Column view jump-back

When copying files to another drive using spring loaded folders and column view the view snaps back to the root of the target volume. Seems like it only happens when the source object is selected from the same or a finder window.
Please check attached screen recording:
http://www.terning.net/finderbugs/column_viewjump-back.mov
This bug has been around for a while. Maybe even back in 10.4.x. Don't remember exactly. I have done an erase and install of OS X (for other reasons) and the problem still persists.
Can you reproduce this bug as well?

Yes, I've seen that. I'm pretty sure its a bug. I'd suggest going to bugreport.apple.com and letting Apple know about it. Make sure you include the steps to reproduce, as well as a link to the movie you have made (or attach it to the bug report). Good luck...

Similar Messages

  • Pdf view : jumping back problem ?

    Hello. I've been having an issue lately where i view pdfs on Acrobat.com, and when i drag the sliders up, the page first jumps to its top, then slides normally from where it should be.
    Correct behaviour while dragging sliders to the bottom : pages flow one after the other smooth.
    Same thing is awaited the other way. But here, if i drag fast, my window will "blink" with a subliminal of the full page i'm reading...
    who can i contact to send this as a private file (document is not mine and can't share on an open forum, and i didn't find a bug form)

    Hello Franck,
    Thanks for posting. We're investigating the issue you report with the PDF viewer; we've seen something like this before, so I'm confident that we'll be able to find a fix for you. Could you tell us what browser and operating system you're using, we will reply with further instructions.
    Thank you for your patience!
    Rebecca

  • Finder: Changing from thumbnail view to column view takes me back to the root folder.

    Hi,
    I was hoping someone could help me with this as it's getting a bit tedious having to re-navigate back to the folder I was in. This problem is only occuring when I am working from an external NAS Drive.
    I need to switch between thumbnail view and column view regularly, but whenever I change from thumnails to column - finder jumps back to the root folder, meaning I have to work my way back to where I was.
    I can't figure out how to stop this happening! It doesn't happen when changing from column to thumbnails, only the other way round..
    Thanks for any suggestions!
    Sarah.

    Hi Barney,
    Thanks for your reply Unfortunately though I already use AFP on the NAS drive and still have the problem, so it seems this is an issue with both AFP and CIFS..

  • Column view error

    Hello,
    I use column view to open indesign files and place textfiles and pictures into my documents. For a couple of weeks every now and then when i want to browse for an document the column view jumps to the first column, leaving the other colums blank while i was selecting a document there.
    Is this a comon problem and is there a solution?
    I use OSX 10.4.11 and Indesign CS3 (5.0.3)
    Jeroen

    Were you able to figure this out? I'm running the same OS and InDesign version, and I've had the same problem for months. It's only with InDesign -- nothing else in the suite -- and it's making me CRAZY.

  • Column view not Icon View?

    This is most annoying. Every time I restart or startup my Mac Pro and I open my MacHD, the default Icon view appears. Once I have the MacHD window open, if I click on View/Show View Options I can click off "Always show in iCon View". Then I change the view to Columns and, under View/Show View Options I click on "Always show in column view". This works until I need to restart or shutdown and startup. Then it goes back to the default Icon view.
    *How can I get this option to always show the column view after a restart or startup?*

    Barbara Daniels1 wrote:
    Easy enough to do that (at least in Tiger):
    When I first got it, I did click on the HD icon and then proceeded to drag the applications I frequently use, important folders, etc. into the dock. I organized the applications by "type", i.e. all web stuff together (browsers, Mail, etc), word processing, movie making related, photo related, utilities (Onyx, Disk Utility, Super Duper, etc). My important folders (to the right of the dock separator) all have custom icons for easy identification. All in all, I have 63 small icons in the dock (I just counted them!), set to magnify when I mouse over them and I've done it this way for so long that I pretty much know where a particular icon is located.
    You might to give it a try - it should work in Leopard?
    I use a similar idea. It is called DockFun! It provides me with unlimited number of docks. Each one is categorized like your folders. I still find that sometimes when I save a file or move a file(s) from one place to another and, with my feeble memory, forget where it is or the name I used (more often than I care to admit!) , like to search folders by opening the HD via column view.
    Back to the problem - I even tried it in "Safe" mode but I got the same results. Here's another oddity.
    The setting on my MacBook Pro, with the same OS 10.5.6, works perfectly. If I set the view to column view it remains in column view. Very Strange!!
    *Any friendly geeks out there that can maybe provide me with a Terminal command or two that will do the trick?*

  • When I select a folder in column view, finder immediately jumps to that column

    is there a way to stop this behavior? When I am browsing in column view and click on a folder to see what's in it, finder immediately jumps to that column, shifting the parent column to the left. If I click and drag a file to a parent column, finder jumps to that column, puts the file in alphabetical order, and jumps to where the file is in that column list. This may be nowhere near the folder that it came from. If I am in a column with a lot of files/folders, I then can't see the folder where I took it from. The benefit of column view is being able to see all these levels at once - the jumping around takes that away and is visually very distracting. I often want to reorganize files within certain folders and this makes it difficult and is very annoying. It sometimes takes a while to retrace my steps and figure out where it came from. I think it's more of an issue on small displays - I have an 11" Macbook Air mid 2011/lion. I think this started with Snow Leopard, but I'm not sure - I would like to find a way to disable this behavior go back to the old way where the columns stay stationary and I can look/move around the way I want to. FYI I do have spring-loaded folders unchecked. Thanks for any help.

    18 months later someone finally responds to you.  I dislike this behavior very much and cannot find a workaround.  The current push by Aple is to make the smaller devices more accessible which is radcially compromising the desktop experience.  I asume you have updated to Mavericks by now.  The auto-sizing columns remains an issue as well.  If this is driving you bonkers too.  Use TAG View and the auto resize to file name length returns.

  • Osx Lion and above.. weird annoying jump back behaviour in column finder

    When navigating through the finder in column view it will suddenly jump back to a higher directory.
    This is while viewing a network share from a NAS (InforTrend EosNAS).
    Happens much more with an SMB connection over an AFP connection but still happens.
    Anyone else having this problem? I can get it to happen on multiple machines running 10.7.5 and 10.8.2. All connected to the same server.
    I am NOT deleting any files. Although it mostly happens when I view a file. When I go back to the finder it has jumped back several directorys so have to renavigate through to the directoty I want.
    Something to do with Favorites perhaps??
    Very annoying...
    Grant

    After trying many different solutions we haven't had this problem for a week or so.
    I did this:
    Go to Finder Preferences and turn "Spring-loaded folders and windows" off.
    Also make sure that your server has a valid gateway setup in it's network settings.
    Ours didn't (it's a NAS running embedded Linux) and I fixed it at the same time as we changed the "Spring-loaded..." setting.
    So not sure which of the two fixed the problem.
    Here's some links to other discussions on the problem:
    https://discussions.apple.com/thread/2577564?start=30&tstart=0
    https://discussions.apple.com/thread/2560838?threadID=2560838

  • In the previous Firefox, I could bring up a list of pages viewed within a tab, so could quickly jump back several pages, but I can't find this now.

    In the previous Firefox, I could bring up a list of pages viewed within a tab, so could quickly jump back several pages, but I can't find this now.

    You can get the drop down list by either right-clicking on the back/forward buttons, or holding down the left button until the list appears.
    If you want the drop-down arrow you can add it with the Back/forward dropmarker add-on - https://addons.mozilla.org/firefox/addon/backforward-dropmarker

  • Problem by jumping back to first view

    Hi ,
    I have implementiert 3 views in a window. The last view has a exit button. When I click the exit button, I can jump back to the first view. But then if I go on from the first view to the second view, the programm is broken, because a  1..1 cardinality of a node has been violated.
    If I use exit button to leave the window, it runs good.
    It seems that the 1..1 node has been initialized again.
    Does any one have a idea how to handle this problem?
    best regards

    Hi,
    I think when u go back to first view you want the node to be empty.
    There is one solution in my mind.
    When u naviate from 1st view or any view.
    Use plugs to pass the right state of each view to the next.
    That means in the HANLEINP function reinitialise the node.
    I hope it helps.
    Plz revert back in case of issues.
    Regards,
    Sumit Oberoi

  • WHY no scrubbing for video in column view??

    I recently upgraded my tower to Leopard and I must say I am very disappointed that I cannot scrub through video or audio files in the finder window column view like the last OS.
    Is there a setting I can change to get this functionality back? I see this as a huge step backwards. Why would they change this?

    Mark Cookman1 wrote:
    For the discussion: I have gone back and am staying on 10.4 untill there are the standard AV conrols back in column view.
    We all make choices. The feature you wish may never again be available, or only through 3rd party apps, just as full GUI FTP and Sherlock are not available in Leopard. Win some, lose some.
    I suggest you submit this as a feature to Apple or them may never know you are missing it.
    https://bugreport.apple.com
    Message was edited by: nerowolfe

  • When I sort by date added in Column View in Finder, how can I make the most recent files appear at the top of the list?(Mavericks)

    In 10.8, when I sorted Finder by date added or date created in column view, the most recent files would appear at the top of the list. Currently, this happens as it should in every single view mode EXCEPT column view (which is pretty much the only view I ever use). Currently, I have a folder with over 2000 files in it that date back to 2011, so now I have to scroll for like ten minutes just te get to files that were most recently added. Who in their right mind would want to sort by last modified with the oldest result listed FIRST? Ridiculous. I can't figure this out. Any help?

    Thanks for the reply leroydouglas! Unfurtunately this doesn't cause the column to be ordered correctly either. After selecting this option, the files seem to be ordered by label, and the most recently added file is somewhere in the middle of the list. I'd like it to be at the top, and have other files/folders descend in retrochronological order by their add date.
    Any other input from the community would be greatly appreciated, even if it's just confirming that this is/is not expected behavior. I'd be super bummed to find out that this IS expected behavior, as it's really counterintuitive and extremely inconvenient.
    Thanks again!

  • I can only go back one page at a time because the drop-down jump back multiple pages feature is missing; how do I get this feature back?

    On Firefox 3.6 the back and forward buttons also had a drop-down menu to enable me to jump back to one of the last, say, 10 pages I had viewed rather than only go back one at a time. Also, the reload button appears to be missing and I can't figure out how to bring these back. Otherwise, an awesome upgrade; thanks for all your hard work on this fantastic product.

    You can right-click either Back or Forward button to open the tab history list.

  • View always opens in Icon view, not Column view

    Hello,
    I open Finder and it always opens in Icon view. I set it to open to Column and close Finder. When I reopen Finder, it opens in Icon again. I've tried trashing the Finder plist, repaired permissions, but nothing. Is there anything I can do to keep it opening the same way? It's pretty frustrating.
    Thanks.

    Hi Danielmak,
    This Terminal command is not specifically related to Column View I'm afraid...
    I don't fully understand what it does, but what I can tell you is that the script - for me & a few others - got rid of the common problem where the Finder-window only for the Macintosh HD (i.e. double-clicking on the Mac HD icon) always re-set back to Icon-View after a re-start, despite changing the window to List View and un-checking 'Always Open in Icon View' in View Options (Cmd+J).
    I'm not sure I fully understand your problem, but..... You can have separate Finder-windows in different view-types (icon/list/column etc), BUT, the view-type does not automatically change between different types as you drill down into the folders in that particular window.
    If you want a particular view-type & window-size to stick for each drive or folder on the desktop, you have to make your changes at the first level, then close the window... When you double-click again on that same drive, the view-type (don't forget to un-check the 'Always open in icon view' in View Options) & window position should be the same. If you drill down into the folders in that hard drive, & THEN make changes to view-type & window size, they will not stick (i.e. the next time you double-click on the HD icon, it will re-open in the originally-set position & view-type.)
    Hope that helps. Apologies if I've misunderstood the question.
    All the best,
    Jason

  • Duplicating folders in column view

    When I duplicate a folder in column view, Finder selects the duplicate folder but don't show its contents or it simply shows the folder icon. I need to click on any other folder and then come back to the duplicate folder to see what's inside.
    Just wondering if anyone else is having this problem, if not, how to solve this.

    J, I have a few ideas, but I think you should first get Applejack...
    http://www.versiontracker.com/dyn/moreinfo/macosx/19596
    After installing, boot holding down CMD+s, then when the prompt shows, type in...
    applejack AUTO
    Then let it do all 5 of it's things.

  • Opening windows in column view by default

    Hello all,
    I just got a new iMac 24” aluminum a few days ago and have set up all of my apps, defaults etc. I want my windows to always open in column view and have used View Options to set it that way. Each day when I start up though, the windows revert back to Icon View and I have to reset them again. On my old machine I had them opening in column view by default and they always did so. And I remember that there used to be a button at the bottom of the View Options window that, when clicked would keep whatever you set your options to as a default for all windows. That button no longer exists. Possibly somewhere in one of the updates along the way it’s been removed. Anyway, I want to set my windows to always open in column view by default and can find no way to do that anymore. Does anyone know how?
    BTW, the new alu 24" is GREAT!!
    Rick

    Then there's something wrong with you OS installation. Not really sure if there's an easy fix other than an Archive and Install. But you can try a few things first.
    1. Repair the hard drive and permissions:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Delete the /Home/Library/Preferences/com.apple.finder.plist file.
    3. Create a new user account and log into that account. Does the problem cease?
    4. Boot into safe mode. Does the problem go away?
    5. Use a utility such as TinkerTool System and clean system and user caches.
    If none of these have any effect then an Archive and Install may be necessary:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Maybe you are looking for