Column not displaying after added by personalization in Advance table

Hi,
I am working in Upgradation project from 11i to R12. I saw that the personalization have alredy migrated in the R12 instance. However these personalization are not displaying in Advance tabel in R12. these are the 4 custom columns which are already present and displaying in 11i. But these are not displaying in R12. I have check Functiona administrator that the personalization are not deactivated. Have checked that rendered property is TRUE for that personalization. I have also checked .xml file from list customization and print document -- jdr_utils...but the files are same in 11i and R12. I have added a custom column by personalizatio but this column also not displaying. Can you please take a light on this issue...I will be highly thankful to you?
Thanks
Vikram

Hi Vikram,
Check 4 Custom Attribute is available or not in Translatable Items of Particular Page Via About This Page link.
If attribute available then Please do Re-personalization only in R12 for 4 custom column.
Otherwise You need to do VO Extension Again in R12.
Thanks,
Dilip

Similar Messages

Oem web page will not display after O/S dst patch

Hello,
The Grid web page will not display after we DST patch for the o/s.
All below start fine without any errors:
emctl start oms
emctl start iasconsole
opmnctl startall
emctl start agent
The Grid web page is not displaying. What might happened after the o/s dst patch that might cause this? Our GRID is 10204 with a 10104 repository. The 10104 has not yet been dst patch.
What logs should I be looking at to figure why the web page is not displaying? Thank you.

Provide the output of these comands:
$OMS_HOME/bin/emctl status oms
$OMS_HOME/opmn/bin/opmnctl status
$AGENT_HOME/bin/emctl status agent
$DATABASE_HOME/bin/sqlplus "/ as sysdba" << EOF
SELECT STATUS FROM V$INSTANCE;
EOF
$DATABASE_HOME/bin/lsnrctl status LISTENER_NAME
Regards

My iBook will not display after Power up Chime

Please I need Help.
My iBook (16VRAM) Does not display after the power up chime. so i have tried to reset the PRAM by holding down CMD, OPTION, P & R after the chime, But Nothing Happens, I dont hear a second chime (I dnt Knw how long am suppose to hold down the keys, But i held it for 2 mins and still nothing)
Please help.
Thanks.

Welcome to Apple Discussions Aaron
Force quit in the middle of an installation spells "trouble". Try starting the computer in Safe Mode. If successful, restart the computer and see if it fully boots. If not, you more than likely have directory damage that needs to be repaired. Disk Utility may be up to the task.
Post back

Forms not displaying after ATG 7 patch

Forms not displaying after ATG 7 patch., 11i Linux OS.
6241631

Hi;
AFAIK no, i also cant see this info at below doc
About Oracle Applications Technology 11i.ATG_PF.H.delta.7 (RUP 7) [ID 783600.1]
Please check upper note below part and be sure you have all those steps on your issue:
-Known Issues
-Instructions for Applying Oracle Applications Technology Update for 11i.ATG_PF.H.delta.7
-Implementation and User Documentation
Regard
Helios

Thumbnails do not display after using rebuild tool

I am using OSX 10.7.5, and iPhoto 8.1.2.
recently I made a back up copy of my files.
I then reinstalled my operating system.
I then copied my iphoto library back onto my computer.
imported my iPhoto library into iPhoto
Pictures are in iPhoto.
Thumbnails do not display.
I have used the rebuild tools provided by iPhoto.
Still no thumbnails displaying.
any other ideas?

It relates to your suggestion in that, the reason I posted was to solve a thumbnail issue.
"re: Thumbnails do not display after using rebuild tool"
Terence suggested reloading my back up library.
I asked Terence where I should import to.
I was thinking that my thumbnail issue was related to the way I imported my back up.
You clarified where to import the library...
I tried it and I still have no thumbnails
I have already tried repairing permissions and rebuilding thumbnails using the i photo repair tool.
can you help me?

Autocomplete does not work after adding controller to LOV

Hi experts ,
Autocomplete does not work after adding controller to LOV Region, i have checked the fnd_compatialbe mode it is fine.validation proprty is also false, stilll it is not working.
can anyone help me its very urgent
regards
vamsi

Hi Tapash,
This resolved the problem. Many thanks for your help with this it has been driving me mad for the last few days.
I could not understand why the standard Apps LOV regions had controller's attached to them and the autocomplete would function but with my pages it would not.
I actually raised a TAR about this and got nothing back so have updated it with the resolution.
Thanks again.
Regards,
David

Personalization in Advance Table

All,
When I change the value of property "Records Displayed" through personalization for advanced table , it does not get reflected in the UI , where as if I do setting Property value "Record Set Size" is getting reflected in the HGRID UI.
Is this issue with Advanced Table, or are we missing anything on this?
Thanks
Joseph George

Mukul,
I also had that though that it might be overridden in controller code. But it doesn't look possible on multiple pages and I can't think of a scenario where they have to set it programatically on multiple pages. Makes sense if the bean was created and rendered dynamically but not on all the pages :)
--Shiv

Newly added column not displayed in Interactive report

Hello,
I have a tableA with 3 columns.In the application i am displaying as Form with Report region as Interactive report(Oracle 10g Application Express 3.2).
I added one column to tableA.Now when i am refreshing the report by adding that column in the select query,the new added column is not displayed in the application.
How can i do this so that the added column can be displayed.I dont want to delete the whole thing and redo it again.
Thanks
Siya

Hi Siya,
The Interactive Report will not show you the newly added columns by default. You have to select those columns from the actions menu and when all the required fields are displayed then save it as the default report.
Then you will be able to see all the columns.
Hope this solves your problem.
Thanks,
Satish.

Expiration date not displaying after upgrade from 2007 to 2013

I recently upgraded from MOSS 2007 to 2013. I have information management set up on a library of InfoPath forms. For the forms that were created prior to the upgrade, the expiration date is displaying and actually get updated if I modify them.
But none of my forms that have been created after the upgrade, are displaying when the expiration date is, which should be one year from modify date. If I modify the forms created prior to the upgrade, they reflect the new, update date.
Are these new forms not getting the policy applied to them, and why not? I am not sure why the older forms are getting updated, but not my new ones.
Denise E.

Hi Denise,
According to your description, my understanding is that the Expiration date column was not displaying values after upgrading from SharePoint 2007 to SharePoint 2013.
Per my knowledge, we can only use the date column which is added to the library or list or the Declared Recorded date to set the retention policy, so if the Expiration date is used in the retention policy then the Expiration date should be a column in the
library or list.
I recommend to check the retention policy in the library and see which column is used in the retention policy as the image below shows:
After that, go to the Library settings to find this column.
Could you please provide screenshots of the retention policy and the columns in the Library settings page?
Best regards.
Thanks
Victoria Xia
TechNet Community Support

New created values are not displaying after upload

Hi
I have created 2 key figures(Infoobject),4 new nodes and leafs(Hierarchy), to include the new logic at R/3 end as well as BW end.Every thing is fine even after doing full upload(repair).
When i execute the query the data is not populated in its respective infoobjects and hierarchy nodes and leafs.
Even 1 infoobject which is used for Counter value is not showing the counting as it's defined as aggregate to the info object Count and that included to ODS which is responsible for counting. after full upload it's not showing the counter values.
After full upload(Repair) all these entries are not displaying in the report against the data which is present at RSA3 level.
Can any one tell me how to make them available in the query even after data is uploaded / available in the bw.
Gaurav Upadhyaya
Edited by: Gaurav on Aug 26, 2008 10:55 AM

Hi,
You can´t see hierarchies in an infoprovider, so this is ok. A hierarchie is a part of an infoobject. But you say you have 2 new kefigures and they are not filled. I suppose you added both keyfigures to your DSO/Cube and to the datasource (in your source system). Have you extended the transformations between datasource <-> DSO and DSO <-> Cube too? Are the keyfigures correctly connected (in the transformations)? If yes, check your PSA after loading. Are the keyfigures filled here? If no, check the RSA3 in your source system. Are the fields for you keyfigures filled there?
Pls. check this all and tell us, what the result is.
Regards

Canvas not displaying controls added with addChild

I have a custom class holding some information, a property in
the class is an XML string and another method parses the XML add
creates controls (labels and buttons) based on the xml. I also have
a variable named renderer which is a mx.containers.Canvas. After
the XML is loaded and the controls are added using
Canvas.addChild() I add the Canvas to my stage. The problem I'm
running into is that even though the Canvas is added to the stage,
I cannot see any of the controls inside of the canvas. Doing a
trace(Canvas.numChildren()); I can see that I have added 101
children to my canvas container (which is what my xml file shows)
however they will not display. I know the canvas has been added to
the stage because I can see the scroll bars when i set the policies
to "on" and it even sets the scroll bars correctly if the
components are too big for the canvas and would have to be scrolled
down to see them all, it just doesn't show any of the components.
Anyone run into a similar issue?

Did you set an explicit width and height (or percentWidth and
percentHeight, or styles top, left, top, bottom) on the controls
you create? By default controls have 0x0 size. Creating controls in
MXML causes additional code to be generated which gives the
controls default sizes, but it won't happen in your own
ActionScript code.

SAP Webdispatcher :Images are not displayed after using the URL filtering

Hello,
I have installed the SAP webdispatcher 7.3 on Linux redhat 5.4 in front of the Portal 7.3.
I wanted to restrict the access just for the IRJ prefix so for this i used the parameter wdisp/permission_table = PermFile
with Permfile as follows:
#Denial of the useradmin URL from the WebDispatcher
P /irj*
P /irj/*
The filtering is working well except that for IRJ the images are not displayed so i was using so i added the following line to disply the images to the logon page
icm/HTTP/auth_
P /logon_ui_resources/*
P /logon_ui_resources*
but i still have the same issue for the irj page where no icons are displayed and i can do nothing.
The same issue also happened when using the icm/HTTP/auth_xx
Do you have an idea how to deal with this issue?
Thanks in advance;
Hassan

Hello,
After checking the HTTP code of the irj page on IE, i foud the needed URL to permit so i modified the permision table and it works fine for the moement
P /irj*
P /irj/*
P /logon_ui_resources/*
P /logon_ui_resources*
P /AFPServlet/*
P /AFPServlet*
P /com.sap*
P /com.sap/*
P /webdynpro/resources*
P /webdynpro/resources/*
Thanks for you help,
Hassan

Master-detail: detail field not displayed after changed by master field

I want to use the Depends on item with Clear/refresh value functionality in a master detail situation. Within the same group it is no problem to use the setter method of a field to change a second field and then displaying this new value. But in the detail group, I can not select items from the master group as a depends on item.
In the setter of the master field, the value in a field for each row in the detail (table layout) is updated. The only problem is that this updated value is not displayed, the old value doesn't change. When saving the changes, the displayed value is committed to the database. When de updated field is not displayed at all, the correct value is saved, so I know the detail field is updated.
How can I make sure the displayed value in the detail is displayed after changeing a master field? I already gave the detail field the correct partial trigger.

Wouter,
I guese you don;t see the changed value when you display the detail item because after the depends on item update changed the detail item, JSF procesing continues and the detail table changes are sent to the server which will override again the detail item attriibute, resetting it to the old, still displayed value.
So, the trick is to get PPR working. Make sure the partialTYriggers property of the detail item is set to the value of the id property of the master item. If it still doesn't work, try setting the partial triggers property on the table, instead of the individual item.
Steven Davelaar,
JHeadstart team

ALV Title Not Display after transporting the Programme from DeV to Qlty

Hellow Experts,
i developed one ALV report with two screens, i transported the report from Development server to Qulaity server.
in Development server report are working fine but in Qulaity server after transporting the TiTle of ALV not display , plz give me some hint , below is my code to display alv title
DATA: alv_grid       TYPE REF TO cl_gui_alv_grid.
DATA:alv_grid_ref type ref to CL_GUI_ALV_GRID.
DATA: layout    TYPE lvc_s_layo.
layout-grid_title = 'Daily Material Reports.' .
DATA: fieldcat TYPE lvc_t_fcat.
I m using ALL METHOD alv_grid->set_table_for_first_display method for display alv .
Thanks,
Regards
Neha.

Hi neha,
use the sap/help link to solve your issue,
[http://help.sap.com/saphelp_erp2004/helpdata/en/0a/b5533cd30911d2b467006094192fe3/content.htm]
if not use the below example code ,
Heading 3 :h3 Set the title of the grid
Fill the grid_title field of structure lvc_s_layo.
Note that the structure lvc_s_layo can be used for to customize the grid appearance in many ways.
DATA:
ALV control: Layout structure
gs_layout TYPE lvc_s_layo.
For example :
Set grid title
gs_layout-grid_title = 'Flights'.
CALL METHOD go_grid->set_table_for_first_display
            EXPORTING
           i_structure_name = 'SFLIGHT'
is_layout      =gs_layout*
           CHANGING
          it_outtab   = gi_sflight.
Regards,
Saravana.S
Edited by: saravanasap on Dec 21, 2011 8:13 AM

Mac Mini login not displayed after screensaver

I have a Mac Mini that routinely (several times a week) will not display the login screen after the screensaver has kicked in. The screensaver is running find (e.g. changing which pictures are displayed) but when you move the mouse to stop the screensaver the photo being displayed freezes and the login (list of users) is never displayed. When this happens it is either hold in the power button or do a remote login to use the command line to force a reboot. This problem has existed for many months (multiple Mac OS X updates).
When this happens there are typically two users logged in. One an administrator and one a regular user with a few limitations. Parental Controls are enabled for the second account.
I tried searching the forum and couldn't find a solution mentioned. I apologize if there is one mentioned. Any help would be appreciated. This is a big issue since this is the machine my young kids use and they're not techie enough to reboot without risking corrupting file systems.
Mac Mini 2.26GHz
Mac OS X 10.6.7
Has one External drive connected and always on
Is set to never sleep (it acts as a server)
Is set to reboot on power outages

Okay, this is strange. I tried restarting three times yesterday with the same results. In fact I left it go overnight only to find the next morning that the bar was still stuck at 30%. I did a hard boot a little bit ago and waited a few seconds. I restarted an it booted up fine.
Larry

Column not displaying after added by personalization in Advance table

Similar Messages

Maybe you are looking for