Combination of SalesPro / MarketingPro / IC Agent possibilities

Working on an implementation for CRM7.0. Users will need to have access to specific pieces of the Marketing Professional, Sales Professional, and IC Agent roles.
Objective: Not require individuals to log in multiple times to complete their work. This would be cumbersome and impact individual's adoption of the application.
I have been informed that if individuals need functionality from all of these roles, they will have to log in multiple times. For example, they will have to create interactions under the IC Agent role, but if they want to see campaign details, they would have to log out and go in under the Marketing Professional role.
Is it possible to create a hybrid role that will allow for functionalty from all three of these roles to be combined into a single custom role?

You would have to look at SPRO CRM UI Framework Business roles.
The issue is each role has a type, a config key, a nav bar profile, layout profile, a technical profile, and a PFCG role (which could be custom). This is fairly complex to combine into one role. Most companies just change the default logon parameter within a SAP GUI session that way the end user gets a screen of which role they want to log in as.
It's just too many discrepancies between the roles so not possible.

Similar Messages

How to configure Oracle database in a failover zone cluster

Setup: Oracle database and zone configured on highly available local filesystems.
Two node cluster.
Oracle database running inside the zone.
Note: I dont have a zone cluster.
1. I need to make the zone and the oracle database highly available.
2. Can I configure the Oracle Data service directly to run in the zone or will it involve creating sczsh_config script to do the same.
I have been going through the guides and searching over the net, but haven't found any help so far. Its so much simpler to configure this environment in Veritas cluster. Hope I find some help here.
TIA,
Sudhir

The Oracle Solaris Cluster concepts guide has some information on which zone model to choose:
http://docs.oracle.com/cd/E18728_01/html/821-2682/gcbkf.html#scrolltoc
When managing a Solaris zone with the HA Zones agent, the cluster basically regards the non-global zone as a blackbox.
As such you can either start the Oracle database as part of the runlevel/SMF startup of the non-global zone, or you can use the sczsh or sczsmf component and use your own scripts to start, probe and stop the Oracle database.
Usage of the standard HA Oracle data service is not supported in combination with the HA Zones agent.
If you require a more fine grained control of services running in non-global zones, why not setup a zone cluster and then having HA Oracle failover the Oracle database between non-global zones?
Regards
Thorsten

How to configure standby database in a single machine

I am in Windows XP professional and oracle 9i . I want to configure a standby database for a database called proddb in the same machine. For doing this, I created a standby controlfile. But this work for the same name standby database?. How this happen ? two database with same name possible? How to create the second database (Standby) Please help?
Shiju

The Oracle Solaris Cluster concepts guide has some information on which zone model to choose:
http://docs.oracle.com/cd/E18728_01/html/821-2682/gcbkf.html#scrolltoc
When managing a Solaris zone with the HA Zones agent, the cluster basically regards the non-global zone as a blackbox.
As such you can either start the Oracle database as part of the runlevel/SMF startup of the non-global zone, or you can use the sczsh or sczsmf component and use your own scripts to start, probe and stop the Oracle database.
Usage of the standard HA Oracle data service is not supported in combination with the HA Zones agent.
If you require a more fine grained control of services running in non-global zones, why not setup a zone cluster and then having HA Oracle failover the Oracle database between non-global zones?
Regards
Thorsten

PR/PO doc type

Dear Friends
Can you all please adivce on how a PR document type is triggered by the system when we run an MRP when i multiple PR document types for the material and also how a PO document type is picked during the automatic creation of PO when i have multiple PO document types
Thanks In Advance

Hi
The document type for MRP purchase requisitions is derived from the config in
SPRO->IMG-> MM-> Consumption-Based Planning-> Planning-> Procurement proposals-> Define External Procurement
you can define the scheduling for each MRP group with a purchase info record, an outline agreement or the document type for the purchase requisition in MRP.
You can enter the document types of purchase requisitions in the appropriate fields. The system uses the appropriate document type when creating a purchase requisition in MRP or when converting planned orders into purchase requisitions. You can choose from the following document types:
Standard purchase order
Subcontracting
Stock transfer
The document type of the purchase requisition has no control purpose in MRP. It is displayed in the MRP list or the stock/requirements list for information purposes only.
Purchase requisitions for direct production are always created with the document type, standard purchase order (NB).
You assign the MRP group to the material in the material master record.
It is usually not necessary to enter document types. If no document type has been entered, the system uses document type NB to create purchase requisitions.
Regarding the auto conversion of PR to PO. This is the logic used .
to convert a group of purchase requisitions into a purchase order. The document type of the purchase order is derived from the document type of the first purchase requisition of this group according to the following algorithm:
If an order document type exists which is identical to the purchase requisition document type and is allowed according to Customizing (table T161A or Customizing Transaction OMEC) this one has the highest priority. If there is only one allowed document type, the system generates this one. For several allowed document types, the one which is entered as a default document type for Transaction ME21 is prior to the others (table T160 or Customizing Transaction OMH5). If nothing is entered here or the default document type is not allowed, the system takes the first allowed document type.
Special cases are stock transport orders and the purchse order split for each item category:
For stock transport orders the document type is derived from the combination issuing plant/receiving plant (table T161W or Customizing Transaction OMGN).
If the purchase order split is active for each item category, the item category is also used during the document type determination:
If there is one order document type which is identical with the purchase requisition document type and the same item category is allowed as the one in the purchase requisition (according to table T161A), the system uses this combination. If there are several possibilities, the system takes the first document type for which the same item category is allowed as for the purchase requisition. If this does not succeed (as in the general case), the same document type (if available) is chosen (but with a different item category) or the default document type for Transaction ME21 or the first allowed one.
There is no possibility to define a special document type (via the proposal mechanism of table T160) for the automatic generation of purchase orders.
Thanks & Regards
Kishore

Envy dv7-7212nr and Windows 7 64Bit

Just finished downgrading Envy dv7-7212nr from Windows 8 to Windows 7 Ultimate 64Bit. Below is the list of drivers and software paks needed to get everything working.
Hope this helps any of you having issues with wireless or fingerprint drivers. All function buttons and on/off buttons working as they should. You may need additional software if you changed your boot drive to SSD or if you change the wirless card as I did. Currently running an Intel SSD and Intel 7260 dual band wireless card.
Caveat: I have tried every combination of BIOS setting and boot possibilities to try to get Win7 to install in UEFI mode with no luck. Tried Microsofts boot procedure, rufus installer, installing from DVD, installing from USB. No luck. It gets through the boot and at the Windows opening screen with the floating squares merging together, it hangs. That's as far as it gets. Only success has been installing in Legacy mode. If anyone has a solution to this... I would be happy to listen.
Like I said... running fine in Legacy mode.
All of these upgrades were run AFTER all updates from Microsoft Windows Update were installed. You can then look for updates from this point on after doing the below installs.
All done with a clean install on a bare SSD using the Win7 iso files available from Microsoft web site.
Anyway... the drivers and sofpac installers below all work:
Intel Driver Update Utility Installer - avail at Intel site
Intel USB 3.0 eXtensible Host Controller 1.0.101.255- avail at Intel site
sp64959 - Intel chipset driver
sp59653 - Realtek PCIE Controller
sp62291 - HP Support Assistant
sp63599 - UEFI Support Environment Diagnostics
sp64144 - 3D Drive guard
sp64205 - Intel My WiFi
sp64740 - Cyberlink Power 2 Go Software
sp64854 - Cyberlink Media Suite Software
sp64958 - IDT Audio Driver
sp64961 - Intel Management Engine Interface
sp64963 - Intel Rapid Storage Technology Driver
sp64966 - nVidia High Definition Video driver
sp64969 - Realtek Card Reader
sp64968 - Realtek Local Area Network Driver
sp65424 - HP Cool Sense
sp65790 - Cyberlink LabelPrint Software
sp65795 - Cyberlink YouCam Software
sp65796 - Cyberlink PowerDVD Software
sp66111 - Synaptics Touchpad
sp67075 - Validity FingerPrint Driver
sp61399 - SimplePass Fingerprint Security Software
Hope this is a help to some of you. Machine runs great in Legacy mode with Win7 and these installs.
Again... if anyone has success in installing and setting up in UEFI mode - I sure would appreciate some detailed step by step instructions.
Thanks again!

'sHi,
Are you using this driver? Are you getting no sound from your microphone or is nothing being recorded?
Please go to Control Panel, Sound make sure that the Microphone option is set as default and that the mic levels are adjusted accordingly, not mute.
If this is not working for you, Customer Support can be contacted using this http://support.creative.com/Downloads/searchdownloads.aspx?filename=

Difference between SAP CRM Security and SAP ECC 6.0 security

Hi
I have extensively worked on SAP ECC security but haven't have chance to work on CRM Security.
Can anyone please let me know the difference between CRM security compared to ECC security.
Thanks...

I am sorry to say, but instead of giving the guy a decent answer you are starting a fight or discussion about stupid forum points...
really sad.....
The big difference between SAP ECC and SAP CRM Security (up to release 5.0) was the following:
1) For sure there are very different transaction codes in SAP CRM as compared to SAP ECC in the first place
2) If you are familiar with R/3 or ECC authorizations; then you know that already on transaction code level, the 'allowed activity' is controlled on tcode level , whereas in SAP CRM , in most cases the 'allowed activity is not controlled by the Transaction code, but on authorization object level....
E.g. transaction code BP allows you to create/change/display any type of Business Partner (e.g; sold-to/ship-to/contact person/employee/customer) which is based on the business partner ROLE concept.... anyway...you can control the allowed activity based on different authorization objects.....
another example is business transaction processing...which can be launched by:
a very generic transaction code: CRMD_ORDER
transaction category related transaction codes :e.g.
> CRMD_BUS2000126 for activity management
> CRMD_BUS200115 for Sales processes
Again...allowed activity is not controlled by the tcode, but on authorization object level...
3) As of the new WEBCLIENT UI (which is valid as of release CRM2006s/CRM2007/CRM7.0) SAP also invented an extra authorization layer, which is UI COMPONENT LEVEL and logical links.... controlled by object UIU_COMP.
However, they also introduced the BUSINESS ROLE Concept (e.g; SALESPRO/MARKETINGPRO/...) which defines actually the functionalities, navigation bar, screen configuration, logical links you can use/see within the new WEBclient UI.
Another thing is that instead of using TRANSACTION CODES, as of these new releases, you are actually using 'external services'....so you do not authorize on tcodes basically....but the logic between tcodes and external services in relation to the authorization objects that are checked is more or less the same....
STANDARD authorization setup in the new WEBUI client is therefore controlled by both backend authorizations (not UIU component related) and the UIU_COMP (restricting access to workcenters/logical links/...)
4) Additionally SAP also provides a concept called ACE (which stand for ACCES CONTROL ENGINE)....
This requires a bit of customizing...and the rest is more or less pure customer development, as you will create your own methods where you'll define a logic which dynamically will verify what kind of access you have for an object....
You should now that ACE is actually implemented on top of your 'normal' sap crm security setup....
cheers
Davy Pelssers

Shipment Cost Calculation

Dear All,
I know that tariffzone plays a role in determining the price for the freight/Service Agent condition in case of outbound shipment cost calculation
I have the following query in Shipment Pricing.
Can anyone please explain whats the role of the 2 postal code columns in the tariff zone assignment?
Also how & where I have to maintain the data for determining the tariff zone which I have assigned to the above combination.
Please help.
Regards,

HI Dave,
Thanks for the response.
Please note that I have maintained postal codes in my Shipping point also in my customer master.
For the combination of TP Point, Service agent, Shipping type & Country I have made the following assignment.
I have given my shipping point Postal code in both the Postal code columns of Tarff zone assignment (say Tariff) & my customer master Postal code in both the Postal code columns of Tariff zone assignment (say Tariff1).
Now I have maintained the condition records in TK11 for the combination of Depart. Tariff zone/Destn.Tariff zone/Service Agent i.e. Tariff/Tariff1/Service Agent
But my condition record value is not getting determined & when I simulate my shipment cost I am getting the following error message.
Shipment costs not yet calculated
Shipment costs item 000001 w/ ref. to doc. $0001 item 0001
Message no. VY104
Goods types directory could not be determined
Message no. VW803
Please help to reolve this issue.
Regards,

CIC WIn Client

Hi CRM Gurus
I have 10 different telephony queues and I need to assign different combination of queues to different agents...
How do I acheive this task ? Can somebody please help me with this process.
Regards
Jessy

Hi Jessy
You will have to create your CTI Profile using the following path
IMG>CRM>IC Winclient> Hidden Components> Configuration of CTI Component-->Define CTI Component Profile
Now in this profile you can select whether the queue selection is automatic or manually by checking the check box marked Queue selection screen.
Next assign your telephone queues to the CTI Profile in the next node
IMG>CRM>IC Winclient> Hidden Components> Configuration of CTI Component-->Assign Telephone Queues to CTI Profiles
Also maintian the telephony settings in SAP Easy Access using the path
SAP Easy Menu> IC> IC Winclient--> Administration --> Telephony
Hope this will help
Regards,
Rekha Dadwal
<b>You gain a point for every point that you reward. So reward helpful answers generously</b>

Determination of Tariff Zones in Shipping

Dear All,
Can anyone explain how tariff zones are determined & whats its role in Shipment cost pricing?
Regards,

Hi LakshmiPathi,
Thanks for the response.
Please note that I have maintained postal codes in my Shipping point also in my customer master.
For the combination of TP Point, Service agent, Shipping type & Country I have made the following assignment.
I have given my shipping point Postal code in both the Postal code columns of Tarff zone assignment (say Tariff) & my customer master Postal code in both the Postal code columns of Tariff zone assignment (say Tariff1).
Now I have maintained the condition records in TK11 for the combination of Depart. Tariff zone/Destn.Tariff zone/Service Agent i.e. Tariff/Tariff1/Service Agent
But my condition record value is not getting determined & when I simulate my shipment cost I am getting the following error message.
Shipment costs not yet calculated
Shipment costs item 000001 w/ ref. to doc. $0001 item 0001
Message no. VY104
Goods types directory could not be determined
Message no. VW803
Please help to reolve this issue.
Regards,

McAfee - combining both VSE and Agent?

Hi everyone,
We are planning to deploy McAfee (agent 4.6& vse 8.7) to some of user machines by using sccm2012. In our case, we don't want to use ePO or updater to push
the vse automatically.
Is there any ways to combining both VSE and Agent into one package? Or any scripts that can perform installing vse after agent install completed?
Appreciated if someone here can help on this.
Thank you.
Best.

Use task sequence.
Refer to the below for the procedure
http://griffo.hubpages.com/hub/Deploy-Packages-in-an-Order-Using-SCCM-2012
Blog: http://theinfraguys.com
Follow me at Facebook
The Infra Guys Facebook Page
Join the Singapore System Center Admin Group
SG System Center Admin Group
Please remember to click Mark as Answer on the answer if it helps you in anyway

Anybody know the Roadmap for combining NAC Agent and Cisco AnyConnect?

Heard a rumor that Cisco is going to combine the functionality of the NAC Agent and Cisco AnyConnect as far as being an 802.1x supplicant, does anyone have any information about this? Like is it true and if so, any idea when it will happen?

Hi ,
There is no comitted plan for NAC and Anyconnect integration. But Anyconnect now comes with a module called NAM ( network access module) which can do dot1x as well.
Here is the link for that :
http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect30/administration/guide/ac04namconfig.html
Thanks
Waris

Mod_jk in combination with mod_rewrite

My question is wtf doesn't this work?
I'm using apache 1.3.27 and jboss-3.0.4_tomcat-4.1.12
mod_jk works fine. I tried adding in mod_rewrite and now when I go to a page that gets rewritten, the mod_jk doesn't SEE the new URI. Instead, it still uses the old URI. IS THIS PROBLEM NOT FIXED IN TOMCAT-4.1.12?? That's the only explanation I can think of. I have tried putting mod_jk before mod_rewrite and vice-versa. Here's another question...... when people say to put mod_jk before mod_rewrite in the httpd.conf file, do they mean put the entire set of directives before, or just the LoadModule statement? I've tried several ways.
Anyway, here is my httpd.conf file. Any suggestions to get this far-more-painful-than-it-needs-to-be process working? Is it a Servlet 2.2 requirement that these configs be hard to use?
ServerTokens Prod
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# After this file is processed, the server will look for and process
# /etc/httpd/conf/srm.conf and then /etc/httpd/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by the
# server as "/usr/local/apache/logs/foo.log".
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerType is either inetd, or standalone. Inetd mode is only supported on
# Unix platforms.
ServerType standalone
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "/etc/httpd"
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename.
LockFile /var/run/httpd.lock
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile /var/run/httpd.pid
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file will be created when you run Apache) then you must ensure that
# no two invocations of Apache share the same scoreboard file.
ScoreBoardFile logs/apache_runtime_status
# In the standard configuration, the server will process httpd.conf (this
# file, specified by the -f command line option), srm.conf, and access.conf
# in that order. The latter two files are now distributed empty, as it is
# recommended that all directives be kept in a single file for simplicity.
# The commented-out values below are the built-in defaults. You can have the
# server ignore these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
MinSpareServers 8
MaxSpareServers 32
# Number of servers to start initially --- should be a reasonable ballpark
# figure.
StartServers 16
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
MaxClients 256
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.
# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
MaxRequestsPerChild 1000
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#Listen 3000
#Listen 12.34.56.78:80
#Listen 80
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#BindAddress *
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Please read the file http://httpd.apache.org/docs/dso.html for more
# details about the DSO mechanism and run `httpd -l' for the list of already
# built-in (statically linked and thus always available) modules in your httpd
# binary.
# Note: The order in which modules are loaded is important. Don't change
# the order below without expert advice.
# Example:
# LoadModule foo_module modules/mod_foo.so
#LoadModule mmap_static_module modules/mod_mmap_static.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
<IfDefine HAVE_BANDWIDTH>
LoadModule bandwidth_module modules/mod_bandwidth.so
</IfDefine>
<IfDefine HAVE_THROTTLE>
LoadModule throttle_module modules/mod_throttle.so
</IfDefine>
#LoadModule env_module modules/mod_env.so
LoadModule config_log_module modules/mod_log_config.so
#LoadModule agent_log_module modules/mod_log_agent.so
#LoadModule referer_log_module modules/mod_log_referer.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule mime_module modules/mod_mime.so
#LoadModule negotiation_module modules/mod_negotiation.so
LoadModule status_module modules/mod_status.so
LoadModule info_module modules/mod_info.so
#LoadModule includes_module modules/mod_include.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule dir_module modules/mod_dir.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule imap_module modules/mod_imap.so
#LoadModule action_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
# Thu 05 Jun 2003 10:12:02 AM PDT <[email protected]>
LoadModule jk_module /usr/local/lib/apache/mod_jk.so.ap1.3.27-eapi.rh72
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule access_module modules/mod_access.so
LoadModule auth_module modules/mod_auth.so
LoadModule anon_auth_module modules/mod_auth_anon.so
LoadModule db_auth_module modules/mod_auth_db.so
#LoadModule auth_any_module modules/mod_auth_any.so
#LoadModule dbm_auth_module modules/mod_auth_dbm.so
#LoadModule auth_ldap_module modules/mod_auth_ldap.so
#LoadModule mysql_auth_module modules/mod_auth_mysql.so
#LoadModule auth_pgsql_module modules/mod_auth_pgsql.so
#LoadModule digest_module modules/mod_digest.so
#LoadModule proxy_module modules/libproxy.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule example_module modules/mod_example.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
<IfDefine HAVE_PERL>
LoadModule perl_module modules/libperl.so
</IfDefine>
<IfDefine HAVE_PHP>
LoadModule php_module modules/mod_php.so
</IfDefine>
<IfDefine HAVE_PHP3>
LoadModule php3_module modules/libphp3.so
</IfDefine>
<IfDefine HAVE_PHP4>
LoadModule php4_module modules/libphp4.so
</IfDefine>
<IfDefine HAVE_DAV>
LoadModule dav_module modules/libdav.so
</IfDefine>
<IfDefine HAVE_ROAMING>
LoadModule roaming_module modules/mod_roaming.so
</IfDefine>
<IfDefine HAVE_SSL>
LoadModule ssl_module modules/libssl.so
</IfDefine>
<IfDefine HAVE_PUT>
LoadModule put_module modules/mod_put.so
</IfDefine>
<IfDefine HAVE_PYTHON>
LoadModule python_module modules/mod_python.so
</IfDefine>
# Thu 05 Jun 2003 10:12:02 AM PDT <[email protected]>
#Include /etc/httpd/conf/mod_jk.conf
<IfModule mod_jk.c>
JkWorkersFile /usr/local/jboss/server/default/conf/workers.properties
JkLogFile /var/tmp/jk.log
JkLogLevel warn
JkOptions ForwardKeySize ForwardURICompat -ForwardDirectories
JkMount /*.jsp ajp13
JkMount /servlet/* ajp13
JkMount /xml/servlet/* ajp13
</IfModule>
<IfModule mod_rewrite.c>
f
RewriteEngine on
RewriteLog /etc/httpd/logs/rewrite.log
RewriteLogLevel 1
RewriteRule ^/rwtest/(.*)$ /index.jsp [L]
</IfModule>
# Reconstruction of the complete module list from all available modules
# (static and shared ones) to achieve correct module execution order.
# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
ClearModuleList
#AddModule mod_mmap_static.c
#AddModule mod_vhost_alias.c
<IfDefine HAVE_BANDWIDTH>
AddModule mod_bandwidth.c
</IfDefine>
<IfDefine HAVE_THROTTLE>
AddModule mod_throttle.c
</IfDefine>
#AddModule mod_env.c
AddModule mod_log_config.c
#AddModule mod_log_agent.c
#AddModule mod_log_referer.c
#AddModule mod_mime_magic.c
AddModule mod_mime.c
#AddModule mod_negotiation.c
AddModule mod_status.c
AddModule mod_info.c
#AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
#AddModule mod_cgi.c
#AddModule mod_asis.c
#AddModule mod_imap.c
#AddModule mod_actions.c
#AddModule mod_speling.c
#AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_jk.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_auth_anon.c
AddModule mod_auth_db.c
#AddModule mod_auth_any.c
#AddModule mod_auth_dbm.c
#AddModule auth_ldap.c
#AddModule mod_auth_mysql.c
#AddModule mod_auth_pgsql.c
#AddModule mod_digest.c
#AddModule mod_proxy.c
#AddModule mod_cern_meta.c
AddModule mod_expires.c
AddModule mod_headers.c
#AddModule mod_usertrack.c
#AddModule mod_example.c
#AddModule mod_unique_id.c
AddModule mod_so.c
AddModule mod_setenvif.c
<IfDefine HAVE_PERL>
AddModule mod_perl.c
</IfDefine>
<IfDefine HAVE_PHP>
AddModule mod_php.c
</IfDefine>
<IfDefine HAVE_PHP3>
AddModule mod_php3.c
</IfDefine>
<IfDefine HAVE_PHP4>
AddModule mod_php4.c
</IfDefine>
<IfDefine HAVE_DAV>
AddModule mod_dav.c
</IfDefine>
<IfDefine HAVE_ROAMING>
AddModule mod_roaming.c
</IfDefine>
<IfDefine HAVE_SSL>
AddModule mod_ssl.c
</IfDefine>
<IfDefine HAVE_PUT>
AddModule mod_put.c
</IfDefine>
<IfDefine HAVE_PYTHON>
AddModule mod_python.c
</IfDefine>
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# If your ServerType directive (set earlier in the 'Global Environment'
# section) is set to "inetd", the next few directives don't have any
# effect since their settings are defined by the inetd configuration.
# Skip ahead to the ServerAdmin directive.
# Port: The port to which the standalone server listens. For
# ports < 1023, you will need httpd to be run as root initially.
Port 80
## SSL Support
## When we also provide SSL we have to listen to the
## standard HTTP port (see above) and to the HTTPS port
<IfDefine HAVE_SSL>
Listen 80
Listen 443
</IfDefine>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group "#-1" on these systems!
User apache
Group apache
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
ServerAdmin [email protected]
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
# machine always knows itself by this address. If you use Apache strictly for
# local testing and development, you may use 127.0.0.1 as the server name.
#ServerName localhost
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/usr/local/ourcompany/deploy/webroot"
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/usr/local/ourcompany/deploy/webroot">
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
Options Indexes FollowSymLinks
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
# The path to the end user account 'public_html' directory must be
# accessible to the webserver userid. This usually means that ~userid
# must have permissions of 711, ~userid/public_html must have permissions
# of 755, and documents contained therein must be world-readable.
# Otherwise, the client will only receive a "403 Forbidden" message.
# See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden
#<IfModule mod_userdir.c>
# UserDir public_html
#</IfModule>
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
<IfModule mod_dir.c>
DirectoryIndex index.jsp index.html index.htm index.shtml index.php index.php4 index.php3 index.phtml index.cgi
</IfModule>
# AccessFileName: The name of the file to look for in each directory
# for access control information.
AccessFileName .htaccess
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
<Files ~ "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</Files>
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#CacheNegotiatedDocs
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
UseCanonicalName On
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
<IfModule mod_mime.c>
TypesConfig /etc/mime.types
</IfModule>
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
<IfModule mod_mime_magic.c>
# MIMEMagicFile /usr/share/magic.mime
MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error_log
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
# CustomLog /var/log/httpd/access_log common
#CustomLog logs/access_log combined
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access_log combined
CustomLog "|/usr/sbin/cronolog -H /var/log/httpd/access /var/log/httpd/%Y/%m/access.%Y-%m-%d" combined
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature EMail
# EBCDIC configuration:
# (only for mainframes using the EBCDIC codeset, currently one of:
# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
# The following default configuration assumes that "text files"
# are stored in EBCDIC (so that you can operate on them using the
# normal POSIX tools like grep and sort) while "binary files" are
# stored with identical octets as on an ASCII machine.
# The directives are evaluated in configuration file order, with
# the EBCDICConvert directives applied before EBCDICConvertByType.
# If you want to have ASCII HTML documents and EBCDIC HTML documents
# at the same time, you can use the file extension to force
# conversion off for the ASCII documents:
# > AddType text/html .ahtml
# > EBCDICConvert Off=InOut .ahtml
# EBCDICConvertByType On=InOut text/* message/* multipart/*
# EBCDICConvertByType On=In application/x-www-form-urlencoded
# EBCDICConvertByType On=InOut application/postscript model/vrml
# EBCDICConvertByType Off=InOut */*
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
<IfModule mod_alias.c>
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
Alias /clipart/ "/usr/local/ourcompany/data/clipart/"
<Directory "/usr/local/ourcompany/data/clipart">
Options MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
Alias /image_upload/ "/usr/local/ourcompany/data/labels/"
<Directory "/usr/local/ourcompany/data/labels">
Options MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# This Alias will project the on-line documentation tree under /manual/
# even if you change the DocumentRoot. Comment it if you don't want to
# provide access to the on-line documentation.
# Alias /manual/ "/etc/httpd/htdocs/manual/"
# <Directory "/etc/httpd/htdocs/manual">
# Options Indexes FollowSymlinks MultiViews
# AllowOverride None
# Order allow,deny
# Allow from all
# </Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/var/www/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
# End of aliases.
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
# Directives controlling the display of server-generated directory listings.
<IfModule mod_autoindex.c>
# FancyIndexing is whether you want fancy directory indexing or standard
IndexOptions FancyIndexing NameWidth=*
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/

Please note: I AM USING:
JkOptions ForwardKeySize ForwardURICompat -ForwardDirectories
And that's what's supposed to fix this problem in the first place, right??

Messages Agent wants to use my confidential information??

Good afternoon,
Every time I restart my computer a window opens up saying:
Messages Agent wants to use your confidential information stored in "FaceTime: email address.com" in your keychain.
do you want to allow access to this item?
Always Allow    Deny       Allow
This has been happening since i've updated to OS X Yosemite 10.10
What is this and should I Allow it?
Thanks

Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
          Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
          Keychain Access ▹ Preferences... ▹ First Aid
There are four checkboxes in the window that opens. Check all of them. if they're not already checked. Close the window.
Select
          Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.
If you use iCloud Keychain, open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device.

Issue with custom search fields in agent inbox

Hi All,
I am working on CRM agent inbox 7.0. The issue I am facing is like this:
I have added custom search fields in inbox. When give a combination of standard search field and custom search field, the result is only based on standard field. The value of custom field is not considered.
Is this a standard behaviour? Are standard fields given higher priority that custom fields?
Any pointers on this would be highly helpful.
Thanks,
Narendra

Hi Naren,
Did you add custom field using AET? If yes then while adding custom field using AET did you make it search and result relevant?
There is nothing like priority in standard SAP fields and custom fields.
Please let me know so that I can further help you.
Thanks,
Bhushan

Organization Tab in Service Order in IC Agent Role

Hi Experts ,
During the creation of a Service Order.,Complaints and Returns from the front end I C Service Agent role , I am unable to maintain any Organization Data .
I am unable to find the Organization Data tab to enter a Service Organization (just like the way in the SAP GUI ). in the IC AGENT role.
I have checked all the components and views for available fields /tabs but there is nothing available for Organization Data.
Could you please help me , so as to display the organization tab in the Service Order/Complaints in the front end IC Agent Role.
We have the Organization Tab available in the Personalization Options itself in the SERVICEPRO Role .
Is the SERVICEPRO role better suited for creating Complaints , Returns transaction ?
However I do need the IC AGENT Role for Account Identification and Confirmations which can only be executed through the framework of the IC AGENT Role .
Please advice.
Your help will be appreciated.
Thanks,
Maroof

Hello,
Use customizing path:
- Plant Maintenance and Customer Service
- Maintenance and Service Processing
- Maintenance and Service Orders
- Functions and Settings for Order Types
Two sub-options are then relevant:
Create Default Value Profiles for General Order Data
Update an existing profile or create a new one to include your Field Key
Default Values for Task List Data and Profile Assignments
A maintenance profile is assigned to a plant/order type combination
The data in user fields is at operation level.
-Paul

Combination of SalesPro / MarketingPro / IC Agent possibilities

Similar Messages

Maybe you are looking for