Combination of prod orders

Hi gurus,
my client requirmrnt is as follows:
we are in steel industry and doing variant configuration.
according to caapcity ,we want to do combine of pos in sap ,is it possible.
if possible ,how .please explain me.

Dear,
Yes it is possible to create combination order in SAP.'
Please refer this blog for details,
/people/rupesh.brahmankar3/blog/2009/08/03/combining-production-and-process-orders-with-batch-production
Hope it will help you.
Regards,
R.Brahmankar

Similar Messages

Want to see combination of Purchase Order and A/P report at material level

Hello,
Anyone familiar with an InfoProvider that will show a combination of Purchase Order and A/P data combined?
I'm specifically looking for a source that includes the PO information at the Vendor / Material level with order value and quantity at the time the PO was created AND accounts payable data at the Vendor / Material level with the invoiced amount and quantity (which may vary for the PO amounts).
Thank you,
Jim

Hi
Have you seen all of the follwoing datasources......
http://help.sap.com/saphelp_nw04/helpdata/en/df/fbb0d62f3a794d98d23609d17e1610/frameset.htm
Hope this helps
Regards
N Ganesh

Link between Prod Order and Sale Order schedule line

Dear all,
Ours is a MTO (81).
In Scheduling Agreement / Sale Order , there are multiple schedule lines for a single item .
Production Orders are generated for every schedule line of the Item.
The client wants to know (for a custom developed report) , against which schedule line of the Sched Agreement/ Sale Order, the Production Order is generated ?
This Information can be seen in MD04.But I am not able to fetch from the tables .
The schedule line field (KDEIN ) is not updated in AFPO table & the order no (AUFNR) is not updated in VBEP table .
Say,
Sale Doc No : 42000506
Schedule line/Dely date            Order qty          Prod Order No
06.10.09                                    500kg               100170
15.10.09                                    300kg               100171
Pls give your valuable inputs.
Regards,
Sheik

Hi,
Only Sales Order No & Sales Order Item No is updated in the table.
Whereas , I want to know the Sales Order Schedule Line no.
Regards,
Sheiki

Combine multiple sales order in a single delivery

Hi Experts,
As per standard SAP we have a facility to combine multiple sales order in one delivery if orders have same shipping point,ship to party & delivery date.
But we have a requirement that the orders should get combine in a delivery only when shippping point,ship to party,delivery date & pricing date are same for orders.
Please let me know is there is any standard config available or do we need to write any exits & so...
Please reply ASAP .

Hi,
I think this is not there in standard functionality.
In this case you need to go for user exit for delivery routine 101, include program FV50B101
Check delivery routine 101 in VOFM and with the help of your abap consultant this can be done.
Thanks,
Swamy H P

Converting SNP Planned Order /Purch Req to Prod.Order/Purch.Order

Guys
What is the standard process to Convert the SNP Planned Order /Purch Req. into a Prod.Order/Purch.Order ?
Can the conversion indicator be set in APO for SNP Planned Order /Purch Req.and then transferred to R3 as Prod.Order/Purch.Order or can the convesrion of Planned Order /Purch Req to Prod.Order/Purch.Order can be done in R3 itself ?
I am not clear on how exactly this works. Would appreicate if you could provide me with the standard process and any config involved in the same such as Number Ranges and how to set the conversion indicator automatically through SNP planning runs ?
Thanks

When you set this indicator for a planned order or a purchase
requisition, the system automatically converts the order into a
Production order or purchase order after the transfer to the
connected SAP R/3 system.
The converted orders are then retransferred to the SAP APO system with a
different category; a purchase requisition with category BS-ANF becomes
a purchase order delivery schedule line with category BS-EIN.
Please check configuration setting in SPro for transfer setting to R/3.
1. Configure Transfer to OLTP Systems(SNP)
2.Maintain Global Parameters and Defaults(PPDS)
Also on R/3 side you can see it in MD04/MD07 collectively for a product . or individually on
MD13 : planned order
MB51n: PR
Manish

Material staging indicator not populating in prod order WM pick list item

Hello,
I have an issue with material staging in an prod order
1) PP-WM interface is activated
2) Control cycle for material is created
3) Production storage location is created for material
4) storage type is 100 for production
5) There is one discontinued material and also the follow up material
6) stock of discontinued material is zero and requirement are passed to follow up material
When we confirm the order the stagging indicator for both follow up material as well as discontinued material automatically populates zero (Non relevence to pick list items) where as it should be one (1 - for pick list items).
One more issue user has manually inserted discontinued material as well as follow up material in production order change mode.
In the BOM of a main material both discontinued as well as follow up material is there with some quantity as a component.
For the same work center, control cycle , production storage location the indicator is populating.
These two material (discontinued as well as follow up) are appearing twice in the WM pick list screen where first two line items are OK and populating indicator "1". But in line item last and second last indicator is not there.
My question is why the stagging indicator is not automatically populating in the production order WM pick list screen in front of components.

Unfortunately, WM material staging via production orders is not possible
from the pull list. Please see the long text of message RMPU 311
(WM material staging for production order reservation not possible):
"You cannot carry out a WM material provision for pick parts from
production order reservations in the pull list". The reasons for this
are cleary explained in the SAP on-line documentation via the
following path :
Logistics -> Logistics Execution -> Warehouse Management Guide ->
Goods Issue -> Goods Issue for Production Supply ->
Material Staging for Repetitive Manufacturing
See the following under the Selection heading :
The choice of the selection type influences which types of WM material
staging are supported in the pull list. However, the pick parts can be
staged via RS headers/planned orders but not with the current BOM
explosion. The release order parts, on the other hand, can also be
staged if the current BOM is used for calculating the dependent
requirements.
WM material staging via production orders is not possible from the pull
list.
I think you may try in CO02 or COR2 for production order or process order.

Block creation of multiple prod. order against single sales order in CO08

Hi All,
We have a requirement of blocking the creation of multiple production order against single sales order in CO08 if the production order is already created for that item.
How to achieve this?
SmanS

Hi,
you need to check if any user exit is there which will check order haeder table for the said sales order if any Prod Order exist for the same and flag custome error whicle prod order save.
Pls revert if you need any further information.

Settlement rule SDI in prod order

Hi,
I used strategy make to order in my client, when i create prod order the settlement rule is always MAT and want the settlement rule to be SDI to my sales order.
What should i config to achieve this ? since i tried to change order type dependent parameter and it did not allow (only PP1 and PP2 allowed).
Please kindly help
Best regards,
Freddy Ha

Hi,
i tried to change the requirement class for makte to order so the setlement become SD1 in setting for requirement type KE. In the OPJH i still used PP01. and now it work thanx for all off your input.
Thankx once again.
Good day,
Freddy Ha

Different batch no in prod order at the time of creation of prod order

Hi, we need different batch numbers in production order at the time of creation of production order. tried in system, i can able to create only one batch no at the time of creation of order. we need different batch no at the time of order creation and same no should be assigned at the time of GR from prod order. pls advise how to map this.

Dear,
Use the Exit EXIT_SAPLCOBT_001 under enhancement PPCO0001 where-in based on your requirement you can create batch for your order. You can use CALL FUNCTION 'VB_CREATE_BATCH' to create the batches as per your requirement.
Also make sure the automatic batch creation setting in Prodn Scheduling profile has been turned-off so that the batch is created only through the user-exit.
Refer this thread,
Re: Batch creation
Please try and revert back.
Regards,
R.Brahmankar

Require settlement rule when creating a Prod order

Hello,
Hello,
one of our processes is to fabricate complex tools that will be capitalized and depreciated when completed.
while the tools is being fabricated, we would like to settle regularly the production order to a capital order (AUC) and track the budget for the fabrication.
in this production process we want to require the user to enter a capital internal order in the settlement rule of the production order master data.. this way when Prod order is settled we dont have issues. can you make settlement rule entry as required during production order creation?
any input is appreaciated on the issue. Thanks
Andy

Hi,
There is no standart control for this, but I know a PP user exit which excatly meet you requirement.
PPCO0007---User Exit for Checking or Changing Header Fields During Order
You can first control if it is a production order ( ı think it is a special type to produce auc) that you want to control. Then you can select settlement rule and control and give error message settlement rule is mandotory you can not save. The exit sends a signal that it is not possible to save. For error message you can write code into the exit for the message.

Status of Prod Order not updated as delta - 2LIS_04_P_COMP

Hi all,
We are currently using 2LIS_04_P_COMP to update the data to BI. We have enhanced the DS to include the status of the prod order from table JEST. However it seems that this is not getting updated to BI server whenever prod order change its status. There is a delta queue when I see in tcode LBWQ and then I run the collective update in LBWE and then it will disappear from the queue which is correct. But when I see in RSA7, there is nothing and also I run the infopackage in BI server, it cannot get any data. Anybody has this issue before?
Many thanks in advance.
Regards,
Janet

The delta will only be captured if the Production Order actually changes. When a change is made to the status of an object in JEST, or JCDS, it doesn't register as a change on the object. Therefore, changes in Production Order status won't invoke a change on the source tables for Production Orders and therefore not get captured on the 2LIS_04_P_COMP or 0PRODORDER_ATTR DataSiources.
If you need to capture the changes in status for Production Orders, you will have to create a generic DataSource that is sourced by the JEST table and join it with the Production Order in BW.
Edited by: Dennis Scoville on Sep 17, 2009 8:16 PM

Qty withdrawn is not updating in prod order.

Hi gurus,
Qty wihdrawn is not updating in prod order , when i issuing
raw material through tcode mb1a 261 movement type.
What could be the possible reasons.Pls suggest.
Thanks in adv.
Sudarshan

Dear
you are issuing the materials in MB1a w/o reference to the reservaton.
You need to do as below
In MB1a ---follow the menu path -Goos issue -->create w.referenec to order.
Enter the order number. execute the report
system will default matrerial no and qty/storage loc from order. Here you enter the qty requuired and post. This qty you posted in this way will refect/update the withdrawl qty in the production order.
You are not entering the order the way I suggested, hence it is going as a unplanned issue...hence the problem.
come back if required

Combining 2 Sales Orders - 'Complete' with 'Partial' Delivery into 1 Delv

Hi folks,
I have a typical requirement from my client and it is as follows:
My client want to combine 'Sales Orders' marked with 'Complete Delivery' indicator(VBAK-AUTLF check-box is checked) at the Header -> Shipping, with Sales Orders marked for 'Partial Delivery' (VBAK-AUTLF is not checked) in the Header-> Shipping.
Although all the other business conditions/fields values at the Header levels,like Ship-To_party, Shipping Conditions, Incoterms, etc. are same across both these Sales Orders; SAP as a standard Business Process Flow, doesnot allow COMBINING of 2 such orders into a SINGLE Delivery, since their 'Headers' seem to differ for that ONE field value.
I have searched through all user-exits, SAP Help forums as well as OSS notes to get a solution to this problem but could not find any (bad luck).
Will anyone of you who has come across this particular scenario or know a way to get around this problem, be able to contribute with his/her ideas? I would be
grateful, thanks in advance.
Regards,
Shripad

Hi iim nava,
Thanks for your reply.
However in our case, the system does throw that error, when i try to combine the second order (partial) into the delivery created for the first order (complete).Here is the log for your reference, when I try to add the second(partial so items) into the delivery created for the first (complete delivery SO):
Diagnosis
 Item 000010 cannot be shipped in the same delivery with the
 other items in the document because the header data (AUTLF)
 is different. The field AUTLF for the item has the value &4,
 yet in the delivery it has X.
System Response
 The system issues this message if a delivery split is
 necessary.
 This message either appears in the collective processing log
 or during creation of outbound deliveries from projects or
 for subcontracting. It informs you that the item specified
 will be shipped in a delivery other than the delivery that
 includes the other items from the same document. If there was
 a general problem with shipment of the delivery, a different
 message appears.
 If this message appears when you are creating an outbound
 delivery with reference to a sales order in the foreground,
 it indicates that the order item cannot be shipped with the
 current outbound delivery.
By any chance, did you actually try simulating my scenario in your system. If you have and the same works fine in your system, then pls help me by sending your 'copy control' settings, to help me compare. We run SAP 4.6 and my settings for copy control are as follows:
LF <-> OR (Header):
 Data Transfer (VBAK) = 001 [HEADER]
 Data Transfer HU = 000 [blank]
 Order Requirements (VBAK) = 001 [HEADER]
 Combination Requirements = 651 [051 w/o Comp dlv]
LF <-> OR <-> TAN (Item):
 Item Data = 101 [ITEM]
 Order Requirements (VBAK) = 101 [ITEM]
 Business Data = 2 [BUSINESS DATA]
 Buss Data Reqmt = 151 [COMBINATION]
Hope the feedback can you will help me solve my problem. Thanks once again.
Regards,
Shripad

Form for Gr against Prod order.

Hi
I need a form for Gr against Prod order.. the form be trigerred once the Prod oder is saved...
Can you pl let me know the smartform for the same which can be used in this ...
Thanks in advance

This scenario is new
Normally during production order creation Order Printing can triggered automatically through spro setting
I don't think the GR related smartform
K.Prabakaran

Order Type: LA , when Planned Order --- Prod Order

In STD SAP, In MD04 when we convert planned order to prod order, a new screen comes
where we mention planned order ---> prod order,
In the above screen, ORDER TYPE :LA is mentioned (Bottom Right end corner)
As far to my understanding goes
In CO40, Order type PP01 which controls/holds
the production orders are being generated
(pickup from MRP parameters, under Planned order --> prod order (Tcode: OPPQ))
Then how does, ORDER TYPE: LA is being used & from where the system is pulling the order type LA
Please clarify

Hi Eswer,
Please check with SPRO t.code OMDD
Order profile is linked with Order type & Procurement type & SP type& Acct assisnment cat at OMDD.
When u run the MRP based on MRP view settings the Ordetype is selected For EX inhose porduction order type = LA.
When u create planned order manually, u have to select the Order profile manually.
Regards
Pradeep

Combination of prod orders

Similar Messages

Maybe you are looking for