COM error in SAP toolbar, Crystal Reports 2008 SP2 FP2.1

Hi,
Error: COM execption caught in CExtToolBar::GenerateNewTempalte().HR = 0x80004005, ::InitOpenDialog().HR = 0x800004005; ::InitializeGlobalData(). HR = 0x03edafe7
Unfortunately the error hasn't been fixed for us with FP 2.1 as it was with Sebastian.
I have GUI 7.10 (7100.2.7.10348 Build 967944 Patch Level 14), Explorer 3.x and 7.0 installed.
We are on SAP Integration Kit SP 2 FP2.1 and CR SP2 FP2.1
I can connect to SAP using the MDX drivers etc, but get the same COM execption caught using the SAP toolbar.
We want to use SAP BW variables as CR parameters in our report and the only way I'm understand from Ingo's previous posts to get a dynamic list of values from a SAP variable is to create the report via the CR SAP toolbar and save it to Infoview.
thanks
Michael

looks identical to your previous item.
Ingo

Similar Messages

Crystal Reports 2008 SP2 Install Error

When I try to install Crystal Reports 2008 SP2 I receive the following error...
The feature you are trying to use is on a CD-ROM or other removable disk that is not available.
Insert the 'Crystal Reports 2008 SP1' disk and click OK.
SP1 was installed via the upgrade utility that launches with the software. I found the package folder in C:\Documents and Settings\%username%\Local Settings\Temp but it did not contain the MSI SP2 is looking for.
I've tried installing SP2 by both letting the update utility attempt to automatically install it and by just downloading it from the update utility and running the installation manually.
Anyone experience this issue?
-Chris
Edited by: chris.murphy on Oct 20, 2009 10:18 PM

Hi Chris,
This is not a support site but a public place for all users to help each other. If you would like to talk to a support Engineer then please purchase a case.
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551
Try downloading SP1 and installing it from your local hard driver and then install SP2. I'll mention this issue to the install team and see what they say about your issue.
Thank you
Don

How to overcome the Memory leakage issue in crystal report 2008 SP2 setup.

I have developed the small windows based application tool with help of Visual studio 2008 for identify the memory consumption of crystal report object. It helps to load the crystal report objects in the memory and then released the object from the memory. The tool simply does the u201CLoading and Unloadingu201D the objects in the memory.
The tool will be started once u201CTest_MemoryConsumption.Exeu201D executed. The u201CTest_MemoryConsumption.Exeu201D consumes u201C9768 KBu201D memory before load the crystal report object in memory. It means, 9768 KB is normal memory consumption for run the tool.
Crystal report object initiated by the tool and object help to load the report in memory once the tool initiated the crystal report object. Now u201CTest_MemoryConsumption.Exeu201D consumes u201C34980 KBu201D memory during the crystal report object creation and report load process. The actual memory consumption of crystal report object is 34980u20139768=u201C25212u201DKBu201D.
The memory consumption u201C34980 KBu201D will be continued till the end of the process. The memory consumption will be reduced to u201C34652 KBu201D from u201C34980 KBu201D once report load process completed. It means, u201C328 KBu201D memory only released from the memory consumption. Tool enables the Release command for the crystal report object. But crystal report object does not respond to the command and will not release his memory consumption.
The memory consumption u201C34652 KBu201D will be stayed in the memory once job ends. If i again initiate the crystal report object then it crystal report object start to consume the memory from 34652 KB.
Database objects and crystal report objects are properly used in the tool. The object release commands properly communicated to crystal report setup. But the u201CCrystal report service pack 2u201D setup unable to respond the commands which has enabled from .Net Tool. Crystal report objects are properly initiated and disposed in the tool. But the crystal report unable to release from the server.
The memory consumption will be reduced once the server restarted or kill the application.
Crystal report 2008 and crystal report 2008 SP2 setup available in the server.
Microsoft .Net Framework 2.0 SP2, Microsoft .Net Framework 3.0 SP2 and Microsoft .Net Framework 3.5 SP1 are available in the server,
Could you please suggesst how to avoid the memory consumption keep increasing and how to release the memory consumption once the crystal object disposed???

Hi Don..
My case is different one. I hope, the problem with Run time Installation setup file (Crystal report 2008 Serivce Pack2 installer) which we installed in the server.
Let me explain with Live scenario which our client faced in crystal report 2008 Service pack2 Installer.
Our client is using a application to help to print their reports. The application is developed with Windows service.
Windows service keep on running in the server. Windows service executes the client 's crystal reports( Labels Report, Stock report) which designed for clients need and the reports will be printed from printer.
10 Same type report (Label Report) will be printed in 1 minute. Reports are not printing during non business hours. But the windows service keep on running. Memory cosumption of application will be 160 MB in business hours.
For Example, On Monday the application memory consumption starts with 160 MB. The Memory consumption will be reached 165 MB in peak business hours. Then the memory will be ended in163 MB in the End of Monday. It means, The memory consumption will be in 163 MB during the non business hours. Reports will not be printed in non business hours.
On Tuesday, the application memory consumption starts with 163 MB and it will be reached 168 MB during the peak hours. The Memory consumption will be ended in 165 MB in the end of Tuesday. The same process contiues till friday. End of friday, the memory consumption of the application will be ended with 170 MB.
Application Memory Consumption slowly increasing in the server. In 5 days, Memory consumption reached Threshold value (170 MB) of the server. Application gets hanged up once the memory consumption reached 170 MB. We got the error messages as "Attempted to read write protected memory " / "Not Enough memory for process". If we restart server / If we restart the service then memory consumption of application get reduced to 160 MB.
From the above scenario, We came know that the either the problem with Application object or the problem crystal report object. In the application, We have checked dispose methods of application objects completly. I am sure that application objects are properly disposed in the application. I hope the problem not with application objects. The problem with Crystal report objects.
Application properly communicates the dispose methods to crystal report objects. Crystal report objects are not released from
the memory.
Crystal report 2008 Serive Pack 2 setup installed in the server.
As you said, If Crystal report runtime is not released from memory then memory consumption keep increase??? In service oriented architecture application, how to unload the crystal report runtime??
Do you any fix for this kind of issue??
Willl Crystal report 2008 service pack 3 help on this issue??

Crystal Report 2008 SP2 & InfoView: Custom XML Export doesnt work

Hi,
I have created a Crystal Report .rpt and want to use the custom xml export function to output a custom xml file. For that, I created a custom transformation file (xsl) and imported it into the .rpt . On the client machine, if I open the .rpt with Crystal Reports 2008 SP2, and select to export it using the custom xml output, all runs fine. (under SP1, only half the file was created...)
If I upload the .rpt file to Infoview (server-side: BO Enterprise 3.1, SP2 as well) and schedule it, I can select xml, and then my custom xml as output format, but I am getting the error message u201EUngültige Exportoptionen" (="invalid export options"), in the instance history. No output file is created. I use file system as destination. Other output formats like .pdf and .rpt work fine and files are created.
Ideas:
-Are there any more settings needed on the server (e.g.CMC - Crystal Server Jobs, other Processes, ...) so I can schedule the report and successfully create the custom xml format file as output?
-Do I need to upgrade to a specific SP or FP on server-side so everything runs smooth?
Thanks for your help!

Hi Florian,
I'm having the same problem, have you by any chance found a solution?
Gajus.

Crystal Reports 2008 SP2 - Fix Pack 2.1 Readme

Hi,
Where can I find a readme of the Crystal Reports 2008 SP2 - Fix Pack 2.1 with the list of fixed issues?
Specifically does this fix the issue of dates when using .NET datasets and ADO recordsets (ttx files)?
Regards
Craig

Is this not considered a critical breaking change? I think 6+ months is a long time to wait especially given we had to wait for SP2 in the first place for other fixes. Now we find we cant go to SP2.
Is there anyway to get this esculated?
What if SP3 hs another breaking change?
Hopefully your will locate release notes, why is it that SAP dont appear to make these readily available for new serice packs and fix packs? We seem to go through this everytime?
Craig

Crystal Reports 2008 SP2 - Fix Pack 2.1

I see that Crystal Reports 2008 SP2 - Fix Pack 2.1 has been posted as of 10/26/09. Anybody know what's in it? I didn't see a Read Me. Also, when you download and start to install this, it reports itself as a a Fix Pack for Version 1, but the version on things like CRViewer.dll show a version of 12.2.1.412 and a build date of 2009/10/14, which leads me to believe it really is for SP2.

Moved to Legacy Development forum.
We typically release the merge modules at the same time but sometimes they are delayed getting to our download site.
Go to: SAP Crystal Solutions Downloads and click the Crystal Reports... link in the middle of the page and then select the correct versions and you'll find all of the dowloadables.
If they are not there then let me know and I'll follow up with the guys who publish the files.
Thank you
Don

Crystal Report 2008 SP2 Dynamic image file

ASP.NET2008 C# +Crystal Report 2008 SP2
製作動態顯示圖片的報表
資料庫是SQL2005 內存圖檔的路徑
使用DataSet+Report Document的方式產生報表資料
動態圖片是利用工是產生的
現在發現以下問題，其他固定顯示的圖片正常
1.未安裝SP1 &SP2
(1)在VS下建置檔案：圖片正常顯示，且有錯誤訊息
(2)部署後直接開啟網頁，無法顯示動態產生的圖片
(3)錯誤訊息如下：
網頁錯誤詳細資料
使用者代理程式: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
    時間戳記: Mon, 1 Feb 2010 08:22:08 UTC
    訊息: 無法判定字串常數的結尾
行: 23
    字元: 19
    程式碼: 0
    URI: http://192.168.1.89/aspnet_client/system_web/2_0_50727/crystalreportviewers12/js/dhtmllib/language/zh_TW/labels.js
2.安裝SP1 &SP2 後
(1)在VS下建置檔案：圖片正常顯示，且有錯誤訊息
(2)部署後直接開啟網頁，無法顯示動態產生的圖片，且有錯誤訊息(同2(1))
    (3)錯誤訊息如下：
網頁錯誤詳細資料
使用者代理程式: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
時間戳記: Wed, 3 Feb 2010 00:45:39 UTC
訊息: 無法判定字串常數的結尾
行: 129
字元: 19
程式碼: 0
URI: http://192.168.1.89/aspnet_client/system_web/2_0_50727/crystalreportviewers12/allStrings_zh_TW.js

Hi Florian,
I'm having the same problem, have you by any chance found a solution?
Gajus.

Getting an error trying to install Crystal Reports 2008 on a 64 bit Windows

reformatted my computer and now I'm trying to install Crystal Reports 2008 on 64 bit windows 7 box. When the "Registering modules" portion of the install comes up, I get a message that a dll has failed to register. I saw something about not having the Microsoft Visual c++ 2005 redistributable pack (x86) installed but that was not it either.
The cd label say Crystal Reports to Crystal Reports 2008 Upgrade, but it does not seem like I have to have the older version of Crystal insatlled.
Any ideas how to fix this ?

Hello together,
i've had the same problem. Tried to install CR SP 2 "cr2008win_sp2.exe" onto an existing CR 2008 SP1 installation, and got the above error. After extracting the cr2008win_sp2.exe to an folder using Winzip (or just start Installation, the source would be extracted to "c:\temp" ), navigate to the subfolder "\package" and execute the CrystalReports.msp (in my case: c:\temp\package\CrystalReports.msp). This start's the Installation of SP 2. If you get an version mismatch, use parameter SKIP_PATCH_VERSION_CHECK=1 by typing command in an dos prompt "c:\temp\package\CrystalReports.msp SKIP_PATCH_VERSION_CHECK=1" but remember, you need to have an SP1 installed (somebody said, SP's are incremental).
Reboot and apply then the CR 2008 SP2 FixPack 7 "cr2008fp27.exe". Use this Link to Download CR and Xcelsius Stuff:
[https://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm]
I would suggest you not to use IE for downloading, use an alternative browser. I got only bad downloads (IE8 on Win7).
This is the way i did and this works pretty good.
Good Luck
Matthias

Crystal Reports 2008 sp2 PrinterDuplex problem

All,
I'm working on a .NET 3.5 application (upgrade from 2.0) with Crystal Reports in it.
Since we just upgraded the code from 2.0 to 3.5, I thought it would be intresting to also upgrade from Crystal Reports 2005 to Crystal Reports 2008.
This transition worked flawlessly, except for 1 thing which I can not wrap my head around: I am unable to change the PrinterDuplex in the report.PrinterSettings since the upgrade !!
report.PrintOptions.PrinterDuplex = CrystalDecisions.Shared.PrinterDuplex.Horizontal; // does not work anymore
Message: COMException: {"Invalid index. (Exception from HRESULT: 0x8002000B (DISP_E_BADINDEX))"}
Source: "CrystalDecisions.ReportAppServer.Controllers"
Stacktrace: "   at CrystalDecisions.ReportAppServer.Controllers.PrintOutputControllerClass.ModifyPrintOptions
(PrintOptions newVal)\r\n   at CrystalDecisions.CrystalReports.Engine.PrintOptions.set_PrinterDuplex
(PrinterDuplex value)\r\n   at Gui.Reporting.ReportPrinter.PrintOnly (ReportInfo info, IList`1 paramValues, Int32 nCopies) in C:
data\ \tcm_1.0
Generation
TCM
src
Gui
Reporting
ReportPrinter.cs:line 91"
Anybody here who had the same problem or knows where I could find an answer or what I'm doing wrong ?
cheers and thanks in advance,
Andy

Just did a quick test on it. Works for me fine. Using CR 2008 SP 2.
If you do not have SP 2, it is available from here:
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
Ludek

No Hyperlink in PDF after export from Crystal Reports 2008 SP2

When I export a report from Crystal Reports 2008 Developer (as well as from the runtime) SP2 to PDF the Hyperlink to a file on hard disk is missing.

Hi,
Go through this LInk
Re: No hyperlinks after exporting to pdf
Regards,
Salah

Error loading in DLL (Crystal reports 2008 version 12.3)

we have installed the software but While adding the reference in VB,and while selecting the (Crystal Report ActiveX Viewer 12.0) we can't add as a reference it is showing (error in loading DLL) so please request you to check this error which is attached and revert on this As early as possible.

Thread moved to the NET - SAP Crystal Reports forum.
For timely response, it is important to make sure you post to the correct forum (check the header of each forum).
From your description, I suspect that you are trying to use the COM based Report Designer Component(?). This component has been retired in CR XI R2. The activeX viewer you are trying to access is only included for internal purposes and you are not licensed to use it at all. In CR 2008, you will have to use the CR SDK for Visual Studio .NET.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Function Sequence Error -- After upgrading to Crystal Reports 2008

Since we intergrated Crystal 2008 in our application, We are having the ODBC DRIVER ERROR "S1010, Function Sequence Error"
The following steps reproduces the error.
I open any crystal report(using my application) and close it.
And then I try to close another dialog in my application.
The destructor of that dialog has the DELETE FROM TMPRPT WHERE etc... But actually the TMPRPT table is empty.
But This Scenario in general, does not produce any error. Only after I open and close Crystal report, and when the TMPRPT table doesn't have any records, executing the above DELETE sql throws CDBException, Funciton Sequence Error.
Is it because of the upgrade/mismatch of dlls? Can any one help how to work around this?
Thanks.

Hi Don,
I would like to thank you for your helpful advice. your tips for odbc tracing really works.
Just to simplify things, I have created a simple mfc dialog based application that opens a connection using CDatabase in the initdialog and closes the connection in the destructor(because that is how we do in our main large application). On the dialog i put a "Print" button and when i click it, I open a crystalreportform and fill the connectioninfo structure and then call SetDBLogonForReport(ConnectionInfo connectionInfo, ReportDocument reportDocument). on the Form_closed function, I close database connections and close the report document.
When I come back to mfc application I execute a Delete from table where 1 =0, basically any delete/update that return empty recordset and it throws function sequence error.
BOOL CCrystalDemoDlgDlg::OnInitDialog()
     CDialog::OnInitDialog();
     ConnectDatabase() ;
     return TRUE; // return TRUE unless you set the focus to a control
BOOL CCrystalDemoDlgDlg::ConnectDatabase()
     if ( m_Database.IsOpen() )
          m_Database.Close();
     // Process database open request.
     CString szConnection("DSN=CRYSTALTEST32;UID=DBA;PWD=picture");
                 !m_Database.OpenEx( szConnection, CDatabase::noOdbcDialog ) )
     return TRUE;
BOOL CCrystalDemoDlgDlg::bExecuteSQL( CString SqlString )
                if(m_Database.IsOpen())
     m_Database.ExecuteSQL( (LPCTSTR)SqlString );
     return TRUE;
void CCrystalDemoDlgDlg::OnBnClickedBtnPrint()
     TRY
          bExecuteSQL(_T("DELETE FROM TMPRPT WHERE 1=0"));
          CrystalReportsForm ^ CRForm = gcnew CrystalReportsForm(gcnew System::String("ActvSumm1.rpt"));
          CRForm->ShowDialog();
          //CRForm->RunCrystalReports();
          delete CRForm;
          CRForm = nullptr;
          bExecuteSQL(_T("DELETE FROM TMPRPT WHERE 1=0"));
     CATCH(CDBException, e)
          AfxMessageBox( e->m_strError );
          return ;
     END_CATCH
the following is the code in crystalreports library
namespace CR2008Library
    public partial class CrystalReportsForm : Form
        private ReportDocument _reportDocument;
        private string _reportFile = "C:\\Nomadic\\Report\\";
        public CrystalReportsForm(string reportFile)
            InitializeComponent();
               _reportDocument = CreateReportDocument(reportFile);
        private ReportDocument CreateReportDocument(string reportFile)
            ReportDocument newDocument = new ReportDocument();
            _reportFile += reportFile;
            newDocument.Load(_reportFile);
            return newDocument;
        public void ConfigureCrystalReports()
            ConnectionInfo connectionInfo = new ConnectionInfo();
            connectionInfo.DatabaseName = "CRYSTALTEST";
            connectionInfo.UserID = "DBA";
            connectionInfo.Password = "picture";
            connectionInfo.ServerName = "CRYSTALTEST32";
            SetDBLogonForReport(connectionInfo, _reportDocument);
            crystalReportViewer.ReportSource = _reportDocument;
        private void SetDBLogonForReport(ConnectionInfo connectionInfo, ReportDocument reportDocument)
            Tables tables = reportDocument.Database.Tables;
            foreach (CrystalDecisions.CrystalReports.Engine.Table table in tables)
                TableLogOnInfo tableLogonInfo = table.LogOnInfo;
                tableLogonInfo.ConnectionInfo = connectionInfo;
                table.ApplyLogOnInfo(tableLogonInfo);
        public void CrystalReportForm_Load(object sender, EventArgs e)
            ConfigureCrystalReports();
        private void CrystalReportsForm_FormClosed(object sender, FormClosedEventArgs e)
            DisposeCR();
        private void DisposeCR()
            // Clean up by closing and disposing of the ReportDocument object
            if (_reportDocument != null)
                if (_reportDocument.Database.Tables.Count > 0)
                    Tables tables = _reportDocument.Database.Tables;
                    foreach (Table table in tables)
                        table.Dispose();
                _reportDocument.Database.Dispose();
                _reportDocument.Close();
                _reportDocument.Dispose();
            _reportDocument = null;
I have the log file which doesn't show any error in crystalreports library. I am giving some of the log file for your reference to see what's happening while exiting from crystal and executing the problem sql
CrystalDemoDlg 16c8-e8c     EXIT SQLFetch with return code 0 (SQL_SUCCESS)
          HSTMT               00F41CC0
CrystalDemoDlg 16c8-e8c     ENTER SQLFetch
          HSTMT               00F41CC0
CrystalDemoDlg 16c8-e8c     EXIT SQLFetch with return code 100 (SQL_NO_DATA_FOUND)
          HSTMT               00F41CC0
CrystalDemoDlg 16c8-e8c     ENTER SQLCloseCursor
          SQLHSTMT            00F41CC0
CrystalDemoDlg 16c8-e8c     EXIT SQLCloseCursor with return code 0 (SQL_SUCCESS)
          SQLHSTMT            00F41CC0
CrystalDemoDlg 16c8-e8c     ENTER SQLFreeHandle
          SQLSMALLINT                  3 <SQL_HANDLE_STMT>
          SQLHANDLE           00F41CC0
CrystalDemoDlg 16c8-e8c     EXIT SQLFreeHandle with return code 0 (SQL_SUCCESS)
          SQLSMALLINT                  3 <SQL_HANDLE_STMT>
          SQLHANDLE           00F41CC0
CrystalDemoDlg 16c8-e8c     ENTER SQLDisconnect
          HDBC                00F427A0
CrystalDemoDlg 16c8-e8c     EXIT SQLDisconnect with return code 0 (SQL_SUCCESS)
          HDBC                00F427A0
CrystalDemoDlg 16c8-e8c     ENTER SQLFreeHandle
          SQLSMALLINT                  2 <SQL_HANDLE_DBC>
          SQLHANDLE           00F427A0
CrystalDemoDlg 16c8-e8c     EXIT SQLFreeHandle with return code 0 (SQL_SUCCESS)
          SQLSMALLINT                  2 <SQL_HANDLE_DBC>
          SQLHANDLE           00F427A0
CrystalDemoDlg 16c8-e8c     ENTER SQLFreeHandle
          SQLSMALLINT                  1 <SQL_HANDLE_ENV>
          SQLHANDLE           00F42718
CrystalDemoDlg 16c8-e8c     EXIT SQLFreeHandle with return code 0 (SQL_SUCCESS)
          SQLSMALLINT                  1 <SQL_HANDLE_ENV>
          SQLHANDLE           00F42718
CrystalDemoDlg 16c8-a34     ENTER SQLAllocStmt
          HDBC                00F419A0
          HSTMT *             0012E2C4
CrystalDemoDlg 16c8-a34     EXIT SQLAllocStmt with return code 0 (SQL_SUCCESS)
          HDBC                00F419A0
          HSTMT *             0x0012E2C4 ( 0x00f41cc0)
CrystalDemoDlg 16c8-a34     ENTER SQLSetStmtOption
          HSTMT               00F41CC0
          UWORD                        0 <SQL_QUERY_TIMEOUT>
          SQLPOINTER          0x0000000F
CrystalDemoDlg 16c8-a34     EXIT SQLSetStmtOption with return code 0 (SQL_SUCCESS)
          HSTMT               00F41CC0
          UWORD                        0 <SQL_QUERY_TIMEOUT>
          SQLPOINTER          0x0000000F (BADMEM)
CrystalDemoDlg 16c8-a34     ENTER SQLExecDirectW
          HSTMT               00F41CC0
          WCHAR *             0x03A30458 [      -3] "DELETE FROM TMPRPT WHERE 1=0\ 0"
          SDWORD                    -3
CrystalDemoDlg 16c8-a34     EXIT SQLExecDirectW with return code 100 (SQL_NO_DATA_FOUND)
          HSTMT               00F41CC0
          WCHAR *             0x03A30458 [      -3] "DELETE FROM TMPRPT WHERE 1=0\ 0"
          SDWORD                    -3
CrystalDemoDlg 16c8-a34     ENTER SQLNumResultCols
          HSTMT               00F41CC0
          SWORD *             0x0012E2B8
CrystalDemoDlg 16c8-a34     EXIT SQLNumResultCols with return code -1 (SQL_ERROR)
          HSTMT               00F41CC0
          SWORD *             0x0012E2B8
          DIAG [S1010] [Microsoft][ODBC Driver Manager] Function sequence error (0)
CrystalDemoDlg 16c8-a34     ENTER SQLErrorW
          HENV                00F418D8
          HDBC                00F419A0
          HSTMT               00F41CC0
          WCHAR *             0x0012DE00 (NYI)
          SDWORD *            0x0012E224
          WCHAR *             0x0012DE20
          SWORD                      511
          SWORD *             0x0012DE14
CrystalDemoDlg 16c8-a34     EXIT SQLErrorW with return code 0 (SQL_SUCCESS)
          HENV                00F418D8
          HDBC                00F419A0
          HSTMT               00F41CC0
          WCHAR *             0x0012DE00 (NYI)
          SDWORD *            0x0012E224 (0)
          WCHAR *             0x0012DE20 [      56] "[Microsoft][ODBC Driver Manager] Function sequence error"
          SWORD                      511
          SWORD *             0x0012DE14 (56)
CrystalDemoDlg 16c8-a34     ENTER SQLErrorW
          HENV                00F418D8
          HDBC                00F419A0
          HSTMT               00F41CC0
          WCHAR *             0x0012DE00 (NYI)
          SDWORD *            0x0012E224
          WCHAR *             0x0012DE20
          SWORD                      511
          SWORD *             0x0012DE14
I know that my post is too long, but i would like to give enough information for you to see what's happening. I use visual studio 2008 with crystal library 2008.
Thanks,
Lavanya.

Error 1305 while installing Crystal Reports 2008, JavaSDK

While installing Crystal Reports from the original media on a new Lenovo Thinkpad running Windows XP Pro SP3 I get the following error while installing:
Error 1305: Error reading from File: c:\program files\Business Objects\javasdk\jre\audio\soundbank.gm. Verify that the file exists and that you can access it.
I have the option to retry or cancel, obviously cancel exits the installer. Retry just fails again. I have tried to access the file (which does exist) and I cannot because it is in use. I used Sysinternals process explorer to find out what has the file in use and it is msiexec.exe which is the Microsoft Installer service which is running in order to install CR2008.
I have tried restarting, setting permissions on the file and folder, uninstalling and reinstalling Java VM from Sun. I even tried killing msiexec (which killed the install). I even tried taking out all reference to java in a custom install.
I am at a loss on what to do next. Any help would be appreciated.
-Michael

I found that if I installed it from a copied local directory instead of the CD Rom that it worked

Crystal Reports 2008 SP2 Installation Error

Howdy Folks...
I have been trying to install the SP2 for Crystal Reports.
I get the following error...
"The installaion source for this product is not available. Verify that the source exists and that you can access it."
Running the downloaded file, unpacks the contents, starts the installer, then the error message is displayed.
System is with Windows Vista SP2
Your help and advice is needed...
Thanks,
Jim

Yes, mapping the network drive on the install PC works, technically. Unfortunately, it doesn't resolve my core problem for two reasons.
1. I'm trying to make the install procedure as touchless as possible for an install base of potentially hundreds of users. Having them all map a network drive would defeat the purpose.
2. I oversimplified the explanation of my situation to make the question easier to ask. We actually have a home-grown, web-based client software distribution tool from which I'm trying to setup the installation. The network drive, and generally all details of the installation are transparent to the installer, so that's another strike against mapping the network drive.
Here's the command line script (nothing fancy) and the code of the supplemental .ini file that I'm using. (This assumes that the self-extracting Crystal SP2 file has already been extracted and that I'm working directly with the setup.exe, setup.ini, and package files.)
And to reiterate, this scripting procedure has worked like a charm for Xcelsius SP3 and Crystal SP1. It just falls flat on its face for Crystal SP2
Batch Script:
setup.exe -r Crystal2008SP2.ini
Crystal2008SP2.ini:
[OTHER]
QUIET=/qb+
[INSTALL]
CLIENTLANGUAGE="EN"
DISABLEWEBUPDATE="1"
ENABLELOGFILE="1"
INSTALLDIR="C:\Program Files\Business Objects\"
REINSTALL="ALL"
[FEATURES]
REMOVE=""
ADDLOCAL=""
ADDSOURCE=""
ADVERTISE=""
Thanks,
Josh
Edited by: Josh Crawford on Jan 20, 2010 8:44 AM

Errors trying to install Crystal Reports 2008 free trial

I am receiving countless errors whilst attempting to install the CR 2008 free trial.
They all begin :-
"Error 1904. Module D:Program Files\Business Objects\2008Demo\BusinessObjects Entreprise 12.0\win32_x86\"
followed by a DLL (examples listed below)
"failed to register. HRESULT "
followed by a long number "-2147024769
"contact your support personnel."
examples DLL's :-
ReportConvTool.dll
MyInfoView.dll
Encyclopedia.dll
Encyc.dll
Designer.dll
CMC.dll
Infoview.dll
AppFoundation.dll
AFDashboardPage.dll
Word.dll
TXT.dll
Shortcut.dll
ServerGroup.dll
Server.dll
ScopeBatch.dll
RTF.dll
Agnostic.dll
Program.dll
Powerpoint.dll
CustomRole.dll
PDF.dll
Hyperlink.dll
Excel.dll
Event.dll
Calendar.dll
CMSAdmin.dll
SAWebAdmin.dll
PageSrvAdmin.dll
CacheSrvAdmin.dll
UserGroup.dll
User.dll
Publication.dll
Profile.dll
ObjectPackage.dll
LicenceKey.dll
Inbox.dll
Folder.dll
FavoritesFolder.dll
Connection.dll
I will choose abort at this stage.
Any ideas ?

I have resolved this problem myself.
Resolution was to close down all other programs, re-boot and re-try the install.
Went through ok then.

COM error in SAP toolbar, Crystal Reports 2008 SP2 FP2.1

Similar Messages

Maybe you are looking for