Columns for gallery!

Hi! I'm nearly there but I can't get this scipt to work!! Its
a basic gallery I'm building that imports images via xml with
thumnails. Problem is I started trying to make columns and it wont
work! I'm nearly there though I can smell it! The Column bit is
declaired at the top and in a for statement at the bottom! Can you
take a look?
Thanks Gavin

that last bit of code can't possibly work. you're trying to
position those movieclips before they even exist.
you had it right the first time. you just need to use
numimages instead of count:

Similar Messages

The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
Cheers

Hi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..

Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

Type Column for Email is not coming in Business context

Hi All,
I have enhanced the component ICCMP_BT_BCXT.
I am able to get the required values in business context.
I get hyperlinks in the TYPE column for customer follow-up/interaction record.
But when email is sent then TYPE column does not show the hyperlink as Email.
Other details like key/description are occuring for email.
Any pointers on how to get the hyperlink for Email.
Thanks and Regards,
Gauri.

Hi,
by default when you get the hyperlink for interations record/followup document, its logical because on click on this hyperlink, system takes you to the interaction record/Followup document that is linked.
If you set it to email, and if we provide hyperlink to it, where should it navigate on click of the hyperlink ?
Its very easy to provide the hyperlink however it is very important to know what is required on click of the hyperlink, to give the right design .
Thanks & Regards
Suchita

How To Add a new column for ZPR0 price in open sales order report ??

HI,
my requirement is To Add a new column for ZPR0 price in open sales order report if the order/scheduling agreement is a cross-company code transaction l(company code of order/scheduling agreement <> company code of delivering plant), price = ZPR0 price as at estimated GI date

k

To Add a new column for ZPR0 prce in open sales order report

HI,
my requirement is To Add a new column for ZPR0 prce in open sales order report if the order/scheduling agreement is a cross-company code transaction l(company code of order/scheduling agreement <> company code of delivering plant), price = ZPR0 price as at estimated GI date

HI,
my requirement is To Add a new column for ZPR0 prce in open sales order report if the order/scheduling agreement is a cross-company code transaction l(company code of order/scheduling agreement <> company code of delivering plant), price = ZPR0 price as at estimated GI date

ALV report shows fixed number of columns for a user ?

Hello,
I have an issue wherein I have created an ABAP ALV grid display in a WD ABAP application and hosted it onto portal. Now, all the users can see the correct number of columns for the report which are determined dynamically. But just for one user, irrespective of which report she launches it shows her only 4 columns.
Can anybody suggest why this kind of behavior.
Appreciate your help.
Regards,
Samta.

Hi,
Right, click the button "manage layout" or "save layout" and remove any default user settings...
added: didn't read carefully sorry ;)... better check user settings in SU01 if no ALV parameter is used.
Kr,
m.
Edited by: Manu D'Haeyer on Oct 21, 2011 8:53 PM

F-53 and F-28, Customized columns for cash discount and %

Hi Expert,
With reference to the subject of: Customized columns for cash discount and % ...
I faced the problem of not able to set / defined hidden column for cash discount and % by creating a new variant.
Steps:
Create a variant
Click <administrator> button ... mark the columns hidden, and click <activate> button
Then click <Save> button
Problem: Every time I using the F-53/F-28, the layout is not working, and when goto check the variant settings, the cash discount and % columns remained unchecked.
SAP version: 4.6
Kindly advise.
Thanks and regards,
sbmel

Hi JP,
It is not working using field status group, as I am using F-53 and F-28 and not FB50/60/70.
The purpose I want to create variant for screen after clicking <process open item> is to control column display (hide cash discount and %). if the variant is working, I can create a customized Tcode for the F-53 and F-28.
Now problem is that variant seem not working.
Thanks and regards,
sbmel

Report with multiple choice in column for same dimension......

Hi All,
We have a report with two dimensions in col , one in row remaining in pov...user want to select multiple members [its more than 10 members..so we thought prompts will not be good.] for one column for different members in second dimension of column and want see the variance between them.
can anyone suggest me how can i achieve this. thank you
regards,
Ravi

Hi All,
Can any one suggest me on this. thanks inadvance.
Regards,
Ravi

HOW TO: Add /manipulate columns for a GridControl

HOW TO: Add /manipulate columns for a GridControl when the columns (attributes) are from different entity objects.
This HOWTO describes the basic steps of using attributes from different entity objects for a GridControl.
One way you can create a GridControl which contain attributes from different entity objects is to create a view object and base it on the entity objects which contain
the desired attributes.
Here are the basic steps:
1.Create a new view object (or use an existing view object) by selecting File>New from the menu, clicking the Business Components tab and double-clicking
on the View Object icon.
2.In the View Object wizard change the name to something meaningful.
3.Select the entity objects you will base your view object on.
4.Nivigate to the attribute screen and select the attributes you would like to include in your view object from each entity object. At this point you can also create
a new attribute by clicking the "New" button. The new attribute can be a concatenation of other attributes, derived from a calculation etc.
5.In the query panel of the View Object wizard, click "Expert mode" and enter a query statement. You write complex queries such as decoding a set of attribute
values.
6.Add your newly to your newly created view object to the application module by double-clicking on the application module in the navigation pane and selecting
your view object from the list.
7.Create a new row set.
8.Bind row set to a query by editing their queryinfo property and selecting your view object and its attributes from the queryInfo pane.
9.Create a GridControl and bind it to the row set by editing the dataItemName property of the GridControl. Since the GridControl is bound at the row set level
all of the related attributes are automatically added.
null

Michael,
Are you intending this as a commercial solution or a work around?
To take an existing equivalent, one would build a view in the database tailored for each grid in an Oracle Forms application. Or a separate query layered over tables for each form/grid in a Delphi or Access application? Even if it is ninety nine percent the same over half a dozen forms/grids?
And now you've added a whole slew of "slightly different" rowSetInfos to maintain.
So if you wanted to add a column that needs to appear everywhere... you've just increased the workload multi-fold?
That would be a management nightmare, wouldn't it? Not to mention yet more performance cost and a slower system?
Hmmmm..... I'm not sure I like where this is headed... someone needs to do some convincing...
null

How to add a default value in a site column for every item in a document library

HI
i created a content type with some site columns ,
and included in a Document library.
Process ( content type)
-ProcessNo
-ProcessName
after that i uploaded 100 Documents but not added value in a site column process name.
now how i add a default value in a site column for every document in a document library
adil

HI
i get below error when i change the script
PS C:\scripts> C:\Scripts\updatedefaultvalue.ps1
Cannot index into a null array.
At C:\Scripts\updatedefaultvalue.ps1:8 char:7
+ IF($i[ <<<< "Title"] -eq $null)
+ CategoryInfo : InvalidOperation: (Title:String) [], RuntimeExce
ption
+ FullyQualifiedErrorId : NullArray
$web = Get-SPWeb http://tspmcwfe:89/
$list = $web.Lists["test"]
$item = $list.Items | Where { $_["Name"] -eq "Emc" }
foreach($i in $items)
IF($i["Title"] -eq $null)
$i["Title"] = "test"
$i.Update()
adil
Why are you piping a where in the items? Do you only want to add the "test" to ones matching
a name?
If you have ISE installed on your server I recommend you put your code in there and debug it.
If this is helpful please mark it so. Also if this solved your problem mark as answer.

Creating a new Column for my list Versus adding it from existing site columns, when to use each approach

I have created a new issue tracking list inside SharePoint 2013 team site. And it comes with predefined columns, some of them are useful while the other are not . Can anyone help me in figuring out the following:-
The list come with a field named “Assigned To”, while in my case I want a column named “Approver”. So what is preferred , to re-name the “Assumed to ”column to “Approver”, or create new field name “Approver”.?.
If I rename an existing column, could this be overridden in any future updates for my SharePoint server?
Now we want to add a column named “Office location”.so I need to create a new field for this. But seems there are two ways to do so either to add a new Site Column at the site level and then assign it to the list as follow :-
, or to directly adding a column to the list, even if it is not available in the site columns , as follow:-
So what are the differences between the two approaches ? .if I am not wrong defining a site column will allow me to re-use it in another list , but defining the column at the list level, will allow me to add a column even if it is already defined as site
column.
So can anyone advice on my three questions please? Thanks

1) 'Assigned to' has a different meaning then 'Approver' , it will be better if you create a new field for 'Approver'. Assigned to is a Site Column which has managed property for search, so it will be confusing type of data it will return from search in
future.
2) Any rename of fields should not / and will not get modified in SharePoint updates. So, you can rename is without any issue since the internal name will remain the same. But its always better to create your own custom column for business use.
3) Creating a site column or not depends upon your need, If you create a Site Column - in whole site collection you will be able to add this field in any list - It will be crawled, SharePoint will automatically provide managed property for site column and
you will be able to get this value via search. These things will not be present in list column, you will need to do specific settings in case its required.
If these things are needed then you can go for Site Column, usually its good to create a Site Column and use it.
For Site Columns you can check following links
Introduction to Columns
From site column to managed property - What's up with that?
Create a site column
get2pallav
Please click "Propose As Answer" if this post solves your problem or "Vote As Helpful" if this post has been useful to you.
thanks a lot for your reply it is really helpful. so as i understand that using site columns will be better in most cases, and there is not any specific reason for not using it? is this right ?
Second question, do u mean that if i have a list column named "Serial number", then this column will not be searched ? For example if i have serial number such as "12345" and i try searching this text "12345" i will not get
the item in my search ?
Thanks

Add a new column for WBS description

Hi all
how to Add a new column for WBS description and derive the value as per the FS
anybody can provide document for this

Hi ,
In Table PRPS, alread you have short description field POST1 and POSTU for the WBS element, apart from that still if you want to include a feild for your own requirement , then create a structure and with the description field of your requirement and append that structure into PRPS table.
Hope This Info Helps YOU.
Reward Points If It Helps YOU.
Regards,
Raghav

Unable to find mapping Interface columns for Service Items in Sales Order

Hi All,
I have a requirement to create a service item for a Sales Order through Interface tables. Once the oe_headers_iface_all and oe_lines_iface_all tables are populated, order import program is run to populate the data into the base tables.
I am unable to figure out the interface mapping columns for the base table columns namely,
(oe_order_lines_all table)
service_ref_order_type
service_ref_order_numbe
service_ref_line_number
service_ref_shipment_number
Also, the above mentioned base table columns are mandatory and not able to create a Service item through Order import.
When checked in the front end, per record history these columns are taken from oe_order_lines_v, however when checked in the query of this view am unable to trace the above four columns.
Any help will be greatly appreciated.
Thanks,
Jay

This does not appear to be connected with the subject of this forum, which is [Oracle Application Express|http://apex.oracle.com/i/index.html].
Taking a wild guess, this might have something to do with [eBusiness Suite|http://forums.oracle.com/forums/category.jspa?categoryID=3]?

KMTL - How to add Column for OVER DUE DAYS in report

Dear Concern,
We are Microsoft Dynamics NAV 2013 users, We want a little change on Reminder Report (In report there is due date we inserted column for OVER DUE DAYS right side to Due Date column in we required Expression of which type of formula that
shows us the Over Due Days for particular.
Please every one confirm or suggest for this error.
Thanks & regards,
Laxman Sonar

Hi Laxman Sonar,
Per my understanding that you have an date field(Due Date) in the report and now you want to get the over due days based on this field and display at right of the date field in the report, right?
I have tested on my local environment that we have two method to do this, one is to add the datediff functon in the query to get the overdue days and another method is to using expression in the report.
Details information below for your reference:
Method one:
Modify the query as below to get the new field(OverDue Days):
SELECT DueDate, DATEDIFF(day, DueDate, GETDATE()) AS OverDueDays
FROM tableName
Method Two:
Add an calculated fields and then add the expression below to get the value for this field or just add expression directly in the new field:
=Datediff("d",Fields!DueDate.Value,Today())
If your problem still exists, please try to provide us some sample date and more details information about your requirements.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Columns for gallery!

Similar Messages

Maybe you are looking for