Column Chart with Multiple axes
Hi folks
I am using flex 2 charts for displaying data. I want to show my data using column chart with secondary axis. However columns for multiple series are coming one over another. here is the code I have attached:-
But I want to put columns side by side. Any thoughts will be appreciated.
Warm Regards
Rush-me
Any thoughts?
Warm Regards
Rush-me
Similar Messages
-
Drill Down between 2 stacked column chart with multiple rows.
Hi,
Can anyone please help me.
1) i have to create stacked column chart with Region and cout of calls for previous 3 quarters.
2) the 2nd stacked column should display the priority with the count of calls for the respective selection of region on the 1st chart..
to achieve this,
i'm using 2 stacked column charts and 1 lebel baseb menu.
from this i can able to get the drill down from label based menu to 2nd stacked column chart but i couldn't able to done the same from 1st stacked coumn chart.
Becoz my data is multiple row for each quarter.
please suggest me to achieve the drill down between 2 stacked column charts.
assume that my data like below.:
coulmns for 1st stacked column chart : Region, Q2,Q3 &Q4
Region Q2 Q3 Q4
Other 3658 3497 497
NA - North
America 3 3 1101
APJK 1 4 597
UK 324
EMEA North 1 1 288
CORPORATE 1 5 215
LA -
Latin America1 2 208
EMEA 1 199
EMEA South 1 1 169
Coulmns for 2nd coumn chart: Region, Priority, Q2,Q3,Q4 ()which is derived from 1st table.
Region Priority Q2 Q3 Q4
Other D: End of Next Day 1568 1613 239
Other C: End of Day 983 893 119
Other A: 2 Hour 631 610 70
Other B: 4 Hour 396 318 56
NA -
North AmericaD: End of Next Day 2 2 514
APJK D: End of Next Day 3 297
NA -
North AmericaC: End of Day 284
NA -
North AmericaA: 2 Hour 1 170
UK D: End of Next Day 157
APJK C: End of Day 1 1 152
Other E: 3 - 5 Business Days 68 58 13
EMEA North D: End of Next Day 1 136
CORPORATE D: End of Next Day 4 107
NA - North America B: 4 Hour 1 104
LA - Latin America D: End of Next Day 1 1 86
EMEA D: End of Next Day 86
UK C: End of Day 85
APJK A: 2 Hour 79
EMEA South D: End of Next Day 72
EMEA North A: 2 Hour 69
EMEA North C: End of Day 56
APJK B: 4 Hour 55
EMEA C: End of Day 1 53
LA - Latin America C: End of Day 54
UK A: 2 Hour 49
EMEA South C: End of Day 1 44
CORPORATE A: 2 Hour 1 43
CORPORATE C: End of Day 44
LA - Latin America A: 2 Hour 1 42
EMEA South A: 2 Hour 1 32
EMEA B: 4 Hour 30
UK B: 4 Hour 30
EMEA A: 2 Hour 27
EMEA North B: 4 Hour 1 26
NA -
North AmericaE: 3 - 5 Business Days 25
LA - Latin America B: 4 Hour 23
EMEA South B: 4 Hour 20
CORPORATE B: 4 Hour 17
APJK E: 3 - 5 Business Days 13
Other F: 6 - 10 Business Days 6 4
Other G: 11 - 20 Business Days 6 1Hi Srinivas,
I'm using label based menu "filterd rows" only but i couldn't bind the drill down with the 1st stacked column chart.
for mor details:
1) i'm having 2 stacked coumn charts & 1 lebel based menu but eventhough i couldn't able to achieve.
if i select the lebel based values then the 2nd stacked column charts is giving detailed valus but if i keep my mouse on the 1st stacked column chart the there is no changes on the 2nd chart..
somewhere i'm mising the binding data between 1st stacked coumn chart & lebel based menu on drill down part.
Becoz i'm having multiple rows. so can you please try your and send me the xlf file using your concept. -
Help Creating Dynamic Stacked Column Chart with Multiple Criteria
Hi all. Im new here and hoping you can help. I have a dashboard Im trying to rebuild from scratch (our computer had a meltdown and we lost all our files). I did not build the dashboard initially so Im trying to recreate it from the flash file we were able to recover. I have come across a chart that I just cannot figure out how to do. I can figure out how to write an array in the Excel sheet that pulls the data into a table the way I need it to be but found out after I wrote that that Xcelcius doesn't support arrays so all my data disappears when I go into preview mode (which is especially frustrating since I can see the chart working fine in design mode). Anyway this is what the data table looks like
Month Year Company Positive # Negative # Neutral # Positive % Negative % Neutral %
October 2011 CompanyA 1234 1234 1234 10 10 10
October 2011 CompanyB 1234 1234 1234 10 10 10
October 2011 CompanyC 1234 1234 1234 10 10 10
October 2011 CompanyD 1234 1234 1234 10 10 10
November 2011 CompanyA 1234 1234 1234 10 10 10
November 2011 CompanyB 1234 1234 1234 10 10 10
November 2011 CompanyC 1234 1234 1234 10 10 10
November 2011 CompanyD 1234 1234 1234 10 10 10
December 2011 CompanyA 1234 1234 1234 10 10 10
December 2011 CompanyB 1234 1234 1234 10 10 10
December 2011 CompanyC 1234 1234 1234 10 10 10
December 2011 CompanyD 1234 1234 1234 10 10 10
The original chart was built so that you would choose the month from a combo box and then the company names would show up along the X axis with their % amounts shown in the stacked column. I know how to make a combo box work and I know how to make a stacked column chart work with static data. I cannot for the life of me figure out how to get it to work so that when you choose the month from the combo box it filters the data. I've tried filtered rows but I'm just missing some information that makes it work and I can't figure out what that information is. It has to be able to get the month/year combo from the combo box and then go to the table, filter it by month and year and then create a multi-row table of data with just the company and the percent values. Any help would be greatly appreciated!Which connection you are using?
IF quite difficult if you are working under static data. -
Property node for a chart with multiple axes
I have created a chart with two y axes, one for each of two data sets
that I am plotting. From the front panel, I can view the properties of
the chart and adjust the scales of the two axes separately under the
Scales tab. I need to, though, adjust the maximum and minimum of these
axes programmatically. How can I create a property node that refers to
one of the two y axes, and how can I specify which axis the node is
referring to? If create a generic YScale:Minimum property node, I get
an error.
Thanks for the help,
TJR"...YScale:Minimum property node, I get an error."
That is curious.
You can specify the active scale for which the property will be applied.
The attached demo (in LV 7.1) illustrates how to do this by fist setting the index of the active scale and then updating its property (property nodes execute from top to bottom).
What error do you get?
Ben
Message Edited by Ben on 11-30-2005 08:07 PM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
Set Active Scale.vi 27 KB
Set Active Scale.JPG 18 KB -
Creating SVG Chart with multiple lines
Hi All,
I want to create a chart with multiple lines.
Ex: I have one emp table with empno, sal and deptno columns.
I want to print deptno in x axis and no of employees on y axis.
I want to print one line for employees with sal > 15000 and one more line for employee with sal =< 15000
So one line will show no of employees with sal more than 15000 for each dept. Similar case for the other line and these 2 lines should be in different colors.
For one line the query will go as
select link, deptno, count(empno)
from emp where sal > 15000 group by null, deptno
Is this possible to draw this chart?
Thanks,
ManojI wasn't able to do something like what you describe, but I was able to do this:
I defined column A of the table as a Header Row, selected the cells in the table, and chose this chart type (2D 2 Axis):
Then I clicked the chart and in the pane at the right checked 'Axis Name' in the Axis tab and added the axis names.
Maybe this can give you an idea of how you can illustrate the relationships that you want to show.
SG -
Is it currently possible to create a doughnut chart with multiple concentric circles in SSRS?
Is there currently any way to create a 'doughnut' chart with multiple concentric circles in an SSRS report (any version), without using 3rd party tools?
Something like this, perhaps?
(For that matter is it possible to create this using JavaScript? It's my understanding that this image was originally created in a web app using JavaScript. So far I've not been able to pin down the details. I've found hints that JavaScript
can be used in SSRS reports but so far no clear working examples.)Hi B.Chernick,
According to your description, you want to create a create a doughnut chart with multiple concentric circles in your report. Right?
In Reporting Services, we only have doughnut chart with one concentric circle. All the category group is in that concentric circle. Though we can embed javascript injection in expression, it only give the css style to values or report
items which can change the looking. It can't change the structure of the report items itself. So your requirement can't be achieved current.
For your requirement, we suggest you provide Microsoft a feature request at
https://connect.microsoft.com/SQLServer
so that we may try to expand the product features based on your needs.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
Column chart with null data items
I have a Column Chart with an ArrayCollection data provider.
The data will sometimes have missing items in some "rows'. For
example, it might look like this where the second object has no
"Male" property:
public var myData:ArrayCollection = new ArrayCollection([
{School: "Priorford", All: 95, Male: 92, Female: 98},
{School: "Giffnock", All: 87, Female: 89},
{School: "Hastings", All: 80, Male: 78, Female: 82}
Sometimes I get the following error:
TypeError: Error #1009: Cannot access a property or method of
a null object
reference.
at mx.charts.chartClasses::NumericAxis/mapCache()
I'm assuming the error is because of missing data items, but
I'm not 100% sure. Some data sets with missing items will display
with no error. I can't see a pattern to those that don't.
-- I can't produce the error when using a "static" data
source set in the Flex app itself (such as the example above).
These always display correctly, even with missing items.
-- In the problem case, the source data comes from a MySQL
database through a PHP script that is called with a Flex
httpService. The returned data is parsed in Flex, and put into the
ArrayCollection. I was suspecting that the returned data was flawed
in some way, but the same ArrayCollection displays correctly in a
DataGrid. The problem is only with the Chart.
-- I can work round the problem by adding the missing
properties and setting them to an empty value. But I don't think I
should have to do this.
Has anyone seen this problem, or know of any obvious thing I
might be doing wrong.Thanks Arthur.
Your first suggestion is effectively what I'm doing as a
workaround. But it is a bit of a pain to have to account for this
each time when displaying a chart. It's a particular problem when
you don't know in advance what "categories" might be returned by
the data and that have to be charted.
My biggest concern is that this looks like a bug, and the
fact that it seems to occur intermittently is a bit worrying. (I
also know that eight out of ten reported "bugs" are user error,
which is why I was wondering if anyone else had experienced this.)
About your second suggestion, I think the interpolateValues
property only applies to lineSeries. -
Stacked Column Chart with Lines
Requirement:
User stacked Column chart to display data for defects for 4 departments.
1 or 2 lines to show baseline for defects(constant).
Is there anyway that I can do that just like we can create one in Excel?
(stack a Stacked column chart with a line chart is not a solution.)
Any advises?
Thanks,
WenHi Wen,
I realise that you are not going to get this to work with a standard component on its own. I think it might be possible to acheive it with overlaying barcharts and combination charts.
My assumption is that you are looking for something that has a stack with 3 separate items in it. Two target lines crossing over the stacked chart.
I will have a look at this to see if I can come up with something. Let me know if this is not your requirement.
No, I don't work for SAP. I think those that do have the SAP logo beside them.
Regards
Alan -
Buffered high-speed capture with multiple axes
Has anyone succeeded in using buffered high-speed capture (on 7350 boards) with multiple axes?
The capture works really well for me on a single axis, but when I try to use it on 2 axes simultaneously it behaves very strangely. There seems to be some kind of unwanted interaction between the two buffers which means data points are lost and they often stop updating altogether.
A very similar question was posted here over a year ago (http://forums.ni.com/ni/board/message?board.id=240&thread.id=4087), which includes a more detailed explanation and an example VI. Can anyone help? I'm using LabVIEW 8.5 RT with NI-Motion 7.6 and a 7358 board.
Thank you,
IanHi Ian
I have been asked working with kostas on this problem for you and just wanted to give you an update as I know its been a while and is an important issue for you. I have been chasing up our specialists in the field and resently had responses of the kind:
"Hi Graham
The issue was found out to be a bug in our motion driver. The issue is being examined by motion R&D right now. I do not know a time frame on when this will be fixed as it is proving to be a tricky problem. I am copying Stuart and Lorne on this since they have been working on it as well.
Thanks,"
Be assured that I am chasing it as closely as I can. From your end what is the situation, do you have a work arround that will suffice or are you still waiting on this.
Thanks for your understanding and I look forward to hearing from you with your current situation.
best regards
Graham Green
Technical Marketing Engineer
National instruments UK & Ireland -
Column Chart with Columns That Vary in Width
The subject is Column Chart with Columns That Vary in Width.
I have been concentrating on the column renderer. Unfortunately,
the renderer class receives control with access to limited
information. Mainly, what it gets is pixel counts that measure the
dimensions of the rectangle that ends up being a column. There is
no straightforward way to send width information to the renderer. I
can, however, change the color of the column. I thought of encoding
the width in the height, but that distorts the actual height,
potentially causing the chart scale to be computed incorrectly.
Also, the encoding is hard to reverse once the height in
transformed by an unknown and varying scale factor so that the
column fits on the chart. I love the way the column chart looks. I
only want to alter the width of each individual column. Since I am
drawing each column, if I knew the widths, I'd be done by now. Do
you have a better approach? Thanks in advance.You need three ColumnSeries. Set the dataProvider of each directly (instead of setting it for the ColumnChart) to something like this:
var cars:ListCollectionView = new ListCollectionView();
cars.list = inventory;
cars.filterFunction = function(item:Object):Boolean {
return item['category' /* or whatever your category field is */] == 'cars';
Do something similar for bikes and trucks. You can do something like this if you don't know the number of categories as well, but it's rather trickier (and left as an exercise for the reader). -
Line Chart with Multiple Series
Post Author: JayZee
CA Forum: Charts and Graphs
HI
I am trying to create a line chart with multiple series for trend analysis on CR XI but not having much luck, I thought it would be so simple to do!
My data is provided summarized on the server and is returned as 12 rows:
Month Year1 Year2 Year3 Year4 Year5January 100 80 75 90 120February 85 25 40 25 80etc for the rest of the months
My problem is that I can only get the chart to accept the values to display as a summary and not just as the data pulled back from the server. I have read an article on the support site for Crystal 6.0 but it doesn't seem to translate well into XI.
If necessary I could redesign the table to bring back un-summarized data but that is quite a big job.
Any help greatly appreciated.
JayPost Author: Tim Wise
CA Forum: Charts and Graphs
In the chart expert, put Month in the 'On change of' box and put each year in the 'Show values' box. This puts the month on the x-axis and plots each year as a line.
Is that what you want?
I did this in CR 2008 using your data in an Excel sheet. -
"Scatter" Chart with Multiple Values per Date
APEX Gurus,
I need to plot a chart with multiple y-axis values along the x-axis.
Here's an example:
X-Axis (Date) Y-Axis (Number)
1-JAN-07 1
1-JAN-07 2
1-JAN-07 3
2-JAN-07 1
2-JAN-07 2
3-JAN-07 1
Right now, APEX displays the X-axis (Date) as separate values on the x-axis. But I want all three 1-JAN-07 values to line up vertically under x-axis. I am currently using a line chart for this. And it displays a "dot" for each value (depending on my max rows value).
Any insight would be much appreciated! And thanks in advance!
SusanYou can try using this charting tool for generating scatter charts:
http://htmldb.oracle.com/pls/otn/f?p=31517:58
Denes Kubicek -
How do you combine a stacked column chart with a clustered column chart
Hello,
I am trying to combine a stacked column chart with a clustered column chart. I know that in Excel there is a way to trick that described on the next site: http://people.stfx.ca/bliengme/ExcelTips/Columns.htm
Is that possible with BI Publisher?
Thank you very much!
Codruta CrisanFinally I get it myself:
You need to use graph type as BAR_VERT_STACK2Y and the declare the series that you want to see on the first Y vertical bar as assignedToY2="false" and the ones that you wanr to see on the second Y vertical bar as assignedToY2="true".
In my case I use 4 Series, 2 stack on the first clustured column and 2 stacked on the second (2Y) clustured colum....see below
graphType="BAR_VERT_STACK2Y">
<SeriesItems>
<Series id="0" assignedToY2="false" color="#BBD6E7"/>
<Series id="1" assignedToY2="false"/>
<Series id="2" assignedToY2="true" color="#004A96"/>
<Series id="3" assignedToY2="true"/>
</SeriesItems> -
Reg : Concatenation of a column value with multiple rows... URGENT
Hello,
Could any of u help me in concatenating a column value with
multiple rows ???
For ex : I've the following data from emp table :
DEPTNO ENAME
10 KING'S
30 BLAKE
10 CLARK
10 TOM JONES
30 ALLEN
30 JAMES
20 SMITH
20 SCOTT
20 MILLER
10 MILLER
20 rajeev
I want the following output :
deptno Concat_value
10 KING'S,CLARK,TOM JONES,MILLER
20 Rajeev,MILLER,SMITH,SCOTT
30 BLAKE,ALLEN,JAMES
Thanks in Advance,
SriniHello Naveen,
Thanks for ur answer. But I need a single SQL query for getting
what I want. I know the solution in PL/SQL.
Please try it in a single SQL....
Thanks again,
Srini -
Flash line chart with multiple lines
Here a newbie with apex...
Created a flash line chart with as source the following sql statement:
select null link, year, sum(total_cost) from cost
group by year
a chart has been created with a single line. i wanted every year on an own line.
The way i could do this is with multiple series like:
select null link, year, sum(total_cost) from cost
where year =2008
select null link, year, sum(total_cost) from cost
where year =2009
But this not a good solition, cause now i've to add every year a new serie
hope to get some help from here... txn in advanced.tnx for your reply...
I will explain myself more by a picture of the wanted result, see below:
[Click here for the example image|http://img44.imageshack.us/img44/3444/grapha.jpg]
In your reply you wright you think i can create the graph with pl/sql process. After seeing my example you still think that's needed?
Hope you or some else can help... tnx in advanced.
greetings
Maybe you are looking for
-
HELP NEEDED IN FORMING A QUERY...URGENT.....
Hi, I have a table where in that an employee has multiple rows, in that i need to query a particular column values, and need to display in one column separated any special charactar like ":". I need this query. ex: EmpID in_time 1900 9:00:00 1900 9:4
-
Excel to node in NWDS 7.0.14
Hi Friends I am doing one application which takes data from Excel and send to node in WDJava(It was working on Local Project).It was not working on DC's.I searched SDN for this.I didnt catch the correct solution.Please give me step by step procedure.
-
How to validate a text item/display item in Oracle forms 9i?
Hello Everyone, I have a form in which we have to type in a product_id as shown below in the screenshot. And when we type in, it has to get validated. If it is valid then ok, else display a message saying not valid. How do we achieve it on a text box
-
Why does my photo linger on?
Hi group; I've been working on a documentary for about a year and am close to wrapping it up. I've encountered a really frustrating issue though. I have a lot of photos, most run thru Photoshop to size them appropriately and so forth. In the mai
-
Hi friends How to configure MRP run for sales orders. Thanks in Advance Rheya