COM error on Vista

hi all,
I have created an Addon for SAPB1. I installed it under windows xp and it runs smoothly but when installed on a computer running windows vista I encountered a COM..CLSID error.
Any suggestions on how to resolve this problem will be appreciated. tnx

Similar Messages

Thinkpad T60 Error installing Vista not seeing cd/dvd to finsh installing

Thinkpad T60 Error installing Vista not seeing cd/dvd
I’ve removed all programs recommended by IBM and Microsoft. After Vista loads files
I get the error below. Its like it doesn’t see the cd dvd to reboot and finish installing. Any Ideas? Jack
Windows XP Professional Service Pack 3 (build 2600)
LENOVO 2623D6U ThinkPad T60
System Serial Number: L3A2060
Processor a
Main Circuit Board b
1.85 gigahertz Intel Pentium III
128 kilobyte primary memory cache
2048 kilobyte secondary memory cache
Board: LENOVO 2623D6U
Serial Number: VF05
Bus Clock: 167 megahertz
BIOS: LENOVO 79ETE5WW (2.25 ) 08/27/2009
Drives
Memory Modules c,d
99.41 Gigabytes Usable Hard Drive Capacity
48.52 Gigabytes Hard Drive Free Space
MAT**bleep**A DVD/CDRW UJDA775 [CD-ROM drive]
ST910021AS [Hard drive] (100.03 GB) -- drive 0
3072 Megabytes Installed Memory
Slot 'DIMM 1' has 1024 MB
Slot 'DIMM 2' has 2048 MB
http://i456.photobucket.com/albums/qq289/elktraveling/DSCN8033.jpg
<a href="http://s456.photobucket.com/albums/qq289/elktraveling/?action=view&current=DSCN8033.jpg" target="_blank"><img src="http://i456.photobucket.com/albums/qq289/elktraveling/DSCN8033.jpg" border="0" alt="Photobucket"></a>
[IMG]http://i456.photobucket.com/albums/qq289/elktraveling/DSCN8033.jpg[/IMG]

I was able to up grade XP to Vista without error.. I disabled everything in Bios. Vista loaded and was able to get IBM and Microsoft updates. I had already run Microsoft adviser so had idea which programs had to be uninstalled.

Error: Windows Vista failed to start. A recent hardware or software change might be the cause

PLEASE HELP!
My Lenovo SL500 is not working at all - I get error: "Windows Vista failed to start. A recent hardware or software change might be the cause"
I tried the following on my Lenovo:
Windows repair menu = "windows cannot be repaired"
Lenovo Rescue and Repair
Rescued my files from Hard-drive (copied to external hdd)
Restore System = Failed
Diagnose hardware = HDD passes all tests
Don't know what else to do with = Boot from another device ? Access BIOS?
Because I do not have the windows vista install disks
I purchased and downloaded the recovery disks from neosmart.net
The neosmart windows vista recovery disks DO NOT WORK = Error is "Unable to find any valid Windows partitions on this computer".
The Hard-drive exists because I was able to back-up files from HD through (Lenovo Rescue & Recovery Rescue files). So there is a hard-drive.
I don't know what to do next?
Last resort is to Factory Restore via either the Lenovo R&R or Windows Vista Recovery Disks (neosmart)?
Will I still have windows?
PLEASE HELP!

Hi, Josemne
Yes, if you can restore the system through Rescue & Recovery, then you will still have WIndows on your machine, but all your files will be deleted from the hard drive. Luckily, you have already saved those files elsewhere. I would recommend trying to restore the system and see if that works.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

COM error while submitting certificate request

Hello there
I have created a group and assigned Read, Issue and Manage Certtificate, Manage CA & Request Certificate permission on the CA.When any member of this group try to sign a certificate request,
the following error accours.
Your request failed. An error occurred while the server was processing your request.
Contact your administrator for further assistance.
" type=button
Request Mode: newreq - New Request
Dis"font-size:9pt;">(never set)
Disposition message: (none)
Result: The RPC server is unavailable. 0x800706ba (WIN32: 1722)
COM Error Info: CCertRequest::Submit: The RPC server is unavailable. 0x800706ba (WIN32: 1722)
LastStatus: The operation completed successfully. 0x0 (WIN32: 0)
Suggested Cause: This error can occur if the Certification Authority Service has not been started.
During this time event ID 10016 is logged on the eventlog
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{D99E6E73-FC88-11D0-B498-00A0C90312F3}
and APPID
{D99E6E74-FC88-11D0-B498-00A0C90312F3}
to the user <Domain>\<Username> SID (<SID>) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
I have assigned the required permissions to the group on
CertSrv Request. Also verified the membership of
Certificate Service DCOM Access.
Can you please help me to resolve this?
Thanks
Ranjith

Hi Ranjith,
I suggest you restart the certificate services and try to enroll certificates to test if the Certification Authority is functioning.
In addition, please make sure that ports in the blogs below are open:
Firewall Rules for Active Directory Certificate Services
http://blogs.technet.com/b/pki/archive/2010/06/25/firewall-roles-for-active-directory-certificate-services.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

I-tunes and Quicktime make a fatal error on Vista ?!

Hi i'm italian ... i don't write a good english but i try too explain my problem... i have a laptop HP pavilion dv6000 with windows vista... i 2 week ago buy a ipod touch 2g ... i try to install itunes ... i download it from apple.it. during the installation windows say me quicktime can be install. i don't remember the code. but i try again and the installation finish all correct. but yet when i open or connect my ipod on my pc... windows say itunes "a problem has been taken place that prevents the corrected operation of the program. if it is had a solution, it will come closed the program and envoy an automatic notification." and this message is the similar when i open quicktime! i try to install the old version of quicktime or itunes but it is similar! the version install on my pc is the 8.0.1 my pc is a 32 bit. PLEASE HELP MEEEEEEEEEE!!!!!!! thank's and sorry for the bad english!!!

THe K Lite codec pack is a well know cause of QUicktime problems.
After you uninstall it, you maust reinsatll Quicktime as follows:
Then download the version of Quickime that does not include iTunes, this is not the default option:
http://www.apple.com/quicktime/download/win.html
Now Remove Quicktime using the method for Quicktime in this article (just Quicktime):
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
When you come to your C:\Windows\system32\ folder you can delete any file or folder with Quicktime in the name.
Restart you computer
Install the stand alone Quicktime and check if it starts.
If it does you are in a position to find out if iTunes is OK.
==

Getting a COM error when calling MenuItemExecute in batch mode

I support an internal document management system for our corporate contracts. Among other applications, I have one that runs nightly in batch mode to store new invoices and connect them via bookmarks to their corresponding “parent” contract files. The original program was created in 2005 with Acrobat 7 (later updated to Acrobat 8) and it worked well for several years. However, a few months ago I upgraded the system to Acrobat 9 and since then the program has not run consistently.
The “program” actually consists of a VB application and two plug-ins. The VB application does as much work as it can with IAC and the JSO bridge, but because the files are (owner) password protected one plug-in automatically applies the necessary password using AVDocDidOpen when the VB application opens the AVDoc. The VB application then also calls the other plug-in using MenuItemExecute. The second plug-in is used to create the bookmarks between the two files by grabbing info off bookmark strings and creating the necessary actions. It also applies the password to the files.
Here is brief outline form is how this is all structured:
pdDocParent.Open
         pdDocInvoice.Open
                 avDocParent.Open (This triggers the first plug-in to apply the password)
                         Create bookmark strings in both files using JSO bridge
                                MenuItemExecute (To create the bookmark action in the parent)
                                pdDocParent.Save
                        avDocParent.Close
                        avDocInvoice.Open (This triggers the first plug-in to apply the password)
                                MenuItemExecute (To create the bookmark action in the invoice)
                                pdDocInvoice.Save
                        avDocInvoice.Close
                pdDocInvoice.Close
        pdDocParent.Close
Since the upgrade, I’m getting a COM error [The server threw an exception. (Exception from HRESULT: 0x80010105 (RPC_E_SERVERFAULT))] on a non-consistent basis when the application tries to call MenuItemExecute. When I say “non-consistent” I mean that some days the program will process several hundred files just fine. Other days it won’t process any. Then some days it will not process the first, oh, four files but will process the next 300. Usually it runs fine when started interactively, but even then the error sometimes occurs.
I recompiled both plug-ins and the VB app using the Acrobat 9 SDK (headers for the plug-in and the Acrobat type library for the VB app) but that didn’t make any difference. I added code to check if the MenuItem is available and it is in all cases.
After reviewing this more, I got to thinking that perhaps a race condition was the culprit—that a string hadn’t been completely written before the second plug-in tried to create an action for it. So I added some half-second pauses along the way, but that doesn’t seem to have helped, either.
At this point the only thing I can think of is to rewrite the application as a pure plug-in. But it’s a long and involved application and if I can get the current app to work I’d prefer to do that. I tested it with Acrobat 10.1 and encountered similar problems.
As I said, it’s been working fine up until Acrobat 9. Does anyone know of anything that might have changed with Acrobat 9 that I haven’t considered? Is there anything else I might check? Thanks.

Leonard,
I'd be interested in hearing why you think that because others at Adobe have told me it's OK. Acrobat is only being called by one user at a time and we've paid for a full license.
Thanks,
Dick

Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. W

Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. What shall I do?

Alauda_positos I would recommend reviewing your installation log files to determine the exact directory which the installer is unable to access. You can find details on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors discovered to this discussion.
For information on how to adjust file permissions please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.

Crystal Reports COM Error

I have a Crystal Report that I load and run from an ASP.Net Web Application. It works fine on my machine. However when the code is deployed to the servers, intermittently (does not happen everytime), I receive the following exception:
System.IO.FileLoadException: Retrieving the COM class factory for component with CLSID {XXX} failed due to the following error: 8007045a.
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.CreateRptDoc()
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper..ctor()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Initialize()
at CrystalDecisions.CrystalReports.Engine.ReportDocument..ctor()
at CrystalDecisions.CrystalReports.Engine.ReportClass..ctor()
When I search for this error I am not able to find the exact cause of the COM error 8007045a or the System.IO.FileLoadException. But many people have encountered other COM Errors with Crystal Reports and have suggested changing the Project properties -> Build -> Platform Target to x86 from 'Any CPU'.
Is this indeed the action to be taken for the COM error 8007045a or the System.IO.FileLoadException too?
One of the folks suggested the following: It is a low-level Windows error, not a COM error. The DllMain() entrypoint of one of the unmanaged code DLLs used by CR returned FALSE.
Any suggestions here?
Thanks in advance
Vikas
Edited by: vikasmanghani on Dec 22, 2011 3:53 PM

Hi Don
The CR version is Crystal Reports 2008 SP3.
OS - Windows Server 2003
IIS - IIS 6 (I am not entirely sure, but most likely it is IIS 6).
Does it matter, if I instantiate the ReportDocument derived class on a separate thread. For e.g.
Main Thread:
MyReportClass rpt;
Thread t1 = new Thread(InitRpt);
t1.IsBackground = true;
t1.Start();
//perform some additional work
t1.Join();
Thread t1:
rpt = new MyReportClass();
rpt.FileName = "";
rpt.Load();
Also the BuildAction property for the report is set to Content.
As an aside, I noticed another error on a different server:
System.Runtime.InteropServices.COMException (0x80000003): Retrieving the COM class factory for component with CLSID {D7F5D7C3-B06C-4CAC-BC47-A06E66D2EE9B} failed due to the following error: 80000003.
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.CreateRptDoc()
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper..ctor()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Initialize()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument..ctor()
   at CrystalDecisions.CrystalReports.Engine.ReportClass..ctor()
For this COM Error 80000003, I was able to search on SAP forums and locate the following:
1. Some people have asked to re-register clientdoc.dll using regsvr32.
2. Some people have suggested rebooting the server.
3. Some have suggested running in 32-bit mode. I am not sure if this server is 64-bit or 32-bit.
It would be great if you could help me with this one too.
Thanks in advance.
Regards
Vikas
Edited by: vikasmanghani on Dec 24, 2011 4:38 AM
Edited by: vikasmanghani on Dec 24, 2011 4:42 AM

COM - error Unknown in /sapapo/mat1 transaction

Hi,
I am using SCM 4.1 and LiveCache 7.5.0.
In the transaction /sapapo/mat1 i select a product and its location.
Then in the Extras Menu when i select Where-Used List, it shows the message "COM - error Unknown"
COM - error Unknown
Message no. /SAPAPO/OM001
Diagnosis
A COM routine has encountered a program error.
System response
The program will be terminated.
Procedure
Start the program again.
If this message appears again, contact your system administration.
Please help me on this.
Regards,
Chintan

hi - try running the livecache consistency check (/n/sapapo/om17) for product-locations and correct any errors that may be detected and try again to use the where-used functionality.
Regards
Vinod

COM error reference

Does anyone know of a document where COM error codes are described?
Specifically we're seing messages as below in background job logs.
Error for COM routine using application program (return code 3)
Error for COM routine using application program (return code 2)
Thank you

Hi
There is a transaction which returns the meaning of any COM error return code, run /SAPAPO/OM10 and then enter the return code you want to investigate. The program should then provide the full message details.
Regards
Ian

EXCEL COM ERROR Error Retrieving the COM class factory for component with CLSID {00024500-0000-0000-C000-000000000046}

Hi,
I have excel 2013 Professional installed and i have created a windows service to open the excel document and read it.
Service is running as System account.
Now when i am trying to access the excel doucment, it is throwin the exception as
EXCEL COM ERROR Error Retrieving the COM class factory for component with CLSID {00024500-0000-0000-C000-000000000046}
however, when i am using the console application running as administrator, i am able to open same file.
Any yes, i am using 64 bit service C++ and excel binaries are Any CPU.
Please note: I have already tried using dcomconfig and assigned full permission to the system user.
Is there any other solution for this issue.
regards
Pushpendra

Hello Pushpendra,
Microsoft does not currently recommend, and does not support, Automation of Microsoft Office applications from any unattended, non-interactive client application or component (including ASP, ASP.NET, DCOM, and NT Services), because Office may exhibit
unstable behavior and/or deadlock when Office is run in this environment.
If you are building a solution that runs in a server-side context, you should try to use components that have been made safe for unattended execution. Or, you should try to find alternatives that allow at least part of the code to run client-side.
If you use an Office application from a server-side solution, the application will lack many of the necessary capabilities to run successfully. Additionally, you will be taking risks with the stability of your overall solution.
You can read more about that in the
Considerations for server-side Automation of Office article.
Consider using the Open XML SDK, see
Welcome to the Open XML SDK 2.5 for Office . Also any third-party components can be used instead.

Requirements Gateway: Visio - COM error

Dear Developers!
I have a problem using Visio files in Requirements Gateway 1.1: when I open the example project ('Visio Example.rqtf) this info is shown:
Error: COM error (Class not registered)
Error: Conversion problem (file ...\Visio Example.vsd)
The operation system is Windiws Server Standard SP1. There is no full version Visio installed only Microsoft Office Visio Viewer 2007. Could this be the problem, or should I change some configuration of the Requirements Gatewaw?
Knáb László

You can perform traceability analysis on Visio documents by capturing
traceability information from the custom properties in Visio 2003 or shape
data in Visio 2007 or by creating references in the Graphical View in
Requirements Gateway.
(Excerp from "Coupling Microsoft Visio with NI Requirements Gateway")
Hm, i would say your guess is quite promissing: you will need i full version of Visio in order to get it to work since ther is nothing said about Visio Viewer.
Maybe you can get some kind of evaluation version for Visio in order to test this.
thanks,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Optimizer run error - COM error 2 1 when deleting transportation orders

Hi Experts,
Optimizer run job (program /SAPAPO/RMSNPOPT) gets failed with following error: -
COM error 2 1 when deleting transportation orders
Can anybody let us know why this error occurs and how to resolve it. Thanks a lot.
Regards,
Chandan

Hi Chandan,
Could you check SAP note 1232670 whether applicable
for you
Regards
R. Senthil Mareeswaran.

HT4802 I want to update m'y iPad with my MacBook pro it com error 9003

I want to update m'y iPad with my MacBook pro it com error 9003

You can share the files via your iCloud account, if they are Pages or Numbers files. You can email them as attachments to the other person, or provide them on a flash drive so they can import them on their computer.
I would not try to copy the files direct from my computer to someone else's iPad.

COM-Error unkown while displaying the product view

Hello,
In our SCM 7.0 system we call the transaction "/sapapo/rrp3".
Enter Plng Version.
Enter Product .
Enter Location .
After pressing enter the system gives the error message:
COM - error unknown
Message no. /SAPAPO/OM001
A COM routine has encountered a program error.
The program will be terminated.
How can we solve this problem and show the product view?
Thanks in advance,
Yasar Pala

Hi,
If the consistency check doesn't help, please see if the below notes are relevant to you.
Note 1349834 - COM error in Product view for configurable material
Note 1235835 - //RRP3 dumps in tab 'Forecasts' when values are negative.
Regards,
Senthilrajan

COM error on Vista

Similar Messages

Maybe you are looking for