Column names shows as untitled in a chart

I have created a table with row one showing days 1 to 28, row 2 shows speed attained on that day.
So basically 1 to 28 are the column names.
However when I create a chart by selecting row 2, instead of showing days 1 to 28 along the bottom, it shows as "untitled 1" etc. Can anyone help please?

Pete,
Yes, a Line Chart wants to see a text (vs. Value) entry for the category axis label, and with a Header you are defaulting to Text.
I would suggest that you may be happier in the long run with dates running down the first column rather than across the first row. Not imperative, but something to keep in mind if excessive scrolling becomes an issue for you.
Jerry

Similar Messages

How do you get table column names to show one time per page

I have a report where I want the column names to show one time per page.
I have the table with the column names set below the header and above the
'for-each Row'.
When I view the report in PDF format the colunm names show only one time on the first page and on the other pages the column names do not show at all. If I view the report in RTF, the same thing happens, shows column names on the first page, but not on the other pages after that.
I highlighted the table and went to table properties, clicked on ROW tab and then checked (Repeat as header row at the top of each page) and it still does not work for PDF or RTF format. I have looked at other forums with this issue and it doesn't work for me in PDF format.
Could someone tell me what I am doing wrong.....
I appreciate anyone that can help me.
Thank you,
Susie

I figured out what I was doing wrong.
I was creating a seperate table for the column names and not using the table where the column names where created originally. I deleted the column names from the original table and created a seperate table above that table with the column names only.
So I went back to the original table and highlighted the row with the column names and went to table properties/ROW tab/ and clicked (Repeat as header row at the top of each page) and now it works perfectly in PDF format where the column names show one time for each page. Deleted the other table where I had the column names only.
thanks
Susie

Listdata.svc - shows column names?

I have leveraged the REST service using listdata.svc many times. However, we are having trouble with one site in particular. Cannot use REST with it and getting all sorts of errors in Visual Studio. This post is not about VS or C#, however, just about
what should be in the REST schema period. I am seeing tons of huge node values when looking at the listdata.svc in a browser. It appears these are a combination of the list name and the column name. I didn't think column names showed up at all,
just list names?
For example:
<collection
href="InvestmentPortfolioAnticipatedProjectTeamSizeFTESContractorsCustomersVendorsEtc">
<atom:title>InvestmentPortfolioAnticipatedProjectTeamSizeFTESContractorsCustomersVendorsEtc</atom:title>
I found that Investment Portfolio is a legit list in the site, but the rest of that value is a column name. Other lists do not have columns listed in this schema when viewing from the browser. Can someone explain to me why this is happening?
Thanks

Hi,
If you access http://siteurl/_vti_bin/listdata.svc, the preceding url returns all the lists in XML format. There will be no column name included in a <collection> node for normal lists, except when
there is Choice column in this list.
There will be extra <collection> nodes listed as the format below for the lists which contains Choice column:
<collection href="ListnameColumnname">
<atom:title>ListnameColumnName</atom:title>
</collection>
It seems this extra <collection> node is for internally use only which is not designed to be exposed to developers.
I would suggest you submit a feedback to the Office Developer Platform if there any expectation about the documentation about SharePoint APIs:
http://officespdev.uservoice.com/
It is a place for customers provide feedback about Microsoft Office products. What’s more, if a feedback is high voted there by other customers, it will be promising that Microsoft Product Team will take it into consideration when designing the next version
in the future.
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Dynamic column names

I created a line chart with the following sql statement:
select null link, periode_jaar, sum(totaal) total from V_KPL_VZ_OWB@rapportage_dwhtest
where periode_jaar = (Select max(periode_jaar) from V_KPL_VZ_OWB@rapportage_dwhtest)
group by periode_jaar
order by periode_jaar
In the legend of the chart the line is named total. I would like have it named for example: Total 2009
So how i create the dynamic column? Any ideas? Tnx in advnaced

tnx for helping, i posted my xml code below where to put the tag: <format>{%Name} ({%Value})</format>
i assume i have to replace %Name with my sirie name and the %Value with the name i wanted?
Is it possible to replace %Value with an item like :p1_year
<?xml version = "1.0" encoding="utf-8" standalone = "yes"?>
<root>
<type>
<chart type="2DLine">
<animation enabled="yes" appearance="size" speed="10" />
<hints auto_size="yes">
<text><![CDATA[{NAME}, {VALUE}]]></text>

</hints>
<names show="yes" width="150" placement="chart" position="bottom" >

</names>
<values show="no" prefix="" postfix="%" decimal_separator="," decimal_places="0" />
<arguments show="no" />
<line_chart left_space="5" right_space="5">
<block_names enabled="no" />
</line_chart>
</chart>
<workspace>
<background enabled="yes" type="solid" color="0xffffff" alpha="0" />
<base_area enabled="no" />
<chart_area enabled="yes" x="80" y="50" width="380" height="280" deep="0">
<background enabled="no"/>
<border enabled="yes" size="1"/>
</chart_area>
<x_axis name="Jaar" smart="yes" position="center_bottom" >

</x_axis>
<y_axis name="%" smart="yes" position="left_center" >

</y_axis>
<grid>
<values />
</grid>
</workspace>
<legend enabled="yes" x="480" y="50">

</names>
<values enabled="YES"/>
<scroller enabled="no"/>
<header enabled="no"/>
<background alpha="0"/>
</legend>
</type>
#DATA#
</root>

Can we customize the column name in filter view?

When i select filter view and select an option from the drop down, it shows the name of the column and not the variable set in the prompt.
I want to customize that name so that it does not show the column name,shows the name given by us instead.
Please Help!!!

You can't customize the filter view, play around with the narrative view instead.
Regards,
Stijn

How can I customise Thunderbird message columns to show sender raw address (not display name) and the "Received for" email address that was used to reach me?

I find it increasingly important to be able to see a sender's actual email address rather than just display name, as they usually don't show a company name - which a domain always would. Is there a way to customise settings/write a script/tweak files to add raw email & domain name columns? When dealing with a number of people at the same company it is hard to order or glance through a list of emails to find them. I also know 2 people with the same name at different companies and it is impossible to distinguish!
Secondly, as a related column addition, since a number of email aliases reach me it would be useful to have a column to show the "Received..for" part of the message source which reveals the actual email used in the To/CC/BCC which led to me. Again can this be tweaked or scripted?
I have programming experience but have not made add-ons and would be open to a suggestion which involves creating a custom add-on if adding columns with custom values is possible that way.
Best Regards,
Drew

Extended message headers can be searched from Edit/Find/Search Messages, or the folder context menu, by adding custom headers to the search criteria. So, you might be able to create a search on specific properties of a message.
The method of adding custom headers to searches is the same as the one described here for filters:
http://kb.mozillazine.org/Filters_(Thunderbird)#Custom_headers

Not showing the column name

Hi
I am using jdev 11.1.1.3
.i i dragged an adf table from data control.it has got 3 columns.i changed the name of first column as Lang grades.when i run that it is showing the column name as lang grades.then in that table two fields r mandatory.so in the property inspector i put the show required as true.but after that on running it is not showing the column name as lang grades.there is only the star sign for showing the attribute as required only.

Hi,
not enough information. So from your description, a column that is not marked required on its cell renderer component is not displayed at runtime. I am not aware of such a problem and suggest to try a later version of 11g R1 (11.1.1.6) to see if this reproduces. This allows you to exclude a probelm with 11.1.1.3 only
Frank

Can I show the column name for my legend?

I have a bunch of graphs where the legend labels (ie. the values from the column) aren't really informative (ie. simple numeric values), and are part of a dimensional hierarchy, so you might see a graph whose legend has 1, 14, 38, 141 and you click on one of them and get another graph whose legend is 345, 6546, 2342. My current solution is to create a logical column prepending the value with a column name, so my values are now "District 1", "District 14", "District 38", "District 141". But it would be so much nicer if I could just show "District" above the legend. Is there any way to do this?

My be this can give you a help:
[code]
SELECT *
FROM   ALL_CONSTRAINTS
WHERE R_CONSTRAINT_NAME IN (SELECT CONSTRAINT_NAME
                                                           FROM   ALL_CONSTRAINTS
                                                           WHERE TABLE_NAME = 'TABLE_NAME'
[/code]

Changing column name in Line chart

Hello All,
We are BO 4.0 SP6.
We are creating WEBI reports which includes charts as well.
We have two columns " Current Period" and "Last Period" and using them in WEBI report and Line chart.
In the table I am displaying the column name " Current period " as "Oct-14" using some formula.
But I am not able to change the name in the chart.
Can we change the column name in the graph using some formulas? Please advice.
PFA the screenshot for your reference.
Regards
Prasad Ambati

Hi,
Do not Drag it inside chart area .
Align Them above Legend Text ( Current Period ),
so that Actual Legend Text will be hidden .

UD Datasource Proposal Tab Shows Incorrect Column Names

I created a UD datasource in BW and the "Proposal" tab showed me the correct column names for the table I had selected. A couple of column names were then changed for this table in the source system but they are not showing up in the "Proposal" tab (the old column names are still there). I refreshed and reactivated the source system in BW but it didn't work. Any ideas on how to get the new column names to show up in the "Proposal" tab? Thanks for any help on this.

hi,
check with the following steps you carried out in the ud data source creation.
You are in the DataSource tree in the Data Warehousing Workbench.
       1.      Select the application components in which the DataSource is to be created and choose Create DataSource.
       2.      In the next screen, enter a technical name for the DataSource, select the type of the DataSource and choose Copy.
The DataSource maintenance screen appears.
       3.      Go to the General tab page.
                            a.      Enter descriptions for the DataSource (short, medium, long).
                            b.      If necessary, specify if the DataSource builds an initial non-cumulative and supplies potentially duplicate data records within a request.
       4.      Go to the Extraction tab page.
                            a.      Define the delta method for the DataSource.
                            b.      Specify whether you want the DataSource to support direct access to data.
                            c.      UD Connect does not support real-time data acquisition.
                            d.      The system displays Universal Data Connect (Binary Transfer) as the adapter for the DataSource.
Choose Properties if you want to display the general adapter properties.
                            e.      Select the UD Connect source object.
The connection to the UD Connect source is established. All source objects that are available in the selected UD Connect source can be selected using input help. Source objects can be multi-dimensional storage or relational objects.
       5.      Go to the Proposal tab page.
The system displays the elements of the source object (for JDBC for example fields, or for XMLA and ODBO characteristics and key figures) and creates a mapping proposal for DataSource fields. The mapping proposal is based on the similarity of the names of the source object element and DataSource field and the compatibility of the respective data types.
Note that source object elements can have a maximum of 90 characters. Both upper and lower case are supported.
                            a.      Check the mapping and change the proposed mapping as required. Assign the non-assigned source object elements to free DataSource fields.
You cannot map elements to fields if the types are incompatible. The system produces an error message in this case.
                            b.      Under Copy to Field List, select the fields that you want to transfer to the field list for the DataSource. All fields are selected by default.
       6.      Maintain the Fields tab page.
Here you edit the fields that you transferred to the field list of the DataSource from the Proposal tab page.
                            a.      Under Transfer, specify the decision-relevant DataSource fields that should be available for extraction and transferred to BI.
                            b.      If required, change the values for the key fields of the source.
These fields are generated as a secondary index in the PSA. This is important in ensuring good performance for data transfer process selections, in particular with semantic grouping.
                            c.      If required, change the data type for a field.
                            d.      Specify whether the source provides the data in the internal or external format.
                            e.      If you choose an External Format, ensure that the output length of the field (external length) is correct. Change the entries, as required.
                              f.      If required, specify a conversion routine that converts data from an external format into an internal format.
                            g.      Select the fields for which you want to be able to set selection criteria when you schedule a data request using an InfoPackage. Data for this type of field is transferred in accordance with the selection criteria specified in the InfoPackage.
                            h.      Choose the selection options (such as EQ, BT) that you want to be available for selection in the InfoPackage.
                              i.      Under Field Type, specify whether the data to be selected is language-dependent or time-dependent, as required.
Note
If you did not transfer the field list from a proposal, you can define the fields of the DataSource directly. Choose Insert Row and enter a field name. You can specify InfoObjects in order to define the DataSource fields. Under Template InfoObject, specify InfoObjects for the fields of the DataSource. This allows you to transfer the technical properties of the InfoObjects into the DataSource field.
Entering InfoObjects here does not equate to assigning them to DataSource fields. Assignments are made in the transformation. When you define the transformation, the system proposes the InfoObjects you entered here as InfoObjects that you might want to assign to a field.
       7.      Check, save and activate the DataSource.
       8.      Go to the Preview tab page.
If you select Read Preview Data, the number of data records you specified in your field selection is displayed in a preview.
This function allows you to check whether the data formats and data are correct.
Result
The DataSource is created and added to the DataSource overview for the UD Connect source system in the application component in the Data Warehousing Workbench. When you activate the DataSource, the system generates a PSA table and a transfer program.
You can now create an InfoPackage. You define the selections for the data request in the InfoPackage. The data can be loaded into the entry layer of the BI system, the PSA. Alternatively you can access the data directly if the DataSource allows direct access and you have a VirtualProvider in the definition of the data flow.
http://help.sap.com/saphelp_nw70/helpdata/en/bc/ed1640b7b6dd5fe10000000a155106/frameset.htm
hope this give you an idea
regards
harikrishna N

Jtable not showing column Names

I wrote the following Code and strangely it isn't showing the column Names....
The mistake should be foolish..but i can't figure it out...
can you please help.. or give any alternate way to do the same
import javax.swing.*;
import javax.swing.table.*;
public class test
     public static String[] columnNames = {"User Name","User ID"};
     public static void main(String args[])
          JFrame frame = new JFrame();
          frame.setSize(400, 400);
          DefaultTableModel tabmodel = new DefaultTableModel(columnNames, 15);
          JTable table = new JTable(tabmodel);
          frame.add(table);
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          frame.setVisible(true);
}

Hi,
A JScrollPane is needed to display the headers.
import javax.swing.*;
import javax.swing.table.*;
public class TestTable {
    public static String[] columnNames = { "User Name", "User ID" };
    public static void main(String args[]) {
     // PB All GUI creation on the EDT
     SwingUtilities.invokeLater(new Runnable() {
         @Override
         public void run() {
          JFrame frame = new JFrame();
          frame.setSize(400, 400);
          DefaultTableModel tabmodel = new DefaultTableModel(columnNames,
               15);
          JTable table = new JTable(tabmodel);
          // PB frame.add(table);
          frame.add(new JScrollPane(table)); // PB
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          frame.setVisible(true);
}Piet

Show column names in a table

Stupid question time...
How do I display the column names in a table on the front panel? I thought by right clicking on the table would give me a selection to display them.
Solved!
Go to Solution.

Hi Eric,
you can set the cell background color of the "Active cell" (read the help for that property!) with a property node.
To get the clicked cell you can use a method of the table to convert mouse coordinates (given by the event structure) to row/column coordinates!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Export from SP list to Excel: Excel doesn't show changed colum name. It shows only the original column names, which would be done by the column creation.

Hello,
I have an excel list with some columns. I changed the name of some of the column. When I export this list to excel, I always get the first column name, which was created by the creation of the column, and not the new one.
Is there some possibility to export a SP list to export with the new column names?
I'm waiting for your help,
BR
Damian

Hi Damian,
I tested in my environment, change the column name and export to excel list, the exported field name is the correct one.
Please check the column name from somewhere else from site UI, you could check from SharePoint designer or powershell script.
[system.reflection.assembly]::loadwithpartialname("microsoft.sharepoint")
$site= New-Object Microsoft.SharePoint.SPSite ("http://siteurl")
$web=$site.OpenWeb()
$list=$web.Lists["CustomList"]
$list.Fields |select ID, title, internalname| more
In addition, I wonder if the issue occurs to all lists or one specific list. If the issue only occurs to one list, please try to save this list as template and create a new list based on this list and test the issue again.
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Dynamic column name in OBIEE

Hi all,
In my report i need to show one chart view. I'm having one prompt. There the user is asked to select a no. for eg. say 10. and a date eg. 10-JAN-09. So my report should show the data from 10-JAN-09 and go backwards to 10 days. if he selects 5 days then only 5 days of data only need to show from that date. This part is ok. The chart has five sections in it. They are
1) 80-100% of the time period
2) 60-80%
3) 40-60%
4) 20-40%
5) <20%
So the legends should vary according to this.
Suppose if the user selects 10 days then the legend should be,
1) 8-10 days
2) 6-7 days
3) 4-5 days
4) 2-3 days
5) less than 2 days
If user selects 5 means then the legend should be,
1) 5 days
2) 4 days
3) 3 days
4) 2 days
5) 1 day
In the prompt im saving this value in one variable. So all i need to do is to apply aggregation on the variable and place it in the column name. But i dont know where to give it. Please help.
Thanks,
Karthick

Hi when you dynamically change the table column that will automatically reflect in the chart legend.
please check the following link for dynamically changing column header name
http://oraclebizint.wordpress.com/2008/01/25/oracle-bi-ee-101332-dynamic-column-headers-using-presentation-variables-sets-and-conditional-formatting/

How to rename C00n generic column names in a Dynamic SQL report

I have a an interface whereby the user can select 1 to 60 (upper limit) columns out of 90 possible columns (using a shuttle) from one table before running a report.
To construct the SQL that will eventually execute, I'm using a "PLSQL function body returning SQL query" with dynamic SQL. The only problem is that I have to use "Generic Column Names" option to be able to compile the code and end up with c001 to c060 as the column names.
How can I use the names of the selected columns as the report headings rather than c001, C002... etc?
I do not know beforehand which columns, or how many columns or the order of the selected columns.
I know Denes K has a demo called Pick Columns but I can't access his code. I have a hunch though that he may be just using conditions to hide/show the apropriate columns.
thanks in advance
PaulP

Hi Paul
I would change the Heading Type in the Report Details screen to PLSQL and use the shuttle item to return the column values. e.g.
RETURN :p1_shuttle;
I'm assuming the shuttle already has a colon separated list of the column headings in the correct order?
I hope that helps
Shunt

Column names shows as untitled in a chart

Similar Messages

Maybe you are looking for