ColumnChart doesn't display.

I try to use ColumnChart in my Flex Project but I just see a blank screen.. Please help me to resovle it. Many thanks....

You're adding the artwork incorrectly.
Instead of selecting the first track of the album, select the complete album. Then select File/Get Info and answer "yes" to the "multpile items" question. The Artwork box is now on the Info tab instead of its own tab. Paste the artwork into that one box and that will add it to the whole album.
I can't be precise about the detail, but as far as I know, there will be one piece of artwork and iTunes and your iPod will refer to that one picture for each track, so it will not be taking up extra storage space.
Pasting the artwork into each track individually will drive you crazy - and I suspect it will take up extra space.
(If fellow "discussions user" tt2 adds to this post, I'm pretty sure he will confirm {or not if I'm wrong} what I've said about the extra space used if you paste into each track individually.)

Similar Messages

XMP doesn't display proper info in Photoshop CS2 for Mac.

Dear List members:
I have just recently installed Creative Suite CS2 and begun to explore the functionality of XMP. After purchasing Bruce Fraser's book on Camera Raw for CS2, I downloaded Metalab (Pound Hill Software) and created my first custom XMP panel that can be seen under the file info in Photoshop when an image (digital photo) is open.
The problem is that I noticed a few odd things and began to question myself if there is some kind of bug or a problem with my installation of CS2.
1. The window that opens under the file info command has several categories of information on the left to be chosen from, in the following order:
(1)Description, (2)Camera Data 1, (3)Camera Data 2, (4)Categories, (5)History, (6)IPTC Contact, (7)IPTC Content, (8)IPTC Image, (9)IPTC Status, (10)Adobe Stock Photos, (11)Origin, (12)Advanced
The Camera Data 1 option when selected opens a panel in the file info window that seems to contain all the information it is supposed to contain. The Camera Data 2 panel, on the other hand, doesn't display any information at all. Although the fields are there, they are empty. The fields are:
(1)Pixel Dimension X and Y, (2)Orientation, (3)Resolution X and Y, (4)Resolution Unit, (5)Compressed Bits per Pixel, (6)Color Space, (7)Light Source, (8)File Source.
All these fields are empty but when looking at the same file under Bridge the information is there, displayed under the metadata menu.
This is something I noticed "before" installing Metalab so I know it is not a compatibility issue generated by the installation of the software.
After installing CS2 I noticed that CS1 remained installed in my system. The version I purchased of CS2 is the upgrade one. Since I have no use for CS1 as I am now totally converted to CS2, I would like to uninstall CS1. The following are some of the questions I have:
1. How can I uninstall CS1 without causing any problems to my installation of CS1 ? Is there an uninstall utility with the software or will I have to uninstall the entire package manually ?
2. My G5 came with only one internal 160 GB drive where I originally installed CS1. I then purchased another internal 400 GB HD and copied the original drive onto it. This week I am going to replace the original 160 GB drive with a second 400 GB drive so that I can do regular "mirror image" back-ups between the two drives. Shold I expect any problems as I remove the drive where I originally installed CS1 ? Since I used disk utility to "copy" the 160 GB drive onto the 400 GB drive, my understanding it that any Adobe software key or authorization was also transferred to the drive. Is this right ? In case it hasn't, how can I transfer this information so that after I remove the 160 GB drive I will not experience any problems when trying to run CS2 ?
3. How can I fix the problem with the Camera Data 2 panel under the file info window and command ? I noticed that the folder that is supposed to hold the Custom File Info Panels (HD>Library>Application Support>Adobe>XMP>Custom File Info Panels) has files for CS1 and CS2. Could this be a problem ? There many more files with .dat extenson than there are with the .txt extension. Bruce Fraser specifically says that the ones with the .txt extension are the ones that hold the XMP templates for information related to the image files. The files I have in this folder with the .txt are:
(1)Camera1_CS2.txt , (2)Camera1.txt , (3)Camera2_CS2.txt , (4)Camera2.txt , (5)Categories.txt , (6)History.txt , (7)IPTC_Contact.txt , (8)IPTC_Content.txt , (9)IPTC_Image.txt , (10)IPTC_Status.txt , (11)StockPhotoInfo.txt
The only ones that have two separate files one each for CS1 ad CS2 are Camera 1 and Camera 2. Camera 2 seems to be the only that is now non-functional. What should I expect to happen if I were to manually uninstall the ones that relate to CS1 ? Could that cause any problems ?
My apologies for the long post but I didn't really know how to make it shorter.

The Photoshop and/or Bridge forums would be more likely places to get answers to your questions. This forum is inhabited more by programmer types interested in implementing the XMP specification in applications we write.
I'd expect CS2 to ignore CS1 panels so I doubt that's the issue. Panels don't interfere with each other--they just offer different views of the data. In any case, move the extra panels to your desktop and see what happens.
As far as I know, all you need to do on the Mac is drag the CS1 application folder to the trash to uninstall it.

Mac Mini Doesn't Display through Philips Tube HDTV

I have a Philips tube HDTV with a VGA connector in the back, and used the DVI-VGA connector that came with my new Mac Mini to connect. I don't have a computer monitor at home. The TV doesn't display anything.
So then I took the Mac Mini over to a friend's. He has a VGA monitor, and so he ran the Mac Mini through setup and set it to the lowest possible display settings. I came back here, rebooted and plugged it back in; still no display.
Then I tried this:
"First thing to try is to boot the mini into safe mode by holding down the shift key as it boots up. This should allow it to boot, and then give you access to the display preference pane to adjust the settings back to those that worked.
If that doesn't work, try disconnecting the TV, and rebooting the Mac with no display attached. Once it has fully booted and enough time has passed to allow the desktop to be displayed, reconnected the TV. This should force the mini to boot into a low-res mode that works with just about anything, then when you reconnect the display, either cause it to auto-sense the correct resolutions, or give you access to display preferences."
This didn't work either. Any suggestions?

Hi Alan,
Check your TV manual to see what resolutions your VGA/RGB connector on your TV will accept. Being a HDTV it is likely to be from 480p to at least 1080i.
You then set the resolution in your Display preference pane to 640x480 and you should get a picture on your TV. The trick is to set it when you can't see anything! Attaching to another device may not help because the Mac detects that device when you set the Display and will know its not that when attached again to your TV. When attached to your TV it is setting another resolution it thinks will work. It is clearly guessing the wrong screen resolution when you do connect it.
I overcame this situation myself using a VNC client. That requires you to have another computer you can use to control your Mac Mini via VNC. You can then access the Display pane via VNC and set the 640x480 resolution which will work.
For setting 1080i (and the VNC process) please see:
http://www.macosxhints.com/article.php?story=20060319073027371&query=1080i%2BMac %2BMini
I am guessing you can also use an S Video adapter - available from Apple - to connect to an S Video port your TV may also have. That won't help with the VGA connection though.
Hope this helps.

Secondary Cost Element Values doesn't display in Profit Center Report

Hi everyone,
I'm having a problem with our Profit Center plan/actual/variance reports wherein it doesn't display the postings I made to the Secondary cost element when I executed an assessment cycle (KSU5). I already set in the configuration that all postings to be done in the cost centers, should have a parallel posting to the profit center assigned to it. I can see the postings in my cost center reports, but not in my profit center report. Could I have missed out on any procedure to enable the secondary cost element parallel posting in my profit centers? Any help would be appreciated. Thanks!

it might be the configuration of the library or some parameter in the report (record type should be 0 and 2 for actual values, where 2 stands for distributed values and 1 and 3 for planned values)
but it also might be that the reconciliation is done between different CC and same PC
- check your CC organisation asignment
- if sender cost center and receiver cost center have tha same PC it is probably the reason
- I had that problem my self and didn't solve it
cheers
matej

WEB.SHOW_DOCUMENT sometimes doesn't display the generated PDF file

Hi all,
I'm using the following code to generated my report from Forms: 
V_REPORT_ID := FIND_REPORT_OBJECT(V_REPORT_NAME);
V_REPORT_SERVER_JOB:= RUN_REPORT_OBJECT(V_REPORT_ID,P_LIST);
 V_JOB_ID := substr(V_REPORT_SERVER_JOB,length(:GLOBAL.REPORTS_SERVER)+2,length(V_REPORT_SERVER_JOB));
 V_REPORT_STATUS := REPORT_OBJECT_STATUS(V_REPORT_SERVER_JOB);
LOOP
 IF V_REPORT_STATUS = 'FINISHED' THEN
 V_TMP_PDF := :GLOBAL.APACHE_HTML_FOLDER ||'rpt'|| V_JOB_ID ||'.pdf' ;
 COPY_REPORT_OBJECT_OUTPUT(V_REPORT_SERVER_JOB, V_TMP_PDF );
 WEB.SHOW_DOCUMENT(:GLOBAL.AS_HOME_URL || 'rpt'|| V_JOB_ID ||'.pdf' ,'_BLANK');
 END IF;
END LOOP; 
Everything works fine except the WEB.SHOW_DOCUMENT part. In some clients, this command does what it required from it and opens a new browser window with the PDF report displayed on it. In some other clients, this command does nothing: now window dispalyed. When I refer to the Application Server, I see the PDF report successfully generated there. When I put the URL of the generated report manually in the browser address, I can see the report.
 
Why the WEB.SHOW_DOCUMENT doesn't display the generated PDF report in some clients?

I agree with the previous 2 posters.
Also firefox and ie handle it differently. Make sure you test on what your clients use.
Sometimes acrotray.exe is completely retarded and doesn't work.

MSI 970a-g46 motherboard starts up but doesn't display anything.

Hello, I'm having problems with a new motherboard I got from Amazon, specifically the 970a-g46. The following are my specs in use with this motherboard:
CPU: AMD Phenom 2 x4 965
GPU: nVidia GeForce 560 GTX
Ram: 8gb Kingston HyperX Fury 1866mhz.
PSU: Corsair 650TX (650 Watts)
Compatability-wise, everything checks out so I wasn't expecting problems at first. All the other parts excluding the ram I've used before. Here's exactly what happens:
I power up the computer after everything is installed and connected. The 4 phase LEDs turn on which tell me the CPU is powered up and working (so I assume). I don't get any beeps or buzzs mainly because I don't see any speaker/buzzer on this board. The monitor blinks and while it is connected to my GPU, it doesn't display anything, it's just a black screen. I can leave it on for a few minutes and I'll still not see anything happen. An important observation here is that my keyboard which has LEDs will turn on after a short period of time in boot-up (with my older set-up that is). This does not happen ever regardless of how long I leave my computer on on this new mobo.
I've gone over and checked/tested numerous things:
* The PCI-E and ATX cables for the GPU, motherboard and CPU are all connected and secured (I've tried both 4-pin and 8-pin connections for the CPU, neither help).
* I've tried jumping the CMOS multiple times to no avail.
* I tested the ram on another computer and it worked just fine on that one.
* I've tested the motherboard without a GPU and it still does nothing (though I think that's because this motherboard doesnt have its own integrated GPU for some reason).
So far the only possible reasons why my computer is not working is because of my PSU (very unlikely as it's only a year old and it's a Corsair, which I've heard is very reliable in the long-run), GPU (It is quite a few years old but even without the GPU my computer still doesn't go past boot-up), CPU (possible due to its age and how many freaking time I've reseated it (probably around 8 times) so I wouldn't doubt it, but before I put it into this motherboard I did check its pins and they were all there and placed nice and smoothly into the socket.) and finally the motherboard (it's possible that this is just a defected motherboard and giving me a super hard time which would be a first in all the years I"ve spent computer building).
The best case scenario of course is me giving some kind of oversight to how I transferred over the parts and connectors. I might've missed something obvious to please any advice/insight on how I can solve this problem would be greatly appreciated
EDIT: Some other things I did but forgot to mention:
* Checked ground nut things and ensured they matched the specifications of the motherboard ATX; only 6 are under the board and each one is aligned up with the holes on the board as designed.
* Tried booting up without powering the CPU. Only one phase LED light came on, still the same problem (for an obvious reason this time now).
* Re-seated GPU multiple times, re-connected cables multiple times.
What I have NOT done is re-seat the CPU because I am almost out of acetone so I would need to get another supply of that which won't be until tomorrow. I also have not re-seated everything back on my older motherboard to check if it still works. Tomorrow I'll most likely do that and if I find that the old motherboard works flawlessly then that tells me that the new motherboard I got is either defected or there's some compatability issue I"m missed out on.
EDIT 2: Just found a speaker and plugged it into the motherboard. Booted it up and I got no beeps whatsoever. So this mobo is giving me no video activity (there is a signal it's just blank), and no beeps from the motherboard. I have no idea what that could mean at this point.
EDIT 3: I decided to test a few things with the new speaker I just got. First I removed ram and tried running, I got 3 beeps which I assume is the beep sequence of faulty/no ram. Removed the power to CPU and the GPU itself individually, gave no beeps this time.

Quote from: rhradacut on 06-January-15, 16:49:14
What's the serial number of your MB? Needed to determine what BIOS may be on the MB. Exactly which version of the CPU is it? There were several different 965 CPUs and they required different BIOS versions, 1.2, 1.9,2.2 depending on which CPU you actually have.
Also another problem may be that native memory supported by your CPU is DDR3-1333, not 1866
None of the supported CPUs have integrated graphics, any MB graphics would be in the chipset, not CPU. Examples would be 785G, 880G
Thank you very much rhradacut! The problem was that the mobo for whatever reason was forcing 1866mhz on my CPU when it only supported up to 1600mhz. I had to install a spare ddr3 module to downclock it so that I could access the BIOS and manually set the DRAM timing to 1600mhz for it to work. That's a very strange problem that I figured would've been auto-resolved by the hardware, and would also be a big problem if I didn't have any spare DDR3 ram to work with.
Once again thanks for helping out on solving my problem.

My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please ad

My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please advise

Try Andrei Cerbu's post here, JF Fourie's post here, or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update. See also TS1363: iPod: Appears in Windows but not in iTunes.
tt2

IPod Touch doesn't display playlists in ascending ASCII order, why / It shows up in correct ASCII order in iTunes Devices listing?

My iPod Touch doesn't display playlists in ascending ASCII order, why / It shows up in correct ASCII order in iTunes Devices listing?

Any suggestions? Anyone?
MacBook Pro 15" 1.83GHz Mac OS X (10.4.6) 3G 20gb iPod

Mapping canvas of the mapping editor doesn't display

I don't want to reinstall the OWB, I've tried on everything on the Design Center GUI, the mapping canvas has just being hiding somewhere seeing me tearing my hair. I will almost die. But all the pluggable mappings show their mapping canvas as they did.
I can't remember what I've done in the other day and so lose the mapping canvas, every mapping in the same module just doesn't display its canvas, all other windows (palette, explorer...) show normally.
I've tried creating a new project and creating a mapping in it. The mapping canvas still doesn't come to the display.
Is there any configuration file to set control over the mapping canvas as well as all other GUI elements?
Any direction, Thanks a million.
Oracle 10.2.0.1.0
OWB 10.2.0.1.0
Work Flow 2.6.4

I solved it.
It's in <owb_dir>\owb\bin\admin\MappingEditorLayout.xml.
I replaced
<SPLITTER orientation="0">
</SPLITTER>
with
<DOCKABLE tag="ROOT" width="714" height="660" min_width="50" min_height="16" pref_width="714" pref_height="660" collapsed="false"/>.
Of course, then relogin to the design center.
It works for me.

JSP doesn't display Oracle varchar2 Items on screen

I recently bought new laptop with windows XP professional with service pack 2. Loaded Oracle 10g Client on it. I have a Dell server with Linux and Oracle database 9i. Accessed the this database through new laptop using SQL plus window and works OK. (With that it is sure that my hosts file updated correct with proper IP address of server and tnsnames.ora files).
I have created a JSP application to access this database. It works perfectly OK in my old laptop with Windows XP home with service pack1. The connections are established through ODBC Data Source Administrator (Control Panel->Administrative Tools->Data Sources) by adding a System Data Source. The application works perfectly OK and displays all fields that I intended and coded for. Only thing is it has Oracle 9i client.
But the same application in the new laptop doesn't work properly. It doesn't display Varchar2 values. It displays only Number and Date data types. This shows it is connecting to the database (oracle 9i). But varchar2 values are not displayed. The connections are established through ODBC Data Source Administrator.
I'm using Tomcat server (jakart-tomcat-5.0.27) on both the laptop. Please help me here.

Suggestion: don't use the ODBC driver to connect to Oracle. I presume you are using sun's JDBC-ODBC bridge?
Oracle have got a reasonably good 100% java JDBC driver which is all you need, and is a lot better than the ODBC bridge. I would recommend using the Oracle thin driver.
Your java code should remain largely unchanged. The only thing you would need to alter would be
1 - driver class being loaded (oracle.jdbc.driver.OracleDriver)
2 - driver url (default would be something like: jdbc:oracle:thin:@127.0.0.1:1521:ORCL)
3 - You would need the oracle jdbc driver in the classpath (ojdbc14.jar) You can find that in [ORA_HOME]/jdbc/lib
If you've written your database connection using a JNDI datasource, then all you would need to change would be the configuration in your tomcat server.
Hope this helps,
evnafets

IE doesn't display navigation menus or slideshows correctly

I'm fairly new to Muse and was pretty excited for it as an alternative to using Dreamweaver all of the time but now I wish it would come with a disclaimer that the sites created with it are not compatible across all browsers.
I have a simple horizontal navigation menu that won't work in IE but appears fine in Firefox and Chrome. The slideshows on the homepage as well as the project pages doesn't display correctly either. As you can imagine, the client is none too happy. Also, the Google map widget does not work correctly in IE either.
Are there known issues with IE? Are there any fixes short of redoing the site in another program?
The URL is: www.ethosthree.com
Any help or input would be greatly appreciated. Thanks.

We are experiencing similar issues. We have used the slideshow widget in Muse on several pages and it fails to work under IE 10 or IE 11, but works fine on all current versions of Firefox, Chrome, and Safari.

Picasa Web albums: doesn't display all uploaded photos. This only happens on my desktop computer. All photos displayed on my laptop.

Not all of my uploaded photos display in my Picasa web album. All the photos upload, but 17 out of 90 photos don't display. Some are landscape, some are portrait. This is no pattern to what doesn't display (e.g., not every third photo). This only happens when I use my desktop computer. When I use my laptop, all uploaded Picasa web album photos display.

See:
* [[Images or animations do not show]]
* http://kb.mozillazine.org/Images_or_animations_do_not_load
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Power Map doesn't display in ribbon

I installed Power Maps Preview and the add-in is active, but it doesn't display in the ribbon. I unistalled the program several times and re-downloaded it, but it still does not work. Many of the discussion threads on this topic contain dead links for fixes
or don't provide much information. How have others solved this issue? I have Home Office 2013. Thanks!

That's a strange one. Run Thinkvantage System Update, or just download and install most recent PM driver and software. Maybe refreshing these will give you PM back. Otherwise, I believe you may also have a setting in the BIOS for the beep. Not in front of my X100 now, but I know I have this setting on my X60s.

"0" doesn't display before comma in float numbers...

Hi fellow APEX users,
Have you ever experienced this issue with float numbers in your APEX forms?
When I type float numbers between -1 and 1 in forms (e.g. 0,7 or -0,2), and after having submitted the form then reloaded it for editing, "0" doesn't display before the comma.
For example I got:
*,7* instead of *0,7*
-,2 instead of -0,2
etc.
If I look in SQL Workshop, I see the same (no "0") but I'm pretty sure that the value is properly recorded in the database.
The thing is that it's not very nice for the end users, as they can think the value is wrong.
Does anybody have a solution to display proper float numbers with "0" in the forms?
For info I use the NUMBER type.
Any help much appreciated!
Thanks,
Romain.
Edited by: romain.apex on Feb 5, 2012 8:30 PM

Hi Peter!
Of what type is your item? Display as text or do you use the item value for further computations.
If it is only for means of displaying the correctly formatted number, I'd change the item source to a query and would equip the desired column with a to_char function like:
select to_char(str_be_main, 'fm999G999G990D00') from yourtable where ...You could also use a post calculation computation and enforce the format there:
to_char(:P2027_YOUR_ITEM,'fm999G999G990D00')Maybe this helps!
Brgds,
Seb
Edited by: skahlert on 11.02.2011 07:53

FCP X doesn't display iMovie clips correctly in Event Library

I have 10 years of clips that are setup by year/date in iMovie. Although I had imported most of the media in 2009, iMovie seems smart enough to read the actual file metadata and find the media recording date, which is prior to the import date. As a result, the clips are diplayed correctly in iMovie Event by Year/Month of actual recording.
However, the Event Library in FCP X doesn't do that at all and lists the events by "Content Creation" date, which is simply reads from the system file date, and NOT the recording date that is embedded into the file.
Bottom line is that Event Library is semi-useless as it doesn't all at display my clisp in the correct order, unlike iMovie that was doing it correctly.
Any ideas?

I went into Finder and discovered that FCP X created a directory structure where the files are in the correct Year/Month directory structure (as an exact mirror directory structure as the iMovie one), so it's even more weird that the Event Library doesn't display the events correctly???

ColumnChart doesn't display.

Similar Messages

Maybe you are looking for