
    Cheers!
    Edited by: Ashok Singh on Oct 28, 2008 6:53 PM

  • What is the Diff Between tcodes WE19 in XI and WE19 in r/3 sys

    Hi all,
    Can anyone tell me
    What is the Diff Between tcodes WE19 in XI and WE19 in r/3 sys?
    one more question I have a File>XI->IDOC scenario
    the file is picked up from the sender sys
    but not posted the IDOC to the receiver sys
    I need to post that particular record to r/3 sys can any tell me how to post the record.
    Thanks
    Sai.

    SAP PI  alo have ABAP stack part of PI server, so we will have all trasaction codes in PI too(ECC trasaction codes),the use of WE 19 in ECC to reprocess IDoc to external partner system.
    WE 19 tx in PI also same purpose if you are using PI ABAP stack for creating and processing IDoc's,but we never use it.
    You hav to build mapping logic to suppress unwated data and create IDoc in ECC.
    Regards,
    Raj

  • Diff between R/3 Internet sales and CRM  Internet sales

    Hi every body!
    Could any body tell the basic Diff between R/3 Internet sales and CRM  Internet sales.
    Thank you,
    mark..

    Hi Markiv
    Just to round that off, the ERP version lacks:
    - Rule based ATP (with APO)
    - Customer specific product numbers
    - Web based catalog management
    - Support for further e-Service processes
    Cheers
    Dom

  • Diff. between image copy and backup set ?

    Hi,
    i hv problem some interview question just like
    what is difference between image copy and backup set?

    below there is exact answer for your question
    http://download.oracle.com/docs/cd/B19306_01/backup.102/b14192/bkup001.htm#sthref281

  • Diff between AD.I.6(3180816) and AD.I.6.DELTA(6502079) patches

    Hi Hussein
    As part of the database upgrade, pre-req is AD.I.6 , but AD.I.6.DELTA(6502079) was already installed. Can I considered as AD.I.6(3180816) is available and skip the AD.I.6 patch.
    Thanks
    Reddy

    It will be awesome, if you explain the diff between delta patch and the patch.
    Please see (What is the difference between the Patch 6502079 - 'AD.I.6 Delta' and the Patch 6502082 - 'AD.I.6' ? [ID 836418.1]).
    Thanks,
    Hussein

  • Diff between Oracle 8.1.7 and Oracle 8.1.7.4

    Hi all,
    I'm trying to find the differences between Oracle 8.1.7 and Oracle 8.1.7.4. Can anybody give some inputs regarding this.
    Thanks in advance.

    Hi Justin Cave,
    Thanks for your reply. But where can I download that README txt. I dont have access to metalink, can I get that README txt anywhere other than metalink. Please let me know.
    Gopal Mani

  • Diff between GR based invoice verification and PO based invoiceverification

    Dear Friends
    Can any body pl clarify the difference between the GR based I V and
    PO based I V and how to configure the above.
    regards
    rk

    Hi,
    Gr Based Invoice Verification :  In this a separate invoice item is created for each delivered partial quantity.If we make the allocation with the purchase order system then propose more than one invoice item as a default if more than one partial delivery has been posted for the po item.
    If we make the allocation using delivery note the system proposes exactly the po items from this goods receipt, plus the the quanties posted.
    using gr based we can assign each invoice item uniquely to a good receipts item. Good receipt and invoices matched in po history
    In Gr based invoice qty should not be greater than actual delivered qty.
    Purchase Order Based Invoice Verification :  In this system generates one invoice item in the item list for each po item. The system provides quantity to settle in as difference between total d livered qty and thee total invoice qty.
    If we make allocation using delivery note the system determines the relevant po items with their total qty to settle-in the same way as if there was a reference of purchase order.The system will not propose qty relevant in delivery note.
    If there are several good receipt the purchase order history will not tell you which invoice came from which vendor.
    Br,
    Tushar Patankar

  • Working with AE CS4 and Final Cut Pro

    Hi all,
    I've been doing a lot of projects recently working between AE CS4 and FCP.
    All the work I've been doing has been animation based and all projects have been HD. I've been rendering out clips of up to a minute from AE as .mov with H.264 codec and then putting them in FCP to edit together.
    The problem that I'm having is that quite often FCP runs slowly once there are a lot of mov files in the sequence. It also crashes when there is a long (50 seconds, so not really that long!) .mov clip in the sequence. I was just wondering if there is a better way for me to be rendering these clips out for use in FCP. Obviously they need to stay at a very high quality.
    Any help would be much appreciated,
    Thanks,
    - Lewis

    As Andrew said, simply use different CoDecs and don't get miserly on file sizes. Simply buy another harddisk, if you run out. H.264 is very processor intensive and even the most beefy MacPro with FCP3 can only decode so many such files in realtime. For ProRes, Todd provides additional guidelines on his blog, but of course other CoDecs shoulkd work as well.
    Mylenium

  • Massive Colour Shift Between Stills (both JPEG & TIFF) and Motion

    HI There,
    I'm having a lot of trouble getting still images in Motion/FCP/Quicktime to look as good as they do in Photoshop/Preview or even the Finder.
    I'm guessing this is a colour space issue but I can't find any colour space controls for Motion.
    Has anyone else come across this?
    You can see the difference here:
    Here's the JPG which looks like this in Photosop, Preview and in the Finder:
    Here's what the same JPG which looks like in Motion, FCP & Quicktime:
    Any help would be much appreciated.
    Cheers

    Is it in RGB to start with? That would be my guess. It should be RGB the whole way through.

  • Diff between images as .png

    Hi Adobe Forum users,
    I am trying to export the difference of two images as a png for use by another program.
    One image is of a room with lights off, the second image is of the exact same room with lights on (everything lines up perfectly as they are CAD/rendered images). Is it possible to extract the difference (essentially just the effect of light) and place it onto a new layer with transparency?
    I need to save this difference layer as a png and be able to overlay it on the image with lights off in the other program.
    Thanks in advance,
    Julian

    Hi, thanks for your reply,
    Yes I suspected as much.
    The images are for a home automtion interface where multiple lights come on in a scene. Since there are multiple lights in the scene and each one can be individually switched I cant simply overlay one image. I need to overlay multiple images, one for each light circuit and these require alpha channels so other light images shine through.
    It becomes difficult when multiple light effects overlap in the scene.
    If your manual method could be useful in this situation please do explain further.
    My Initial thought was that photoshop can detect the difference in two images and combined the images and exclude the difference. As far as I know it can then also isolate the difference but not with transparency. For my purposes I suppose it needs to be able to detect what colour pixels are in the 'lights off' image and what colours it needs to overlay to create the same effect as the 'lights on' image. . . but place these on a separate layer or as a colour overlay of some sort.
    Maybe I am just expecting a little too much...
    Thank you for any help!
    Julian

  • Diff between Component controller,Custome controller and  View controller

    hi,
        Can any body tell me the following details,
    1.difference between the Component controller,Custome controller and  View controller in WD-ABAP.?
    2.what is Lead Selection?   
    Regards,
    Ravi

    Hi Ravi.
    The component controller is visbile to all views in a component. So all context nodes and methods you create here can be accessed from all views in the component. This way you can share data between the views by mapping context nodes or thru method calls. You can also mark methods and nodes as interface so that they are acessable from other components that define component usages to this cmponent.
    Custom controller is quiet similar to the component controller. You can define it if you want to group some views with a custom controller for a certain functionality.
    If you want to access a custom controller in a view you have to define the usage first on the properties tab of the view.
    A view controller is only visible in the view itself. So all methods or context nodes you define here are only accesable by the current view.
    The lead selection is in most cases the current selected element in a context node. The lead selection is used by many UI elements to determine which element has to be shown (e.g drop down).
    If you have a table with single selection the current selected table row is the lead selection element of the bound context node.
    SO you can get the lead selection element easily in any mthod by calling context_node->get_element( ).
    Hope this clears your questions.
    Cheers,
    Sascha

  • Diff between oracle 8i sql Engine and oracle 9i sql Engine

    hi,
    1)Can anyone tell me difference between oracle8i sql engine and 9i sql engine.
    2)Does oracle 9i uses the index defaultly if any primary key is there in table
    Thanks
    Rama

    > 1)Can anyone tell me difference between oracle8i
    sql engine and 9i sql engine.
    They are different versions.
    If you have been expecting a list of differences and enhancements and new product features... forget it. It will take several pages to list. Rather refer to the 9i product feature sheet.
    > 2)Does oracle 9i uses the index defaultly if any
    primary key is there in table
    Huh? Oracle will use an index if it determines that it costs less to use that index to get to the data, than not using an index.

  • Whats the diff between copying a Transport request and Importing a request?

    Hi gurus,
    Can some one explain me the difference between copying a transport request between clients and importing transport request between clients? say for eg: difference between copying a transport request containing a datasource being copied from client 100 to client 200 and importing the same request from client 100 to client 200?... When do we follow such scenario's?
    thanks.
    kishore

    Hi Kishore,
    A request copy applies only for customizing (client dependent) objects.
    A request tracks object modifications since its last transport. if the object is created in source system and included in a transport request, when it is transported to another system, it will create the object in target system. Then if you modify the  object, it will include modifications since last transport.
    As i said, a request copy is only valid for customizing objects. This is entries in tables, you will see that you have two kind of requests, customizing and workbench. Workbench objects are client independent, so request copy doesn't applies.
    it's very important to keep the order of requests when you transport and also not to delete requests in any system.
    Hope this helps (and hope it is clear, if you have any doubt, just ask!).
    Regards,
    Diego

  • Re: Diff between Oracle Applications 11g rel1 and 11g rel2

    Hi ,
    Please guide me through some doc.Id which can tell me the difference between 11g rel1 and 11g rel2.
    Regards.

    This topic was discussed many times in the forum before, please see old threads for details.
    Technical Difference between 11i and R12
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Technical+AND+Difference+AND+11i+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Functional Difference between 11i and R12
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Functional+AND+Difference+AND+11i+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    AR in R12 and R11i
    R12 Content Documents
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Content+AND+Document+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

Maybe you are looking for