Column wise drill down a char will have to effect to a singe Key Figure

Dear SDNers,
I am drilling down a Char info object in Column wise (-->) this drill down is effecting to all Key figures in the query.. But I need this will having to effect to a single key figure. Please suggest me. For other Key Figures it should be row wise drill down. Pls suggest.
Thanks,
Swathi

Hi
This is not possible, you need to use keyfigure only in coloums otherwise not able to achive.
Regards
Jagadeesh

Similar Messages

Overal Result is changing when drill down the char - report is having cond.

Hi ,
we are running one report, the overal result is changing by drill down one char. if we remove drill down the same char. then it is displying the original value.
Note: we have one condition on the report. in the _Characterstiv Assignment tab_ the radio box Individual chars and Chars. combinations is selected.
can any one please sugest us, how to get the same result even though we dril down the other chars.
Thanks in Advance,
Raju

Hi Gangaraju,
If i am correct, the key figure column for which the total is changing is having the property set as "Calculate result as :Total" at query designer level.
If you want to display the same total irrespective of the drilldown of the characteristics then remove this property from the keyfigure in Query Designer .
Then you will see the original total irrespective of the characteristic being taken for drilldown.
I hope the above reply was helpful.
Kind Regards,
Ashutosh Singh

Capitalization column in drill down report

Hi,
I have a requirement to make a column in IM drill down report which will show values of capitalized investments (WBS and orders) assigned to the investment program. Do you have an idea how to do it?
Thanks in advance!
DD

Hello,
You will have to go for new development /enhancement linking your capital proj /WBS to the new logic of the report.
Regards,
Sumanth

Vendor wise drill down in Trial Balance or Balance sheet report

Dear Experts,
Is there any report for Trial Balance or P&L/ Balance Sheet report where vendor wise drill down of amounts is possible?
Please suggest.
Regards
Komal

Hi Dear ,
You can use F.08 for Trail Balance and Vendor details - S_ALR_87012082 - Vendor Balances in Local Currency
You can get cumulative balance for the vendor.
Regards
Radha

Stacked Column Chart drill down

I have a stacked column chart. Data is dynamic. Sometimes one column will have 0 as value.
I need to do a drill down on the ones which has value. In order to do a drill down everytime, I don't want my drill down to be tied to a specific serie...
How can I do that?
Thanks,
Wen

Hi Wen:
Let me do a quick demo to you so you can learn how drill down for stacked column chart works
1. Create a new stacked column chart.
2. Choose data binding "By Range" and "Data In Columns" binds to range "A1~C2", which has range data as following:
a, 1, 2
b, 3, 4
3. After finishing step 2, there will be two series created (Series 1, and Series 2)
4. Open drill down tab and check "Enable Drill Down".
5. Choose "Insert Type" as "Row".
6. Click "Series 1".
7. Bind "Source Data" to range "D1~E2" which contains value as following:
11,12
13,14
(these are the drill down value you want to insert)
8. Bind "Destination" to "D3~D4" (empty cells)
9. Create another component "Grid" under "Other" folder.
10. Bind grid data to "D3~D4" to present the drill down data.
11. Preview the xlf file, can click values in series 1, you will see the drill down result. (Grid will be refreshed with new drill down data)
Hope the demo above can help you in your practice, also you can refer to help documents for more information. Let me know if you have any other questions!
Thanks!
Bill

Rag: Query performence - Report taking long time when drill down a Char.

Hi All,
After executing the report when we try to Drilldown PO Char, then the report used to take long time nearly 60 to 90 minutes and thorough an errors that "An error is occurred during loading" or "Connection Timed Out".
The report is created on Multiprovider which is build on 7 infocubes and the data for the PO char is coming from all the 7 cubes.
So we have created Aggregates on the 5 Infocubes based on system proposal.
Then,
We checked in RSRT, the data is coming from all 5 Aggregates and also when we drill down the PO also the data is coming from 5 Aggregates itself.
But,
The report is running fine and also when we drilldown the PO to show all the PO values, then the report showing all the POu2019s details by taking nearly 15 mins only.
Here our concern is why the report is taking 15 mins when we drill a PO char.
Could any one give suggestions please.
Thanks in Adv.
Raju. E

Hi,
please check this list for query performance:
http://sapbwneelam.blogspot.com/2007/10/checklist-for-query-performance.html
Regards
Erwin

While drill down a char system going into dump

Hi,
We have changed 0COUNTRY as a navigation attr to the 0COMPANY and added to the Muti provider.
In query level initially for 0COMPANY data is paulating while trying to drill down 0COUNTRY with 0COMPANY then system is going into dump.
Thes system message;
The current application triggered a termination with a short dump.
An error occurred while communicating with the BI server.
As a result of this error, the system has been disconnected from the BI server.
Detailed description
can any one let me know the reason.
Regards,
Sharma.

Hi,
The problem is resolved in my self.
Regards,
Sharma

LIS REPORT-MATERIAL WISE DRILL DOWN

Dear Gurus,
While executing any LIS reports with drill down by material.
I am getting only material description.
Is there any way to see the material number in standard LIS reports

Hi,
In any LIS Report...go to Menu -
> Settings ---> Characteristics display -
> Key & description.
Also adjust the column width..so that u can display both Material number & description.
Thanks & regards
Mahesh
Reward points if useful

When playback progressive video in FCP X it will have flicker effect, how can i remove it

when i shoot video in PAL 25p , and it will play in my imac with FCP X this video have flicker effects and 30p will show small flicker, when i use 25i format there are no flicker effect in FCP X, in canon 7D have only progressive video (1080p) i want PAL , how i can remove this flicker effects, any method have in FCP X
please help me
justin

It is very simple. Yahoo uses Microsoft .NET FRAMEWORK Assistant to hijack your browser. Go to the upper left hand corner (Firefox 10 - it might be elsewhere on older versions) and click on the drop down arrow. On the right hand side, click on "Add-Ons", and a list will appear. Locate .NET Framework Assistant. On the right side, click on "disable" and then either click on the small line that says "restart", or simply close Firefox by clicking on the red "X" in the upper right hand corner of your screen. Reopen Firefox and -Voilà, your problem is solved. As far as I am concerned, Yahoo has created a virus when they hijack your preferred browser - a good reason to dump Yahoo for any other use. On the other hand, Microsoft is not innocent in this endeavor. If you want to get rid of the real problem. Dump windows and switch to '''Ubuntu''' Linux. You can find it '''free''' on the internet.

Dynamic Drill Down Column wise in Webi Report

Hi All,
I need to have dynamic drill down functionality in my webi report.
For example
I have Columns;
Fiscal Year, Fiscal Quarter, Plant, No. of PO line (4 columns).
Drill down on Plant level.
When i click on plant a new column should be added in webi report.
Now my report should look like this;
Fiscal Year, Fiscal Quarter, Plant, Buyer, No. of PO line (5 columns)...(New column Buyer is added)
How to do this.
Please help me guys.
Thanks in advances!!!
Regards,
Gaurav Nayar

Hi,
What you want is possible as long as the table formatting you have helps.
What you can do is add a column to the table. Then use the following formulas
Formula in Column Name Cell:
=If(Drillfilters([Plant])="") Then "" Else Nameof([Buyer])
Formula in Column Values Cell:
=If(Drillfilters([Plant])="") Then "" Else ([Buyer])
Now, what I meant by "as long as your table formatting you have helps" is that, you need to change the border colors of the extra column to match with the report blank area, means the borders should be white in colour and the column width should be autofit and they wont be visible as they are white, once you drill on plants, the values come up.
So if your table has no border, that will be perfect.
Hope this helps.

Drill Down in Column Chart

I am fairly novice in Xcelsius and am having issues in understanding the User Guides instructions on enabling drill down. Under series name I have the titles of the sub categories I would like to 'drill down,' is this correct? I have filled in all of the necessary options but it doesn't seem to be working. I only want to drill down one of my series, I'm assuming that's not an issue?

I am not 100% clear with what kind of model you are trying to design and what data you are taking. Still i am explaining you the in short how Drill function works with an example.
I have a data of employees and salary and I want to create a column chart1 which will display the composite values of all the engineers and salary.Engineer name on X-axis and Salary on Y-axis.
Now I also want a chart which will display the salary of the emplyees individually which will be displayed after clicking on the particular salary bar from the Chart1.
This is when drill down functionality comes into picture.
Do achieve this we take another column chart2. Now in Chart1 properties go to Drill down section and under the series you find a tab Insert in. Select a blank cell just under the salary column and map it.And in the source data section select the entire Salary column.
incase you want to drill on multiple columns then select multiple columns on source data and also select multiple blank cells just below the multple source columns. Preferably highlight those cell with colours.
Now in Chart2 go to property and select that particular blank cells under Data range section same as you selected in drill down>insert in.
Now chart1 is linked to Chart2.
whenever you click on any one salary bar of any engineer the corresponding chart2 will display salary of that particular engineer.
I would also request you to go to the installation folder where you will find a folder called samples under which you will get lot of sample models inlcuding drill down model which will give you a better understanding of how the drill down concept is used.
Hope this reply helps.Let me knwith you feedback.
Regards,
Soumya

Unable to drill down with binary logical operation issues

QSError: 10058] A general error has occurred. [nQSError: 59001] Binary logical operation is not permitted on Double operand(s) (S1000)
Basically this comes from my drill down report. I have 2 hierarchies on one report, 3 columns --- months, state, measures..
If I drill down from STate ----> lowest, then drill month--->lowest, things works fine; but if I start with month---> lowest, then drill state down, I will get this above error..
I checked the column data types from DB, month is char, week is date, state is char, measure is double
SO let me know what you think?
Thanks

is it helpful?
On Paass Navigation for another report

Key Figure values based on characteristic Drill-downs

Hello All,
I have Issue with my drilldown options in the report. The values of Sales qty need to change at particular drilldown.
I have Sales Revenue and Sales QTY key figures in my DSO with plant, factory, customer and Business type (Values A, B, C and D) characteristics.
IN the report requirement I want to show the SALES QTY for only Business Type "A" at Plant , factory and customer level, but when I am at the Business code level, then I am to show all the quantities by that level.
THe sales revenue should always show values for all Business code irrespective of the drilldowns.
please provide suggestions and code on how to go about the issue.
thanks,
pra.

Hello Guys,
Thanks for your response.
Let me explain clearly...with an example.
We have DSO which has 5 chars and 2 KFs.
Chars - Company Code, Plant, Customer, Material and Business Code (which has values A, B and T).
KFs - Sales Qty and Sales Revenue.
Report output ---
Customer
Company Code
Plant
Material
Business Code
Sales Qty and Sales Rev
Requirement is a follows -
When the report is run.... the report will display on Customer with KFs.
then if user wants to pull company code he can do so...as will other chars (Plant, Material and Business Code)
but the condition is that when the user is seeing the report at customer with KFs ,....the KFs should only show values where business code = "A"
so is the same with other chars - Company code, Plant and Material.
But when user drags and drops the Business Code char in the report against the KFs .then the report should include all Business Codes ( A, B and T) with corresponding sales qty and sales rev for all business codes.
Solution - Partially working--
What I have done..is restricted the sales qty and rev with Business code = A, its working fine for all drill downs except that, when I am at business code level its showing as
Business Code QTY REV
A             300          3000
B                0              00
T                0               00 .
Hope you got the issue. Please let me ,,if you need any information.
Thanks,
Pra

Problem with drill down on hierarchy with data on diffrent levels

Hello,
Im working on a project using oracle bi 10.1.3.4.1, and im kinda stuck with some problems.
I have a transaction table in which i have data about products, something like :
prod_id
amount1
amount2
and a product hierarchy which is something like:
prod_id
prod_name
parent_id
since bi doesnt support hierarchies, i had to faltten the hier table to somehing like this:
prod_id
lvl1_prod_id
lvl2_prod_id
lvl3_prod_id
lvl4_prod_id
and use this as my hierarchy in oracle bi. thus when i drill to lvl3, it will find all the products which are decendents of lvl3 value and group them.
the problem is, that the hier tree is not even, one product data (in transaction table) can be for lvl4 and another for lvl2. so for a lvl2 product id's in level 3 and 4 will be null.
when i try to drill to lvl 4, it takes all the rows which have the selected value in column lvl4 and group them, and if lvl 4 is null, it would sum up all the rows that have no parent at lvl4...
i hope you understand... cause it is a bit complicated..
anyway i would eventually like to add a filter of != null to the column being drilled down.
but how do i know which column is it?
i cant add a != null filter to all the columns since most if not all of them will have null in some lvl (lvl 10 or so).
one suggested solution was to make a report for each lvl with the !=null filter on the report lvl, and use navigate instead of drilldown... but that would mean i have to make 10 reports for each "real" report... a big problem to maintain.
hope i was clear enough, any suggestions?
thanks a lot!

Hi Ingo,
Thanks for your reply. If I combine two objects in one objects then I cannot use that object for drill down in my report.
I want to drill down for both Key and Text.

Hyperlink (Drill-Down) in a Sub-Report

Hi,
I have a report in which I am using on-demand sub-report.
In the Sub-report I added a working Hyperlink to one of the columns to drill-down to transaction details.
However when I run the report I can't drill from the Sub-report. The hyperlink inside of the Sub-report is not working.
Is there any work around to make this to work?
Thank you,
Tanya.

Hi Tanya,
Let's try breaking this down a little bit more granularly. I'd like to know what the formulas in the subreport shows and what the main report shows. It's always a possibility the subreport's formula is returning 0 and passing it properly to the main. So this will show that.
1) The formula in your subreport, just have it do:
WhilePrintingRecords;
shared numberVar Nar_Count;
Nar_Count:=Count ({Command.YTD_NARRATIVE});
Show/Unsuppress the subreport's Report Footer so we can see the formula.
2) Leave the formula in the main reports GF1 as:
WhilePrintingRecords;
shared numberVar Nar_Count;
Do you see a number in both formulas or do you see the number in the subreport but not the main report?
I want to see if the formula in the subreport is working and not just returning 0.
If the formula in the subreport works then I want to know what the formula in the main report is showing.
If this does work:
1) Change the formula in the subreport back to:
WhilePrintingRecords;
shared numberVar Nar_Count;
Nar_Count:=Count ({Command.YTD_NARRATIVE})+Count ({Command.PTD_NARRATIVE})
2) Leave the formula in the main report's GF1 as:
WhilePrintingRecords;
shared numberVar Nar_Count;
Again, what do you see in the subreport and the main report?
Good luck,
Brian

Column wise drill down a char will have to effect to a singe Key Figure

Similar Messages

Maybe you are looking for