Colum Configuration in the Team Viewer iview

Hi Customizers/Developers,
We have been running MSS for some time on our portal, and just recently an issue has been raised by our customers. In the upper, right corner in the Team Viewer iview there is an icon leading to a new window where one can add certain information in the Team Viewer column (I think the window/icon is called something like Column Configuration). One of the options here is TO_ATTEND, but we want to remove this option.
Does anyone know where to change/custimize this?
I tried to look in the IMG -> integration with other SAP components -> business packages/functional packages -> MSS -> Object and data provider -> Define Columns. But I couldn't figure out quite what to do.
Have anyone else faced the same issue? What were your experiences?
Help is highly appreciated!
Many thanks!
Regards,
Stina.

Stina,
can you upload a screenshot
Thanks
Bala Duvvuri

Similar Messages

MSSTV001 - Delegating tasks using the team viewer iview.

We are setting up a proxy so that our highest level mangers will not have to do their own compensation planning through MSS. We found the user exit MSSTV001 to use for this purpose. Does anyone have experience in using this user exit?
I am looking for examples of code entered into: EXIT_SAPLHRWPC_TO_REMOTE_001 and EXIT_SAPLHRWPC_TO_REMOTE_002.
Any other helpful information is appreciated. I already have a sheet from SAP Online help that gives me a few details on what to do. It is called: Delegating tasks using the team viewer iview.
Points will be rewarded for any helpful answers.
Thanks,
Sara

Hi Gabriel,
Requirement 1
Thanks. I did so. Using this I can see the OrgUnit. However, this is the OrgUnit of MSS user. It remains same through out the program. It is unlike pernr which changes as the user clicks on different Employees.
My exact requirement is as below:
User will click on Employee Selection drop down box. After that he will select "Employees from Organizational Structure". Here organization structure will be displayed. Now the user will expand Org Structure. I want to know the Org Unit of different Organization as the user will go on expanding the Org Structure using the buttons
Requirement 2
User will click on Employee Selection drop down box. After that he will select "Employees from Organizational Unit". Now we can see the Go button. I have to write some code on the button. Where I can find the code for the button. I spent lot of time. I am not able to find out the exact place where the view for the button is located.
Please help.
Regards,
Gary

Team Viewer iView generating dump in R/3?

Hi All,
Whenever I select Team Viewer iView a dump is generated in R/3 as follows:
Syntax error in program "SAPLCK_EXTRACT_LEVEL2
The following syntax error occurred in the program SAPLCK_EXTRACT_LEVEL2 :
"Field "LVC_S_FC2_WAO" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement."
Error in ABAP application program.
"SAPLHRWPC_ATTSTATUS "
The backend is R/3 4.7 and EP 6.0 on WebAS 6.40.So let me to know that do I need some basic support packages for the same so that there are no dumps in R/3.
Regards,
Pavanmeet.

hi,
I was also facing the same problem. i was able to rectify it by making some adjustments in the customizing options (thats by changing the TMW-profile customizing for the screen area to 'TDTYPE')..
Here's how to do it:-
1) in IMG go to Time Manager's Workplace > IDs for Time Data > Assign Display of Time Data ID List to Profiles
2) here, choose your profile.
3) in the field selection option add a new row with value -- 'TDTYPE'
4) save the changes.
and hopefully ur problems should be solved...
Regards,
Sagar.

Dvloped the team viewer for nokia lumia 800

Devloper teams
plz devloped the team viewer for the nokia lumia 800 . coz not able to take the remote my pc

hi mate,
you willneed to contact the developer of this app, nothing else can be done, sorry.

How to find out OrgUnit from the MSS team viewer iview

Hi Experts,
Please refer following link:
https://wiki.sdn.sap.com/wiki/display/profile/HowtoreadinformationfromtheteamviewerinWeb+Dynpro
Using this link, I am able to find out the perno.
I have to find out OrgUnit of selected person. I did the mapping. I have also written following code:
String orgunit = wdContext.currentSelectedOrgUnitElement().getObjid();
wdComponentAPI.getMessageManager().reportSuccess("You have selected orgunit "+ orgunit);
However, orgunit value is always null
Can you please let me know how we can get the orgunit in this case?
Regards,
Gary

Hi Gabriel,
Requirement 1
Thanks. I did so. Using this I can see the OrgUnit. However, this is the OrgUnit of MSS user. It remains same through out the program. It is unlike pernr which changes as the user clicks on different Employees.
My exact requirement is as below:
User will click on Employee Selection drop down box. After that he will select "Employees from Organizational Structure". Here organization structure will be displayed. Now the user will expand Org Structure. I want to know the Org Unit of different Organization as the user will go on expanding the Org Structure using the buttons
Requirement 2
User will click on Employee Selection drop down box. After that he will select "Employees from Organizational Unit". Now we can see the Go button. I have to write some code on the button. Where I can find the code for the button. I spent lot of time. I am not able to find out the exact place where the view for the button is located.
Please help.
Regards,
Gary

Team viewer

i recently started working online and my boss asked me to install Team viewer. i installed as he said, and told him my user id and password as i had no idea regarding the team viewer scams. I logged into the site using his id and password and did the work he told me. there was no activity other than that on my computer which i could see. after that i exit from team viewer and threw it in trash and than empty the trash as well (i told him my concern and he said its fine delete it).... i didnt told him my any other information... is my system in danger? or are any files corrupted or imported during this time? or is it possible he took any of my financial information? and can he still access my computer? thanks...
urgent response needed...

Hi Mick,
The Team Viewer iView has one parameter used for this purpose, "SortCol". In that parameter you can enter the key (ID) of the corresponding column in SAP (after which the list should be sorted). Note that there has been bugs related to this funciton in older versions of the iViews.
BR,
Markus

WebDynpro ABAP + Team viewer integration

Hi All,
I have webDynPro ABAP application and a Enterprise Portal 6.0 SP2 with MSS package 6.0 installed on it. As you know there is a teamviewer iview on the left frame of portal and when you click on one person in the team viewer list and event is triggered and the program on the right frame get this trigger and changes its content accordingly. My question is how can the webdynpro abap application get the pernr clicked in the team viewer iview.
Thanks for replies

Hi, I have the same issue.
I need to capture the personal number selected in Team Viewer. Probably a Portal Eventing might be fired, but I need to know if someone knows whats the namespace and the name of that event. Or where can I find these information?
Thanks

Team Viewer Issue

How do I set up the Team Viewer in MSS?
I have set up the ODAP, but not sure how to link it to the Team Viewer iView in MSS with the relevant view (MSS_TMV_EE_DIR)?
Thanks

Using MSS ERP 2005 on EP 7.0
I have a requirement to design a page with the Team Viewer iView on the General Information Page. What I am trying to achieve is that if a manager selects an employee in the Team Viewer the employee profile iViews (General Data and Personal data which are dependent on the pernr that is passed from Team viewer) their information should appear in the same General Information Page.

Team Viewer and WebDynpro IView

Hi all,
I have a two iViews, the first I use a team viewer and the second a WebDynpro Aplication. I want selected a employee in the team viewer and pass your key in the web dynpro Iview.How can i proceed?
Thanks
Ivo

Thanks Armin!

Unable to see the employee photo in team view

Hey experts, we have been handling with an issue almost two days and still cannot find any solutions, in mss service of homepage the employee photo is not visible as you can see below, i know that there was a thread about the same issue and we did what they told and what the right answer was but still has the same problem, * we run the program that generate the url * all of our reletad service is active * we apply a note (employee photo not updated).
do we need to nakisa add on to see the photo or anything else that we can do,
Thanks in advance.
answers will be rewarded.

hi ,
i think ur missing some steps in the note as chk in se11 > T77TMCPIC_URLS > click on display and do as below ...if u follow as per screen shot below ...wait for some other experts reply on this....
next click on below button and log off and log -in and refresh the team view in portal

Team Viewer is missing from the Business Package

We are using ESS And MSS Business Package for ERP 2004 - But it seems that Team Viewer is missing.
I understand it is part of an older version of Business Packager.
But how can we implement it for BP for ERP 2004?

It's not in the BP for MSS for ECC5. You have to do a blended BP approach. You will need to install the earlier BP as well and then customize your MSS role to include the My Staff portions you need (like the Employee information screen that uses the Team Viewer). This is due to the fact that not all services had been ported over to WebDynpro for Java as of the ECC5 business package. There are SEVERAL other posts in here about doing it this way. Hope this helps.

ECC5 How to read the stored value from Team Viewer

Hi,
How can I pick up the stored value from the team viewer from within ECC5?
I would normally use FM 'HR_ASR_WDA_GET_EMPLOYEE' to read mem id MSS01 but this doesn't exist in ECC5.
All help appreciated.
Rob

Hi,
How can I pick up the stored value from the team viewer from within ECC5?
I would normally use FM 'HR_ASR_WDA_GET_EMPLOYEE' to read mem id MSS01 but this doesn't exist in ECC5.
All help appreciated.
Rob

Team Viewer in MSS not showing all the subordinates.

Hello Gurus,
In the Team Viewer in MSS , all the subordinates are not being displayed. Out of 7 subordinates only 4 are being displayed. This is an old MSS implementation (ITS based). Any suggestions.
Regards,
Sana

Hi,
Check all the relationships between the subordinates and the manager. The positions held by all the employees need to report to the chief position directly.
~Rajesh

Webdynpro and eventing from team viewer

Hi.
We are trying to add new fields to the MSS "General Data" iView (com.sap.pct.hcm.eeprofilegeneraldata.par) and are considering the following approaches:
1.) Write additional java code to retrieve the data we need and display it on the iview.
2.) Create a new iview from scratch using webdynpro.
At the moment we are leaning towards option 2 as we do not have much java experience and have found webdynpro relatively easy to use. But my question is....how difficult would it be for a webdynpro iview to pick up the eventing from the standard Team Viewer iview? I would want to make sure that when a user clicks an employee on the Team Viewer, his/her data would show up in the new webdynpro iview. Any details on how to go about this would be appreciated.
Thanks in advance,
Chris

Hi Chris
If you are creating a new iview from the scratch to display the details you had to have the epcf subscribe function. Here you get the parameter passed from the first iview. For this the raise event have to be fired from the MSS iview. So in the Msssiview You write the code for Raiseevent ON click of the button.
Event Sending from par
EPCM.raiseEvent("urn:com.sap.tc.webdynpro.example.reponamespace","linkclickevent",variable);

Event Receving on Webdynpro
WDPortalEventing.subscribe("urn:com.sap.tc.webdynpro.example.reponamespace","linkclickevent",wdThis.wdGetEpcflistenAction());
public void onActionepcflisten(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent, java.lang.String dataObject )
 //@@begin onActionepcflisten(ServerEvent)
// wdContext.currentContextElement().setName(dataObject);
// wdComponentAPI.getMessageManager().reportSuccess("listen eventfired......");
 wdComponentAPI.getMessageManager().reportSuccess("dataobj is....."+dataObject);
 //@@end
(The variable dataObject cannot be changed to other name)
Regards
Geogi

Eventing in Portal page between Team Viewer and Custom Webdynpro for ABAP

We are trying to implement a new Portal page that contains a Team Viewer Iview and a custom Webdynpro for ABAP iview.
The idea is that the when a manager select one of his direct report in the Team Viewer, the custom Webdynpro for ABAP would pick up the selection_changed event and retrieve the data for the selected employee.
We followed the instruction provided by SAP in note 1112733 and it worked in our development environment. When we moved the iviews to our testing environment it stopped working.
I also used the Diagnostic Iviews provided by SAP and I get the same result: Works in Dev, does not work in QA or in Prod.
We also followed the troubleshooting steps of note 945516 and it still did not help us. We can not find a difference in our system set up.
We are therefore looking for pointers as to what could be our problem.
Thanks!
Edited by: Benoit Fortin on Feb 20, 2009 2:28 PM

Problem was solved internally:
The reasons the eventing worked in Dev and not in QA or Prod, was that we had a different level of patch for ESS/MSS between instances, which I was not aware of.
Dev was on ESS/MSS version 600 SP14 and QA and Prod was on a different level. Once we implemented ESS/MSS SP 14 accross the board, everything was good.
Edited by: Benoit Fortin on Nov 13, 2009 11:57 AM

Colum Configuration in the Team Viewer iview

Similar Messages

Maybe you are looking for