Column Text in Tree

How to change the column text in a tree? when the column length is very small, it should show the Heading from the Data Element.As the column length increases, column header should be Short Label,Medium Label,and long field label??

Hi Nikhil,
   Which class are you using to create the tree?
what i feel is when you change the column length at the same time you can update the internal table which you are passing for tree display with the field labels.
and then call the refresh tree method.
i dont think there is a direct method of doing the same where in the text gets auto updated, this happens only in case of screen elements.
Hope this helps.
regards,
kinshuk

Similar Messages

  • How do I read text from specific rows and columns in a tree structure?

    How do I read text from specific rows and columns in a tree structure? In a table you can specify the cell to read from but I have not been able to figure out how to do this with a tree structure.

    You need to set two properties to activate the correct cell and then you can read it's string property.
    The positioning properties are the "ActiveItemTag" and
    "ActiveColNum" properties. With them you select the tree item by it's tag and the active column. The string can then be read from the "Cell String" property.
    MTO

  • How to Change Column text of Iview HCM Process Overview

    ECC Ehp4 sps7
    Portal 7.01 sps7
    Please Help,
    I am trying to globally personalize the Copy of the Iview HCM Process Overview . The column texts have titles such as Object Type and Object Key. I want to rename them Person ID etc.
    I was able to "Hide" some columns in the Iview but when I change the text in the "Settings for Current Configuration" it does not Appy or change the Display.
    I am in the Portal Content Administrator, with Admin priveledges. I am opening the Iview objecyt then using Preview.
    I then Right cntl click to bring up the Settings for Current Configuration. I am looking at the View UI Element Tree and opening the Grouping of UI Elements. I see the text for the column "Object  Key" I change the text but when I save it does not change the Iview text. When I open the "Settings for Current Configuration again the changed text is still there but the Iview has not changed
    Any help on this matter would be appreciated.
    thank you,
    Sarah

    Yes,
    I have opened the Role object, edited the Work Overview Page inside the role, selected / clicked on the Iview HCM Process Overview, opened the IView  HCM Process Overview, previewed it, cntl right click for Settings for current configuration,
    Selected the UI Element "Object Type" TEXT and made my changes
    Sarah

  • ID CS3 - text wrap doesn't work at the end of a long multi-columned text frame

    Did a search - don't think this specific issue has been addressed:
    We design large graphics often used on walls. When working with a text frame that that was 11 feet long and had 8 columns, text wrap would not work on an image placed in the last column. The same image with the same text wrap applied will work fine anywhere else in the text frame. I found that if I shortened the width of the text frame a little bit at a time eventually it would work, but there doesn't seem to be a specific cut-off width - sometimes the last column won't text wrap when the frame is 115 inches wide and sometimes it doesn't work when the frame is only 80 inches wide. Again, all of the other columns work fine. I have tried all of the obvious stuff, the only variable between the columns that wrap and the one that doesn't is it's position at the end of the text frame.
    We have gotten around this issue by using multiple threaded frames instead of one long frame with multiple columns, but I am curious if anyone else has run into this or might know what the issue is.
    thanks

    Did a search - don't think this specific issue has been addressed:
    We design large graphics often used on walls. When working with a text frame that that was 11 feet long and had 8 columns, text wrap would not work on an image placed in the last column. The same image with the same text wrap applied will work fine anywhere else in the text frame. I found that if I shortened the width of the text frame a little bit at a time eventually it would work, but there doesn't seem to be a specific cut-off width - sometimes the last column won't text wrap when the frame is 115 inches wide and sometimes it doesn't work when the frame is only 80 inches wide. Again, all of the other columns work fine. I have tried all of the obvious stuff, the only variable between the columns that wrap and the one that doesn't is it's position at the end of the text frame.
    We have gotten around this issue by using multiple threaded frames instead of one long frame with multiple columns, but I am curious if anyone else has run into this or might know what the issue is.
    thanks

  • Two-column text

    This is driving me nuts. It's not that often that I import text into InDesign. I've got two column page formats set up for an index. I'm placing the index text, which is an RTF file, into this two-column format. And, it just boringly splats itself right across the whole page, damn the two columns. What's this about? Why can't imported text adhere to the columns that are set up?
    Thanks,
    Peter

    Yeh, I fixed it, finally. Yes, I had to click, click, click in the text frame and make sure I saw a blinking cursor in there. I actually typed in some text and verified that it was wrapping in the first column, not spanning. Then, I placed my file. And, it finally came in right. I guess you just have to be totally sure that your cursor's there in the 2-column textbox. Sometimes when I brought in the text, it literally create another single-column text frame, on top of the two-column one!
    Thanks, everyone.

  • Columns & Text Flow Query

    My document set-up is two columns. I want to insert images with captions in the left column and text-only in the right column.
    I would like to have right column text contain itself within the right column. Ditto for the left column. I do not want continuous right column text to flow into the top of the left column on the next page.
    I have tried many things but nothing works. If I set up with a narrow right column, I can get the images in but cannot type any text. I am sure that I do have to have two columns but I want them separate from each other.
    Any help would be greatly appreciated.
    Phillip
    17 PowerBook, 1.33 Ghz   Mac OS X (10.3.9)  

    Dennis,
    Sorry I'm late on this. Thought I would get an e-mail notice of your post. Guess that is what 'Subscribe' is about.
    Yes, I checked out the Pages Help and was good to go. I do not, however, seem to get the new, continuous box to work thus far. I am assuming, correctly or incorrectly, that the text will flow into the 'linked' text box which will be on a new page. So, I so have to sit down for an hour or so and figure this out. Most of what I am inserting into the text boxes is already written. Anyway, thanks or all of your help. Very nice of you to take your time on this.
    OK! Back to the Seahawks. They must, and I mean MUST beat the Panthers. Their coach, in my opinion, is the essence of arrogance. I don't mind the best team winning, after all , that is what it's all about, but he just seems to relish the other teams loss. They destroyed the Chicago Bears, but I never believed that the Bears were intense enough to be a real contender.
    I may be from Chicago, but my heart was with the Patriots to take it all. If their ball carrier's could have concentrated on doing what they were supposed to do - catch and then hold on to the ball - they could have made a game of it. However, I was born in New Mexico, so the Bronco's are okay as well. That's the problem when you like too many teams. I like the Seahawk coach because I like Green Bay and he did an awesome job while he was there. I know, I should get a job as a sports announcer. Ok! Enough of this.
    Thanks again, and I'll be rooting for the Seahawks this Sunday. And the Bronco's.
    Regards,
    Phillip
    17 PowerBook, 1.33 Ghz   Mac OS X (10.3.9)  

  • Creating a two columns text reflow

    Hi
    I'm trying to create a two column page which needs to get data that will fill the columns. Upon filling one column, the text will need to reflow to the next one (as much as a two column text frame in a layout program does).
    Is it possible in a Designer ES? (version 8.2.1.5161.1.566259) What is the best practice to do so?
    Thanks,
    Yossi Maoz

    Are you trying to make it an interactive form or are you going to merge data onto the template and make a print form? In either case I modified your sample. The root Page subform must be set to flowed. You do not need a field in the second content area. I resized the 1st field to make it easier. I changed the layout to allow the field to expand in the Y direction (on the layout tab). I cahnged the Form Properties/Preview to Interactive so that I coudl enter in data. Now when the field fills up scroll bars will appear and when you tab off of the field the field will be redrawn to its actual size. Enter in enough data to case a page overflow and you will see the second column fill up.
    Paul

  • How can a 2 column text frame be split into 2 separate text frames?

    Hi InDesigners,
    I have a 12 spread (22 page) document that was originally created with a single column primary text frame in CS6. It contains text and anchored images throughout the doc. (images are anchored to the text frame).
    My client now wants each page split into 2 columns, but the columns need to have different widths - the left column needs to be narrower than the right. Although I can create 2 columns in a single frame, it's not possible to adjust the column widths separately, so I need to get them into 2 separate frames.
    Is there a way to convert a 2 column text frame into 2 separate text frames, so I can resize the column widths invididually?
    kind regards,
    -c

    hi, Thanks for the replies,
    The doc size is 8.5"x11", with 1/2 " margins. I never mentioned anything about it being a book. (It's just a paper my client wrote and woud like a PDF of it). The reason for the uneven columns is he wants the images to be 4" wide. For some reason, he wasn't keen on just a single column with text wrapped around the pix. I proposed making a 3" left column threaded into a 4" right col with a .5" gutter between them and he wants it that way.
    Thank you both for your respones. I'll try the script
    -c

  • How to make a 2-column text in sapscript via standard text?

    Hello ABAP Gurus! I'm having a hard time thinking on how I'm going to display a two-column text in the MAIN window of the form Using Form Painter(se71) and Standard Text (SO10). Let's put it this way, the scenario is like you are formatting a paragraph on MS word in to two columns by Format > Columns > Two. What am I going to do  with this similar situation in SAP? Any help will be highly appreciated. Thanks

    This is nothing with standard text.
    Call READ_TEXT FM and here use two variables ,read first line and move to first variable ,again read second line and move to second variable.
    Thanks
    Seshu

  • Horizontal paragraph rule across two-column text frame?

    Hi,
    as the title suggests, how do i get a horizontal rule to run across a two-column text frame?
    I have either had the rule just apply to the entered text; had a gap where the column gutter is;
    or I have had to set the column gutter to 0mm/px and manually set carriage returns to give the impression of a gutter.
    Surely there is a better way?
    I'll attach a jpeg of my various options.
    Hope I've been clear-enough. All help is appreciated.
    Cheers, Matt

    You can put the rule in a paragraph which is spanning a columns.
    Or you can extend the paragraph rules by inputing minus values to left and right (e.g. -5mm)
    Or you can use a table instead.
    Or you can use negative left and right intend for the text but extend the rule to the end of the frame.
    Never set a carriage return manually.

  • Importing two-column text from Pages

    I've produced several successful calendars and books using the iPhoto service in the past couple of years, but one thing has me defeated.
    So far, I have used Pages to create text, then style it the way I want, and finally cut and paste it into the book project. It works perfectly. So far, so good.
    Now I want to do two-column text pages, instead of a full-width single-column layout, but I can't find a way to do it.
    I have tried exporting the two-column set out of Pages as a pdf, then using the Import command in iPhoto, but it is greyed out in the navigation window. No go.
    Any ideas?

    Do a Print to PDF of the Pages layout and select the Send PDF to iPhoto option. That will create a jpg image of the page which can be added to a full page layout in the Book. Here are a couple of crude examples of that from a Word document: Portrait oriented - Landscape oriented.
    Of course my example is single column but with a two column layout in Pages and in the landscape mode it would work just as well.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.
    Message was edited by: Old Toad

  • Place in the center the column texts

    Hi BW knowledge broadcasters,
    I am looking for the method to place in the center the column texts. It seems it could be in the css implemented in the WAD web template. But I don't know neither for the queries built directly with the Query Designer.
    Thanks in advance.
    Geo

    One problem you will encounter is that the column headers and the rows have the same class associated to them and if you set this to center, your rows will also be centered.  You will need to either use the Table API to change the class of just the column headers or possibly with javascript.  To find the class, run the query in the web, right-click and select view source, search for the text in the columns and find the associated class referenced in the HTML. 
    Here is a link to all of the styles in the standard BWReports.css:
    <a href="http://help.sap.com/saphelp_bw33/helpdata/en/3f/ca453afbf37b54e10000000a11402f/content.htm">http://help.sap.com/saphelp_bw33/helpdata/en/3f/ca453afbf37b54e10000000a11402f/content.htm</a>
    This is specific to BW 3.x.  In 2004s, the styles are now driven from the Portal theme. 
    Thanks,
    Jeff

  • Troubles when trying to transfer a table with hierarchical column to a tree

    In WD for ABAP, I encounter many troubles when trying to transfer a table with hierarchical column to an actual tree. In my UI, the tree is in the left pane and the detail for a node is in the right.
    1. With hierarchical table, I can bind the dataSource of the table directly to the context node in View which is mapped to a context node in component controller which is a DDIC structure. But with a tree, is it possible to map the dataSource of the tree or node in tree to context node in component controller?
    2. With hierarchical table, when lead selection changed, the detail info in the right pane will change automatically. But with a tree, it seems to have to be implemented via action by myself.
    Can anyone give some suggestions to overcome these troubles?

    Wei,
    <i>With tree table, the dataSource of the table is just bound to the context node ORG_UNIT</i>
    Hmmm... You said, that this node resides in component controller, not in view controller. Or does it?
    Any recursive node that can be displayed with tree table can be displayed with tree as well. Period.
    1. Create tree and bind data source to the same node as table data source.
    2. Create tree node type and bind it to the same node again.
    3. Create one additional calculated attribute in forementioned node (type boolean) that inverts/negates attribute for table column "hasChildren" to tree node "isLeaf".
    4. That's all.
    VS

  • Tree columns autofit in Tree

    Hello Everyone,
            I need to adjust my columns in a tree such that, all the unused columns (which has empty header strings and they are present only at the end) should be deleted and that, the columns should exactly fit my tree. How can I implement this?
    Thanks,
    Vasanth.
    Ya Ya

    I don't mean to barge in, but here's a little bit of code that will autosize the columns without resizing the whole table. Also, you can't really delete columns, hiding them is what you want. The actual value that you'll read from the tree is just the tag from the first column, so any subsequent columns will only display what you put in them.
    Message Edited by Marc A on 01-05-2007 09:28 AM
    Attachments:
    autosizecols.PNG ‏5 KB

  • How to set Tool Tip Text to Tree Node?

    Hi,
    How to set Tool Tip Text to Tree Node in JTree?
    Pls somebody help me to solve it.

    bsampeieri,
    Been here a long time myself. I don't agree with the one post is enough per se. That is to say, sometimes, it helps to post in several groups so that more eyes may see it. A number of forum posters linger in specific forum topics and may not see the post in another forum.
    Now, if in the previous post you/others answered the question and then the OP posted here later, I could see the complaint.
    For the OP, the better way to cross-post is to have one "main" post, then have all the other posts refer back to that one (link to it) so that people aren't duplicating the effort to answer your question(s). A simple "I have cross-posted this to get more eyes on it. Please reply to this question at this post <link here>"

Maybe you are looking for