COM License Bridge

Hai To All,
Does anyone have idea abt the COM License Bridge to CORBA License Manager????????????////
How to apply in our Addon??? and How to check our Addon????
Regards,
Anitha

Dear ani nazir,
The add-on license is like the B1 license that one license is assigned to one user.
The difference is that the B1 license has two concurrent constraint for one user, but add-on license does not have this constraint.
For example, the B1 user 'manager' can use B1 with two instance concurrently, however, it still is one user.
If you give one customer two licenses, then the customer can assign two user to use the license, but there are not concurrent constraint, means that multiple instance for one user can use the add-on concurrently.
But If the add-on is used in B1 application(UI API add-on), the user will have two concurrent constraint for use B1 license.

Similar Messages

COM License bridge :addons works fine on server side but not on client side

hi,
i'm using the com license bridge to fetch license information for my addon. When i start my addon on the server where the license bridge was installed and registered everything works fine.
But when i start my addon at client side the following error occurs:
System.Runtime.InteropServices.COMException(0x80040154): Retrieving
the COM class factory for component wiht CLSID
{80D2BE0E-15FF-4793-A4DE-0C053B19D0A} failed due to the following
error: 80040154
at WindowsApplication1.CLicense..ctor()
Can anybody help me?
thanks
Markus

Hi,
The following is written in the COM License Bridge documentation in SDN (https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/508623e3-425c-2910-38be-cbe56e65930c):
"Please note that the COM License Bridge will only work on the system where the actual License Service is running."
Regards
Trinidad.

COM License Bridge for Busienss One 8.81

I have tried using the existing COM License Bridge from 8.8 and it does not work. I also need one that won't expire in 90 days. All I need to do is get the hardware key of the license server programmatically. How can I do this in 8.81?

I have managed to create my own interface to the license server using IIOP.NET:
http://stackoverflow.com/questions/6031381/how-to-access-corba-interface-without-idl-or-late-bound-invoke-remoting-methods/6048136#6048136

COM License Bridge support in 8.8

Hi
I am migrating a system from 2005A to 8.8. There is an existing console program that connects with the license API using the COM License Bridge. This does not seem to work any longer with 8.8. Does anyone have any experience with the COM license bridge and 8.8? Is it the case that I will have to rewrite my program and recompile to handle any differences in the API?
Thanks.

Hi,
A new version of the COM License Bridge for B1 8.8 is already availabe in SDN:
http://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/007a9ef5-9a9c-2d10-f3bc-94f765f235ce
Hope it helps
Trinidad.

COM License Bridge Serious Problem

Dear SAP Forum Team,
I am facing serious problem .
We have developed an Addon .
For restricted use , i have used COM Bridge License of 8.8 for controlling
Add-on user also put some validation so that it cannot be used by other company using COM bridge.
Addon is working fine on B1 Server but when it is used at B1 client, addon
is getting stopped.
This is because on Client m/c COM Bridge is not working
Operating System is Windows Server 2008 R2 Standard
I am clueless what to do.
Any help from you will be greatly appreciated

Hi,
Install your client Machine COM License bridge setup.
Regards,
siva

Com Corba Bridge

Does anyone succesfully use EJB or CORBA
with the Oracle Com Corba Bridge
on Oracle 8.1.6?

In case anyone else is looking at the License API, I've been asking SAP support these questions also, and they've confirmed that the License API is still available in 8.8, is still CORBA based, and that SAP has no developer documentation or other information on it at all apart from the example bridge to COM code. They also say that they will not support any issues with the bridge.
So, I'm left with two sets of questions really - one set is around the commercials and licensing of samples on the SDN site here (my questions about the license terms that appear when you download the bridge, and about redistribution). The other set is around ownership and maintenance of the bridge - if it isn't an official SAP supported component, it would seem if we used it we are at the mercy of whoever is maintaining it in terms of support and maintenance, presumably only contactable through this forum.
This isn't a big problem necessarily. As long as the License API itself continues to be supported by SAP we could create our own solution if we found the bridge was abandoned. The lack of documentation on the CORBA interface is a problem, but I could probably reverse engineer it from the sample bridge code if only I had the missing files from the source download!
So, has the bridge been abandond? Who is maintaining it if not? Could they provide me with the missing files?
Regards,
Greg

Adobe Creative Cloud/Photography: does it come with Bridge?

Does anyone know if Adobe Creative Cloud/Photography comes with Bridge?

Yes, it does.
I've found that Adobe has put lots of effort into pushing Photoshop and Lightroom as part of that plan but does not fully explain the entire plan anywhere convenient.
Think through how you'll use them: Should I use Lightroom or Bridge? | The Complete Picture with Julieanne Kost | Adobe TV
Full list of inclusions here: Adobe Sets Permanent Plan Discount for Photoshop CC + Lightroom | ProDesignTools

Does the trial Dreamweaver come with Bridge?

Hello
I am using the tiral version of Dreamweaver and trying to access Bridge. Have downloaded 3 times and the pop up still says it is not available. I have not read anywhere that it would be not part of the trial and have read where Dreamweaver in its entire purchase version is the same as the trial version.
Thank you
angel

Thank you for your time in answering but it does. I am taking a class on it and chapter 4 is all about DW using Bridge
Date: Sun, 20 Jan 2013 01:53:10 -0700
From: [email protected]
To: [email protected]
Subject: Does the trial Dreamweaver come with Bridge?
    Re: Does the trial Dreamweaver come with Bridge?
    created by Mylenium in Trial Download & Install FAQ - View the full discussion
DW doesn't use Bridge. Mylenium
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5007977#5007977
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5007977#5007977
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5007977#5007977. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Trial Download & Install FAQ by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Does CC Photoshop come with Bridge?

I want to know if the CC Photoshop/Lightroom package comes with Bridge.

Dear duggardeb
yes, photoshop CC come with bridge,
regards
deto

How come CS4 Bridge does not offer Photoshop batch operations?

I have had tons of problems with CS4 on my desktop PC but seem to have most of them resolved with a new video card and updated driver except this one. If it matters I'm running Windows XP service pack 3, 4gb of RAM of which 3.4 is available. It has an 2.67 GHz Intel Core2Duo cpu.
While in Bridge, under the "tools" menu, there no longer appears an option for batch operations such as I had with CS3. In CS3 it was the bottom option of all those listed. The only batch operation offered in CS4 is batch rename. I want to run Photoshop actions on multiple images selected in Bridge but cannot since this option is not being offered.
I have deleted preferences and rebuilt them several times, and uninstalled and reinstalled Photoshop itself so many times that the CD is almost worn out. I have also upgraded CS4 to the latest upgrade on the Adobe site, 11.0.1.
I've done everything I can find to do but still not fixed. Anybody out there know the answer? This has not been a smooth transition and is very frustrating.
Thanks

OK, let's see how good you REALLY are...here's a new one. Well actually not
a new one, but it went away for so long I thought all the other things I've
done corrected it (CS4 update and video driver update). It's back with a
vengeance.
The brush tool stops working for no apparent reason. If I shut down
Photoshop and restart, it works. As long as I'm working on an image, it
works. Sometimes it will continue to work for several images. Other times
it will not work on the very next image opened. Earlier today it worked
fine for multiple images until I printed some, then stopped. I thought it
had something to do with printing so I shut down, restarted and worked
without making any prints. Again worked OK for a while and then stopped.
This is true for all brush type tools...paintbrush, clone, healing, etc. It
seemed like if I opened files directly from Photoshop instead of via bridge
that I had more success but now this evening it will only allow me to work
on a single image. If I close an image and open a new one, no brush
function no matter how I open it. This is just the way it acted up before
but then went dormant as I noted above.
There is no pattern or repeatability to it that can help me home in. By
that I mean, tomorrow it may indeed work fine for hours and then go wacky
again or it may go wacky on the first image. I thought it may have been a
RAM or some other cumulative type problem but this is shot down by the fact
that it will at times stop working immediately while other times work for a
long time.
I'm at the point where the only thing I can think of is it must be the
computer. I installed CS4 on an old clunky laptop and it works fine. I
installed the 30 day free version on this e-mail computer just as a test and
again it worked fine. On my super duper photo editing PC, it just won't go.
I didn't realize that I'd have to add the cost of a new computer into the
cost of upgrading to CS4 because the computer is not that old and definitely
not a clunker as noted in my original post. I'm already out about $200 for
two new video cards and still no luck.
Any ideas?
JR

License API and Corba to COM bridge

Guys,
We'd like our B1 tool (uses DI API and DI Server) to be able to get from the B1 license server how many licensed users there are (professional users). With a bit of investigation, I've found that there is a License API, however being CORBA based it isn't something we can easily use with our technology (being COM and .NET based).
I have found the "COM License Bridge to CORBA License Manager 2005" installer, samples and source code. I have tried this on a B1 2007 test box and it seems to work. I have a few questions, which hopefully someone here may be able to answer or at least point me in the right direction.
1) What are the license terms for the bridge? On the download page ([http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/1037666e-56e9-2b10-1588-cba9157a83e2 [original link is broken]|http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/1037666e-56e9-2b10-1588-cba9157a83e2 [original link is broken]]) it indicates that the bridge is under some sort of 90 day evaluation license. Do we have to apply for a full license for it from SAP to use it? How do we do that?
2) Are we able to redistribute the bridge as part of our commercial package? Do we have to use the supplied installer, or can we incorporate the bridge executable into our own installer?
3) Is this bridge officially supported and maintained by SAP? Can we log issues with SAP support with it? Will it have any necessary changes made to it for 8.8?
4) On the license API itself, will this continue to be available within 8.8?
5) The download page has an option to download the source. Now, I understand that if we decided to recompile ourselves, or use the source as a basis for our own CORBA based solution, we'd be on our own (and we have to get hold of the necessary open source libraries). However, the supplied code seems to be missing two files (LicenseInterfaceC.cpp and LicenseInterfaceC.h). Where do I get these files from? (I have already asked this question on Lisa Mulchinock's blog at [http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414800)ID1613217250DB01810329660145726482End?blog=/pub/wlg/13891] so sorry for the duplication on this one)
Regards,
Greg

In case anyone else is looking at the License API, I've been asking SAP support these questions also, and they've confirmed that the License API is still available in 8.8, is still CORBA based, and that SAP has no developer documentation or other information on it at all apart from the example bridge to COM code. They also say that they will not support any issues with the bridge.
So, I'm left with two sets of questions really - one set is around the commercials and licensing of samples on the SDN site here (my questions about the license terms that appear when you download the bridge, and about redistribution). The other set is around ownership and maintenance of the bridge - if it isn't an official SAP supported component, it would seem if we used it we are at the mercy of whoever is maintaining it in terms of support and maintenance, presumably only contactable through this forum.
This isn't a big problem necessarily. As long as the License API itself continues to be supported by SAP we could create our own solution if we found the bridge was abandoned. The lack of documentation on the CORBA interface is a problem, but I could probably reverse engineer it from the sample bridge code if only I had the missing files from the source download!
So, has the bridge been abandond? Who is maintaining it if not? Could they provide me with the missing files?
Regards,
Greg

Retrieving the COM class factory error-80070005

Hai,
I created web application in that I connected to company and used SBO Com license bridge ie., Gethardwarekey() . It works fine in our place. When it is launched it shows following error.
Retrieving the COM class factory for component with CLSID {80D2BE0E-15FF-4793-A4DE-0C053B194D0A} failed due to the following error: 80070005
I have set enable 32 bit as true.
Any help is appreciated.
Thanks in advance.

Friend you solved it? please share the solution
many Thanks

Gettin SAP license and total numer license for my Addon

Hi,
i need from my addon to read:
1. license sap number
2. total license number for my addon
I see these information in the license administration form in B1 client.
First is in the 'Allocation' tab, License field.
Second ins in the 'Components' tab 'total number' field selecting my addon from 'license components' grid.
How do i get them ?
thank you
Paolo

Hi Edward,
I already checked SAP Business One License API, but it was a little unclear to me.
I found this blog post:
SAP Business One License API
It's almost 3 years old, is still valid? Is there something newer?
Talks about 'COM License Bridge'.
Where do i have to install it? On develompment machine or on SAP B1 server? I guess B1 server.
Furthermore, in the post i read 'It's important to Note that it will only work on the system where the License Service is running'
Is this still true?
I need to access licence information from the client when the addon starts, not from the server.
Is there any other solution?
Thank you
Paolo

Get hardwarekey

hi,
how can i get hardwarekey, installno, systemno by sdk?
I tried the external api (com license bridge) but the returned values are empty.
Has anybody a solution for sap 8.8?
Maybe i can find the values in any tables?
best regards
Markus

Hello
Try UI API Company Object which an SBO_Application.Company
oUICompany.InstallationId()
oUICompany.SystemId()
Regadrs
János

Configuring JMS Bridges between COM and SOM

Hi,
We started working on OSM 7.0.2 and I have a question about the configuration of JMS Bridges between COM and SOM.
When COM and SOM Cartridges are installed in the same OSM instance on non-cluster env., it is mandatory to configure JMS Bridges between COM and SOM?
If it is case, could you please detail the procedure to follow?
In the document called "Application Integration Architecture Order-to-Activate Cartridge Guide Release 7.0.2 E18005-01" it is not obvious to understand. If you have a look in the table 2-1 page 2-15, I don't see all the mandatory field values to create a new destination bridges (for instance, what is the value of destination JNDI name?). Does anyone configure this part in the setting up OSM to the Order-to-Activate Solution?
Best regards.

The COM-SOM bridge is only required when COM and SOM are deployed on separate osm server instances and AIA Emulators are deployed (on both) for development/demo/quick testing purposes.
In QA/SIT/PRODUCTION environments, OSM should be integrated via AIA, this means that all participant applications ( CRM , OSM-COM, OMS-SOM, BRM ) should be using queue bridges (or SAF in 7.0.3)

COM License Bridge

Similar Messages

Maybe you are looking for