Com port failed with boot camp and snow leopard - Please help!

Hi. I have been a very happy leopard and macbook user for the last couple of years. This week I upgraded to a macbook pro with OS X 10.6 snow leopard. I set up boot camp with Windows XP SP3as I have a couple of windows only applications that I need to use and they both need serial port. I had a Keyspan USA 19-QW serial adaptor that worked fine with Leopard and my old macbook. I installed the driver that came with the Keyspan adaptor. Now when I plug the adaptor into the USB slot it finds new hardware and says it is ready to use and the adaptor is listed in my ports as being on COM3 in device manager in windows but when I try to run the programs I get the message 'the selected port could not be opened. Either the port is in use by another application, or the port doesn't exist'. I'd be very grateful for any advice you can give me to solve this problem. Do I need to buy a new adaptor? Is this a settings or driver issue? I'm a user and not a techie person so please can you leave me easy step by step help. Many thanks. Karen

And was wodering if snow Leopard is pré installed
Yes.
And also which disc that came with thé machine has boot camp on it
None. Windows is a separate purchase.
i havé read that to install windows7 you need to pût thé snow leopard disc in to complete thé installation
That refers to the Boot Camp drivers for Windows, not Windows itself.
(53272)

Similar Messages

Install Leopard with boot camp on snow leopard.

I upgraded to Snow Leopard and have a piece of line 6 hardware that is not compatible. Updated drivers are taking forever to come out and I need to use this hardware. I'm wondering if it would be possible to use boot camp to install leopard from the installation disk included with my macbook so that I can boot to it to use the line 6 device.
Any help would be appreciated.

The easiest way is to use Disk Utility in the Utilities folder to create a 2 partition set up. Disk Utility will be able to do this without erasing your existing information.
- Select your volume the one with the disk size at the top
- Click on Partition
- Change the Volume Scheme to 2 partitions
- Answer any messages and such
I am sorry since I have mine partitioned with BootCamp for my Windows 7 partition, I am unable to describe all of the steps as BootCamp locks me out of performing the rest of the steps.

Freezing iMac with both Tiger and now Leopard PLEASE HELP!!

Hello,
Our 1st gen 24" iMac was giving us Kernal Panics under Tiger 10.4.11 recently it all started two months ago.
We took it into the Apple store for a Cleaning and fresh install of Leopard.
When we received it back it locked/froze up immediately, forcing a hard restart. When I called the store they said one of my sticks of ram was not techinically bad but still suspect.
This is what I did after that call.
1. Checked the ram physically (the Apple store had placed my 512mb Apple ram stick in slot 1) which I thought very strange.
2. I corrected the ram, meaning I put the 2gb (suspect) stick in slot 0 and the 512 Apple ram in slot 1. Things were better it would take 10-15 minutes of use before locking up not 1-2 minutes.
3. I placed a new stick of Crucial (2gb from OWC) in place of the supect stick. that has had ZERO affect, our mac still freezes.
4. I pulled out the 512mb Apple (Micron) ram and replaced it with a 1gb Micron stick from OWC and that gives us roughly 20-40 minutes of time befroe freezing.
The software is up to date, I've max'd out the ram (at Apple's request) and all we have running is iTunes in the background to stream to AppleTV and a few tabs of Safari open when this locks up.
Right before it freezes we notice lines arcoss the application windows almost as though there a distorted pixels.
If any of you Mac Gods can help guide me in the right direction I would greatly appreciate it!
Thanks

Thanks, they did test the HD and booted from an external when I had it at the store, so maybe it is the Logic Board. That would suck bad!

I can't read in Mavericks DVDs and Bluray data burn with UDF system files burn with Snow Leopard, please help me. Thanks

i can't read in Mavericks DVDs and Bluray data burn with UDF system files burn with Snow Leopard, please help me. Thanks

They are DVDs with video files from a little more than 2 GB per file, were burned in Snow Leopard, with UDF file system, now that I updated to Mavericks when I try to read disks displays the directory in the finder a moment and then disappear and does not display them show them more. It is impossible to read the discs, but only those who were burned with UDF file system. Thank you for your help.

Can I use Windows XP Home with Boot Camp and/or Parallels or VMFusion?

I am planning on purchasing a new Mac Mini with Snow Leopard. I have a copy of Windows XP Home Edition that came with a 7 year old Compac computer, can it be used with either Boot Camp and/or Parallels or VMFusion? I REALLY don't want to purchase Windows if I can help it. Thanks!

Read the boot camp requirements. I believe you will need a Windows disc that is stand alone. By that I mean a Windows disc that is not designed for a specific computer like your Compac. I believe that applies for Parallels and Fusion as well. Some of the newer disc that come with new computers may work since some of them are stand alone. I think your compac disc maybe married to your computer. You can try it when you get your Mac but it may not work.

Problems with Boot Camp and Drive Partition

First of all, let me preface this by saying I have in the past successfully partitioned my drive and installed Windows, but it was a while back and I can remember it was frustrating, but I don't remember the exact details. Also, I apologize for the rambling nature of this problem, but I'm trying to give as much relevant information as possible and walk through the steps I took to get where I am now.
Feel free to skip ahead to the end, the main problem seems to be I tried to create a 300 GB partition, but it didn't take or something. Now my storage is reflecting I've lost 300 GB, but it won't recognize the existence of the new partition.
Let me just walk through what I did. I deleted my previous partition because I was having some difficulties with a few programs and the partition ended up being too small and I wanted to make a bigger one anyway. I only use it for gaming and didn't care about any of the saved games so I just deleted the partition and figured I'd start over from scratch.
Before I begin, some technical details about the computer I'm working with. I don't know how much of this is necessary, but here it is:
It's a 27-inch late 2012 iMac with a 3.4 GHz Intel Core i7 processor with 24GB RAM running OSX 10.9.4
The storage space is a little more difficult as that is part of the problem I'm running into, which I'll get to in a minute.
Anyway, I have a Windows 7 Professional install DVD and a burned CD called Boot Camp, which I think is the drivers from last time I installed Windows (a year and half ago?), but since I needed Superdrive for the install DVD I just used an XHD I had to put the drivers on (like I said, I don't remember how I did it last time). I go through Boot Camp and look at how much space I have and how big I want to make my partition.
Side note: Last time I made my partition, I'm fairly certain I set it to 200 GB, but the partition size actually came out to something like 112 GB or something significantly less. I didn't know what happened, but figured it would still be enough space and it had been such a hassle I didn't bother doing it again.
Supposedly I have a 1 TB HD, and I can't remember exactly what it said when I partitioned the drive this time, but it definitely said I was using less than half of my capacity and I had plenty of room, so I opted to go for a 301 GB partition (the slider wouldn't let me do exactly 300) which still left me with around 300 GB of space left over on my Mac partition I want to say. I went ahead with it and it started partitioning the drive with the blue line moving very slowly and after an hour or so it was like 80% across but no longer making progress. I looked online and people said that shouldn't happen. I cancelled the partition and the Disk Utility showed the partition, but said it was unmounted or something.
I restarted my computer thinking maybe I'd try and see what would happen if I tried to boot it up as if I had Windows installed. I also at that moment remembered that I'd had a similar problem last time because I had my XHD plugged into my USB port so I unplugged that and held down OPT. It then showed me my Mac HD drive and a CD icon that said Windows, so I clicked on that figuring maybe I could install it after all.
It led me through a Install manager and it got to the point where it asked what drive/partition do you want to install Windows in, I recognized the screen and remembered I was supposed to choose a certain one, but couldn't remember which one and none of the sizes seemed to match the storage I had allocated to the partition. One was about 200 GB and since the last time I did it my partition came out 100 GB smaller than I had set it for I thought maybe that was it.
However, it said I couldn't install on that drive for some reason (I can't remember exactly what it said). So I restarted again and figured I'd go back and see what I did wrong and start over. When I check Disk Utility it no longer sees any partition (mounted or unmounted or anything) and that the entirety of my HD is dedicated to Mac HD.
The problem is, now I'm getting weird reports about the size of my drive, the amount used, and the space available. Disk Utility tells me I have 1.12 TB capacity, 301 GB available, and 819 GB used. That doesn't even add up. Furthermore, when I click get info on Macintosh HD, it tells me I have 810 GB capacity, 364 GB available, and 446 GB used. When I click on About this Mac and go to System Report and storage I get this:
Macintosh HD
Available: 364 GB
Capacity: 810 GB
Logical Volume Group:
     Name: Macintosh HD
     Size: 1.12 TB
     Freespace: 301 GB
Physical Volumes:
     disk0s2:
   size: 121 GB
     disk1s2:
     size: 999 GB
Now I really don't know what to make of it. That 301 GB free space makes sense as the partition I tried to create and if I add that to the 446 GB used on my Mac partition, plus the 364 GB available, that adds up to 1.12 TB (roughly, I've rounded off these numbers).
But how come Disk Utility doesn't recognize the partition then? What should I do from here?
I couldn't find anyone asking this exact type of question or running into this same problem before, so I hope I'm not asking about something that's already been answered. If that's the case, if you could direct me to where I can find the answer I'd be appreciative.
Otherwise, any help or light that can be shed would be most appreciated.
Thanks!

The problem seems to have gone away. I did click on repair disk in Disk Utility, I'm not sure if that did anything, but now when I run Boot Camp Assistant it is showing me the correct free space, so I don't know what happened. Oh well.
Still having trouble getting the **** thing to partition, but that topic is covered extensively elsewhere.

Problems with Boot camp and External HDD's

Hi, I recently installed windows XP using Boot Camp, and everything worked fine, until yesterday when I tried to reboot into MAC from WINDOWS. It restarts back into windows everytime, and now I can't get back to mac! (using leopard, not snow leopard) Whats wrong?
Another thing, I have a 500gb Lacie ext HDD, and I can use it fine with mac, but when I tried to access it with windows, it won't work. It will appear in My Computer but when I log in it won't access the data. What can I do?
Im using the HDD for backups with time machine, is this why windows cant access it?
Thanks in advance

FAT32 will accessible from both Windows and OS X
If you don't want to reformat your ext drive you need something like http://www.paragon-software.com/home/hfs-windows/ or http://www.mediafour.com/products/macdrive/

Need help with Boot Camp and Win 7

I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp. I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1. That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
Thanks.
Mike

Mike,
I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
https://discussions.apple.com/community/windows_software/boot_camp
Roger

Installed windows 7 with Boot camp and now cannot get back to OS x x

Have installed Windows 7 with Boot Camp on a 20" 2006 iMac running X 6.8. Now cannot get back to original OS. Tried Snow Leopard in drive and holding c and various other keys at start up but still Windows. Any ideas?

Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"OPTION" key.
3. Release the key when the boot manager appears.
4. Select the disk icon for OS X.
5. Click on the arrow button below the icon.

I have a problem with boot camp and maybe macbook pro?

I am having issues with boot camp here is what I did.
I attempted to partition for windows then this message popped up after 2 minutes:
Verification failed. this disk could not be partitioned.
Use Disk Utility to repair this disk.
so I used the disk utility to repair the problem then this message came:
First Aid failed
Disk Utility stopped verifying “Macintosh HD” because the following error was encountered:
The underlying task reported failure on exit
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Incorrect block count for file Temp File
(It should be 13 instead of 0)
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume bitmap.
pair",0)
Checking volume information.
Invalid volume free block count
(It should be 23087569 instead of 23087570)
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
So let me explain something. I just got the macbook pro put some music on it and pictures. so what do I do to fix this problem? please let me know.

Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If you are unable to repair the drive then you will need to reformat the drive using Disk Utility. Of course this will erase all your files so have a backup before you start.
Basic Backup
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore. Also read How to Back Up and Restore Your Files.

Problem with boot camp and windows 8

I have a Macbook late 2009 with Mountain Lion. I want to install windows 8 with boot camp but when I am asked to enter drivers, windows 8 don't find them. I have downloaded drivers from boot camp assistant but they don't work. When Apple will provide ???

Obviously Boot Camp does not support Win 8 at this time. When and IF Apple decides to do that no one here knows. This is a user to user forum. Perhaps you should call Apple support and ask them.

Installing Windows 7 RC1 with Boot Camp AND Parallels?

I have a 24" iMac (2009 model) and have successfully installing Windows 7 RC1 using Boot Camp. No problems at all and everything is working fine. But now I'm contemplating purchasing Parallels and using Windows 7 in a window.
I just need to know the steps involved and how this works. First I purchase and install Parallels. Then I run it and somehow tell it to use my Boot Camp partition for the VM, right? In this way, I'm assuming I don't actually have to install Windows 7 again or make another partition, right? Once I get the VM installed, then I can either boot to Windows 7 from startup OR boot from within Mac OS using Parallels and it would be the same?
If I can do it this way, can anyone point me to step-by-step instructions on how to choose the right settings in Parallels? I have found instructions for installing Windows 7 using Boot Camp and Parallels separately, but not how to use the Boot Camp install for the VM in Parallels.

Wow, it was much easier than I thought it would be! Downloaded the trial of Parallels. Installed it and pointed it to my Boot Camp partition with Windows 7 installed on it. And minutes later, I'm up and running with Windows 7 in Parallels. Sound didn't work at first, but after I did a Windows Update, it installed the correct driver and now everything is working great. I can't believe how smooth this thing runs within Leopard. I allocated 1GB of RAM for WIndows 7 and it's seems fine so far, but I really haven't run any resource-intensive apps yet.

Using built-in iSight with Boot Camp and Yahoo Messenger

Has anyone had a problem using Yahoo Messenger video conferencing by using the iSight?? It shows up as a USB device in the windows hardware but Yahoo says it isn't available. I can use the camera with other programs though. The camera works perfectly on the MAC side (of course). I can't figure out why I can use it for other programs but not Yahoo messenger. Any ideas.
Thanks

Welcome to Apple discussions, DualOSuser
I no longer use YM in any OS, so I have no problems with it.
If your only problem is with Yahoo video, have you checked a Yahoo Help search like this one? Yahoo should be able to give you the best help either to tell you how to make their software work with your system or to tell you the limitations of their software.
You could also check Windows Help in case the problem might be with Windows.
If you think the problem might be with Boot Camp, try searching Boot Camp Discussions.
If you get no help via any of those alternatives, when you post back here for other ideas, tell us which Windows and YM versions you are using. Some Windows user may be able to offer suggestions based on your additional details.
Cheers,
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight

Boot Camp on Snow Leopard can't install Windows-Stuck on black BIOS screen

I'm running Snow Leopard 10.6.8 on an early 2008 Mac Pro (dual 3.2Ghz Harperton CPU's, 10gb RAM) with Boot Camp version 3.0.4 (all updated). I've successfully had a Boot Camp partition in the past, running WindowsXP32 Bit. I just purchased Windows7 Professional and can't install either the 32bit or 64 bit version. Neither can I install any of my original Windows disc. Boot Camp successfully creates the partion, then asks me to install the Windows install DVD/CD which I do, and then when it reboots, it gets stuck in a black BIOS screen that says "Initializing..."
I've tried all my Windows discs: WindowsXP-32bit, Vista-32Bit, Vista-64Bit, Windows7-32Bit, Windows7-64Bit. Same problem...gets hung on the black BIOS screen. I disconnected all my USB hardware except for my keyboard/mouse. All my other internal drives are disconnected.
The only thing that I can think of is that is different is my MacHD is a 500GB Seagate MomentusXT solid state hybrid drive.
Any help is greatly appreciated!!!!!!!
Thanks

Hi fellow Mac buddie,
I just zapped the PRAM, and also reset the SMC switch on the mother board.....no luck.
In refenece to the hybrid SSD drive, I've already taken that one out, put in a fresh 3.5" drive, formatted and installed a fresh clean version of Lion OS, and then attempted the Boot Camp install using Lion with the newest Boot Camp version (3.1 or 3.2) Please see my original post above.
Same issue, black BIOS screen.
Also tried Boot Camp Windows install on a second drive in drive bay 2 (an option now in Lion's Boot Camp)
same issue, black BIOS screen.
Lastly, I've tried all these interations using my three different Windows install disks (XP, Vista, Windows7).
XP is a "full install" disk, Vista and Windows7 are upgrade disks. But I've had XP installed previously using Boot Camp with no problem. So I'm confused I can't even install XP.
As another option, I went to a friend who has a PC, and I installed Windows 7 on a new hard drive. I'm about to install that in drive bay 2, reboot while holding down "option", and see if I can boot directly into that disk.
That's a workaround, as is VMWare Fusion which I have and Windows7 works fine as a virtual machine.
But when something doesn't work the way it's supposed to (in this case Boot Camp), it bugs me makes me want to know why it doesn't. I'll report back with regard to the 2nd bay Windows7 hard drive install.
SPY500

How to set up AA3 on a mac with Boot Camp (radio production guys please take note!)

Hi,
I'm the imaging director for some of the Providence Citadel Stations and I want to move all of my production over from PC to a spiffy new iMac.
I know I can run AA3 through boot camp, but as of yet haven't purchased anything until I find out the best way to do this.
I'd love all of your suggestions on what to get and what set up is working for you. I'm done with PC's so don't even bother suggestion it!
My plan is to get an iMac, run boot camp and run windows XP (still available for $89 OEM version from new egg) and move all of my files over using a very large external drive.
Am I crazy?
By the way, the reason I'm doing this is that my current PC is starting to show signs of not being fast enough for AA3 and the plugins, etc.
Okay...I await your advice!
Thanks in advance.

Well, certainly your computer choice is personal - no issue with that - but to claim that a Mac is going to outperform a PC at a comparable price point is something that I don't believe can be verified.
I also build and upgrade my own systems and don't see any particular cost saving over an off-the-shelf model; I just do it because I can design the system exactly the way I want.
Boot Camp is an...interesting...idea but seems overly complicated. Why would anyone want to be required to boot back and forth between operating systems is beyond me, but that's a personal choice.
It just seems vastly more efficient to stick with Microsoft if you love Audition as much as you do. But, if you prefer the Mac OS, Pro Tools LE for the Mac and Apple's Logic are fantastic choices for recording and editing audio.
I'm not really trying to get you to consider PC over Mac but you've made a performance claim that I think has no basis in fact.
Like I said earlier: I run multiple audio editing programs on my PC (AA 3.0 among them) and these programs fly on my PC.

Com port failed with boot camp and snow leopard - Please help!

Similar Messages

Maybe you are looking for