Comb field  - some combs are darker than others

I'm having problems creating text fields that have combs. Some of the combs appear with darker border lines than others. How do I resolve this issue?

Thank you both.  I think I have resolved the issue with your advice.  Each page has a logo on, and some have transparency.  I can flatten these and it seems to work!
Thank you!

Similar Messages

  • HT3964 Backlit keyboard: some keys are brighter than others. Can this be fixed?

    I spilled a small amount of liquid on the key board, but I quickly dried it and everything works fine except the keyboard. Some keys are brighter than others, what should I do?

    Hope that it is the only problem that you will have with your MBP.  Liquids have a habit of quickly migrating and you may or may not have gotten it all.  I would take it to an Apple genius bar and have them check it out.  That does not mean that your MBP will not suffer a premature death.
    As far as the keyboard is concerned, pose that question to the genius bar technician.. I suspect you will be told that the only way to rectify the problem is to install a new one.
    Ciao.

  • Some albums are quieter than others

    This has just happened in recent. I've never had problems with volume, but strangely some albums are losing volume. They used to be loud, but now the volume is down for them. Some albums volume has stayed the same, but others are becoming more quiet. I tried closing the apps, turning my iPad off and on. is anyone else experiencing volume loss with their music?

    Nevermind. I was stupid and forgot I switched on soundcheck. Fixed it

  • Elements 10, windows 8, 64 bit, epson artisan 835 printer: prints are really dark even after using enhancements like adjusting lighting. Prints are darker than photoshop edit screen. Prints are acceptable using paint, windows photo viewer, or gallery.

    Elements 10, Windows 8, 64 bit, Epson Artisan 835 printer: Prints are really dark even after applying enhancements, like adjusting lighting. Prints are darker than Photoshop Edit Screen. Prints are acceptable using Paint, Windows Photoviewer, or Photo Gallery.

    In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
    That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
    Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
    Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
    While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
    Hunt

  • Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?

    Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?

    Thanks. I can change the forwarding settings in Gmail to be either POP or IMAP. That is quite simple. I just looked at those settings on the Gmail server and, to my surprise, both are enabled. In order for outlook client on my computer to receive IMAP emails I have to change the email account settings in my current outlook from POP to IMAP. I don't need to be using the Exchange version of Outlook to receive IMAP. I guess I'll do a little research tomorrow on Exchange so i can figure out what, if anything, it might do for me.
    I glanced at the link you sent me and it looks like it might be very helpful - another project for tomorrow.
    BTW: I hit "This Solved my Question" by accident. I meant only to "like' your response so you would get some benefit from the help you've given me so far. I hope I haven't discouraged others from taking a shot at helping me. I suspect there is more than one way to approach this and, as you know, my problem isn't really solved until I have what I need all set up and running smoothly.

  • Is it normal for a waveform graph to truncate arrays of values that are longer than others when displaying multiple waveforms on the same graph?

    I am reading back values of several waveforms that were saved to disk using the write to spreadsheet vi. Some of the data sets are longer than others eg. 35 seconds vs 45 seconds. All have the same sample rate.
    See the code segment below. If I select the larger files first then all the data will show. If I select a smaller file first the larger ones will be truncated to the size of the small file. I am using LV 7.0.
    Attachments:
    codesnippet.vi ‏41 KB

    I needed to make some grammatical/ nomelclature changes, But, Could not edit the previous post.
    so posting again
    "Thats because you are inserting into an array of a predefined size.
    For ex,
    When you try inseting a 1D array 'A' of 50 elements as row 1 of a  2 D array of 40 elements(in row 0 ), only only the first 40 elements will get insetred into 2 D array. You lose the last 10 elements of array 'A'
    To avoid this, I suggest you use XY graph( of course you have to create an x axis with the index of each element in the inserted array and plot on xy graph).
    Any doubts, do get back"
    regards
    Dev

  • How do I get the volume on my ipod classic to the same level for all songs?  Some are louder than others.

    How do I get the volume on my ipod classic to the same level for all songs?  Some songs are a lot lower than others.

    Coverflow in iTunes is sorted by Album Artist whereas coverflow on the iPod classic is sorted by Artist. Unfortunately, there is no way to set this on your iPod. This is such a fumble on Apple's part that I'm beginning to think they're becoming another Microsloth with buggy firmware and products.

  • Prints are darker than what appears on PC screen

    Windows Vista Business OS
    Acer laptop PC
    PSE6
    Good morning.
    I'm so hoping that someone has an easy solution to this printing issue.
    In PSE6, I've created 85 scrapbook poem pages in the following format:  300 dpi; 12 x 12 size that will be reduced to a print size of 8 x8.
    I worked all summer on this project for my 98-year young grandma who is the author of these poems.   Gram is spry and healthy, but given her age, we are both concerned that it will take a long time to remedy the problem - if the only solution to lighten is to go through each layer of all 85 pages and reset the light intensity.  As she says in jest, "time" is really not on her side.  This is our second poem book project - the first was handmade scrapbook poem pages that were printed directly from a UPS copycenter printer.
    For this second project, I printed some test copies of a couple of pages on my inkjet Lexmark printer.  Photo quality paper:  the printed copy was much darker than what appeared on the laptop PC screen - details couldn't be distinguished. Lower quality paper:  the printed copy had a faded looking print.
    I will be taking the PDF format of the pages to the UPS copycenter, again.  I've been told that the prints can be lightened, however, I'm concerned that the quality of the print will be compromised.
    Any easy solutions to resolve this problem?
    Thank you.
    Shinlee

    Any suggestions or comments about this topic?  I've been told by the UPS copy center that lightness/darkness modifications can be made from their printer; however my concern is that the print quality will be affected (i.e. lightening will cause a faded look).

  • Printing results are darker than screen. Any help!

    I used Aperture to print a book, the book turned up to be darker than it looks on the screen.
    I just printed few photos from LR3, the pictures ended up being darker as well. Am I missing something? I use sRGB IEC61966-2.1 profile. which I believe is standard.
    I have an iMac 24"/2008. What can I do to get an approximate colours? I have no budget for calibration equipment.
    I want to prepare an my wedding album soon. Any advice is appreciated.

    I agree with Kirby and Michael completely.
    I have made many books (with a couple of various 'self-publishing' provider such as Blurb, and Pro Photo lab such as Pikto in Toronto, Canada, and Apple). My workflow is used with Adobe Creative Suite CS5 (Design Premium CS5 and uses Design Premium versions over the years with Adobe), Apple Aperture and Adobe Ps Lightroom 3, and PhaseOne's Capture One PRO 5. My photography books included black and white, as well as color.
    Before I work with my photo files for book projects, I always calibrate monitors with X-Rite ColorMunki Photo. I recommend it highly. I calibrate my monitors EVERY week. In some instance, for extremely important project, I calibrate monitors for that project.
    I notice that Kirby (or Michael) or as in many other forum discussion here at Apple Aperture community forums, I don't see any mentions of 'proper' set up with monitor in a room. For example, it is best to *AVOID ANY* light reflection toward monitor by any means. This includes reflection from bright color shirts, room wall, windows and desk lamp. Remove ALL of light reflection distractions! In order to do a proper calibration set up, you need to make sure that there are absolutely NO distractions of light reflections toward monitor. You might want to use grey shirt or black turtleneck similar to that of Steve Job's trademark black turtleneck as an example. The point is to reduce all kind of reflection of lights toward monitor. With the right set up in the 'digital workflow lab' in your room, then proceed with calibration hardware such as ColorMunki Photo from X-Rite.
    Additionally, few months ago, I bought ColorChecker Passport, also a product of X-Rite. Very nice workflow, too.
    Anyway, once done with proper calibration set up (and regularly), you'll do well with your workflow for your book project. But be cautious and very conservative with yourself. Don't let your eyeballs fool you. Your eyeballs aren't always accurate due to many factors involved mentioned as above. That is where calibration hardware (and specialized software that comes with calibration device provided by vendors such as X-Rite and similar high-end professional-grade third-party vendors).
    Don't even think about adjusting brightness manually in monitor's physical setting, it actually ruin the entire workflow process. Don't do it! I had seen many, many, and many (if you will MANY times) discussion about it all over the Internet. This amaze me that there are millions, millions and millions of such similar problems as yours. If done manually and messing around with monitor's physical settings, this really screw this whole work up. This means bad output - simple as that. Unfortunately, some people didn't realize that. There is workaround solution to this, either use Aperture or Photoshop with level or curve adjustment.
    However, like I said, once with proper set up in room setting by removing ALL kinds of distraction of light reflections, and all other proper set up (such as neutral darken shirt, wall painted in grey (specialized painting stores offer this), so on, AND IF you believe you think you are seeing some issues with certain images, use it with caution approach in Photoshop with curve or level to brighten or darken.
    You want to learn a bit about soft-proofing. Aperture has this capacity to softproof your images whether your images look good for output such as book.
    Understand that you can't even get 100% of what you are seeing in monitor with output (books or fine art prints etc). With proper calibration set up, this will get you very close what you are seeing in monitor vs outputs. But with extreme cautious approach, this gets very close, but not 100 percent, though. But pretty close.
    You also want to learn more about ICC profile for preparing book files. I don't want to go on and bore you and afraid to confuse you even more. For example, if working with different printers such as Pro Photo lab or other self-publishing companies, or any other printers, DO consider to contact them about ICC profile where you can download these ICC profile. Please note that if they have different paper and types, consider downloading different profiles FOR these paper used in book. But don't worry too much about this, because Apple is pretty good with books and Aperture is pretty good. BUT you gotta to calibrate monitor in order to do a successful digital photo workflow.
    Well, you mentioned you don't want to invest in calibration hardware, perhaps that you want to hire a book designer to do a professional wedding book. But if you plan to make many books, DO consider to invest calibration device, this means this save you tons of time, money, effort and saving trees at the same time.
    All in all, it is really up to you.
    Hope some of tips, ideas and suggestion be of help and informative and educational perspective. Best of luck! Color Management topic itself is very complicated and very highly technical, it takes pro photographers, printers finally to understand what works, why and what's not. Perhaps that you want to look at X-Rite ColorMunki educational webinars about this - just to give you some ideas about why. Again, it is up to you. But the concept is the same with all other calibration device process. X-Rite has many pretty nice informative webinars. I wish that Apple offer this educational webinar about this too.
    Brian

  • I have two printers:  Epson XP-950 and an hp Photosmart 7520.  Both print photos that are darker than they appear on the PC screen.  What can I do to set them to printg what is shown on the screen????

    I use Photoshop Elements 12 for my photos.  I have a constant problem where my photos don't print like they appear on the screen.  They come out darker than the screen shows.  If brighten them in the program, I have to almost make the photo appear "white" in order to look good printed.   ??????  What can I do to fix this problem?? 

    sneakypete1 a écrit:
    I use Photoshop Elements 12 for my photos.  I have a constant problem where my photos don't print like they appear on the screen.  They come out darker than the screen shows.  If brighten them in the program, I have to almost make the photo appear "white" in order to look good printed.   ??????  What can I do to fix this problem??
    I am ready to bet that your display is much, much too bright (like all displays at factory settings.
    Why Are My Prints Too Dark

  • When printing books from iphoto the pictures are darker than on computer, Why, and what can be done?

    When having apple print books using iphoto dthe printed pictures are much darker than shows on computer.  Why, and what can be done to correct?

    What color profile are the photos - th best is sRGB or camera RGB - Adobe RGB is very often reported to print too dark
    LN

  • Some apps are dark and "waiting" - can anyone help?

    I just plugged my phone into my desktop and all of a sudden, a mess of apps showed up and they are dark. I selected them and they are now "waiting." Anyone know what's going on?

    Hi CDNStatenIsland,
    Thanks for using Apple Support Communities.  This discussion post has some good steps you can try if your apps appear to be stuck waiting to download:
    App updates won't download on my iPhone, they just say waiting.
    https://discussions.apple.com/thread/4111336
    Try tapping the App, so that it changes to Paused instead of Waiting, then tap it again to resume the install.
    Make sure you don't have any paused downloads in other apps either, like the App Store or iTunes Store.
    If that doesn't do it, try resetting or restoring the iPhone.
    Cheers,
    - Ari

  • SharePoint 2013 Error Exception from HRESULT: 0x80131904 Some sites are working while others give this error

    I can access some of the sites,  but others are throwing this error code... not sure why it appears that it is every other site almost...
    I can actually get this error, at a top level site, go to a sub-site and that site is displayed.
    Any ideas on how to resolve this error..
    the Central Admin site is down also, just a blank page is returned. no error message...
     we were able to add extra space on the VM brought back the sites but now the Central Admin site throws  a 404 not found...

    Hi ,
    According to your description, my understanding is that after adding extra space on the SQL server VM, the error 0x80131904 disappeared, but the CA got 404 error. Is it right?
    Afer adding extra space on SQL server, make sure the SQL server is online and run SharePoint 2013 Products Configuration Wizards, when running, select “don’t disconnect from the server farm”.
    Check whether this issue occurred on other machines. If CA is working from other computer and only server is facing this issue then you need to create diableloopbackcheck registry at HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa. The value should
    be 1 .
    Please go to IIS->the server->ISAPI and CGI Restrictions, check whether there are four 'Microsoft SharePoint Foundation 2010' entries. If not, you need to create the following entries with the name as 'Microsoft SharePoint Foundation 2010':
                     C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\isapi\_vti_aut\author.dll
                     C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\isapi\_vti_adm\admin.dll
                     C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\isapi\shtml.dll
                     C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\isapi\owssvr.dll
    Check Allow extension path of execute to allow the restriction to run automatically.
    If this issue still exists, please check the log file to find more information about this issue. The path of the log file is : C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
    Or you can use Event Viewer(Start->Run->event viewer) to find the log.
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • HT4976 why some messages are received and others are read ?

    I have an iPhone and I've been sending imessage to other people with iPhone.  Some messages are delivered and some are read.  What is the difference and why is this happening ?

    Depends on the receiver. They can set their read receipt to on and you will get read on your end when they actually open up the message app to read it. If they have read receipts set to off then all you will get is a delivered even if they read it.

  • Some songs are louder then others, can I balance the volume?

      Windows XP Pro  
    My nano plays songs at different volumes for some reason, I have to constantly adjust the volume level. is there a way for itunes, or ipod to level the volume?

    Hello rhufnagel,
    I am pleased that you have found the dicussion forums tailored specifically to your product.
    In regards to your inquiry about your iPod Nano playing songs at different volumes, yes it is possible to have your songs play at relatively close volumes. Here's how:
    1) Go to the Main screen on your iPod. To ensure you are at the correct screen, press the "Menu" button on the ClickWheel. If the screen menu's do not change, you are on the right screen.
    2)Select "Settings." Find the Sound Check option. Highlight it and press the Select button. Make sure that Sound Check it is enabled.
    This should solve your problem. If it doesn't, please don't hesitate to post again with further inquiries.
    Compaq Persario R3000z Series Notebook   Windows XP Pro  

Maybe you are looking for