Com.adobe.ProcessingException: Requested update ZCI-003 could not be found.

Hi
Please assist with the following ADS call error as per webdynpro application dump for an adobe interactive form.
The dump happens on drop downs and buttons on the form. The ADS is on Netweaver 7.01 EHP1. The layout on the form is ZCI but the script has not been manually inserted. The form works perfectly on the Development and QA environments but dumps in production with the error below. 
WebDynpro Exception: ADS call failed ADS: com.adobe.ProcessingException:
com.adobe.ProcessingException: Requested update ZCI-003 could not be
found.(200,101).
Kind Regards,
Michael Mayisana.

Hi Michael,
Seems the ADS is working fine for non-interactive forms but the problem persists for interactive forms only.
As per my understanding a separate license or credential file for Interactive forms is required to be configured at ADS level by your basis team.
Check report: FP_TEST_00 and FP_TEST_IA_01.
Report FP_TEST_IA_01 should be working fine if you want to run ADS to generate interactive forms.
Please check with your basis team if credential is the issue.
Regards,
Vaibhav

Similar Messages

  • "The iPod ... could not be updated because it could not be found" on Mac?

    I just updated to the latest version of QuickTime and was notified that there was a new iPod update but when I try to update it I get the message:
    "The iPod "My Name's iPod" could not be updated because it could not be found."
    I tried to remove the iPod Software Update folder, but that didn't work.
    I also tried to restore the iPod too, but I got the same error message??
    I see documents for Windows on this error message about the firmware being corrup bug not for Macs.
    What's going on??

    Well, back again... a new iTunes and QuickTime update via Software Update and it got my iTunes in the same state again after the web installation. DOH! I reinstalled both QT and iTunes again to fix the issue again. I can't be the only one that this is happening to so just reiterate the fix works but that I'm beginning not to trust the Software Update versions of the installers for QT and iTunes. There IS a difference and it's a buggy result of not being able to find the iPod afterward. Next time I get the prompt to update I'm going to refuse and then download it from the website.

  • Yahoo mail starts to open an email (I can see the content) but then a message comes up saying "Whoops! The page could not be found. Try giving it another chanc"

    When i am in Yahoo mail and am opening on an email to open, the email starts to open (I can see the content of the email for a second) and then I get a screen with a message that states 'Whoops! The page could not be found. Try giving it another chance below'. But the email had been there so I don't understand that is happening. This just stated happening about a week or two ago. There is a search bar in the center of the screen and at the bottom of the error page is the following.
    Contact us | Why did I get this page?
    © 2012 Conduit

    Make sure that you access the Yahoo mail page via the Yahoo home page and not via a bookmarked link to a specific page.<br />
    The latter may include POST or GET data that is no longer valid.
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    You can also check for issues caused by extensions.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Adobe Air Error - Initial Content Could Not Be Found

    Hi,
    I'm using BBC iplayer desktop and trying to download programmes.  I keep getting an Adobe Air Error saying 'initial content could not be found for this application'.  I've uninstalled and reinstalled Adobe Air but keep getting this message.  Any ideas?
    Thanks,
    Maggie

    I have After Effects CS4 and my operating system Snow Leopard.
    When I mean it doesn't work, I mean it won't load up when after it pulls up that error message. I'll click on the After Effects icon, it'll load as usual, then it'll pull up that error message.
    After Effects warning: a compressor used in an output module template could not be found. The animation compressor will be used instead. ( 44 :: 18 )
    I click okay, it closes, and then I have an error saying that Adobe After Effects has crashed.

  • Data source executive could not be found

    Hello there, I have recentley did my first dynamic website
    using coldfusion MX 7. After I uploaded all the files in the server
    of godaddy.com on a window platform which supports cfm, I had
    realised that all the DSN routes were still
    C:cfusion7\wwwroot\database\executive.Users... so I changed all the
    tags to D:\Hosting\executivemalta\database\executive.Users....
    Unfortunatley I keep on receiving the error Data source executive
    could not be found! I have also created an access database from the
    godaddy control panel and located the database to a folder called
    accesscf and changed the DSN route as instructed by godaddy.
    Unfortunatley that didn't even work. Could somebody out there be
    generous enough to help me solve this problem? The following is the
    error:
    Error Occurred While Processing Request
    Data source executive could not be found.
    The error occurred in D:\Hosting\executivemalta\index2.cfm:
    line 4
    2 : <cfset MM_redirectLoginSuccess="../homepage.cfm">
    3 : <cfset MM_redirectLoginFailed="../failed.cfm">
    4 : <cfquery name="MM_rsUser"
    datasource="#Request.DSN#">
    5 : SELECT Username,Password FROM
    D:\Hosting\executivemalta\accesscf\executive.Users WHERE
    Username='#FORM.username#' AND Password='#FORM.password#'
    6 : </cfquery>
    DATASOURCE executive
    Please try the following:
    Check the ColdFusion documentation to verify that you are
    using the correct syntax.
    Search the Knowledge Base to find a solution to your problem.
    Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1;
    SV1; .NET CLR 1.1.4322)
    Remote Address 212.56.128.21
    Referrer
    http://www.the-executive.biz/index2.cfm
    Date/Time 08-Aug-06 11:17 PM
    Stack Trace (click to expand)
    at
    cfindex22ecfm807111997.runPage(D:\Hosting\executivemalta\index2.cfm:4)
    at
    cfindex22ecfm807111997.runPage(D:\Hosting\executivemalta\index2.cfm:4)
    java.sql.SQLException: Data source "executive" not found.
    at coldfusion.sql.DataSrcImpl.validate(DataSrcImpl.java:90)
    at coldfusion.sql.SqlImpl.validate(SqlImpl.java:203)
    at
    coldfusion.tagext.sql.QueryTag.doStartTag(QueryTag.java:443)
    at
    cfindex22ecfm807111997.runPage(D:\Hosting\executivemalta\index2.cfm:4)
    at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152)
    at
    coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:343)
    at
    coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
    at
    coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:210)
    at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
    at
    coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:50)
    at
    coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
    at
    coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
    at
    coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
    at
    coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
    at coldfusion.CfmServlet.service(CfmServlet.java:105)
    at
    coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
    at
    jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
    at
    jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
    at
    jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
    at
    jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527)
    at
    jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
    at
    jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:349)
    at
    jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:457)
    at
    jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:295)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

    Hi,
    I updated Sources\SXS with fresh files and now it looks like it works?????
    /SaiTech

  • Vs2013 entityframework.dll could not be found

    I updated VS2013 to VS2013 Update 4, and Entity Framework broke.  My error message is the same as others I've seen with the same problem but NONE of the suggested fixes work:
    Error 2
    Compiling transformation: Metadata file 'C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\Extensions\Microsoft\Entity Framework Tools\NuGet Packages\..\IDE\EntityFramework.dll' could not be found
    d:\users\allen\documents\visual studio 2013\Projects\WebApplication8\WebApplication8\Models\Model1.tt
    1 1
    WebApplication8
    I'm running Win 7 Pro. I have VS2012 current and runnning and NO PROBLEMS with Entity Framework. Notice that it's seeking the dll on C.  I've made every attempt to install this on D, as C is a rather smallish SSD.  Somehow, the system variables
    have been set to C and no matter how many times I reset the registry, uninstall and reinstall both VS2013 and EF6.1.3. I've used Nuget and it does install the dll in the project location but on BUILD it errors out.
    I'd appreciate any suggestions on how to move forward. 
    BTW: the current system variable VS120COMNTOOLS is being set to C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\Extensions\Microsoft\Entity Framework Tools\NuGet Packages\  
    which DOES NOT EXIST! This little section of the above error message "Packages\..\IDE\Entity" may be where the wheels fall off. No matter where I put a valid dll, I can't get the "Packages\..\IDE\Entity"
    the ".." figured out.
    Thanks.
    Allen

    Hello Allen,
    May I know some more details about what you have tried?
    Have you tried to use /force when uninstall Visual Studio and have you refered to the following article:
    https://support.microsoft.com/en-us/kb/2771441?wa=wsignin1.0
    It is for Visual Studio 2012 but Visual Studio 2013 can still use the article. As it has mentioned, just remove Visual Studio from control panel will not clear all settings due to those shared components. So if you want to completely remove VS and change
    the path, you need to remove those shared components.
    What's more, have you ever tried the solution from the following thread:
    http://stackoverflow.com/questions/10950638/the-referenced-component-entityframework-could-not-be-found
    "Allow NuGet to download missing packages during build" may help you download content to the location it required. Maybe it will helps on this issue.
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • "File could not be found"

    Hi!  I have been trying to figure out what's going on here.  Some files (not all files or all file types) are not opening properly.  I get the following message:
    "Could not complete your request because the file could not be found."
    This is happening more often with more files.   I don't think that the files are corrupt, as I can re-create the files and I still get the same error message.  Also, it is happening inconsitantly in terms of location, file type, and file names.  I tried deleting the prefernces for Photoshop to no avail.  The files are on the harddrive that Photoshop is on, so it is not a virtual harddrive which has lost connection.
    Any suggestions?
    Thanks in advance.

    It probably seems really clear to you what you're doing, but keep in mind none of us are sitting with you watching what you're doing...
    Please list the steps you are taking, so that rather than assuming you're starting Photoshop and doing File - Open, or maybe right-clicking the image in Bridge and opening in Photoshop, or maybe double clicking the image in Explorer, or whatever, we can know where you're seeing problems.
    Please list the exact steps you're taking.
    Please list the exact error message you're seeing.  Ideally grab the screen showing the error just when it happens and post it here as a  JPEG.
    -Noel

  • "required file could not be found" message?

    I had pictures on my ipod touch and somehow they got taken off. I tried to sync them back onto my ipod and an error message comes up and says "the required file could not be found." i have checked in my pictures on my computer and the folder that I have all of the pictures I want in it and it is there. how can i fix this?
    Miek Rotch

    If you have moved the file that had the pix in it to a different spot, you will have to choose the file again under the iPod photo syncing option on iTunes. Otherwise, I don't know what to do...
    Hope that helped you..
    -Messymeese

  • IMLib could not be found

    I tried to package authorware files for the Mac. On the Mac I
    used the packager to convert PC authorware to Mac. It seemed to
    work. When I run the file it comes up with and error saying IMLib
    could not be found.
    Sorry, I don't use Macs. Is this an error to do with my Mac,
    or with my authorware conversion process?
    Thanks in advance
    Jon

    Look here
    http://www.gantekmultimedia.com/download.htm
    in the Tips and
    Tricks section for Mac Packaging Bits & Bites.
    "webacity" <[email protected]> wrote in
    message
    news:eptcgb$q5g$[email protected]..
    > HI
    >
    > I managed to find some files on the mac, and put them in
    the same folder
    > as
    > the apm file. This seemed to work. However I getr XCMD
    not found, but if I
    > click on this, I get my CAL application appear. What I
    notice is that the
    > font
    > is very small. Initially I thought this was not a
    problem, but I realised
    > that
    > things like hotpspots are no longer aligned correctly
    with the text as a
    > result
    > Any solutions?
    > Apologies, but I'm not a mac user
    > thanks
    >
    > Jon
    >

  • Flash Player plugin.exe could not be found

    Hi,
    since a few days Flash Player is giving me an error message saying "C:\Users\Username\AppData\Roaming\Adobe\Flash Player\Addons\plugin.exe could not be found.
    Please make sure you have typed the name correctly and repeat the process." on every bootup. (error message may not be 100% accurate, I had to translate it from German).
    Apart from that, the Flash Player plugin (most current version btw) is working perfectly fine. I have done a complete Flash Player + Flash plugin reinstall but I keep getting the error
    every time I start my PC. What's going on here?
    Oh and I'm running Win 7 x64 Service Pack 1 btw.

    Download and save the uninstaller by right clicking the following link and selecting "save target as" (IE) or "Save Link as" (Firefox).
    Flash Player Uninstaller
    Download the Adobe Flash Player installer directly by right clicking one (or both) of the following links and selecting "Save target as" (IE) or "save Link as" (Firefox).
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)
    Save the file(s) to your downloads folder - DO NOT run anything yet.
    Reboot your system.
    BEFORE opening anything else, run the UNINSTALLER to remove ALL instances fo Flash Player plugin.
    Run the installer(s) next to replace the plugin for IE or Firefox (or both).

  • ADS com.adobe.ProcessingException : Could not retrieve credential for alias

    Hi,
    I have configured ADS in NW730 EP system which is connected to ECC 6.0 system.
    When i perform the configuration tests in SA38 as per note 944221 ,
    i get the following error when executing FP_TEST_IA_01
    ADS com.adobe.ProcessingException : Could not retrieve credential for alias : ReadersRights(200.101)
    I have installed the credentials in the \usr\sap\<SID>\SYS\global\AdobeDocumentServices\TrustManagerService\trust\credentials
    Please help me with the situation

    Hi Florian,
    In my case the NW is 731. In NWA / Configuration / Infrastructure / Adobe Document Services / Documento Security, I put the pfx file through Manage P12 files... After this I added ReaderRights Alias and password that SAP sent me with pfx file.
    But after configured this alert message appear:
    "Could not retrieve the expiry date of the selected credential. This means that either the entered password is incorrect, or no JCE (unrestricted version) installation is available. See SAP note 1294782 for further details"
    I think that this is my problem. I think that because this message that FP_TEST_IA_01 report doesn't run. I've already updated JCE files and password is correct because SAP sent me.
    Regards,
    Alexandre

  • Requested extension com.adobe.ane.productStore could not be found

    I have a FLEX Mobile project.  I have tried several FLEX and AIR SDK.  I am currently using FLEX 4.6.0 and AIRSDK 15.0 that I downloaded from Adobe.  I have added "Product Store.ane" to my build path.  The ane file was downloaded from Adobe as part of Adobe Gaming SDK 1.4.  I can import com.adobe.and.prodictStore in my actionscript code.  My application description file contains the following:
    <extensions>
            <extensionID>com.adobe.ane.productStore</extensionID>
    </extensions>
    Why do I get the Requested extension com.adobe.ane.productStore could not be found error when I try to run my application?
    Thanks.

    This information might be useful to you if you're trying to build Captivate widgets:
    http://www.infosemantics.com.au/widgetfactory/info
    Most Cp widget developer in the world do NOT use the Adobe widget templates.  They use WidgetFactory.

  • Error ADS: com.adobe.ProcessingException:Could not retrieve(200101)getting

    Hi,
    In our development system CD2(ECC backend system) when I am acessing t-code PHAP_CATALOG_PA->Category Group/Category/Template>Zero Harm>DRA JKSW2>Preview --->Print Layout giving below error.Here PD7( Dev portal ) is acting as frontend.
    Error :
    ADS: com.adobe.ProcessingException: Could not retrieve(200101)
    Message no. FPRUNX001
    Diagnosis
    An error occurred when Adobe Document Services (ADS) was launched.
    System Response
    Error message
    Procedure
    When troubleshooting, follow the steps described in SAP Note 944221.
    First check the connection to ADS. You can use the program FP_PDF_TEST_00 to do this. From SAP NetWeaver Release 7.0, the program FP_CHECK_DESTINATION_SERVICE must also run successfully (both with and without the checkbox selected on the selection screen). If this program does not run successfully, there is a error in the configuration.
    Please help in this case.
    Regards
    Nilesh

    Hi,
    Perform the ADS configuration check as specified in : http://help.sap.com/saphelp_nwmobile71/helpdata/en/43/f0638873b56bede10000000a11466f/frameset.htm
    You need to check all the configuration steps to makesure everything is setup right. Also, try after restarting your Java engine where ADS is installed. Check your ADS RFC connection using SM59 tcode, and check whether ADSUSER and ADS_AGENT are not locked.
    Try and let know.
    Regards,
    Shahid.

  • ADS: com.adobe.ProcessingException: PDF is not interactive

    Hi All,
    I have a ECC 6.0 ABAP SP12Stack installation and a seperate NW04s SP13 Portal installation. I have done all the configuration steps of ADS integration on those 2 systems.
    I developed a WebDynpro application and used the interactive form object referring to a simple  Adobe form created with transaction SFP. As I test the Webdynpro ABAP application I get the following error "ADS: com.adobe.ProcessingException: PDF is not interactive.  Data can only be imported into interactive forms.(201501)" in UPDATE_PDF method of class CL_WD_ADOBE_SERVICES. Do you have any idea for the reason of this error?
    Best Regards,

    Hi.
    Can it be applied to AS Java version too? Our system was updated from SPS12 to SPS16, and the following problem comes up:
    com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Processing exception during a "MergeData" operation.
    Request start time: Wed Oct 08 16:49:20 BRT 2008 com.adobe.ProcessingException: PDF is not interactive. Data can only be
    imported into interactive forms. Exception Stack Trace: com.adobe.ProcessingException: PDF is not interactive. Data can only be
    imported into interactive forms. at com.adobe.ads.remote.EJB_PDFAgent.importFormData(Unknown Source) at
    com.adobe.ads.operation.MergeData.execute(Unknown Source) at com.adobe.ads.operation.ADSOperation.doWork(Unknown
    Source) at com.adobe.ads.request.Request.processOperations(Unknown Source) at com.adobe.ads.request.Request.process
    (Unknown Source) at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source) at
    com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source) at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120) at
    sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke
    (NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at
    java.lang.reflect.Method.invoke(Method.java:324) at
    com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126) at
    com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157) at
    com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79) at
    com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92) at
    SoapServlet.doPost(SoapServlet.java:51) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at
    javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet
    (HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) at
    com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) at
    com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) at
    com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) at
    com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at
    com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) at
    com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process
    (ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run
    (MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at
    java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute
    (SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
        at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:400)
        at com.sap.tc.webdynpro.pdfobject.core.PDFObject.inputPDF(PDFObject.java:4003)
        at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInputPDFHandler.handle(PDFDocumentInputPDFHandler.java:139)
        at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:52)
        at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInteractiveFormHandlingContext.execute(PDFDocumentInteractiveFormHandlingContext.java:100)
    The Interactive Form was working well before the update. As soon as we set our patched Web Dynpro development environment to use an ADS not yet patched, it works perfectly.
    Regards,
    Douglas Frankenberger

  • Error Info... FPRUNX 001: ADS: com.adobe.ProcessingException:

    Anyone every run into this error after saving a PO?
    Error Info...   FPRUNX 001: ADS: com.adobe.ProcessingException: com.adobe.Processin
    The full message is:
    System ID....   PR3
    Client.......   100
    User.........  ELBURGD
    Transaction..   ME21N
    Update key...   4EC42600E07900E1E10080000A14402B
    Generated....   17.11.2011, 06:09:20
    Completed....   17.11.2011, 06:09:24
    Error Info...   FPRUNX 001: ADS: com.adobe.ProcessingException: com.adobe.Processin
    Using SM13 it says:
    Function Module:  RV_MESSAGE_UPDATE
    Status:                  Update was Terminated
    Class:                   FPRUNX      Number: 001
    FPRUNX 001: ADS: com.adobe.ProcessingException: com.adobe.Processin
    This happens seemingly randomly in production after the user saves a PO.  They'll create a PO, save it, get the PO number , start a new PO and a message box pops up saying: 
    Express document 'Update was terminated' received from author 'xxxx xxxxx'
    If the user goes back to the PO to look it up, the PO does not exist.  If the user creates a new PO (or recreates the one that failed to commit to the database), it'll save with no trouble... same print settings, same everything.  This leads me to believe the problem isn't with the PO form but with the ADS.  The PO form is custom and works without error in dev and QA.  I do believe the users are setting the message options to Print Immediately.
    I am unable to recreate the problem in dev or QA, and it appears randomly in production.  I've run the ADS test programs in production and they come back without errors.
    Has anyone run into this before?  Are there some settings on the ADS that might need to be adjusted?  I don't think this is form related since we're able to recreate the same PO and save without error immediately afterwards, but could this be a form problem?
    I am open to any and all experiences you've encounted, and any suggestions you may have.
    Jeff Kulbeth

    Recently I had the same error with Adobe Form. In my case there were a few problems regarding data binding and data format. In a Form there was unresolved data binding warning and data format mismatch with one field - Form interface contained variable of type decimal and in the Form content that variable was bound to the field of type numeric with data format integer. Adobe Form with such kind of issues can be activated without errors but during Form call you get error FPRUNX001
    So my advice would be to consider things like:
    Resolve data binding warnings. Its in the Report palette witch by default is located in the bottom left corner of the vertical palettes bar.
    Check that Form interface data types match with Form content fields data formats in data binding sub-menu.
    Also in your Form calling application you can trace ADS by using these function modules:
    FP_GET_LAST_ADS_ERRSTR - provides texts about the cause of the error
    FP_GET_LAST_ADS_TRACE - provides a trace of the Adobe document services

Maybe you are looking for