Com.apple.DotMacSync.client.exe error message

Error message "com.apple.DotMacSync.client.exe" keeps being displayed. Message content reads "The procedure obj_exception_try_enter could not be located in the dynamic link library". I have installed the latest iTunes

Hi Turingtest2!
You seem to be the go-to guy with these types of errors. I'm quite impressed by your thoroughness! My error began showing up a few weeks ago when I updated iTunes to 11.1.5.5. The error doesn't seem to get in the way of iTunes working, or my syncing Windows XP / iPhone, but this error message pops up every 10 minutes or so with a loud "don't do that!" noise, which is mildly irritating and I'd love for it to go away.
Error: com.apple.DotMacSync.client.exe Entry Point Not Found. X The procedure entry point objc_exception_try_enter could not be located in the dynamic link library obj.dll
This seems to be a bit different from other users, but perhaps the same response - to uninstall your list of programs and reinstall iTunes is the best strategy?
Thanks Turingtest2 - like your photo by the way.
Renee (somewhat lost in rural Minnesota...)

Similar Messages

Com.apple.DotMacSync.client.exe consumes most of CPU

Periodically com.apple.DotMacSync.client.exe runs when I have iTunes running. While it runs it consumes most of the CPU in the computer. This is hard on any other program that is running. How can I reduce this effect ?

Hi Turingtest2!
You seem to be the go-to guy with these types of errors. I'm quite impressed by your thoroughness! My error began showing up a few weeks ago when I updated iTunes to 11.1.5.5. The error doesn't seem to get in the way of iTunes working, or my syncing Windows XP / iPhone, but this error message pops up every 10 minutes or so with a loud "don't do that!" noise, which is mildly irritating and I'd love for it to go away.
Error: com.apple.DotMacSync.client.exe Entry Point Not Found. X The procedure entry point objc_exception_try_enter could not be located in the dynamic link library obj.dll
This seems to be a bit different from other users, but perhaps the same response - to uninstall your list of programs and reinstall iTunes is the best strategy?
Thanks Turingtest2 - like your photo by the way.
Renee (somewhat lost in rural Minnesota...)

Crash of com.apple.Outlook.client.exe

Hello
we have a new Toshiba with windows 7 and outlook 2003.
Tried to sync with an iPhone 3GS
It tells in iTunes it synced succesfully; but in the background the "com.apple.Outlook.client.exe" crashes.
Outlook then tells me it cannot access the calendar/contacts because it cannot access the folders because a process accessing the folder crashed.
Quit outlook and reopen it again brings it back.
errors are (translated from German):
Name of faulty application : com.apple.Outlook.client.exe, Version: 17.89.0.10, timestamp: 0x4cb91bf4
Name of faulty moduls: mspst32.dll, Version: 11.0.8317.0, timestamp: 0x4ae0c06f
exception: 0xc0000005
Error-offset: 0x0001e58b
ID of faulty Process: 0x1984
starttime of faulty application: 0x01cbbbd0218270f5
path of faulty application: C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\com.apple.Outlook.client.exe
path of faulty module: C:\Program Files (x86)\Common Files\SYSTEM\MSMAPI\1031\mspst32.dll
what can be done except:
- installed all updates (win and office)
- installed itunes a new
- rename mspst32.dll to mspst32-old.dll (got a new one with the same data)
greets,
Jack

I have a similar problem. I don't sync with outlook though, (I just sync with exchange server wirelessly). However, when iTunes starts, com.apple.outlook.client.exe uses alot of resources and I can't open any MS Office documents.
I close iTunes, process still runs, documents don't open. I highlight it and "end process" and all the documents I was trying to open pop up.
So far I haven't seen any effect of ending that process after iTunes is closed. I can't promise anything though. But it worked for me.
I'd like to see it fixed though, kind of a pain to have to do that.

Com.apple.outlook.client.exe CPU usage

On my laptop com.apple.outlook.client.exe always starts when I plug in my iPhone and sync it with itunes. It uses around 50% CPU and using my battery although I don't synchronize my iPhone with Outlook. Is there a way to avoid this? The process keeps running even after I have closed iTunes and disconnected the phone.
I am using Windows 7 64 bit with the latest iTunes version.

Same here on a Win XP with newest iTunes 10.5.1.42. Since I have this new iTunes, the "com.apple.outlook.client.exe" is accessing my harddisk constantly (although I only need the Notes to be synced with Outlook) and also when iTunes and Outlook are closed. Has someone a hint?

Multiple instances com.apple.outlook.client.exe *32 during Outlook sync

First, specs:
Windows 7 64bit
Norton 360
Outlook 2010 Beta
iPhone 3GS (iOS 4)
iTunes 9.2.0.61
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
NVIDIA 132-CK-NF78
iTunes 9.2.0.61
QuickTime 7.6.6
FairPlay 1.8.20
Apple Application Support 1.3
iPod Updater Library 9.2d4
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.1.0.62
Apple Mobile Device Driver 1.49.0.0
Bonjour 2.0.2.0 (214.3)
iTunes Serial Number BC49453253087E71
Current user is not an administrator.
The current local date and time is 2010-06-22 16:22:25.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GTX 260
** External Plug-ins Information **
No external plug-ins installed.
Genius ID: 23fbe8aec176fa95f0b481c13800b05c
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {9FC31319-2E36-4431-9FB0-EBBA27A93A9D}
Description: NVIDIA nForce Networking Controller #2
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Adapter Name: {234CF460-8AE3-42AF-8CE1-A7369FDDADFD}
Description: NVIDIA nForce Networking Controller
IP Address: 192.168.1.101
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254
DHCP Enabled: Yes
DHCP Server: 192.168.1.254
Lease Obtained: Tue Jun 22 15:56:44 2010
Lease Expires: Wed Jun 23 15:56:44 2010
DNS Servers: 192.168.1.254
192.168.1.254
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Disabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-06-21 19:07:42.
** CD/DVD Drive Tests **
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
E: ASUS DRW-2014L1T, Rev 1.02
Drive is empty.
** Device Connectivity Tests **
iPodService 9.2.0.61 is currently running.
iTunesHelper 9.2.0.61 is currently running.
Apple Mobile Device service 3.1.0.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Texas Instruments 1394 OHCI Compliant Host Controller. Device is working properly.
Connected Device Information:
iSquelch, iPhone 3GS running firmware version 4.0
Serial Number: 87945GJR3NR
** Device Sync Tests **
Sync tests completed successfully.
Whenever I sync, multiple instances of (and by multiple, I mean literally dozens) of copies of "com.apple.outlook.client.exe *32" begin opening. They continue opening until iTunes basically grinds to a halt. This happens with MobileMe, too, and means I can't sync up with Outlook.

Checked: I'm using a 32-bit version of Outlook and not a 64-bit. Did not sync via a second user's installation, either.
Still searching for resolution.
Note: All other syncing still works, iTunes only crashes under the weight of 90 or so com.apple.Outlook.client.exe instances when any (any) Outlook-related option is checked, including Outlook-related options in MobileMe. The processes can be killed all at once by right clicking "SyncServer.exe" in the task manager and clicking "End Process Tree."

Why doesn't com.apple.IE.client.exeshut down when Mobile Me finishes sync?

Since upgrading to iTunes 9.1.0.74 a couple of days ago, the com.apple.IE.client.exe process, which starts during the Calendars phase of a Mobile Me manual sync process, fails to shut down when the sync process is complete. The Calendars phase now runs 5-10 minutes even when there are no Calendar changes. While it runs, com.apple.IE.client.exe runs at 50% of the CPU, and memory usage climbs continuously. It reaches about 2 GB (2,000,000 K in Windows Task Manager!) by the time the sync process completes.
However, com.apple.IE.client.exe _doesn't end_ even though the sync is complete. Instead, it keeps running at 50% CPU. Somewhere around 2.1 to 2.2 GB of memory usage it reports: "com.apple.IE.client.exe - Application Error. The exception Breakpoint. A breakpoint has been reached. (0x80000003) occurred in the application at location 0x0c90120E."
This has occurred at the end of four Mobile Me syncs now. Upon selecting OK to end the application, everything else seems fine.
I see other posts regarding the com.apple.IE.client.exe process in the latest iTunes update, but no clear resolution. I tried Apple Mobile Me chat, and replicated the problem twice while on-line, but their only recommendation (after verifying that my only Outlook COM add-on is the iTunes add-on) was to reinstall iTunes and Mobile Me, and if that didn't work, to create another user and see if the sync problem occurred there. Since that user would have no Outlook data to sync, this suggestion wasn't very helpful.

As am experiment, I just ran a Mobile Me manual sync, but first I de-selected Bookmarks, and synced just Contacts and Calendars. com.apple.IE.client.exe did NOT start at the beginning of the Calendars sync phase (as it had in the four previous syncs since upgrading to iTunes 9.1.0.79). In fact, it did not start at all, the Calendars sync phase finished quickly and the entire sync process finished in less than a minute.
The apparent conclusion is that com.apple.IE.client.exe is used to sync IE bookmarks with Mobile Me, it starts (for some unknown reason) at the beginning of the Calendars sync phase if Bookmarks are being synced (not at the beginning of the Bookmarks sync phase), it delays the Calendars sync phase significantly (but not the Bookmarks sync phase), and it has some sort of serious memory leak problem that balloons its memory usage past 2 GB.

Java.exe error message

I am getting a java.exe error message after installing Oracle 8i Enterprise Edition on a Windows XP home edition. Can anyone help?

Hi,
Oracle usually installs it's own JDK for it's usage. Probably the paths are updated so that iAS is not able to use java that is bundled along with it. Please check the version of java at the command prompt by issuing..."java -fullversion". Please let me know the outcome for me to help you further on this.
Regards
Ganesh .R
Developer Technical Support
Sun Microsystems
http://www.sun.com/devlopers/support

When trying to uninstall Apple Mobile Device Support: The Installer has insufficient privileges to modify this file: C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\com.apple.MobileSync.client.resources\ClientDescription50.plist.

When trying to uninstall Apple Mobile Device Support: The Installer has insufficient privileges to modify this file: C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\com.apple.MobileSync.client.resources\ClientDescription50.plist.

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

You can try downloading the 64 bit version. You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

Com.apple. Compressor compressorkit error domain error-1

hello
can you please help with this error i see at Fainal cut pro
error is
The share operation DVD has failed
The operation couldn’t be completed
(com.apple. Compressor compressorkit error domain error-1)
Thank you
Arefainy

Sort of like the Womens Downhill in Sochi!
Russ

SDTray.exe error message

When starting computer, I get an SDTray.exe error message. I have Windows 7 64-bit on model e9280t. The messages says system can't start because snlBase150.bpl is missing from computer. When I close this message, the computer runs normally, as far as I can tell. Is there something I can do to correct this error message?

Are you using a trial version of Spybot - Search & Destroy 2?
If so, that is what is causing the message. Use the Spybot Search & Destroy uninstaller to remove the program and the message shuold go away.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

HT201398 FaceTime & Messages now won't open on my iPad. Now no toggle switch in settings. Log in with my Apple ID sends activation error message 'try again'. Both Apps work on my iPhone & Mac.Any help?

FaceTime & Messages now won't open on my iPad. Now no toggle switch in settings. Log in with my Apple ID sends activation error message 'try again'. Both Apps work on my iPhone & Mac.Any help?

Adjusting the date or time didn't do anything for me either. I'm guessing my two options are to either do the full restore from scratch and not apply any backup ... Or possibly wait for an iOS update that might resolve this issue.
I'm not that much of an avid twitter user that I need it implemented natively in all my devices - so for now I'll probably value all my game save data, internal settings in apps e.t.c. over that functionality (or over the amount of work it would be to get me back to where I am now after a full wipe). I'll see what happens after the next iOS delta update. I'll reevaluate the full wipe after that if the issue hasn't been resolved

My apple RIP gives this error message" the application ppRIPe has unexpectedly quit"

MY APPLE RIP GIVES THIS ERROR MESSAGE" the application ppRIPe has unexpectedly quit"

Thanks.
I should have mentioned that I have already done the Resolving Permissions as outline on Apple Support pages, but, I went ahead and did the complete sequence as shown on Dr. Smokes.
I decided to stop beating a dead horse and did an Erase and Install of 10.2 again since I did not have anything on there yet. So far, everything is working perfectly. I am doing the Software Updates called for one by one to see if any of those caused the problem.
The only thing I did other than doing all of the updates after the install was to install OS 9.2 for my Classic Environment software and I also installed an HP PSC 1315v All-In-One scanner/printer. I cannot imagine that would have done anything.
I did have some strange issues with Where in the USA is Carmen Sandiego and The Star Fleet Technical manual so I may stay away from them unless I start in OS 9 if none of the other updates cause any issues.
Thanks. BTW, How should I rate your answer? I know that it did not solve my problem, but, it is likely that something else I did whacked something.
I'll update when I know more.

HT1926 Version 11.1.4.62 on WinXP issue: AppleMobileDeviceHelper.exe error message every 30 seconds. iTunes hangs when iPhone4 is syncronized

Version 11.1.4.62 on WinXP issue: I have re-installed iTunes according to instructions. iTunes give me the error message "AppleMobileDeviceHelper.exe has found an error and terminates. Restarting service does not help. Re-installing does not help. iTunes cannot update iPhone4S, iTunes hangs when trying after iPhone syncronization.

See the user tip: https://discussions.apple.com/docs/DOC-6562 for resolution

I can't seem to download anything. I keep getting a win32.exe error message

I tried downloading skype and firefox cancels the download. I refresh the download and it proceeds. But when I try to find
the skypeI get an error message that says
skype is not a win32.exe application. I even tried another browser and I got the same message

Hello julielvanova,
Thank you for using Apple Support Communities.
For more information, take a look at:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Have a nice day,
Mario

Com.apple.DotMacSync.client.exe error message

Similar Messages

Maybe you are looking for