Colours do not Print correctly with Photoshop CS4
I am using the Adobe Master Collection CS4, and use an Epson RX650 printer, but for the life of me I cannot get Photoshop to print what is on the screen.
The prints are dark, and no where near the ones on the screen.
I am using genuine Epson Ink, and Premium glossy paper, so as to remove this issue, is this a case of my screen needing to be calibrated?
I have considered buying the Spyde Studio calibrator to ensure that this is correct, (do I need to?) and I have read as much as I can about setting up Adobe to manage the print settings and colours, but still no luck.
My current settings are as follows
In Adobe Bridge, my creative suit color settings are set to Europe General Purpose 2
The in Adobe Photoshop (version 11.0.1) I am selecting under colour management, Document Adoby RGB (1998), Photoshop handles colours, Printer profile is Epson sRGB Colour Space, Rendering intent is Relative Colourimetric, and I have ticked the following boxs, Blackpoint compensation, Match print colours, Gamut warning and Show paper white.
Can some one please advise me?
I too have had problems with prints being much darker than what I see on screen.
Below is my solution which works fairly well for color prints--not as well for grayscale.
I used the huey Pro monitor calibrator purchased only a couple of months back to make my prints look right and be consistent.
1. Use the huey to calibrate the monitor
2. From Photoshop (CS4), I select the ICC profile for my Epson 2200 printer and the paper being used. I then set up soft proofing in Photoshop (in the View menu) which allows me to see on screen how the image will be printed. Usually it is a bit darker than I like.
3. so I adjust the brightness such that in the soft proof view, the image appears as I wish.
4. There is more yet to do in that you have to set various settings for the print process like letting Photoshop manage colors, setting no color adjustment for the printer. And a few more minor settings regarding the printer
By the way, there is something wrong with the print driver for the 2200 in XP so that when you come to the last screen before printing, the print preview has a very red tint. You simply ignore that since the print has none of that. This is in XP. Possibly Windows Vista has a driver that doesn’t do that.
This has given me good quality consistent prints the first time they are printed—at least on the few I have done since getting the huey
Similar Messages
-
HELP- Printing Problem with Photoshop CS4
Hello Everyone,
I just bought the PHOTOSHOP CS4, and I am having problem when it prints. The image is not clear, it has dots (pixels). This computer where I installed this program is brand new. I have previously worked with Photoshop CS2 and never had an issue but was force to buy this new one because the computer that I bought has Windows Vista and CS2 is not compatible. I thought maybe the problem was my printer but is not I have a Brother HL-5140 (black and white). I have connected my old computer with the printer and the images print perfectly fine. I have printed photos and it prints clear. But this only happens with Photoshop CS4. It prints dots, can someone please help me. Is driving me crazy.Really I'd be willing to bet it's your driver under Vista.
I have the same problem using Vista and a older HP LaserJet, under XP and CS2 it prints well. Under Vista it's a bunch of dithered pixelated dots.
They want you to buy a newer printer. -
Printing problem with Photoshop CS4
Hello Everyone,
I just bought the PHOTOSHOP CS4, and I am having problem when it prints. The image is not clear, it has dots (pixels). This computer where I installed this program is brand new. I have previously worked with Photoshop CS2 and never had an issue but was force to buy this new one because the computer that I bought has Windows Vista and CS2 is not compatible. I thought maybe the problem was my printer but is not I have a Brother HL-5140 (black and white). I have connected my old computer with the printer and the images print perfectly fine. I have printed photos and it prints clear. But this only happens with Photoshop CS4. It prints dots, can someone please help me. Is driving me crazy.I haven't heard of anyone else with those specific symptoms.
But another poster has had problems with his Canon 9900 not printing (but no blank page).
The first thing to do is make sure you are using the Canon drivers and not the GutenPrint/GimpPrint drivers.
After that, you probably need to check with Canon. -
Printing Problems with Photoshop CS4
I am having problems printing with Photoshop CS4. When I go to print, I get a very small version of my created document. If the image is 8"x5", it prints 1"x2" in the upper left corner. I read other forum answers that said"delete the fax/printer" so it won't delete to the fax machine, but that doesn't work for me. Any suggestions to fix this?
Thanks.dumasmar,
Doesn't sound like a Photoshop issue.
What do the iPrint people tell you? I had never heard of iPrint before, had to Google them.
Incidentally, it's Photoshop not PhotoShop. -
Print issue with Photoshop CS4 and Officejet 6500
I have a Windows 7 Business 64 bits desktop computer. After installing the Officejet Pro 6500 multifunctional drivers all was working OK. Images were being printed nice and with the correct size using Windows print option. After installing Adobe CS4 suite, all images printed from windows or Photoshop have incorrect size (photoshop prints it smaller, about 33%, and on upper left corner of the sheet).
Photoshop sucks but Illustrator print fine. The only way I can print at the good size in Photoshop, it's when I select Microsoft XPS document writer as printer and print from there... Not very user friendly !!!
And yes, it was always the HP Officejet 6500 E709n fax selected by default by Photoshop instead of HP Officejet 6500 E709n !
Is anybody can say if it's an HP issue or an Adobe issue ??? Why Illustrator print fine and Photoshop don't ???
Thank's in advance.Deleting the fax printer associated with this device to allows correct printing is not an acceptable alternative for me.
If it is a printer issue, why I can print correctly from Illustrator ???
dec9 wrote:
Or: you can go into windows and select a default printer or then the one you use to print with in PS. Then when you are ready to print in PS select the printer. See if that works.
That's my normal configuration then I can't change nothing when all is ok.
Thank you very much for your answer ! Maybe anybody have an other solution or explanation.
Thank's for your patience. -
Printing problem with Photoshop cs4, need help
I'm using PS CS4, with a Canon Pixma iP4200 and Mac os 10.6.2. I CAN print from other programs such as TextEdit or Pages. And my printer prints a test page without any problems. However, when I try to print something from PhotoShop, the printer dialogue box opens, I see the image in the preview and the page rolls through my printer...without anything on it. Does anybody know the reason for this?? Thank you for your help.
I haven't heard of anyone else with those specific symptoms.
But another poster has had problems with his Canon 9900 not printing (but no blank page).
The first thing to do is make sure you are using the Canon drivers and not the GutenPrint/GimpPrint drivers.
After that, you probably need to check with Canon. -
Bridge and Camera Raw not installing correctly with Photoshop CS5
First time installing i got bridge to load, but camera raw did not work. I had the notice at the end of instalation that there were numerous errors with the intall, totalling 13.
Uninstalled, and tried to reinstall. I only got three errors, but now bridge is not on the computer or camera raw.
Fustrated, wondering if I should have gotten the disks intead of the online installer.Try running the Creative Suite Cleaner Tool and reinstalling. For everything else a look at the install logs would be required.
Mylenium -
Colors not printing correctly with c410a.
Estimated ink levels show all as almost full. Print quality diagnostic report does not show anything for cyan.
The troubleshooting steps in this document may help. Make sure the vents are not clogged on the cyan ink supply. If the previous does not resolve the issue this post may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
CS3 file not compatible with Photoshop CS4?
My son uses Photoshop CS3 at college. He worked all day on an image (120MB), and saved it on a USB stick. When opening at home with Photoshop CS4, the "Reading Photoshop format" appears, then an error message "Could not complete your request because the file is not compatible with this version of Photoshop."
He has been burned before by a USB stick, but all the other files seem OK.
Is there a solution to this?^First thing I did was make a copy.
QuickTime Picture Viewer (which seems to open other PSD files) says it is corrupted.
Adobe Bridge can read the metadata, gives no preview, and won't open the file.
Any other thoughts? -
I have download the latest software for Firefox and the HP P1505 printer, but the pictures within the web site print correctly. The text information is not printing correctly. Lots of spaces and the font is a mess. You can read the text information, but it is all over the page. Firefox did print with no issues before 4.0b12. It always worked with the version 3 of course. I really do not want to go back to 3 as 4 is better except for this issue.
This is a known issue in Firefox 4 beta 12. You could wait til' the RC comes out, or you could grab one of the latest nightly builds availible here that fix this problem: ftp://ftp.mozilla.org/pub/firefox/nightly/latest-mozilla-central/
Just a note though, nightly versions of firefox are generally less stable than betas or releases. I am waiting for the Release Candidate to come out myself. (Should be early next week) -
cd jewel inserts not printing correctly-only shows song title not artist and printing in portrait form where landscape form is required-pls help!
iTunes CD printing has been broken for several releases now. Some people have had success by directing the iTunes print output to a PDF file, and then printing the PDF.
-
Poor B&W print quality from Photoshop CS4
First a definition:
- Half-tone: this is a gray scale printing process that is required for an printer that can print only Black & White. It allows a B&W printer to be able to appear to have the ability to print grayscale. The higher the printer resolution, the less noticeable the half-tone dots or dithering will be.
The problem with Photoshop CS4 seems to be that, when you use it's print option, it's half-tone is very coarse and does not reflect the resolution capability of the destination printer, in my case, a LaserJet4. If I take the same print and print it from Bridge CS4, the half-tone is correct for the resolution of the printer and the print looks great. Also, from Photoshop CS4, if you do a save-as a .pdf and then print the .pdf, the print looks great, as well.
Keep in mind that the printer driver settings (which there are few) have not been changed during this testing.
My conclusion is that the problem is with Photoshop CS4 print option and I cannot find anyway in Photoshop to change the half-tone settings there. Further, if I use the exact same print with the exact same printer settings, it will print correctly from other graphics programs.
Any help with this would be greatly appreciated. In my lab, most of the printing is B&W for court exhibits and such.
Thanks, Jonathan
Image And Sound ForensicsZeno,
Ok. But the printer works correctly if I do a save-as .pdf and print the
pdf. Or do the same from Bridge. So, how can it be the printer or printer
driver when it works correctly elsewhere in Photoshop and Bridge?
Jonathan -
Help with add file name problem with Photoshop CS4
Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb -
I bought Web Creative Premium CS4 on Nov. 2007, with the hope and dreams that Photoshop CS4 could help me bring in a second income and help me with old family pictures. I wanted to install the product on another hard drive I had bought for my workstation computer. The hard drive is a western digital 150 gigabyte hard drive and I made a 40 gigabyte partition of free space for Photoshop CS4 to play on. At the time there were no advanced tutorials on advance installation of the product on another partition on the internet. CS4 was new on the market. I sent an email in to the forum and explained my disposition. I wrote an essay form question. Something to this affect. I would like to be able to install Adobe Photoshop CS4 to another partition, where CS4 can build out the configuration folder, the brush folder, the template folder, etc.. on another hard drive other than C:\ and the registry configuration can build out the proper configuration commands in the registry to point CS4 to those location on startup. After that long question I got a one sentence answer. “ Yes you can install Adobe Photoshop CS4 custom to any hard drive”. I assumed from the answer I was not dealing with an intelligent community, so I decide to just suffer the best I could. With over several updates and several re-installs of the product I have concluded that Photoshop CS4 is not user friendly. I go through a daily step of procedures, which gives me an outcome of a final product. Though Photoshop CS4 does not work in a perfect world, even though you pay your life’s dreams into it. I have to change my procedure steps every time after a new update is installed. Since I cannot get any help with this problem, or an advanced computer technician with a B.A. in Computer Science to help me. I see no other recourse in keeping this product, and would like to know how I can get a full re-fund. I have only made one digital print with Photoshop CS4. That took me one year to get the general ideas without any tutorials. I happened on some basic trail and errors to get an awesome outcome with layering and lighting effects. Just some general FYI on something’s I have noticed over the years, which changed. At one time I was able to create a new layer and the background would fill in automatically white. Now I have to do it manually and sometimes when I use the magic wand to copy an object to paste it to another layer, when I go to that layer and click on the object to move it. I move the whole layer. You have to laugh, because if you don’t you would probably want to run your fist through your 22’ wide LCD screen. Thanks for listening.
Best practice is to install PS CS4 on C drive. PS Expects certain files and folders to be on C drive. Since this is a user to user forum and we (I) don't work for Adobe you will have to call Customer service for a refund.
-
Hi,
The printer is aHP Officejet 6700 Premium.
The red color is not printing correctly it is printing as a maroon colour. All other colours seem okay. No error messages are appearing.
I have run the clean printhead pgm and no change.
Any suggestions?
ThanksCouple of things come to mind.
First, obviously, make sure it is a Geniune HP cartridge. I have seen other ink that is a little off in color.
Second, make sure it has nothing to do with the paper you are using. Print a test page (if you haven't already) on normal white paper, not photo paper or something else.
Third, if you have a features tab in the printer preferences, make sure in the color management field, that it is not set on some custom color profile or application controlled setting.
Hope that helps.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.
Maybe you are looking for
-
How do I remove my credit card details from my apple account?
How do I remove my credit card details from my apple account?
-
I have a mac computer 3.2 Ghz intel core i3 with memory 4GB 1333 MHz DDR3, I have recently purchased an new macbook and have yosemite software and iCloud . I can no longer us my mac to open up recent numbers documents from my macbook. I am unabl
-
Backup to my Nas suddenly fails
Timemachine has been running successfully for a couple weeks. Suddenly it stopped working. Target is a qnap TS-239 pro II with version 4.0.3 of the firmware on it, supposedly working as a timemachine target for mavericks. Well it was, untill now. Fi
-
OBI 11.1.1.6-Restrict visible application roles while sharing customization
Hi, I am trying to test the security around share customizations functionality accessed through (any)Dashboard -> Page Options -> Save Current Customization -> Save for Others -> Set Permissions -> (+)Add Roles/groups -> Search Application Roles Whil
-
Sales Order and Pick List reports will not attach to Email message
My client wants to email both the Sales Order and Pick List that is created from the Sales Order in the same email message. It appears that SAP B1 will not do this. Is this a bug or just the way B1 works. My client is running version 8.8 PL 19.