\\Column 1 Validation Failure

Hello, haven't created a dimbuild file in a long time (have been working with HAL in Planning).
Can somebody give me some information about what \\Column 1 Validation Failure means?
I am working in 9.3.1 and the dimbuild rule validates, but when I try to load the file the only thing that shows in the error file is \\Column 1 Validation Failure?
Any help on what it means would be great.
Thanks in advance.

Disregard, when I marked the first row as a header row the error went away.

Similar Messages

During an update of the applications on the BlackBerry smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatis

I have reset both my torch and playbook back to original only thing that I kept was my contact. And still problems I am a few min away from leave my loved blackberry and going android !! Or heaven help us Phone
Issues 1) playbook wont connect to desktop manager anymore
2) Play book has 2 calendar icons with two different settings on them ??? I have one that is currently working with my yahoo email and calendar account.
3) my Phone when connected to desk top software shows the calendar as read only
4) Unable to update my phone says During an update of the applications on the BlackBerry® smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatisfactory dependencies."
I just want my email and Calendars to work I am tried of spending nights trying to get these deices working !!!
someone please help me. !!
I know you are going to ask I have updated everything last time and it is all as update as it can get.
As for now as I wait I am going to wipe my phone again and just set everything up again !! If I have to even my contacts AHHHH Help I am starting to think crazy thoughts

Did you try to eboot the your PC or laptop where your device is connected ?
I experienced this with my windows laptop, after a failed to do an update, I restart the laptop and my Torch, then retried, and it's worked

Column Validation on Single Line of Text

I have a sharepoint input form in SP2013, which contains text field with below properties
1. Type: Single line of Text
2. Under Column validation
=AND(ISNUMBER([Column name]+0),ISERROR(FIND(".",[Column name],1)))
On form submit, the above condition evaluates and throws an error if field value is non numeric field.(This is expected and working fine)
I also want to add another condition that should not allow preceding zero
example: it should throw error on 0122343(any number starting with zero)

You should achieve that with the following formula :
=AND(AND(ISNUMBER([Column name]+0);ISERROR(FIND(".",[Column name],1)));LEFT([Column name],1) <> "0")
If the first character of your column is 0 it fails validation
Regards

Trying to understand a WS-I validation failure

I'm trying to understand the following WS-I validation failure message. I'm sure I'm making a basic mistake but I can't find an example of the use case where an xsd is imported. Can someone point out my error?
Thanks,
Bret
Validation failure:
Result failed:
Failure Message: A QName reference that is referring to a schema component, uses a namespace not defined in the targetNamespace attribute on the xs:schema element, or in the namespace attribute on an xs:import element within the xs:schema element.Failure Detail Message:
{http://Messages.xsd}SigReplyMessage,
{http://schemas.xmlsoap.org/wsdl/}string,
{http://Messages.xsd}SigRequestMessage
Element Location: lineNumber=8
My wsdl looks like this:
<definitions targetNamespace="urn:S3SignatureGenerator"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="urn:S3SignatureGenerator"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:messages="http://Messages.xsd">
<types>
<xsd:schema>
<xsd:import id="Messages.xsd"
schemaLocation="../../XSDDocument/Messages.xsd"
namespace="http://Messages.xsd"/>
</xsd:schema>
</types>
<message name="ReturnSignature">
<part name="SigAndExp" type="messages:SigReplyMessage"/>
</message>
<message name="RequestSignature">
<part name="Keys" type="messages:SigRequestMessage"/>
</message>
<portType name="SigGenerator">
<operation name="GetSignature">
<input message="tns:RequestSignature"/>
<output message="tns:ReturnSignature"/>
<fault name="sigFault" message="tns:SigFault"/>
</operation>
</portType>
<message name="SigFault">
<part name="faultMessage" element="string"/>
</message>
<binding name="SigGenSoapHttp" type="tns:SigGenerator">
<soap:binding style="document"
transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="GetSignature">
<soap:operation soapAction="urn:S3SignatureGenerator/GetSignature"/>
<input>
<soap:body use="literal" parts="SecretKey PublicKey"/>
</input>
<output>
<soap:body use="literal" parts="Signature"/>
</output>
<fault name="sigFault">
<soap:body use="literal" parts="SecretKey PublicKey"/>
</fault>
</operation>
</binding>
<service name="SignatureGenerationService">
<port name="SigGenSoapHttpPort" binding="tns:SigGenSoapHttp">
<soap:address location="tbd"/>
</port>
</service>
</definitions>
Messages.xsd looks like this:
<?xml version="1.0" encoding="windows-1252" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.bret.org/S3test/Messages"
targetNamespace="http://www.bret.org/S3test/Messages"
elementFormDefault="qualified">
<xsd:complexType name="sigRequestMessage">
<xsd:sequence>
<xsd:element name="publicKey" type="xsd:string"/>
<xsd:element name="privateKey" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="sigReplyMessage">
<xsd:sequence>
<xsd:element name="Signature" type="xsd:string"/>
<xsd:element name="expiration" type="xsd:dateTime"/>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>

Hi Bret,
Sorry it's taken me a bit of time to respond, but please find below a run-down of the WS-I related problems I spotted in your WSDL document. The first few are related to the import error you saw, and there's a few others that I'll also discuss. Apologies in advance if you've already spotted and corrected those.
I'll use line numbering based on the formatting of the WSDL and XSD that you supplied.
BP2417 (the one you asked about)
The line number in the error is a red herring. There are two problems here:
- WSDL document, line 29: You're using the XSD type string unqualified - it should be xsd:string.
- WSDL document, lines 8 and 13; schema, lines 3 and 4: The namespaces you're using don't match. Either change the namespaces in the schema to be http://Messages.xsd, or change the namespaces in the WSDL to http://www.bret.org/S3test/Messages.
BP2202
You should declare UTF-8 or UTF-16 encoding when creating WSDL or schema documents. The easiest way to do this is to go to Tools|Preferences, and set JDeveloper's default encoding to either UTF-8 or UTF-16.
BP2032
WSDL document, line 26 and 43: The name attribute of the fault should read SigFault, not sigFault, as WSDL is case-sensitive.
WSDL document, line 44: You should use a soap:fault element, not a soap:body element, to bind a fault, thus:
<soap:fault name="SigFault" use="literal"/>
BP2012
WSDL document, lines 17 and 20: Message parts in a document-bound service like this one should reference XSD elements and not complexTypes. What you need to do is define two elements in your messages schema whose types are SigReplyMessage and SigRequestMessage respectively, and then reference those elements from the WSDL.
WSDL document, line 38: The value of the parts attribute should be Keys to match the name of the part child of the RequestSignature.
WSDL document, line 41: The value of the parts attribute should be SigAndExp to match the name of the part child of the ReturnSignature.
WSDL document, line 44: The value of the parts attribute should be faultMessage to match the name of the part child of the SigFault.
BP2115
WSDL document, lines 17 and 20: The names of the elements should be sigReplyMessage and sigRequestMessage and not SigReplyMessage and SigRequestMessage, again because WSDL is case-sensitive.
WSDL document, line 30: The element attribute of the part references xsd:string, which is not an element but a complexType. You'll need to add an element declaration to your schema, which is of type xsd:string.
I've included corrected versions of your WSDL and schema below, I hope this helps. I also note you've posted a few other messages related to WS-I and WSDL, I hope I've managed to cover those in this message too.
Regards,
Alan.
WSDL:
<?xml version="1.0" encoding="UTF-8" ?>
<definitions targetNamespace="urn:S3SignatureGenerator"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="urn:S3SignatureGenerator"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:messages="http://Messages.xsd">
<types>
<xsd:schema>
<xsd:import id="Messages.xsd"
schemaLocation="Messages.xsd"
namespace="http://Messages.xsd"/>
</xsd:schema>
</types>
<message name="ReturnSignature">
<part name="SigAndExp" element="messages:sigReplyMessage"/>
</message>
<message name="RequestSignature">
<part name="Keys" element="messages:sigRequestMessage"/>
</message>
<message name="SigFault">
<part name="faultMessage" element="messages:faultMessage"/>
</message>
<portType name="SigGenerator">
<operation name="GetSignature">
<input message="tns:RequestSignature"/>
<output message="tns:ReturnSignature"/>
<fault name="SigFault" message="tns:SigFault"/>
</operation>
</portType>
<binding name="SigGenSoapHttp" type="tns:SigGenerator">
<soap:binding style="document"
transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="GetSignature">
<soap:operation soapAction="urn:S3SignatureGenerator/GetSignature"/>
<input>
<soap:body use="literal" parts="Keys"/>
</input>
<output>
<soap:body use="literal" parts="SigAndExp"/>
</output>
<fault name="SigFault">
<soap:fault name="SigFault" use="literal"/>
</fault>
</operation>
</binding>
<service name="SignatureGenerationService">
<port name="SigGenSoapHttpPort" binding="tns:SigGenSoapHttp">
<soap:address location="tbd"/>
</port>
</service>
</definitions>
Schema:
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://Messages.xsd"
targetNamespace="http://Messages.xsd"
elementFormDefault="qualified">
<xsd:element name="sigRequestMessage">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="publicKey" type="xsd:string"/>
<xsd:element name="privateKey" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="sigReplyMessage">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Signature" type="xsd:string"/>
<xsd:element name="expiration" type="xsd:dateTime"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="faultMessage" type="xsd:string"/>
</xsd:schema>

ORA-29024: Certificate validation failure when trying to redirect to https

Hi, I was trying to redirect the page to another https website using utl_http.request,
I configured Oracle wallet and import the certificate, and successfully to get the webpage content in sqlplus by
select utl_http.request('https://<website>,null,<wallet>,<wallet password>) from dual,
but when I trying to use the same way in a button process of Apex, the error ORA-29024: Certificate validation failure prompt.
Anyone know what wrong with it?
Thanks
Vincent Pek

Hi, Sorry, I found that after i reboot my laptop , it's working now.

Column validation for JTable?

Hi all,
i have a table on my app, there is a column that show boolean value on the table. it's represented by check box, cause i'm using a custom table model. the datas is took from database.
i want to create a column validation to validate at least only 1 cell must checked, if there's only a checkbox that checked and when we try to uncheck the last one it will show us a warning. how to make it possible?
anyone can help me?
ps:
i'm using jdk1.6.0_04

You will probably need to create a custom editor.
This code shows how to create one using a text field. The code will be similiar for a check box:
http://forum.java.sun.com/thread.jspa?forumID=57&threadID=642364
You will need access to the JTable or TableModel and would need to look at the values in every row for the specific column before determining whether to stop editing or not.

Adobe Genuine Software Validation Failure

Can't download Adobe Application Manager. Keep getting "Adobe Genuine Software Validation Failure: The product you are trying to install is not an Adobe Genuine Software and appears to be counterfeit." What do I do? I've tried several times and I keep getting the same thing.

Check this link, it may help :-
http://helpx.adobe.com/x-productkb/global/digital-certificate-revoked-aam.html

Call a Javascritp function after a validation failure

Hi all,
I have a javascript function that is executed on page load. (it works fine)
Now I need to call it after a validation failure
How I can implement this call ?
I am using Apex 4.0.2 and the inline notification, so the page load event is not fired
which "activation" event can i use ?
regards
saverio
Edited by: tirone on 17-giu-2011 9.00
Edited by: tirone on 17-giu-2011 9.04

Thank You Tyson for your quick replay,
and .. I apologize me for mine bad English.
My problem is that after a validation failure (with in line notification) the page load event IS NOT fired (in some case): so my script is not executed.
I would like to execute this script however and I don't know where and how to call it.
I give You more detail ......
I'm working on a page that contain a tabular form; in this form, using my script (called "disable_field"), Ii set to read-only some fields.
I call my script in "Execute when page load" section of page definition.
If the validation failure is produced by an update of some records in my tabular form all is OK : the inline notification is shown, the page is re-loaded and my script is executed.
If I add a new record and, after the submit, a validation fail, the page IS NOT reloaded (I don't know the why) and my script is not executed (so all fields are modifiable and this is not how much I want)
I will appreciate very any help
regards
saverio

Form Validation Failure

Hi,
When trying to use PPR on radio buttons to make a field mandatory.
when I am deselecting to change criteria I am facing Form Validation Failure error.
why this error will come.
Krishna

Hi Anil,
Thanks for the reply
after setting
Disable Client Side Validation and Disable Server Side Validation Property to "True"
the issue is resolved.
Krishna

Column Validation on Yes/No Ceheckbox

As there is no column validation on a Yes/No column within the column itself, I'm wondering if it's possible at the List level to create column validation on 4 Yes/No columns.
Something like this: allow Checkbox A to be set to Yes if and only if Checkboxes B, C and D are ALL equal to Yes.
=IF(AND([Checkbox B]=TRUE,[Checkbox C]=TRUE,[Checkbox D]=TRUE)),[Checkbox A]=TRUE,FALSE)
Just not exactly sure about the syntax or whether what I'm attempting is even possible.
Thanks in advance for any assistance you might be able to offer.
Dave

Hi Dave,
You can use the following validation for your list.
=OR(AND(A=TRUE,AND(B=TRUE,C=TRUE,D=TRUE)),AND(A=FALSE,OR(B=TRUE,C=TRUE,D=TRUE)))
Thanks
Daniel Yang
TechNet Community Support

Disable Column validation in editform.aspx page

I want to temporarily disable column validation in editform of custom list. For example i have column 'age' with column validation =[age]>18 , but I want to allow user to enter any value only in editform.aspx .
Thanks, Saravanan PRS

Option #1. You may remove those validations from list settings
temporarily.
Option #2. Remove list setting validations and apply all validations through javascript or jquery. You
can have a flag to disable or enable. This way you get a flexibility to ON/OFF validations.
Bala

Retain all form field values after input text field validation failure

Hi,
I have a form with 1 input text field, one Command button and one h:selectManyListbox. when User enteres some values in input field and clicks on command button named Add, the value is validated. If input is invalid, then an error message appears next to the field. If input is valid, then the value is added into h:selectManyListbox. Adding to list box is done using Ajax4Jsf.
Probelm:
Let's assume user entered 3 valid values one after another and all are added into the list box. When he enters a wrong value, and error message appears. however, the entered values in list box goes away. Is there a way to retain the values even after validation failure.
Code is given below;
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<%@ taglib uri="http://myfaces.apache.org/tomahawk" prefix="t"%>
<%@ taglib uri="http://richfaces.org/rich" prefix="rich"%>
<%@ taglib uri="http://richfaces.org/a4j" prefix="a4j"%>
<h:panelGroup>
     <h:outputLabel for="inputEmailId1" value="Email Id: " />
     <t:inputText value="#{bean.newEmailId}" id="inputEmailId1" maxlength="100" size="40" immediate="true">
          <t:validateEmail message="Enter a valid Email Id." />
     </t:inputText>
     <t:message for="inputEmailId1" styleClass="errorStyleClass" />
</h:panelGroup>
<t:panelGroup style="text-align: left;" >
     <a4j:commandButton value="Add" styleClass="buttonsSub" action="#{bean.addSharedEmails}"
          reRender="inputEmailId1, selectedSharedEmails" />
</t:panelGroup>
<t:panelGroup style="text-align: left;">
     <h:selectManyListbox id="selectedSharedEmails" size="8" style="width:100%;" immediate="true">
          <f:selectItems value="#{bean.sharedEmails}" />
     </h:selectManyListbox>
</t:panelGroup>
Thanks in advance,

Use the attribute "binding" instead of a "value". This will remember the value. You can also make sure that you dont have anything in your constructor or class level that initialises that value to "" or null. Because if JSF is remembering your value but your initialization that gets triggered before the page loading resets it to default values then you need to change that part of the code.

Cannot a file to document library with column validation

I have two problems
Problem#1: I can not create a file from C# code, If document library has a text column with Sharepoint column validation.
SharePoint throws exception if I invoke SPFileCollection.Add method.
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx) at Microsoft.SharePoint.Library.SPRequest.PutFile(String bstrUrl, String bstrWebRelativeUrl, Object punkFile, Int32 cbFile, Object punkFFM, PutFileOpt PutFileOpt, String
bstrCreatedBy, String bstrModifiedBy, Int32 iCreatedByID, Int32 iModifiedByID, Object varTimeCreated, Object varTimeLastModified, Object varProperties, String bstrCheckinComment, Byte partitionToCheck, Int64 fragmentIdToCheck, String bstrCsvPartitionsToDelete,
String bstrLockIdMatch, String bstEtagToMatch, Int32 lockType, String lockId, Int32 minutes, Int32 fRefreshLock, Int32 bValidateReqFields, Guid gNewDocId, UInt32& pdwVirusCheckStatus, String& pVirusCheckMessage, String& pEtagReturn, Byte& piLevel,
Int32& pbIgnoredReqProps) at Microsoft.SharePoint.SPFileCollection.AddStreamOrBytesInternal(String urlOfFile, Stream file, PutFileOpt fileOpt, String createdBy, String modifiedBy, Int32 createdByID, Int32 modifiedByID, DateTime timeCreated, DateTime timeLastModified,
Object varProperties, String checkInComment, Stream formatMetadata, String lockIdMatch, String etagToMatch, SPLockType lockType, String lockId, TimeSpan lockTimeout, Boolean validateRequiredFields, SPVirusCheckStatus& virusCheckStatus, String& virusCheckMessage,
String& etagNew, Boolean& ignoredRequiredProps) at Microsoft.SharePoint.SPFileCollection.Add(String urlOfFile, Byte[] file, SPFileCollectionAddParameters parameters)
If I remove column validation, I don't get that error.
It would appear that the error is thrown internally in Sharepoint's Add API.
Not quite sure how to proceed now.
Problem#2: Even if I input a valid value in the column validation, the same error above is still thrown.
Confused................
[Update] Okay, I have found the reason for the exception (correct if I am wrong). Sharepoint File has metadata, and when I do the Add function, Sharepoint internally does a validation on the metadata and it will throw exception if not validated. That's why
validation would fail even when I am inputting some valid data in my field (because I am not sending that valid data to the Add function through metadata properties).So, my question now is:
Is it possible to prevent the validation on the metadata properties? Is there some APi for it?

I was probably not clear in my thread.
What I would want is for my code to upload the file to the server and then allow me to input my values for the metadata, THEN do the validation. Similar to how you upload a document to sharepoint library using the out-of-the-box webparts.
But, right now in my code, this is not possible. Uploading the file using the Add API will just throw an error BEFORE even allowing me to input any values for my item/file metadata. So, I am trying to find a way to upload my file without the validation (pretty
much like how microsoft does it in oob)
Not sure if this is clear enough now

How to get the handle of the Validation Failure Message Popups.

Hi,
I'm using Jdev 11.1.2.0
I have added validation rule(less than system date) and failuremessage("date should not after currentdate") on the date field in EO.
when I enter greated than the sysdate in date field in page, I'm getting validation failure message in a popup with ok button. its working good.
but when i click on the popup ok button, the focus should go the date field again and it is higlighted.
So, how to get the handle of the popup's ok buton? and how to highlight the datefield after clicking the popup's ok button?
Any suggestion would be appreciated.
thank you.

if i understood correclty means,
i hope that, error popup is provided by framework.. how could be possible? to catch the error popup ok button.
am not well aware of catching the error popup which is provide by framework..
but i had answer for your part of the question,
if the condition go off false means you force the cursor into date field. this is can be done using 'javascript'. unless using script you can't do that. ADF doesnt provide any force focusing feature.
please google how to focus the field.
https://blogs.oracle.com/jdevotnharvest/entry/how_to_programmatically_set_focus
http://technology.amis.nl/2008/01/04/adf-11g-rich-faces-focus-on-field-after-button-press-or-ppr-including-javascript-in-ppr-response-and-clientlisteners-client-side-programming-in-adf-faces-rich-client-components-part-2/
http://lspatil25.blogspot.in/2012/04/adf-default-cursorfocus-to-input-field.html
http://donatas.nicequestion.com/2012/04/component-to-set-initial-focus-in-adf.html

"Adobe Genuine Software Validation Failure" error?

I just purchased InDesign and am trying to download it, but get this crazy error msg...
"Adobe genuine software validation failure. The product you are trying to install is not an Adobe Genuine software and it appears to be counterfeit."
And it doesn't give me any more options.
Can you please let me know what to do? How can a product from its own site be "counterfeit"?

Warning: "Adobe Genuine Software Validation Failure..." | Windows

\\Column 1 Validation Failure

Similar Messages

Maybe you are looking for