Column's Right Alignment goes out with CR in format Mask like NNN,NN0.00CR

I am working in Reports 6i. For a numeric calculated column, I give format mask NNNN,NNN,NNN,NN0.00CR. Due to CR, right alignment of the column goes out. That is rows for which CR is NOT printer are also aligned at right. A blank space should be left at the end of every row when no CR is printer. In this way numeric data is right aligned and readability is not disturbed.
Pl. help.
Thanks in anticipation.
Muhammad,
I tried this on 6.0.8.14.2 version of Reports 6i and it aligned properly (i.e., spaces where present for those values without CR). I originally had the Arial font which as you know is not a fixed font and in this case, the spacing was not exact. I switched to Courier and the output was much more readable for the numeric values, especially with the spacing.
Regards,
Jim Safcik
Thanks Jim Safcik. I changed the font of that column to Courier and it resolved the problem. But I am using Times New Roman font which creates above alignment problem.
It would be nice if we have an other solution which is NOT font dependent.
However I appreciate your guidance and knowledge.
Pl. guide.
Thanks.

Similar Messages

Sound Blaster Audigy 2NX: Right Channel Goes out Intermitten

In tears trying to figure this on out. My right channel goes out fairly regularly. For example, the sound will work great for a while and sound just awesome. I leave my desk overnight and when I come back, only the left channel produces sound. I?ve double checked all the balances (winamp, Creative, Windows) and they are all balanced. Besides, the right channel will come back on its on from time to time as well.
Before you all assume it'ss the speakers, I?ve tested this with a different pair of speakers and found the same. Also, if the channel is out, I can always get it to come back by switching to the primary laptop driver, playing a song for awhile and then switching back to the NX driver.
I?ve reinstalled the drivers (cleanly), updates the bios, downloaded DirectX and uploaded the firmware and drivers off of the Creative auto-update site. It seems something?s wrong with the drivers, but I can't figure what.

Has anyone else seen this problem or have any suggestions. Again, I?ve done a complete uninstall of the SB drivers and reinstall twice now.
I am running a pair of Cambridge Soundworks 2. speakers off of the external SB Audigy 2NX out of a Toshiba Tecra. I have a Pentium M 700 process or and 52 RAM.

Thanks all,
Scott

GRe: Sound Blaster Audigy SE -> Right/Left Rear + Middle box Problem. Hi Jossie,
The music that you play from internet or music cds are stereo sources. To get 5. surround from your music, please enable CMSS.

Table numbers in a column to Right alignment

Hi All,
I have a table like the below.
Age (Years)
1985
1998
2007
1–4
52
35
29
5–14
26
20
15
15–24
102
82
80
25–44
167
161
144
45–64
875
680
661
65–74
2,848
2,495
2,059
75–84
6,399
5,703
5,164
Over 85
15,224
15,111
12,947
I want to decimal align the 2nd,3rd,4th column using javascript.
Paginators are manullay using tab stops and adjusting the "Align to Decimal Tab"
But I want to do it in javascript
Help me...

Hi, Maheshwara:
Your question's a bit confusing, because your example does not show any decimal points! Perhaps it would be good for you to show a screenshot from InDesign with Hidden Characters enabled and the Tab ruler visible so we can see what is going on.
What do you want to do, though? My guess is you want to right-align the text, then go through and find the entry with the most characters to the right of a decimal point and set a decimal tab based on that entry, and apply it to the entire column. Sounds pretty easy!
Are you stuck? What's the problem? How far have you gotten? Do you know Javascript?

My mail goes out with wrong (my wife's) email address

My email (I use Apple Mail via gmail.com) goes out and may indicate to the recipient that it is from my wife’s account at gmail.com. She once used my Macbook for email, but now uses her own Macbook. She is not listed as a User on my Macbook Pro. I have eliminated her account from Internet Accounts in System Preferences. I have eliminated her account from Mail Preferences, via the Accounts tab. I have eliminated her links to gmail in Keychain access. I still may have a recipient of my email receive mistakenly her email address as the sender. I do not see any references to her email in My User Library Preferences folder. In Mail Preferences, Composing Tab, my email address is listed as the one to send emails from. Any help is much appreciated.

Go into Mail's Accounts preference pane and delete the Gmail account that's there. Next add your Gmail account back with your ID and password for the account.

Right channel goes out

My right channel keeps going dead. Three different headsets. When I push the top of the headphone plug to one side, it comes back on. Is it worth taking the back off to see how I might fix it?

As you already know the issue is with the headphone jack in your iPod Classic. You can try inserting something thin into the jack and remove any debris in there that may be causing a bad connection. If that does not solve it then it may require a new headphone jack.
To give you an idea of what it takes to open and install a headphone jack in an iPod Classic, [*_Please click here_*|http://www.ifixit.com/Guide/Repair/Installing-iPod-Classic-Headphone-Jac k-Hold-Switch/562/1].
Axel F.

Once more on right-aligning footnote numbers with GREP

For some jobs I want the footnote numbers in the notes to align on the period that I have IDCS4's Footnote Options add (along with an en-space) as the Separator between the note number and the text of the note. No big deal if I define the footnote paragraph style with an "Align to Decimal" tab and then insert that tab at the start of the note. I recently bumped into this thread from 2009 where RodneyA described this in more detail, and Eugene Tyson added a GREP search to automate adding the tab: replace (~F) with \t$1.
I cannot get this to work in IDCS4. Did it work in earlier versions? Earlier this year Jongware explained that GREP cannot replace a footnote marker, only look ahead or behind the marker to replace whatever. Unfortunately, in my footnotes there's nothing ahead of the footnote marker for GREP to replace until I manually put my tab there. Adding those tabs to hundreds of notes by hand isn't so bad (jumping with Ctrl + arrow keys), and ID's propensity for occasionally eating a note means I need to check them all anyway. But am I wrong in thinking that if I want to automate adding the tabs I'll need to do so via JSX?
Thanks,
David

David, when stating you cannot get something to work it's important you also tell why
But when I tried your "replace (~F) with \t$1" for myself it became real obvious straight away: the code ~F does not only indicate "the footnote reference number" but also the footnote itself in the text. So, while it works in the sense that you get a tab before the footnote number code, you get loads of extra tabs in your text as a bonus.
There are several ways to circumvent this. The most obvious is to limit the replace operation to just the paragraphs styled with your footnote style. If that's a unique one (mine usually is), it'll work straight away. That's Eugene's first answer in the previous thread -- possiblly you forgot to set this Paragraph style in the Find Format field.
Another way is to only add a tab when the footnote number code is at the start of a line:
^~F
replace with
\t$0
(You are correct in noticing the "lookbehind" trick cannot be reversed to a lookahead for just 'start of line followed by the footnote number code'. It's a Limitation of InDesign's particular flavor of GREP.)
This one may fail if you ever have a footnote at the start of a paragraph
Yet another way is to try to make use of the vertical position of the footnote number code. If your references are in superscript (which is fairly regular) and the numbers in the notes themselves are not (which they may or may not be), you can look for
~F (+ position: normal)
and replace with itself plus a tab before, as above. (A variant could be to use a character style for the superscripted references and look for [None] character style to pick up the ones inside the footnotes.)

HT5624 I have two mail accounts and one Icloud account. Thproblem is mail is going out with the incorrect sent from address. I deleted the mail accounts and added just one account back and mail still goes out with the incorrect from address and people res

My phone will not5 send from the correct address tht I want my mail sent from. Although my mail goes into the correct mail accout answeres leave with the incorrect sent from address.
I want to be able to send mail corectly.

In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account. The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
Ernie

HT1766 my email has been compromised by a worm, can my ipad be infected. I do not use a computer only the tablet. My aol account is the email address that is going out with the evil emails. Help.Please....

Hi, my Ipad 2 address book has been compromised by a worm....sending out weird messages using my aol account. Any ideas how to get rid of this?

My email was hacked twice in March.
The only way to avoid the problem is to add two step verification on your email accounts.
It's a pain to set up, but it prevents anyone from signing in to your account on another device you don't authorize.
This is not an iPad virus, it is an email hack....

My account picture goes out with each E-mail

I just started using Mail 3.3. Each E-mail that I send includes my account picture (a baseball). Is there any way to delete this feature?
Many thanks.
grenstne

That picture does not go anywhere other than your screen. You're safe.

Re: Why am I having trouble on my sign out with the Itunes store tab (like it stays highlighted) and it will not close out either?

I also have this same question listed under: the Itunes Store category. There are bit more details listed for the question as above. Please help.

You question would probably best appear in iTunes for Windows (you have a PC right?)
https://discussions.apple.com/community/itunes/itunes_for_windows
I suggest reposting there, with a detailed description of what you did, and what messages appeared, etc.

Need Amount column to be Right Aligned in LOV asap

Hi,
I have a amount column in a custom LOV which needs to be right aligned. but in LOV, by default all columns come as left aligned..Pls provide a solution asap.
Thanks,
Puneet

The column alignment depends on the type of data it displaying. Number columns are right aligned and string column are left aligned. this is default behaviour.
Change datatype of column amount to Number. It will allign right.
Thanks,
Ram

How can I right-align a table header?

Does anyone know a way to right-align a table header?
For example, in the table below I want the word 'Price' to be right-aligned. I could set the table's 'header renderer' to be a right-aligned DefaultTableCellRenderer, but then the header would look like a cell, not a header. Why can't swing be simple, like table.getColumn(1).setAlignment(Column.RIGHT) ????
public class TestTableHeader {
     public static void main(String[] args) throws Exception {
          JFrame frame = new JFrame("Test");
          Object[][] rowData = new Object[][] { { "General Electric", "$100.60" },
                    { "IBM", "$5.20" }, { "Wal-mart", "$17.00" } };
          JTable table = new JTable(rowData, new Object[] { "Name", "Price" });
          DefaultTableCellRenderer renderer = new DefaultTableCellRenderer();
          renderer.setHorizontalAlignment(DefaultTableCellRenderer.RIGHT);
          table.getColumnModel().getColumn(1).setCellRenderer(renderer);
          frame.getContentPane().add(new JScrollPane(table));
          frame.setSize(400, 300);
          frame.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
          frame.setVisible(true);
}

I modified your code an came up with a solution to the problem.
import java.awt.Component;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.table.DefaultTableCellRenderer;
public class TestTableHeader {
     public static void main(String[] args) throws Exception {
          JFrame frame = new JFrame("Test");
          Object[][] rowData = new Object[][] {
                    { "General Electric", "$100.60" }, { "IBM", "$5.20" },
                    { "Wal-mart", "$17.00" } };
          JTable table = new JTable(rowData, new Object[] { "Name", "Price" });
          RightAlignRender right = new TestTableHeader().new RightAlignRender();
          table.getColumnModel().getColumn(0).setHeaderRenderer(right);
          table.getColumnModel().getColumn(1).setHeaderRenderer(right);
          frame.getContentPane().add(new JScrollPane(table));
          frame.setSize(400, 300);
          frame.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
          frame.setVisible(true);
     public class RightAlignRender extends DefaultTableCellRenderer {
          public Component getTableCellRendererComponent(JTable table,
                    Object arg1, boolean arg2, boolean arg3, int arg4, int column) {
               Component toReturn = table.getTableHeader().getDefaultRenderer().getTableCellRendererComponent(table,
                         arg1, arg2, arg3, arg4, column);
               switch (column) {
               case 0:
                    ((JLabel) toReturn).setHorizontalAlignment(DefaultTableCellRenderer.CENTER);
                    break;
               case 1:
                    ((JLabel) toReturn).setHorizontalAlignment(DefaultTableCellRenderer.RIGHT);
                    break;
               return toReturn;
}

Video card going out?

i get bars of pixels going across my screen most of the time. They are sometimes black and other times they are multi-colored. Also when i scroll down a page, some times it does this funky thing where it looks like....man i cant really describe it..... i cant get a screen capture of it because it goes away when i click outside of the window
Also, if they are in a window, they will move with that window.
Could this be happening because of the video card going out?
The lines look just like this: http://farm4.static.flickr.com/3243/25990075431695b18555b.jpg
Message was edited by: Derek Collier

Hi
Actually I noticed it first on the upgrade screen from Tiger to Leopard, and it then became progressively worse, even before 10.5.2.
Since increasing fan speed seems to help I don't believe it's a software issue, although software can play a part in stressing (or de-stressing) the video card. If the fans work for you and your iMac is out of warranty you might just have to live with it. The cost of repair for a video card/logic board (from what I'm told) is not worth contemplating.
Also, as a photographer I'm not planning to upgrade to the new iMac because of the gloss screen. With any luck the next generation of iMac will have a choice between gloss and matte.
Cheers,
GLi
Message was edited by: GLiMAC

How do I right align the component af:navigationPane?

First I should say that I use Jdeveloper Studio Edition Version 11.1.1.0.1.
I have a template that in one place in the template contain these components
<afh:cellFormat halign="right">
<af:navigationPane>
<af:commandNavigationItem/>
<af:commandNavigationItem/>
<af:commandNavigationItem/>
<af:commandNavigationItem/>
</af:navigationPane>
</afh:cellFormat>
I want to right align the cellformat and navigationPane which has the hint property set to bar. I have tried to set the Halign property of the cellFormat to right and if I have an outputText inside the cellformat it gets right aligned so I guess that works but I cant get the commandNavigationItems to right align inside the navigationPane. I have tried to set the the text-align:right; in the navigationPane but that doesn´t work. The only thing that seems to work is to set the width of the last cellformat but since the width of one of the commandNavigationItems varies it isnt a good solution either. Can´t right alignment be done with a navigationPane? Should I choose some other component instead? In case I could use another component instead, which component has similar functionality and can be right aligned?
Atlantic Viking
Edited by: Atlantic Viking on Feb 3, 2009 7:22 AM

Hi,
I have tried the sample for this :
<af:panelGroupLayout id="pgl41" layout="horizontal" halign="right">
<af:navigationPane id="np1" hint="tabs">
<af:commandNavigationItem id="cn1" text="Test1"/>
<af:commandNavigationItem id="cn2" text="Test2"/>
<af:commandNavigationItem id="cn3" text="Test3"/>
<af:commandNavigationItem id="cn4" text="Test4"/>
</af:navigationPane>
</af:panelGroupLayout>
It works fine.
Is it af:navigationPage(new tag) or af:navigationPane.

Right Alignment In Script

Hello all
I am working with Script
where i want output of certain field as right aligned.
but problem is that my output appears like
123.00
111.00-
whenever negative sign appears the alignment get changes,if there is any function module to take the
negative sign in the starting of the figure?
Please help me regarding the same.
Thnaks in advance.
Jaideep.

Hi
This is the FM you are looking for: CLOI_PUT_SIGN_IN_FRONT.
You can put the negative sign in the front.
P.S: please search once before posting a questin.
Vishwa.

Column's Right Alignment goes out with CR in format Mask like NNN,NN0.00CR

Similar Messages

Maybe you are looking for