Columns and rows missing
In the corner of my table where the columns and the rows are labeled A, B, C... and 1, 2, 3.. (not where I enter information, the absolute corner) there is a square with a 3x3 grid of nine dots. I accidently clicked on it and the A, B, C, 1, 2, 3's dissapeared. and if I click in the same spot it does not comeback! I have tried selecting or unselecting everything in the "view" menu and it has not come back. I also can't seem to find anywhere that will tell me what this section is called. I opened another document and it was fine. I tried to hover over that spot with my cursor in hopes that a "label note" would pop up and tell me what it is, but nothing.
I have included a before and after image. see the box between 1 and A that has a 3x3 grid of nine dots, and now you can see that is all gone. (these are two different documents but I needed to show the difference.)
Thank you!!
Thanks Jerry,
sure wish this was easy to access in the help menu or on the web. not burried deep in a huge manual that is burried deep in the website.
For others who might read this, the corner square is called a "Table Handle"
The A, B, C row is called "Reference tab letters" and can be used to refer to columns.
The 1, 2, 3 column is called "Reference tab numbers" and can be used to refer to rows.
http://manuals.info.apple.com/en_US/Numbers09_UserGuide.pdf
Similar Messages
-
Numbers-freezing columns and rows
Can you freeze columns and rows in numbers although they are not designated as headers?
FYI I was looking for information in these old posts on the Freeze function in Numbers.
After looking through numerous posts and finally talking with an Apple Tech, we found that the freeze function was not in Number 08, but added in Number 09. We were both surprised that this basic spreadsheet function was missing from 08
With this function you can lock/freeze the top row and/or column so as you scroll through the spreadsheet, you can see you first rows or columns while looking at the data in the middle of the spreadsheet.
I am not an Apple representative, but the only way to fix this and other flaws in Number 08 is to upgrade to 09 for $19.99. Hope this helps. -
Hi all,
I'm just filling a Numbers table from a webseite per copy & paste.
Can I swap columns and rows in Numbers like in Quantrix?
AxelHere is a new transpose script.
This one inserts formulas grabbing the contents of the original block so the transposed one reflects the changes which may be done in the original block.
It's a bit long but I post it here because it introduce some handlers allowing us to acess some interesting features.
--[SCRIPT transposeLive]
Enregistrer le script en tant qu'Application ou Progiciel : transposeLive].app
déplacer l'application créée dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Merci à Scott Lindsey & Ed.Stockly du forum [email protected]
qui m'ont aidé à construire le code récupérant le bloc sélectionné.
Sélectionnez le bloc de cellules à transposer
menu Scripts > Numbers > transposeLive (exécute le script une première fois)
Le script récupère les informations utiles sur le bloc à transposer
Sélectionner la première cellule du bloc destination
(elle ne peut être dans le bloc source)
menu Scripts > Numbers > transposeLive (exécute le script une deuxième fois)
Il insère des formules récupérant le contenu du bloc transposé.
Les modifications au contenu du bloc source seront répercutées.
+++++++
Save the script as an Application or an Application Bundle: transposeLive].app
Move the newly created application into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Thanks to Scott Lindsey & Ed.Stockly from [email protected]
which helped me to build the code grabbing the selected range.
Select a group of cells.
menu Scripts > Numbers > transposeLive (Run the script once.)
It grabs infos about the selection
select the first cell of the destination
(can't be in the source range)
menu Scripts > Numbers > transposeLive (Run the script one more time.
It will insert formulas grabbing the transposed range.
Changes in the source one will be reflected.
Yvan KOENIG (Vallauris, FRANCE)
19 janvier 2009
property theApp : "Numbers"
property sourceCell : missing value
property sourceTable : missing value
property sourceSheet : missing value
property nbRows : missing value
property nbColumns : missing value
--=====
on run
set firstPass to sourceCell = missing value
if firstPass then (*
Here we are in the first pass.
We grab infos about the source range *)
set {rName, sourceTable, sourceSheet, dName} to my getSelection()
if rName is missing value then error "No selected cells"
set twoNames to my decoupe(rName, ":")
if sourceTable does not start with "'" then set sourceTable to "'" & sourceTable & "'"
if sourceSheet does not start with "'" then set sourceSheet to "'" & sourceSheet & "'"
set sourceCell to item 1 of twoNames
set {colNum1, rowNum1} to my decipher(item 1 of twoNames)
if item 2 of twoNames = item 1 of twoNames then
set {colNum2, rowNum2} to {colNum1, rowNum1}
else
set {colNum2, rowNum2} to my decipher(item 2 of twoNames)
end if
set nbRows to rowNum2 + 1 - rowNum1
set nbColumns to colNum2 + 1 - colNum1
else --**************
Here we are in the second pass
We insert formulas grabbing the transposed cells *)
set deci to character 2 of (0.5 as text)
if deci is "." then
set delim to ","
else
set delim to ";"
end if
set p2lproj to my getLproj(theApp)
set OFFSET_loc to my getLocalizedFuncName(p2lproj, "OFFSET")
--set ADDRESS_loc to my getLocalizedFuncName(p2lproj, "ADDRESS")
--set INDIRECT_loc to my getLocalizedFuncName(p2lproj, "INDIRECT")
set {rName, tName, sName, dName} to my getSelection()
if rName is missing value then error "No selected cells"
set twoNames to my decoupe(rName, ":")
set {colNum1, rowNum1} to my decipher(item 1 of twoNames)
if item 2 of twoNames = item 1 of twoNames then
set {colNum2, rowNum2} to {colNum1, rowNum1}
else
set {colNum2, rowNum2} to my decipher(item 2 of twoNames)
end if
(* Here we know the starting point of the destination area. *)
tell application theApp
activate
tell document dName to tell sheet sName to tell table tName
set rowsCible to (get row count)
set rowsNeeded to rowsCible - 1 + nbColumns
if rowsNeeded > rowsCible then
repeat (rowsNeeded - rowsCible) times
add row below row rowsCible
end repeat
end if -- rowsNeeded
set columnsCible to (get column count)
set columnsNeeded to columnsCible - 1 + nbRows
if columnsNeeded > columnsCible then
repeat (columnsNeeded - columnsCible) times
add column after column columnsCible
end repeat
end if -- columnsNeeded
repeat with i from 1 to nbRows
repeat with j from 1 to nbColumns
set value of cell (colNum1 - 1 + i) of row (rowNum1 - 1 + j) to "=" & OFFSET_loc & "(" & sourceSheet & " :: " & sourceTable & " :: " & sourceCell & delim & i - 1 & delim & j - 1 & ")"
end repeat
end repeat
end tell -- table of sheet of document
end tell -- Application
set sourceCell to missing value
set sourceTable to missing value
set sourceSheet to missing value
set nbRows to missing value
set nbColumns to missing value
end if
end run
--=====
on getSelection()
local mySelectedRanges, sheetRanges, thisRange, _, myRange, myTable, mySheet, myDoc, mySelection
tell application theApp
activate
tell document 1
set mySelectedRanges to selection range of every table of every sheet whose it is not missing value
repeat with sheetRanges in mySelectedRanges
try
count of sheetRanges
on error
set sheetRanges to {sheetRanges}
end try
repeat with thisRange in sheetRanges
if contents of thisRange is not missing value then
try
--return thisRange --poorly formed result
thisRange as text
on error errMsg number errNum
set {_, myRange, _, myTable, _, mySheet, _, myDoc} to my decoupe(errMsg, quote)
--set mySelection to (a reference to (range rn of table tn of sheet sn))
return {myRange, myTable, mySheet, myDoc}
end try
end if -- contents…
end repeat -- thisRange
end repeat -- sheetRanges
end tell -- document 1
end tell -- application
return {missing value, missing value, missing value, missing value}
end getSelection
--=====
on decipher(n)
local letters, colNum, rowNum
set letters to "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
if (character 2 of n) as text > "9" then
set colNum to (offset of (character 1 of n) in letters) * 64 + (offset of (character 2 of n) in letters)
set rowNum to (text 3 thru -1 of n) as integer
else
set colNum to offset of (character 1 of n) in letters
set rowNum to (text 2 thru -1 of n) as integer
end if
return {colNum, rowNum}
end decipher
--=====
on decoupe(t, d)
local l
set AppleScript's text item delimiters to d
set l to text items of t
set AppleScript's text item delimiters to ""
return l
end decoupe
--=====
on getLproj(a)
local lprojs, localId, lproj
set lprojs to {{"da_DK", "da.lproj"}, {"nl_NL", "Dutch.lproj"}, {"en_US", "English.lproj"}, {"fi_FI", "fi.lproj"}, {"fr_FR", "French.lproj"}, {"de_DE", "German.lproj"}, {"it_IT", "Italian.lproj"}, {"ja_JP", "Japanese.lproj"}, {"ko_KR", "ko.lproj"}, {"no_NO", "no.lproj"}, {"pl_PL", "pl.lproj"}, {"pt_BR", "pt.lproj"}, {"pt_PT", "pt_PT.lproj"}, {"ru_RU", "ru.lproj"}, {"es_ES", "Spanish.lproj"}, {"sv_SE", "sv.lproj"}, {"zf_CN", "zh_CN.lproj"}, {"zh_TW", "zh_TW.lproj"}}
set localId to my getLocale(a, "http://support.apple.com/en_US/manuals/#iwork")
set localId to text (1 + (count of "http://support.apple.com/")) thru -1 of localId
set localId to text 1 thru ((offset of "/" in localId) - 1) of localId
set lproj to ""
repeat with i from 1 to count of lprojs
if localId is item 1 of item i of lprojs then
set lproj to item 2 of item i of lprojs
exit repeat
end if
end repeat
if lproj = "" then error "A Frameworks file is missing !"
return (path to application support as text) & "iWork '09:Frameworks:SFTabular.framework:Versions:A:Resources:" & lproj
end getLproj
--=====
on getLocale(a, x)
tell application a to return localized string x
end getLocale
--=====
on getLocalizedFuncName(f, x)
return localized string x from table "Localizable" in bundle file f
end getLocalizedFuncName
--=====
--[/SCRIPT]
Yvan KOENIG (from FRANCE lundi 19 janvier 2009 18:57:48) -
How to enter a data into the specified column and row in a created table
Hi,
I want to enter some data to specified column and row in a already created table. Please let me know how to do this.
Regards
Shivakumar SinghA table is just a 2D array of strings. Keep it in a shift register and use "replace array element" to modify the desired entry programmatically.
If you want to modify it manually and directly from the front panel, make it into a control and type directly into the desired element. (In this case your program would need to write to it using a local variable).
Atttached is a simple example in LabVIEW 7.0 that shows both possibilities.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
ChangeTableEntries.vi 41 KB -
How to get the current selected column and row
Hi,
A difficult one, how do i know which column (and row would also be nice) of a JTable is selected?
e.g.
I have a JButton which is called "Edit" when i select a cell in the JTable and click the button "Edit" a new window must be visible as a form where the user can edit the a part of a row.
Then the column which was selected in the JTable must be given (so i need to know current column) and then i want the TextField (the one needed to be edited) be active with requestFocus(). So it would be
pricetextfield.requestFocus();
Problem now is that i have to click every time in the window the JTextField which was selected in the JTable. I have chosen for this way of editing because my application is multi-user and it would be too difficult for me when everybody did editing directly (catch signals, reload data, etc.).
My question is how do I know the current column and the current row in a JTable?I'm not sure what your mean by the "current" row or column, but the following utility methods return
which row and column have focus within the JTable.
public static int getFocusRow(JTable table) {
return table.getSelectionModel().getLeadSelectionIndex();
public static int getFocusColumn(JTable table) {
return table.getColumnModel().getSelectionModel().getLeadSelectionIndex();
} -
Read words from text file by delimiter as columns and rows
Hi All,
I need your help as i have a problem with reading string by delimiter. i have used various tech in java, but i can not get the result as expected.
Please help me to get the string from text file and write into excel . i have used a text file.
problem
get the below as string by delimiter
OI.ID||'|'||OI.IDSIEBEL||'|'||OI.IDTGU||'|'||OI.WORKTYPE||'|'||OI.UTR_FK
read the below as string by delimiter
"50381|TEST_7.15.2.2|09913043548|Attivazione|07-SEP-10
now i need to write the above into excel file as columns and rows.
there are 5 columns and each corresponding values
the outut excel should be
OI.ID OI.IDSIEBEL OI.IDSIEBEL OI.WORKTYPE OI.UTR_FK
50381 TEST_7.15.2.2 09913043548 Attivazione 07-SEP-10
i tried in diffrerent techinq but not able to get the resule. pls help me
Thanks,
Jasmin
Edited by: user13836688 on Jan 22, 2011 8:13 PMFirst of all, when posting code, put it between two tags.
Second of all, the pipe is a special character in regex, so you need to escape it as
.split("\ \|");
Erh. So 2 backslashes before the pipe character. Stupid forum won't post it.
Edited by: Kayaman on Jan 24, 2011 9:35 AM
Edited by: Kayaman on Jan 24, 2011 9:35 AM
Edited by: Kayaman on Jan 24, 2011 9:36 AM -
I use "element 12" and want like in the old PS version due Automating and Contact II upload multiple filesand print them with any columns and rows on the same page . How does it work?
Can you supply a link?
-
Can we hide the lines between the columns and rows of an alv in wd abap
HI all ,
I know that we can colour cell/column/row in an alv in wd abap.
but, can we hide the lines between the columns and rows of an alv in wd abap.
i have checked this link [hiding lines b/n rows and columns of an alv|http://help.sap.com/saphelp_nw04/helpdata/en/91/e7eb40c4f8712ae10000000a155106/content.htm]
but didn't understand, can please anybody provide some example or any material..? it will be very helpful.
THANK YOU.
Edited by: arfat111 on Feb 15, 2010 7:05 AMCode some like this in the WDDOINIT method of your view which defines the ALV component as used component.
instansiate the ALV component
data lo_cmp_usage type ref to if_wd_component_usage.
lo_cmp_usage = wd_this->wd_cpuse_usage_alv().
if lo_cmp_usage->has_active_component() is initial.
lo_cmp_usage->create_component().
endif.
data lo_interfacecontroller type ref to iwci_salv_wd_table.
lo_interfacecontroller = wd_this->wd_cpifc_usage_alv().
data lo_value type ref to cl_salv_wd_config_table.
lo_value = lo_interfacecontroller->get_model().
hide the grid lines
lo_value->if_salv_wd_table_settings~SET_GRID_MODE( value = '01' ).
Thanks,
Abhishek -
Avoiding zeros in columns and rows after selecting parameters
Hi,
I have a parameter on my report, after selecting certain value it shows me Zero Zero for all the columns and rows that do not satisfy the parameter selected and shows data in rows nad columns whre it is matching.
Is there any way to just avaid getting anything for the rows and columns that are not matching and just getting data rows and columns......like a compact form.
I hope I was able to explain my question.
RobinnPlease re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551 -
Increase report size (columns and rows) in portal
Hi all,
Hope someone can help me with this. I don't have any experience administering the reporting portal, hopefully this is an easy question.
The portal displaying BI queries shows only about 10 columns and 10 rows at a time. This is annoying since users have to scroll around to see all the rows and columns. Where can I adjust the number of columns and rows displayed?
Thanks,
M.Hi M.B.
Open WAD ( Bex Web Application Designer ) in which , you have assigned BI query. follow the steps for changing no of rows & columns.
Step 1. Properties - > select Web Items parametes.
Step 2. select Ananlysis
Step 3. Scroll down -> paging -> here you can change no of rows & columns.
Hope it will serve your query. If problem solved , closed this thread .
Regards,
Anand Mehrotra. -
Creating even columns and rows in flash
I need to create a grid in flash using the drawing tools. The
grid has multiple (10+) columns and rows. Other than using the
ruler and guides is there a way to ensure even spacing with columns
and rows?Create the lines for the columns and locate the two end lines
where they need to be using the Properties panel X positioning.
Then, with the remaining lines placed between the two end lines,
select all the lines and use the align tool to space them evenly.
Do similarly for the row lines, but on a separate layer. You can
move them to the column layer afterwards. -
Switch columns and rows in SSRS
Hi,
I have a report with static columns that looks something like this:
Date
Column 1
Column2
Column30
December 1
xxx
xxx
xxx
December 2
xxx
xxx
xxx
December 31
xxx
xxx
xxx
It is based on SP that produces a temporary table exactly the same way as the report output (my Dec
1 to 31 rows are details that are precalculated within SP).
I need to switch columns and rows as my report is getting too wide.
Does anyone know how it is done in SSRS 2005 (with SQL 2005 data source) without re-writing my SP?
Thank you in advance!Thank you for your reply Jason.
Unfortunately I do not have tablix within SSRS 2005; I only have matrix and table. For the original report I am using table as it displays data exactly the way it
is passed from the SP. You cannot switch columns and rows within the table. I tried matrix, but it didn’t work either… Is there any work around that you know of?
Thanks again!
Lana -
FREEZE COLUMNS AND ROWS IN WEB REPORT - PLEASE ADVISE ME
Hi Experts,
I have a web template that contains a query. My customer wants to freeze columns and rows in this report like we do in Excel. I know that in BW 3.5 this is not a standard feature of Table item. In forum I have found some messages regarding with this issue. I inserted a JavaScript code that I have found in forum, but this does not help. A codewriter wrote some other JaveScript for example alert(), that works but some part of taken code from forum such as defined functions do not work.
Other solutions advised in forum such as fixing row numbers or column numbers do not fix my problem.
My questions:
1 - In new version of BW, BI 7.0 have this issue with WAD in standard been solved?
2 - Does it really possible at the same time rows and columns to freeze? I want to freeze 2 rows from top, 2 columns from left.
Could anyone have an idea?
Best regards,
SongulHello,
This will be implemented with SPS13.
https://websmp204.sap-ag.de/~sapidb/011000358700004483762006E
And before SPS13, i frame is useful to realize what you want to do. Using 2 "Analysis" web item. and display of 1st analysis web item is restricted only thin the header of the table and the 2nd Analysis web item is used as "table". display of this "analysis" is also restricted to 10 - 30 rows.
but this consume hardware resource.
<sample>
<div style="OVERFLOW: auto; WIDTH: 1000px; HEIGHT: 20px" >
<bi:ANALYSIS_ITEM name="ANALYSIS_ITEM_2" designwidth="400" designheight="20" >
<bi:DATA_PROVIDER_REF value="DP_1" />
<bi:NEW_LINES_COUNT value="0" />
<bi:NEW_LINES_POSITION value="TOP" />
<bi:DATA_ROW_FROM value="1" />
<bi:DATA_ROW_TO value="0" />
</bi:ANALYSIS_ITEM>
</div>
<div style="OVERFLOW: auto; WIDTH: 1000px; HEIGHT: 200px" >
<bi:ANALYSIS_ITEM name="ANALYSIS_ITEM_1" designwidth="400" designheight="200" >
<bi:DATA_PROVIDER_REF value="DP_1" />
<bi:DATA_COLUMN_FROM value="1" />
<bi:DATA_ROW_TO value="0" />
</bi:ANALYSIS_ITEM>
</div>
Kind regards,
Masaaki -
Transpose columns and rows in numbers
I need to transpose columns and rows in Numbers and I do not want to write script to do it. Is there an easier way?
Give me a proper transpose and I will uninstall Excel and never look back.
Ok, here's a proper transpose, that can be placed in an Automator Service so it becomes a simple menu pick as below (and can also be assigned a keyboard shortcut).
To use it (this is slightly different from Excel) you select the range you want to transpose, choose Copy Transpose, click a destination cell in an existing table in the current document or another document, and command-v (Edit > Paste) or option-shift-command-v (Edit > Paste and Match Style).
The one-time setup is as follows. In Automator choose File > New > Service, drag a Run AppleScript action from the left into the right pane, choose 'No Input' for 'Services receives selected' and 'Numbers' for 'in'. Then paste the following into the Run AppleScript action, replacing all text already there by default:
--Transpose - select range, run, paste transposed values where wanted
try
tell application "Numbers" to tell front document to tell active sheet
set selected_table to first table whose class of selection range is range
tell selected_table
set my_selection to the selection range
set first_col to address of first column of my_selection
set last_col to address of last column of my_selection
set first_row to address of first row of my_selection
set last_row to address of last row of my_selection
set str to ""
repeat with i from first_col to last_col
repeat with j from first_row to last_row
set str to str & (value of cell j of column i of selected_table) & tab
end repeat
set str to str & return -- add line return after row
end repeat
end tell
end tell
set the clipboard to str
display notification "Ready to paste transposed values" with title "Numbers"
on error
display dialog "Select a range first and then try again"
end try
--end script
Hit the compile "hammer" and the script should indent properly. Then save the service with the name you want to appear in your menu, and it will thereafter be available via the Services menu (and keyboard shortcut, if you set one up in System Preferences > Keyboard > Shortcuts > Services).
That's it. Less then five minutes' one-time set-up work and you've got a menu pick for a transpose functionality that is as convenient as Excel's.
SG -
Setting the ALV Hierarchy tree with grid line between the columns and rows
Hi Experts,
I would like to ask if there is any suggestion on setting the ALV hierarchy tree to be separated by grid line between the columns and rows just like how it is display the same way in normal ALV grid.
Thanks in advance.Hi Lin,
The requirement which you have stated is not possible.
Lin,
Also i have a query regarding BADI ZME_PROCESS_REQ_CUST, which you had raised on SDN. You have marked the question as solved/answered.
Changing the data of a customize field in purchase requisition
Could you please let me know, the steps you did to update the screen fields through the BADI.
I would really appreciate your reply, because i am facing exactly the same problem which you have mentioned.
Thanks,
Best regards,
Prashant
Maybe you are looking for
-
Safari 5 - Lost Reopen all windows from last session
Do you know, how to make "Reopen all windows from last session" work in Safari 5? I dont have this option in History- http://tinypic.com/r/2m6lwfb/6
-
I am developing a site on Webcenter 11g using JDeveloper 11.1.1.3. This question related to content integration. My initial public facing site will have a single template that encompasses about 4-5 pages. An "about us", "careers", "contact us". I wis
-
Problem in code.it is urgent.
problem in code.it is urgent. i want to display all po,s with all grs from requistion up to inspection. if for a po gr not happend or inspection not happend it must also display leaving blank for that po. actual flow is pur.reqpur.ordergoods receipt-
-
Is it possible to use the fonts I have in my Mac Font Book with Creative Cloud software, such as Illustrator and Photoshop?
-
After importing photos from a digital camera the thumbnails are blank.
I purchased a new iMac a few months ago and had no problem with transferring (and viewing) my iPhoto library onto the new computer. However, now when I import photos from my iPhone or camera, the thumbnails are blanks (with little dotted lines around