Column text to flow across more than one page in same column

I am trying to write a document of several pages with three, or maybe even four columns. There will be text headers in one column, alongside which there will be the main text associated with the headers. In another column there will some more key phrases, and again these will need to be lined up against particular text in the first two columns.
I would like to make the text in one column stay in that single column across the whole document, and not flow into the next column on the particular page. I know that using a succession of text boxes is one solution, but it is clumsy and is also difficult to manage. Perhaps another solution would be to use a table, but again that feels clumsy.
Can anyone advise on the best way to do this please.

Hi everyone and thanks for your help. I tried to explain more clearly than I seem to have done. Walt has understood that I want the text in column one, page one, to flow to column one, page two; and the text from column two, page one, to flow to column two, page two, etc. I thought it might have to be text boxes. I now need to learn about how to 'link' them, and whether it is across or down the page I need to create the links.
The document is an aide memoire or manual for a trainer to use. It has the media to be used in one column, the visual aid in the next column and the notes in column three. I might also include a fourth column to show essential or key questions etc that have to be used.
Thanks again everyone.

Similar Messages

How do I get the text to flow throughout more then one page.

Hello,
I am currently using LiveCycke Designer to create a scholarship for my company. I created fields for the form and I would like to insert a text to describe the scholarship. When I insert the text, it doesn't flow onto the next page. I've tried creating a subform and clicking "flowed" and "allow page breaks within content". I also clicked auto-fit for the height, but it just makes a line. For the text box, I've clicked "Expand to fit on the height". It is also a dynamic XML Form. Is there anything else I should be doing?
I could always send the file to someone to see if they can figure it out.
Thank you,
Natalie

Thank you so much !
but the link doesn't seem to work. It says that the URL is not in the correct format for an Acrobat.com document link.
Natalie
Date: Wed, 12 May 2010 07:53:12 -0600
From: [email protected]
To: [email protected]
Subject: How do I get the text to flow throughout more then one page.
Here is the corrected form..Even you you set the Subform type to "Flowed" to the subform where the Text box resides, you did not set the Page1 to Flowed (which is the key)..But when I make the Page1 type to "Flowed", all your fields above the Scholrship text boxes' Subform will go one below another.. To fix this, first I have select all the fields and wrap them into a subform and then set the Page1 to Flowed..
https://acrobat.com/#d=XQ1yfV8fCk85M7sRLD*-gg
Thanks
Srini
>

TableView - Filter more than one value in same column

Hi folks,
I faced a problem on filtering a field more than one value.
Does it possible solution for us to bring out filtering function while user try to enter few values in the SAME filter field?
Thank you.
First, i need to clarify my exact problem.
--> I have created one tableView with filter = "server". Then i want to allow my user to enter few filter values in same field column.
Example 1:
Before
COL1 COL2 COL3 COL4
l--II--
l-filter1I--I--
*filter1 = AAA, BBB
AAA AAA AAA AAA
BBB BBB BBB BBB
CCC CCC CCC CCC
DDD DDD DDD DDD
EEE EEE EEE EEE
After
COL1 COL2 COL3 COL4
l--II--
l-filter1I--I--
*filter1 = AAA, BBB
AAA AAA AAA AAA
BBB BBB BBB BBB
Is that any good suggestions to solve my doubt?
Message was edited by:
 GP Poh

check out this work around. in this sample currency column supports multiple values and multiple values in the filter column should be enter with comma as separater.
page attribute:
filtertab TYPE RSELOPTION
filter_wa TYPE RSDSSELOPT
itab TYPE FLIGHTTAB
layout
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content design="design2003" >
<htmlb:page title=" " >
 <htmlb:form>
 <htmlb:textView id ="tex"
 text = "Filter on Currency Column support multiple values, they can be entered with comma as separater like 'usd,DEM'"/>
 <htmlb:tableView id = "tv1"
 design = "ALTERNATING"
 table = "<%= itab %>"
 filter = "APPLICATION"
 columnHeaderVisible = "true"
 sort = "SERVER" />
 </htmlb:form>
</htmlb:page>
</htmlb:content>
oninitialization
select * from sflight into table itab where currency in filtertab .
oninputprocessing
* event handler for checking and processing user input and
* for defining navigation
DATA: table TYPE REF TO cl_htmlb_tableview .
DATA: tv_data TYPE REF TO cl_htmlb_event_tableview.
DATA: filter_value TYPE string .
DATA: fil_val TYPE STANDARD TABLE OF string ,
 fil_val_wa TYPE string .
REFRESH filtertab .
table ?= cl_htmlb_manager=>get_data( request = request
 name = 'tableView'
 id = 'tv1' ).
IF table IS NOT INITIAL .
tv_data = table->data .
IF NOT tv_data IS INITIAL .
 CALL METHOD tv_data->get_row_filter_value
 EXPORTING
 column_index = 6
 RECEIVING
 value = filter_value.
 IF NOT filter_value IS INITIAL .
 TRANSLATE filter_value TO UPPER CASE .
 REFRESH fil_val .
 SPLIT filter_value AT ',' INTO TABLE fil_val .
 CLEAR fil_val_wa .
 LOOP AT fil_val INTO fil_val_wa .
 filter_wa-sign = 'I' .
 filter_wa-option = 'EQ' .
 filter_wa-low = fil_val_wa .
 APPEND filter_wa TO filtertab .
 ENDLOOP .
 ELSE .
 REFRESH filtertab .
 ENDIF .
ENDIF .
ENDIF .
Regards
Raja

How to have more than one condition on same column --- using SQL Loader

Hi All,
I am stuck with SQL Loader..
How do I filter records before loading in the table using when clause..
i should load data only when
field1 = 'AC' or 'VC'
field2 is NULL
i used various combinations in when clause like
a) when field1='AC' or field1='VC' and field2 = BLANKS
b) when (field1='AC') and (field2 = BLANKS )
& similar...
In all the cases I tried I could not implement OR condition with field1 and null condition with field2
but my main concern is can we use OR or IS NULL things in when clause of SQL Loader..
is it possible to check this anywhere??
any alternate solution u could suggest??
Thanks
Dikshit

Ok I'll try that, although I did try it earlier when I had iTunes 5.xx loaded, I think.
As to size of playlists, I have a master (900 songs) that defines what will fit onto the ipod , I then generate all the others as subsets of the master (not of the library)- hence I know they will all fit
Can you also clarify something for me: the dialogue box we are discussing is intended, I think, so that one can set the automatic synching of certain playlists between the PC & the ipod. Is that the only way one can select other playlists to go to the ipod - i.e. as static once-offs, not synchronised ?
Apple' docs, I think, are poor in this regard - they assume most ipods are bigger then the users song library and they gloss over the details of this alternate mode of playlist synching.
Thanks - Nick

Can I split a spreadsheet table over more than one page?

Is is possible to split a table so that data can be linked from page to page?
I would like to have a table with formulas on page 2 referencing data from another linked table on page 1 of a Pages document.
I know this used to be possible in Appleworks. In fact I have some old Appleworks docs like this, but when I try to open them in Pages they get scrambled. Any ideas anybody?

Thank you both for your help. It sounds as though the answer is "No, this can't be done"
Neither of the 2 options suggested quite fit the bill as my document is a text document report with embedded tables, which do need to refer to each other across more than one page, but still needs to be well laid out for printing and easy reading by others. It seems strange that something which was easy to achieve in Appleworks should be impossible in iWorks, since I thought this was meant to be the replacement program after Apple stopped developing Appleworks.

More than one index for a column.

Hi,
I am trying to create more than one index for a particular column of the table.But oracle does not allow more than one index for a column.
I just want to make sure whether we can add more than one index for a column
and if yes what are the scenarios.
Because as far as i know some database allows more than one index for a single column.

You cannot create more than one index for the same column(s).This is not so true Nicolas. Look at following example:
SQL> create index idx_mytest_id on mytest(id);
Index created.
SQL> create index idx_mytest_id_desc on mytest(id desc);
Index created.
SQL> create index idx_fbi_mytest_id_upper on mytest(upper(id));
Index created.
SQL> create index idx_fbi_mytest_id_upper_desc on mytest(upper(id) desc);
Index created.
SQL> create index idx_fbi_mytest_id_lower_id on mytest(lower(id));
Index created.
SQL> create index idx_fbi_mytest_id_lower_id_dsc on mytest(lower(id) desc);
Index created.
SQL> create index idx_fbi_mytest_id_tr_up on mytest(trunc(upper(id)));
Index created.
-- I can still continue but for this example this will be enough
SQL> select index_name from dba_indexes where table_name = 'MYTEST';
INDEX_NAME
IDX_MYTEST_ID
IDX_FBI_MYTEST_ID_UPPER
IDX_MYTEST_ID_DESC
IDX_FBI_MYTEST_ID_UPPER_DESC
IDX_FBI_MYTEST_ID_LOWER_ID
IDX_FBI_MYTEST_ID_LOWER_ID_DSC
IDX_FBI_MYTEST_ID_TR_UP
7 rows selected.You can see 7 indexes for one column (ID) and I could still continue...
So according this test we can say you can't create more than one index for one column (or the same group of columns in case of composite index) with same condition(s).
Message was edited by:
Ivan Kartik
Or simplified: you can't create the same index for same column(s) twice :-)

Can i run the free version of Adobe Acrobat DC across more than one of my laptops during this test run

Can i run the free version of Adobe Acrobat DC across more than one of my laptops during this test run

You mean the trial version? Yes, you can run it on as many devices you want. Each device will have its own 30-day trial limit.

Why can't I paste more than one page at a time?

I have a problem with Pages when I try to paste more than one page worth of content at one time.
In my business I have a form online for clients to fill out. When the clients have finished the form, I copy the form (saved either as a safari document or as a pdf) and then try to paste what I have into Pages. It should flow to fill out four pages, but for some odd reason it only fill the first page of a Pages document, then it gives me a second blank (empty) page. So the document is two pages long, but only the first page has content.
I know the pasted information is hidden in the document, because if I were to cut (erase) a few lines of content, the pasted information would appear from the bottom of the page to fill the space I just made.
Why is Pages not making a four page document containing all my pasted information? Why isn't it flowing to fill out as many pages as it takes to show all the information?

Michele Stapleton wrote:
I think using Numbers is too complicated because what I want essentially is a text document I can alter. I take the information they put into my form and repurpose it in a way I find more useful while performing the job. So, I want to be able to take their typed information and move it around. And add some more of my own.
You may perfectly "their typed information and move it around" in Numbers which behave as the AppleWorks Draw environment.
Here is the second page in the document which I posted before.
As you may see, the standard Word Processor features are at work:
Spell Checker
Selection…
I exported my AppleWorks documents in Numbers ones.
And of course, with the Numbers document open, you may copy pieces of it and paste them in Pages's pages.
Yvan KOENIG (VALLAURIS, France) jeudi 16 juin 2011 16:44:30
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Cannot work on more than one page and menu shifting problems

I downloaded Muse CC 2014 when it first came out, and now I find myself no longer able to edit more than one page without having to completely shut down the application and start it again. Here's what happens:
I open a page to edit, and then anything else I try to double click on (or right click and choose open page) does absolutely nothing. Any ideas why this is occurring?
Also, I've noticed a strange phenomenon where my menu has completely shifted its menu contents - pushing everything down. Nothing I did - wondering why this is happening. This has pretty much rendered Muse unusable to me and I am becoming more and more frustrated since I'm paying good money for this....please help.
Here's a screenshot of the messed up menu (all text should be located in between the green dots and not so spread out):
Also, if I try to create a border around a text box with just the bottom border showing (i.e. the other 3 sides are set to 0), that bottom border also shifts down as if the text container has suddenly expanded.
This happens with both my Macbook Air and my MacPro.
Thanks in advance for any help. I'm kind of at my wit's end....I really need to be able to update my website as this is the face of my business.
-Kristine

You could look at using a template. Create your master template, create editable and non-editable regions, then use this template create all the child pages. When you need to make a change to the menu, make it in the template and the changes will flow down to all the pages created from the template.
Using DW Templates:
http://www.adobe.com/devnet/dreamweaver/templates.html
http://www.adobe.com/devnet/dreamweaver/articles/dw_templates.html
The other option would be to create the Navigation item as a server side include...
More about this:
http://kb2.adobe.com/cps/143/tn_14380.html
http://www.entheosweb.com/website_design/server_side_includes.asp
Difference between using a template and server side includes.
When you make a change to a template, you need to re-upload all the pages created from the template.
Using a SSI, you make the change in the ssi file, upload it and all pages are automatically updated.
Nadia
Adobe® Community Expert : Dreamweaver
http://www.perrelink.com.au
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
http://csstemplates.com.au/
http://twitter.com/nadiap

Why can't I print more than one page?

I'm pring a lafge text:
<af:inputText id="it1" value="#{main_bean.resp}" readOnly="true"
simple="true" rows="#{main_bean.kvitRows}" styleClass="AFStretchWidth"
visible="true"/>
That is I use one af:inputText with many rows.
To send it for pring I use JavaScript.
<af:resource type="javascript" >
function printPage(evt){
window.print();
evt.cancel();
window.close();
</af:resource>
When printing it clips the text. If the text is more than one page it print only one page. I need to continue printing on the next pages (not to clip). When printing othe web-pages it distributes it onto several paper pages.

Michele Stapleton wrote:
I think using Numbers is too complicated because what I want essentially is a text document I can alter. I take the information they put into my form and repurpose it in a way I find more useful while performing the job. So, I want to be able to take their typed information and move it around. And add some more of my own.
You may perfectly "their typed information and move it around" in Numbers which behave as the AppleWorks Draw environment.
Here is the second page in the document which I posted before.
As you may see, the standard Word Processor features are at work:
Spell Checker
Selection…
I exported my AppleWorks documents in Numbers ones.
And of course, with the Numbers document open, you may copy pieces of it and paste them in Pages's pages.
Yvan KOENIG (VALLAURIS, France) jeudi 16 juin 2011 16:44:30
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Can I open more than one Pages document at a time with the IOS app?

This sounds crazy, but I can't find how to open more than one Pages document at the same time when using the Pages app on IOS.
It's easy on the Mac, but on my iPad? Can't seem to do it!
I'm working on a project where I'm writing one document, but having to frequently cross-refer to another. Having to continually open and close each document, one at a time, on my iPad is driving me mad!
Am I missing something really obvious? Can anyone help please?

Many thanks, that's really useful. I've saved the document I'm referring to as a PDF and can now work exactly as you described.
As you say, it's not elegant, but it does work
Just need to ensure my fingertips are very dry, as I fear any slight 'catching' with a four finger swipe and my iPad will fly across the room / train / office

SMARTFORM: how to create 3 copy (each copy can print more than one page)

SMARTFORM: how to create 3 copy (each copy can print more than one page)
Hello everyone.
my user want to have form that print 3 copy.
such as 1 copy description = master, 2 copy description = copy 1 ,3 copy description = copy 2.
so i create 3 page . I copy from page 1.
and in each page there is main window which can have data more than 1 page.(such as have a lot of sale data ,it's take 2 page for show output .so it's take 2 page in each copy)
please help me.
how to set page and window in each page for print 3 copy and each page can have main window that print more than 1 page

Hello Vinit.
thank you very much for your help.
could you help me more please.
in below code
DO NAST_ANZAL TIMES.
l_counter = l_counter + 1. " << pass this to FM and use for the TEXT to print
CALL FUNCTION LF_FM_NAME
 EXPORTING
 COUNTER = l_COUNTER " USE this to derive the text into PRINTOUT
enddo.
Now i out of office .so i cannot test.
where do i set NAST_ANZAL for 3 ?
can i input ?
NAST_ANZAL = 3.
DO NAST_ANZAL TIMES.
l_counter = l_counter + 1. " << pass this to FM and use for the TEXT to print
CALL FUNCTION LF_FM_NAME
 EXPORTING
 COUNTER = l_COUNTER " USE this to derive the text into PRINTOUT
enddo.
Edited by: dittaporn nanasilp on Mar 12, 2011 3:33 PM

How to use beans in more than one page

hello members,
can somebody tell me how to make beans availabe to more than one page ,i used scope variable as "application"
in which i set the value of java bean and in that page it show all values of that bean even it modified
but when redirect to another jsp page it does not show modifided value,it shows its default value
what shld i use tell me
following thing that i use in forwarded jsp page
<jsp:useBean="same id in previous jsp page", class="same class", scope="application"/>
and then i am using boolean variable which set false default ,but i set it manually though
setfuction (assume) in original jsp page,but in redirected page it showing it value fasle
i don't know why
can somebody (Bean Bond) help me in this problem
i will very thankfull to you
plz..................

My dear friend,
your scope is wrong. Since you run a JSP page and you want it available everywhere, the only thing that all pages have common is session. So changing your bean scope to session will keep the bean variables and the rest you have on it.
Try it and let me know.

How to deploy a Webapplication on WAS more than one times on same server?

Hi all,
I 've a special problem:
In our web-app (some DC's) also stored propertie-Files. Now we would to deploy this application more than one times at same server using different WebContentRoots. (f.e. http://server/app1 and http://server/app2 a.s.o.)
We know, that we must create different EAR-Projects and refer the web-Module and configure the application.
But in the second application there it's recommended to change some properties.
How we can handle this in JDI without copy the web-application?
I hope my question can be understood.
Best Regards
Sven Rickelt
Using Netweaver + WAS 6.40 2004 SP 13

Hi Sven,
as I'm new to NWDI, I cannot give you a 100 percent, field-tested solution. But have you already thought about using the Configuration-Adapter?
If you can change the source of your web-app, you could maintain the data formerly stored in property files using the configuration adapter of visual administrator. The SC <a href="http://help.sap.com/saphelp_nw04/helpdata/en/45/e7e14b517b42788a1c166f9f32455e/content.htm">configuration</a> allows you to access this data.
With this approach you can stick to one web-application and do the configuration work separately for each deployed application.
Best regards,
Frank

How to use more than one device under same apple ID?

How do you you use more than one device under same apple ID? say for facetime?

You don't. One Device and one Apple ID.

Column text to flow across more than one page in same column

Similar Messages

Maybe you are looking for