Column name substitutions

I use column name substitutions e.g. #ENAME# in Report Row Template.If I have in Report definition easy select, everything works well. But if I use select with alias in Report definition and i use #ALIAS# in template so it doesn't work(it gives bad content of column).
select
ename as ALIAS,
from...
Can you help me.
Message was edited by:
user542927

Just curious. What happens if you do this:
SELECT ename_alias, empno_alias, dept_alias
FROM (SELECT ename ename_alias, empno empno_alias, dept dept_alias
FROM emp)?
Denes Kubicek

Similar Messages

Use variable in SQL for column name

Hi All,
We want to use a user input as a column name in APEX.
For e.g user will enter "ALLOWABLE_AMOUNT" then the query will be as follows :
select Rule,rule_name,rule_desc,"User Input" from rule_dim
where "User_input" > 100
So here the User_input will be substitued with Allowable_amount. Is this doable using any bind/substitution variables ? I tried ":P2_USER_VARIABLE" and "&P2_USER_VARIABLE." but did not work.
Please advice.

Hi Andy,
You do that with an Interactive Report and a Dynamic Action.
I'll assume that you're using APEX 4.2
Here's how:
Create Page 2 with an Interactive Report
Create New Page > Report > Interactive Report > Next > Next
Enter a SQL Select statement: select Rule,rule_name,rule_desc from rule_dim
Next > Create > Edit Page
Create the item P2_USER_VARIABLE
Add Item > Number Field > Next
Item Name: P2_USER_VARIABLE
Next > Next > Next
Source Used: Always, replacing any existing value in session state
Source Type: Static Assignment (value equals source attribute)
Create Item
Create a Dynamic Action to refresh the Interactive Report when P2_USER_VARIABLE is changed
Add Dynamic Action
Name: Refresh IRR
Next >
Event: Lose Focus
Selection Type: Item(s)
Item(s): P2_USER_VARIABLE
Next >
Action: Refresh
Next >
Selection Type: Region
Region: Report 1 (10)
Create Dynamic Action
Add the ALLOWABLE_AMOUNT to the Interactive Report
Report 1
Region Source: SELECT * FROM (select Rule,rule_name,rule_desc, :P2_USER_VARIABLE AS ALLOWABLE_AMOUNT from rule_dim) WHERE ALLOWABLE_AMOUNT > 100
Apply Changes > Apply Changes
Get the Interactive Report to submit P2_USER_VARIABLE
Report 1
Page Items to Submit: P2_USER_VARIABLE
Apply Changes
Change the Heading for ALLOWABLE_AMOUNT in the Interactive Report
Interactive Report
Change the Heading of ALLOWABLE_AMOUNT to &P2_USER_VARIABLE.
Apply Changes
Run
Enter something into the USER VARIABLE field and select something else on the page. Watch the last column update to that value.
Tim.

Result of an SQL query as a Column name of another query

Hi Friends,
Can we use a result of a SQL Query as a column name of another table to retrieve data. If so please help me.
For eg :
I have a table where is store numbers;
select col1 from table1 where col1='5';
and i have another table where .. this value of col is a column name..
select ( select col1 from table1 where col1='5') from table2;
Thanks in advance.

Hi,
ORAFLEX wrote:
Hi Friends,
Can we use a result of a SQL Query as a column name of another table to retrieve data. If so please help me.
For eg :
I have a table where is store numbers;
select col1 from table1 where col1='5';
and i have another table where .. this value of col is a column name..
select ( select col1 from table1 where col1='5') from table2;
Thanks in advance.Do you really mean that?
select col1 from table1 where col1='5';That query will always return either '5' or nothing. Whatever you're trying to accomplish with that, you can do with an EXISTS query.
Perhaps you meant to reference two different columns in that query:
select col1 from table1 where col2='5';In that case, sorry, no, you can't do that without resorting to dynamic SQL.
If the same column is used throughout the query (but could change every time you run the query), then the dynamic SQL might be pretty easy. In SQL*Plus, for example, you could use substitution variables, defined in another query at run-time.
If there are only a few possible values that the sub-query could possibly return, and you know what they all are, then you can fake a dynamic query like this:
SELECT     CASE     ( SELECT col1
            FROM       table1
            WHERE       col2     = '5'
          WHEN 'BONUS'     THEN bonus
          WHEN 'COMM'     THEN comm
          WHEN 'SAL'     THEN sal
     END     AS col1
FROM     table2
;Sorry to give such a vague answer, but it's the best I can do with the information I have.
It would help if you posted a little sample data (CREATE TABLE and INSERT statments for both tables), and the results you want to get from that data. If you want to pass a parameter to the query, give the results you want for a couple of different parameters.

Using select list value as column name in SQL

Folks,
Thanks in advance for any help with this
I have a select list with two values (Instance and Username) created by
STATIC2:Username;USERNAME,Instance;INSTANCE
I am trying to pass the value of this (:P2_SELECT) and use it as a column name in a SQL query as below
select USERNAME,
INSTANCE
from table_name
where :P2_SELECT like '%'||:P2_TEXTSEARCH||'%'
When I substitue the :P2_SELECT for one of the values (either instance or username) this works fine
I suspect it is due to how Application Express interprets the value of :P2_SELECT
Any help would be much appreciated!
Gareth

Thanks Munky that worked a treat!
The next hurdle I have now is that because I have changed the region type to "PL/SQL Function(returning SQL Query)" there is no longer the option to add sorting to the columns as I have had to change the Source option to "Use Generic Column Names (parse query at runtime only)"
I will have a scout around and see how I can get around this
Gareth

Dynamic column name with SELECT INTO

I am trying to build a function that derives a pay amount from a set of business rules. There are about 40 columns that hold various pay amounts and their column names are variations of 4 indicators (day shift, vs night shift, etc.) that I have to dynamically look up, ie here is the ID number and a timecard, now figure out which of the 40 fields to look up to get the pay amount.
I can determine from the timecard and employee ID which field to look at, but I'm getting hung up with the syntax needed to construct and execute the statement inside the PL/SQL block. I need to RETURN the pay I extract using the function, and I can create the correct SQL statement, but the EXECUTE IMMEDIATE won't accept the SELECT INTO syntax.
Can someone please suggest a solution? Here is the function:
create or replace FUNCTION FN_GET_PAYRATE(tc in NUMBER, e in NUMBER, pc in VARCHAR2)
RETURN NUMBER
IS
e_id NUMBER;
tc_id NUMBER;
pl_cd VARCHAR2(7);
shft VARCHAR2(2);
lvl VARCHAR2(2);
typ VARCHAR2(2);
e_typ VARCHAR2(4);
proj NUMBER;
hrly VARCHAR2(4);
payrt NUMBER;
var_col VARCHAR2(10);
sql_select VARCHAR2(200);
sql_from VARCHAR2(200);
sql_where VARCHAR2(200);
sql_and1 VARCHAR2(200);
sql_and2 VARCHAR2(200);
sql_and3 VARCHAR2(200);
sql_orderby VARCHAR2(200);
var_sql VARCHAR2(2000);
BEGIN
e_id := e;
tc_id := tc;
pl_cd := pc;
SELECT NVL(SHIFT,'D') INTO shft
FROM TS_TIMECARD_MAIN
WHERE TIMECARD_ID = tc_id;
--DBMS_OUTPUT.PUT_LINE('SHIFT= ' || shft);
SELECT NVL(PAY_LVL, 1), NVL(PAY_TYPE, 'B'), NVL(RTRIM(EMP_TYPE), 'LHD'), NVL(PROJECT, 001)
INTO lvl, typ, e_typ, proj
FROM TS_EMPLOYEES
WHERE EMP_ID = e_id;
--DBMS_OUTPUT.PUT_LINE('Level= ' || lvl);
--DBMS_OUTPUT.PUT_LINE('PAY_TYPE= ' || typ);
--DBMS_OUTPUT.PUT_LINE('EMP_TYPE= ' || e_typ);
--DBMS_OUTPUT.PUT_LINE('PROJECT= ' || proj);
IF e_typ <> 'LHD' THEN
hrly := 'H';
ELSE
hrly := '';
END IF;
IF proj <> 001 THEN
var_col := shft || lvl || typ || hrly;
--DBMS_OUTPUT.PUT_LINE('RATE COLUMN= ' || var_col);
sql_select := 'SELECT NVL(' || var_col || ', .01) INTO payrt';
sql_from := ' FROM TS_PAYRATES';
sql_where := ' WHERE PROJECT_ID = ' || proj;
sql_and1 := ' AND ACTIVE = 1';
sql_and2 := ' AND JOB_TYPE = ' || CHR(39) || e_typ || CHR(39);
sql_and3 := ' AND PILE_ID = ' || CHR(39) || pl_cd || CHR(39);
var_sql := sql_select || sql_from || sql_where || sql_and1 || sql_and2 || sql_and3 || sql_orderby;
DBMS_OUTPUT.PUT_LINE('SQL: ' || var_sql);
EXECUTE IMMEDIATE var_sql;
DBMS_OUTPUT.PUT_LINE('RATE= ' || payrt);
RETURN payrt;
ELSE
DBMS_OUTPUT.PUT_LINE('ERROR');
RETURN 1;
END IF;
END;
I have alternately tried this:
SELECT NVL(var_col,.01) into payrt
FROM TS_PAYRATES
WHERE PROJECT_ID = proj AND ACTIVE = 1
AND JOB_TYPE = CHR(39) || e_typ || CHR(39)
AND PILE_ID = CHR(39) || pl_cd || CHR(39);
as a substitute for the EXECUTE IMMEDIATE block, but I can't seem to use a dynamic substitution for the column name.
Any help would be greatly appreciated.

That's the most difficult part - the error messages seem to indicate a problem with the SQL statement in its execution context, because I can take the SQL string by itself and it executes perfectly.
Here are three variations:
SELECT INTO
select fn_get_payrate(21555, 30162, 15) from dual
ERROR at line 1:
ORA-00905: missing keyword
ORA-06512: at "PEOPLENETIF.FN_GET_PAYRATE", line 60
SQL: SELECT NVL(N4P , .01) INTO payrt FROM TS_PAYRATES WHERE PROJECT_ID = 701 AND ACTIVE = 1 AND JOB_TYPE = 'LHD' AND PILE_ID = '15'
Without SELECT INTO (returns NULL)
SQL> select fn_get_payrate(21555, 30162, 15) from dual;
FN_GET_PAYRATE(21555,30162,15)
SQL: SELECT NVL(N4P , .01) FROM TS_PAYRATES WHERE PROJECT_ID = 701 AND ACTIVE = 1 AND JOB_TYPE = 'LHD' AND PILE_ID = '15'
RATE=
EXECUTE IMMEDIATE USING
SQL> select fn_get_payrate(21555, 30162, 15) from dual;
select fn_get_payrate(21555, 30162, 15) from dual
ERROR at line 1:
ORA-01006: bind variable does not exist
ORA-06512: at "PEOPLENETIF.FN_GET_PAYRATE", line 61
SQL: SELECT NVL(N4P , .01) FROM TS_PAYRATES WHERE PROJECT_ID = 701 AND ACTIVE = 1 AND JOB_TYPE = 'LHD' AND PILE_ID = '15'

Decode possible without column name?

Hi,
I am trying to reformat text using decode as follows:
SELECT DECODE('a1a1','a','X','Z') FROM DUAL;
in order to convert 'a1a1' inro 'XZXZ'
However, this didn't work, so I tried:
SELECT DECODE('a1a1' as VARIABLE,'a','X','Z') FROM DUAL;
Any ideas what is the best way to do it?
I can do it using TRANSLATE, but that only applies one substitution, whereas I need two.

Decode is possible without a column name but it is looking for exact matches, ie if ('a1a1') = 'a' then 'X' else 'Z'In your example you can use translate:
select translate('a1a1','a1','XZ') from dual;
TRAN
XZXZor a nested translate
select translate(translate('a1a1','a','X'),'1','Z') from dual;
TRAN
XZXZMessage was edited by:
SamB

How to rename C00n generic column names in a Dynamic SQL report

I have a an interface whereby the user can select 1 to 60 (upper limit) columns out of 90 possible columns (using a shuttle) from one table before running a report.
To construct the SQL that will eventually execute, I'm using a "PLSQL function body returning SQL query" with dynamic SQL. The only problem is that I have to use "Generic Column Names" option to be able to compile the code and end up with c001 to c060 as the column names.
How can I use the names of the selected columns as the report headings rather than c001, C002... etc?
I do not know beforehand which columns, or how many columns or the order of the selected columns.
I know Denes K has a demo called Pick Columns but I can't access his code. I have a hunch though that he may be just using conditions to hide/show the apropriate columns.
thanks in advance
PaulP

Hi Paul
I would change the Heading Type in the Report Details screen to PLSQL and use the shuttle item to return the column values. e.g.
RETURN :p1_shuttle;
I'm assuming the shuttle already has a colon separated list of the column headings in the correct order?
I hope that helps
Shunt

Reading MS Project column names and data on the fly from a selected View

Hi guys,
I have several views on my project file (MSPROJECT 2010) and I want to build a macro so that;
1. User can select any view ( Views can have diffrent columns and the user may add new columns as well)
2. User runs the Macro and all the coulmns along with the tasks displayed in the view will be written to a excel file. ( I don't want to build several macro's for each view, I'm thinking of a common method which would work for any selected view)
The problem I'm facing is that how will i read the column names and data for a particular view on the fly without hard coding them inside the vba code ?
The solution needs to work on a master schedule as well.
Appreciate your feedback.

Just to get you started the following code writes the field name and data for the active task to the Immediate window.
Sub CopyData()
Dim fld As TableField
For Each fld In ActiveProject.TaskTables(ActiveProject.CurrentTable).TableFields
If fld.Field >= 0 Then
Debug.Print Application.FieldConstantToFieldName(fld.Field), ActiveCell.Task.GetField(fld.Field)
End If
Next fld
End Sub
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz

Oracle 10g - Defining the column name in Non English

Hi Experts,
I have an exisitng application which is developed on Windows using ASP Technology and uses Oracle 10g 10.1.0.2.0.
The application is supported with an instance of Data Base within which multiple tablespaces are created for different clients. The application is developed in such a way that some of the tables arecreated dynamically and the columns are named using the data entered through the UI.
This application needs to be globalized now. The problem is, the column name entered through the UI can be in any language based on the client's settings and those values in turn will be used for naming the columns in the tables.
1) Can I have the column names to be named using non english characters in Oracle 10g DB? If so,
1.1) what should I do to configure the exisiting Oracle instance to support it?
1.2) To what level is that configuration possible, is it per DB instance level (or) can it be done at Tablespace level. I would like to configure each tablespace to host tables with columns defined with different languages, say for example, tablespace 1 will have tables with Japaenese column names and tablespace 2 will have tables with German column names?
2) What should I do to make my entire DB to support unicode data i.e., to accept any language strings. Currently all strings are declared as VarChar2, should I change all VarChar2 to NVarChar2 (or) is there a way to retain the VarChar2 as is and make some database wide setting?
Please note that I do not have an option of retaining the column in English as per the Business Requirement.
Envionment:
OS - Windows 2003 32 bit
Oracle 10g 10.1.0.2.0
UI forms in ASP
TIA,
Prem

1. Yes, you can.
SQL> create table ÜÝÞ( ßàá number(10));
Table created.
SQL> insert into ÜÝÞ values (10);
1 row created.1.1 and 1.2 and 2. You can choose UTF as your default character set. It allows the user of non-English characters in VARCHAR columns in your whole database. It is not per tablespace.
SQL> create table ÜÝÞ( ßàá varchar2(100));
Table created.
SQL> insert into ÜÝÞ values ('âãäçìé');
1 row created.

What is the order of Column Names in Sqlite query results?

I am writing an application using Adobe Air, Sqlite, and Javascript.
After writing the following select statement:
          SELECT field1, field 2, field 3, field 4 FROM TableA;
I would like to get the columnName/data combination from each row -- which I do successfully with a loop:
          var columnName="";
          for (columnName in selResults.data[i]) {
               output+=columnName + ":" + selResultsdata[i][columnName] + ";";
My issue is that the column names come out in a different order every time I run the query and never once have they come out in the desired order -- field 1, field 2, field 3, field 4. If I run the query in Firefox's Sqlite Manager, the columns come out in the "proper" order. When I run them in Adobe Air, the order will be the same if I run the query mulitple times without closing the app. If I make a change such as declaring the columnName variable with "" before the for column, or declare it as (var = columnName in selResults.data) , then the order changes. If I shut down my app and re-open after lunch and run query, it comes out in another order. At this time, I'm not interested in the order of the rows, just the order of the columns in each output row. I've even tried assiging an index to columnName which seems to just pick up a single letter of the columnName.
I'm in the process of changing my HTML presentation of the data to assign a precise columnName to an HTML table title, but I'm reluctant to let go of the above concept as I think my separation of HTML/presentation and Javascript would be better if I could use the solution described above.
So, does anybody know how to force the order of the columnNames in my output -- or what I'm doing to cause it to come out in a different order?
Jeane

Technically there isn't any "order" for the return columns. They aren't returned as an Array -- they're just properties on an Object instance (a "generic object"). The random order you're seeing is the behavior of the for..in loop iterating over the properties of the object. Unfortunately, with a for..in loop there is no guaranteed order for iterating over properties (and, as you've seen, it tends to vary wildly).
The only solution is to create your own list of the column names and sort it the way you want to, then use that to create your output. For example, use the for..in loop to loop over the properties, but rather than actually get the values, just dump the column names into an Array:
var columnName="";
var columns = [];
for (columnName in selResults.data[i]) {
    columns.push(columnName);
columns = columns.sort(); // just uses the default alphabetical sort -- you would customize this if desired
var j = 0;
for (j = 0; j < columns.length; j++) {
    columnName = columns[j];
    output+=columnName + ":" + selResultsdata[i][columnName] + ";";

Can we use Column Names in Parameter Cursor

Hi
can we use Column Names in Parameter Cursor??
DECLARE
CURSOR Emp_Cur (P_Deptno NUMBER)
IS
SELECT Empno, Ename
FROM Emp
WHERE Deptno = P_Deptno;
BEGIN
FOR Emp IN Emp_Cur(10)
LOOP
DBMS_OUTPUT.PUT_LINE('The Employee Number is: '||emp.Empno);
DBMS_OUTPUT.PUT_LINE('The Employee Name is: '||emp.Ename);
END LOOP;
FOR Emp IN Emp_Cur(20)
LOOP
DBMS_OUTPUT.PUT_LINE('The Employee Number is: '||emp.Empno);
DBMS_OUTPUT.PUT_LINE('The Employee Name is: '||emp.Ename);
END LOOP;
END;
In the above Program, I send Deptnumber. If i send Column names like Empno, Ename. What can i do??
If Declare Samething Through Parameter Cursor, it doesn't accept VARCHAR2(Size)

For parameters you don't use size, just the type (DATE, NUMBER, VARCHAR2, CLOB, ...)
DECLARE
CURSOR Emp_Cur (P_Ename VARCHAR2)
IS
    SELECT Empno, Ename
    FROM Emp
    WHERE Ename = P_Ename;
BEGIN
FOR Emp IN Emp_Cur('SCOTT')
LOOP
    DBMS_OUTPUT.PUT_LINE('The Employee Number is: '||emp.Empno);
    DBMS_OUTPUT.PUT_LINE('The Employee Name is: '||emp.Ename);
END LOOP;
END;

Can I use bind variable instaed of writing static COLUMN Name

Hi , I am having a table containing id and column names, the data is stored against that id in other tables. Now I wish to update data into another table so that it goes into apppropriate column without using decode function.
I am trying to do this:
EXECUTE IMMEDIATE 'update TEST set :1 = :2
where PROJECT_ID= :3 and UNIQUE_ID= :4' using P_DEST_COLUMN, P_TEXT_VALUE, P_PROJ_ID, P_TASK_UID;
the values P_DEST_COLUMN, P_TEXT_VALUE, P_PROJ_ID, P_TASK_UID are populated using a cursor in PL/SQl
Is this statement valid? If not can you tell me how to do it as I am getting some error I am unable to comprehend.
thanks
Rishabh

Column names cannot be substituted at run-time as bind variables. If you need to specify the column name at run-time, you'd need to construct a new string and execute that string dynamically, i.e.
EXECUTE IMMEDIATE 'UPDATE test SET ' || p_dest_column || ' = :1 ' || ...From a data model standpoint, storing column names as data elements in another table is generally a rather poor idea. It's likely to make ad-hoc reporting nearly impossible and to cause a lot more parsing than would otherwise be required.
Justin

Need help on getting the column names of Tabletype

I have a table Mapping with the following values: This Mapping table contains the table names (in Tabname) and the column names(colname) of various tables and values(ValuesTobeFilled) for the columns.
I have to insert into the tables present in the Tabname field with the values present in the ValuesTobeFilled in the columns present in the Colname field.
Note: The Mapping table need not contain all the columns of the base table. The columns that are not present can be filled with null. And this mapping table is not fixed i.e. rows can be inserted/deleted frequently.
Sample values in mapping table:
Tabname                        Colname        ValuesTobeFilled
sample_items     Eno     Corresponding Expression to get the values from XML input
sample_items     Ename     Corresponding Expression to get the values from XML input
XXX     YYY     Corresponding Expression to get the values from XML input
Before filling in the actual tables, I have to store the entire data temporarily and I have used a tabletype declared as follows:
TYPE T_sample_items IS TABLE OF sample_items%ROWTYPE INDEX BY BINARY_INTEGER;
l_sample_items T_sample_items;
Where the table sample_items have the following columns:
•     Eno
•     Ename
•     Eaddress
•     Eemail
So, the tabletype should be filled as:
Eno     Ename     Eaddress     EEmail
1     XXX     -     -
I have declared a cursor to select the values from mapping table and I need to fill in the ValuesTobeFilled values to the corresponding table.
CURSOR c_xpath (c_tname mapping.TABNAME%type)
IS
select * from mapping where tabname = c_tname;
CURSOR c_tables
IS
SELECT DISTINCT TABNAME FROM mapping;
FOR crsr IN c_tables
LOOP
p_tname := CRSR.TABNAME;
FOR csr IN c_xpath(p_tname)
LOOP
IF l_xml_doc.EXISTSNODE(CSR.XPATH_EXP) = 1
THEN
l_node_value := l_xml_doc.extract(CSR.XPATH_EXP).getStringVal(); -- This is the value to be stored in the corresponding column
ELSE
     l_node_value := NULL;
END IF;
IF CSR.COLUMN_NAME = ‘eno’
THEN
     l_sample_items(1).eno := l_node_value;
ELSIF CSR.COLUMN_NAME = ‘ename’
THEN
     l_sample_items(1).name := l_node_value;
END IF;
END LOOP;
END LOOP;
And I need to eliminate hard coding while comparing the column names (in the following piece of code) as the Mapping table values are subject to insertion/deletion:
IF CSR.COLUMN_NAME = ‘eno’
THEN
     l_sample_items(1).eno := l_node_value;
ELSIF CSR.COLUMN_NAME = ‘ename’
THEN
     l_sample_items(1).ename := l_node_value;
END IF;
I need to insert the values directly into the tabletype without this hardcoding. Please suggest me ways to compare the mapping table values with the field (column) names of the tabletype. If it is not possible using tabletype, please suggest any other ways of fixing the problem.
Many thanks,
Gopi

I take it this isn't going to be a serious production system at the end of the day?
Storing metadata in tables for extraction and insertion of data is just wrong in so many ways. It smells heavily of Entity Attribute Value modelling, which is the most wrong way to use a relational database and is known to have major performance implications and be liable to bugs and issues. The idea that EAV modelling allows for 'generic' databases where new data items can be added flexibly later on without having to change code is usually justified with an excuse of "it means we don't have to update all our tables when we want a new column" which is easily countered with "if you're adding a single column a good relational design wouldn't require you to add it to more than one table anyway in most cases".
Just what exactly are you trying to do and why? There has to be a better way.

Excel 2013 connect to a cube, and Power View concatenate the column name by default

Hi Guys,
Currently, we met a problem with excel services to connect to a cube, when we develope a Excel 2013 Powerview report, the data model column name is concatenate into terrible name by default. e.g. Dim TimeDate Date, Dim TimeTime HierachyYear -Month.
But when start up the data model with Powerpivot, everything gone well. We knew that it can be manual update the name as workaround, but we need to do it every time we create a new powerview with the data model.
Is that any other solution we can do with?
Please help.
Johnny

Hi,
As this question is more related to PowerView Report, I suggest you can create a new post in the PowerView forum, you will get more helpful information from there.
PowerView Forum:
https://social.technet.microsoft.com/Forums/en-US/home?forum=powerview
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jerry Guo
TechNet Community Support

Why do I get a class conflict between the Prepare SQL.vi and the Get Column Name.vi with the SQL Toolkit compatibility vis from the Database Connectivity Toolkit?

I have done extensive programming with the SQL Toolkit with LabVIEW versions through 6.1. My customer now wants to upgrade to Windows 7, so I am trying to upgrade to LabVIEW 2009 (my latest purchased version) using the Database Connectivity Toolkit, and the SQL Toolkit Compatibility vis. Everything seemed to be going okay with the higher level SQL operations, but I ran into trouble with the Get Column Name.vi.
The pictures below show the problem. The original SQL Toolkit connected the Prepare SQL.vi with the Get Column Name.vi with a cluster of two references, one for connection, and one for sql. The new compatibility vis have a class conflict in the wire because the Prepare SQL.vi contains a cluster with connection, and command references, but the Get Column Name.vi expects a cluster with connection and recordset references.
How do I resolve this conflict?
Thank You.
Dan

I've never worked with the old version of the toolkit, so I don't know how it did things, but looking inside the SQL prep VI, it only generates a command, and the the column name VI wants a recordset. I'm not super familiar with all the internals of ADO, but my understanding is that is standard - you only have the columns after you execute the command and get the recordset back. What you can apparently do here is insert the Execute Prepared SQL VI in the middle and that will return what you need.
I'm not sure why it worked before. Maybe the execute was hidden inside the prep VI or maybe you can get the column names out of the command object before execution. In general, I would recommend considering switching to the newer VIs.
Try to take over the world!

Column name substitutions

Similar Messages

Maybe you are looking for