Combine '08 library with '09 library

I have just installed '09 iPhoto and have several files on my back up hard drive and would like to have them all together in the new program.
I have iPhoto Library 2, Iphoto Library etc. It sometimes asks me if I want to restart with another library, but I really just want them to all be available all the time without restarting.
What is the best way to get them all together like they were before the new install?
Thanks,
N

1 - they must all be the same version - so open each one with iPhoto '09 to convert them to the '09 format (open a copy if you want to ever be able to open the library with the old versino - this is a one way conversion - and having a backup up is a great idea because things can fail)
2 - use iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - to merge them
LN

Similar Messages

  • How do i combine two folders with some of the same music?

    How do I combine two music folders (one is on my pc, the other is on my external HD). The external HD is for back up, but I have since added 7gb of music on my PC. I want to add the 7gb to my external HD, but not sure exactly what songs/artist I need to move. Short of going folder by folder to copy and drag, is there an easier way to combine the folders with out doubling up what is in both spots?

    IF you are going from PC to external then drag the whole library to the external drive and andwer no when asked if you want to copy over existing files. That's how I do it. No duplication and only the new songs actually copy.

  • Can I combine codec m2v1 with apple ProRes 422 (HQ) in same FCP X project?

    Can I combine codec m2v1 with apple ProRes 422 (HQ) in same FCP X project? 
    Everything else is same.  29.97, fps, 1920 x1080, Linear PCM, 48kHz, mono, .mov
    If not, could I add the logo animation after outputting to compressor using QuickTime 7?
    I'm re-wrapping footage from Canon XF100, which is why m2v1.  I like working this way to preserve original footage.
    I just had my logo animated and designer matched everything except the m2v1.  Providing ProRes 422 (HQ)
    Thank you for your thoughts.  I'd like to avoid changing my camera footage to Apple ProRes 422 (HQ).

    Hi Mary,
    I'm new to FCPX too!
    When creating a new project, if you click on Use Custom Settingsand then ckick on the Custom checkbox in Video Properties, you can specifyexactly what you want!
    If you need to change it after the project was craeted, I found that you can click and highlight on the project in the Project Library window, then go over to the "info" button . The Properties window will expand from the right side (above the "info" button . With Properties selected it will show you the present settings, if you need to change those settings, click on the icon of the WRENCH on the bottom of that dialog box (Properties). You can then change your settings.
    Good luck, and happy cutting!
    Jb (James)

  • Combine LR Pages with other templates, How?

    Just bought LR pages from The Turning Gate. There is some info on their
    website about combining LR pages with other templates. But I already
    get stuck reading this information. Is there someone who would explain
    this to me? I know a lot about photoshop, but this is something different.
    Best regards,  Marion

    Hi Sean,
    Thank you for the advice
    best regards, Marion
    Op 17 jun 2009, om 13:24 heeft Seán McCormack het volgende geschreven:
    You really need to deal with Matthew on this Marion.
    >
    Here's the relevant support link:
    >
    http://www.lightroomforums.net/showthread.php?t=1527
    >

  • Combining relation facts with dimensions from an Essbase cube

    Hi!
    I am having trouble combining relational measures (from EBS) with dimensions from an Essbase cube. The dimensions that we want to use for reporting (drilling etc) are in an Essbase cube and the facts are in EBS.
    I have managed to import both the EBS tables and the cube into OBIEE (11.1.15) and I have created a business model on the cube. For the cube I converted the accounts dimension to a value based dimension, other than that it was basically just drag and drop.
    In this business model I created a new logical table with an LTS consisting of three tables from the relational database.
    The relational data has an account key that conforms to the member key of the accounts dimension in the Essbase cube. So in the accounts dimension (in the BMM layer) I mapped the relational column to correct column (that is already mapped to the cube) - this column now has two sources; the relational table and the cube. This account key is also available in the LTS of my fact table.
    The content levels for the LTS in the fact table have all been set to detail level for the accounts dimension.
    So far I am able to report on the data from the fact table (only relational data) and I can combine this report with account key from the account dimension (because this column is mapped to the relational source as well as the cube). But if expand the report with a column (from the accounts dimension) that is mapped only to the cube (the alias column that contains the description of the accounts key), I get an error (NQSError 14025 - see below).
    Seeing as how I have modeled that the facts are connected to the dimension through the common accounts key, I cannot understand why OBIEE doesn't seem to understand which other columns - from the same dimension - to fetch.
    If this had been in a relational database I could have done this very easily with SQL; something along the lines of select * from relational_fact, dim_accounts where relational_fact.account_key=dim_accounts.account_key.
    Error message:
    [nQSError: 14025] No fact table exists at the requested level of detail
    Edit:
    Regards
    Mogens
    Edited by: user13050224 on Jun 19, 2012 6:40 AM

    Avneet gave you the beginnings of one way, but left out that a couple of things. First, you would want to do the export of level zero only. Second, the export needs to be in column format and third, you need to make sure the load rule you use is set to be additive otherwise the last row will overwrite the previouse values.
    A couple of other wats I can think of doing this
    Create a replicated partition that maps the 3 non used dimensiosn to null (Pick the member at the top of the dimension in your mapping area)
    Create a report script to extract the data putting the three dimensions in the page so they don't show up.
    Use the custom defined function jexport in a calc script to get what you want

  • Is there a way to combine a variable with a string?

    Hi,
    Im trying to combine a string with varible so that on function can control a variaty of elements, depending on which varible is chosen.
    Here is my code:
    public function currentFrame_Fun():void
    //trace("3level1Btn_Array" + level1Btn_Array);
    //if (dot_BG.Dot_Screen.currentFrame == 2)
    level1Btn_Array.push("screenPath.L1P" + (dot_BG.Dot_Screen.currentFrame -1) + "Dot1");
    level1Btn_Array.push("screenPath.L1P" + (dot_BG.Dot_Screen.currentFrame -1) + "Dot2");
    level1Btn_Array.push("screenPath.L1P" + (dot_BG.Dot_Screen.currentFrame -1) + "Dot3");
    level1Btn_Array.push("screenPath.L1P" + (dot_BG.Dot_Screen.currentFrame -1) + "Dot4");
    level1Btn_Array.push("screenPath.L1P" + (dot_BG.Dot_Screen.currentFrame -1) + "Dot5");
    trace ("after push array is " + level1Btn_Array)
    /*level1Btn_Array.push("screenPath.L1P" + (currentFrame -1) + "Dot2");
    level1Btn_Array.push("screenPath.L1P" + (currentFrame -1) + "Dot3");
    level1Btn_Array.push("screenPath.L1P" + (currentFrame -1) + "Dot4");
    level1Btn_Array.push("screenPath.L1P" + (currentFrame -1) + "Dot5");*/
    //for (var j:int=1; j < 5; j++){
    /*level1Btn_Array.push("screenPath.L1P" + (dot_BG.Dot_Screen.currentFrame) + "Dot" + j);
    trace("3level1Btn_Array" + level1Btn_Array);*/
    NumberDots();
    public function NumberDots():void
    //trace("level1Btn_Array" + level1Btn_Array);
    for (var i:int=0; i < level1Btn_Array.length; i++)
    var frame:Number = b++;
    trace("frame="+frame)
    trace("array buttoon 3 is" + level1Btn_Array[3]);
    trace("i is " + i)
    //level1Btn_Array[3]
    //screenPath.L1P7Dot4.gotoAndStop(frame);
    screenPath.L1P7Dot4.gotoAndStop(frame);
    is there a way to make this work?
    if you have any ideas plz let me no, this will help imensly!
    thx, pavel

    You can use [] (array access) to get a property of an Object, e.g. object["property"] to access object.property. But you cannot do object["property.anotherProperty"] to access object.property.anotherProperty. You have to do object["property"]["anotherProperty"] instead.
    Therefore in your case you cannot access your nested timeline object using a string in such a way. What you need to do is to store the reference to the object itself in the Array:
    level1Btn_Array.push(screenPath["L1P" + (dot_BG.Dot_Screen.currentFrame - 1) + "Dot1"]);
    Then level1Btn_Array[0] is screenPath.L1PnDot1 - the object itself.

  • How I can combine pdf file with other pdf file

    How I can combine pdf file with other pdf file ?

    Or from Adobe Reader via https://createpdf.acrobat.com/

  • My links don't work when I combine another file with the pdf

    My internal bookmarked links don't work when I combine another file with the pdf.
    The external links continue to work fine, though.
    This doesn't make any sense to me at all ... but I'm hoping one of you kind folk can help?

    I opened my file and instead of merging files I used insert pages and inserted all of the pages from the file I wanted.  Then I saved the file with
    the same name.  Attached is a rough draft of some helpful hints I put together.  This has been a very painful process for us to discover how to handle
    this and there really is not much help from Adobe.
    Instead of merging files you inset pages. In Acrobat select Document - Insert pages -From file. You can select all pages or some and where you want them inserted. After you do that save the file not save as and all of your links should work. If you combine files or merge files all of the links will break.
                                                                                    GillHarley <[email protected]>                                                                              
    05/07/2009 09:54 AM                                                                                To
                                                                        "Christine Salmon" <[email protected]>                                                                              
    cc
                                Please respond to                                                                              
    [email protected]                                                                                 Subject
                                    dobe.com                            Acrobat Windows My links don't work when I combine another file with the pdf
                                                                        29k833-1Kp0-8ahk                                                                              
    I think it's something to do with naming, but I can't figure out what. This is because it asks to be saved and gives me a Binder no as the name. If I
    press Cancel at that point, I keep the file and the links. But as soon as I need to close it, it asks me again 'Do you want to save this file' and if
    I say 'Yes', I lose all the links, and if yet if I say 'No', I lose the whole file. So at some point it has to be saved but whether I keep the Binder
    no name when I save it, or use the original name, it makes no difference ... it is in the saving of it that it looks the functionality, and yet, if I
    don't save it, I lose the file.
    This makes no sense to me....I hope it does to one of you.
    For instance, Christine, how did you keep your file if you couldn't save it?
    Or have I misunderstood?

  • Possibility of combining exception broadcasting with master data bursting

    Hi Experts,
    We have a scenario where it is required to combine exception broadcasting with master data bursting.
    As per my understanding if you choose broadcast method as 'exception broadcasting', there is no option for choosing 'master data bursting'.
    Am I missing something or Is there a workaround or some method to achieve the same.
    Thanks
    Rajeev

    Hi,
        62 Scheduling: Master data inconsistent Check master data !
    Remove "In House Processing Time" from the Material Master MRP2
    view. Ensure that the Production Version & Routing are correct. Run
    MPS/MRP manually once corrected.
    Regards
    Sunil

  • How can I combine one font with many styles to show up as one font

    How can I combine one font with many styles to show up as one font? I have quite a few fonts, that instead of showing up as a single font with different font styles (bold, bolditalic, semibold, light....) each style shows up in the fonts dropdown menu as a separate font. Any way I can fix this?
    Another font question, is there any way to group my fonts in the dropdown menu according to different categories such as 'favorite san serif fonts', or 'script fonts'?

    So your saying if it wasn't set up that way be the font creator there is nothing I can do. That's a shame.
    Most of the fonts that do this were free fonts, such as Walkway.
    But I do have some fonts (hebrew fonts) that I purchased that do the same thing.

  • Has anyone been able to combine OpenGL ES with another View controller?

    Looking at all the sample code, I still can't find any example of combining OpenGL ES with another View controller. So that one could have a view that the user could input values, and another that draws OpenGL ES stuff in. Is this possible, or does one have to draw the UI stuff OpenGL? I haven't downloaded any iPhone Apps store stuff that uses any OpenGL drawing.
    Thanks for any suggestions....

    I have been able to add a second UIView to the app's window. And I set the bg color for the view to be transparent and I use the view for drawing quartz objects over the opengles scene. It's a little Heads Up UI that is not too hard to deal with. And it can blend better as an iphone app.
    You could easily add views and force them in size to be side by side, or top/bottom, whatever works.
    Have fun,
    ceder

  • Combine my Icloud with another user Icloud

    How to combine my Icloud with another persons Icloud?

    Hi Derek,
    In general, with iCal you can share your calendars, but only you can edit them. This means that you have your calendar(s) that you publish and the other user(s) subscribe to your calendar. They would publish their own calendar if they have event they want to share.
    To publish calendars locally on your machine (so all users can view them) you can set up a WebDav server on your machine (see http://www.shawnwall.com/teach/webdav-ical.php for the instructions I used - not too hard to follow), or you could try CalTalk http://pknet.com/~joe/caltalk.html which is an application that does something similar.
    Best wishes
    John M

  • How to combine looping column with calculated column

    Dear Gurus,
    I have a report that contains number of sale items in each plant. And plant (0PLANT) is a master data. I have to calculate Accumulate Total as below:
         Plant                         
    Date     Mall 6     Pinklao     Siam     Mini L/P     Total     Acc. Total
    1     135,260     186,170     103,833     145,636     570,899     570,899
    2     32,043     22,772     29,587     19,098     103,500     674,399
    3     49,477     48,919     20,206     23,587     142,189     816,588
    4     33,937     32,399     30,520     30,710     127,566     944,154
    In the column section, I have put the Quantity under Key Figure Structure and put Plant upper the it, so I get the result as below
         Plant                    
    Date     Mall 6     Pinklao     Siam     Mini L/P     Total
    1     135,260     186,170     103,833     145,636     570,899
    2     32,043     22,772     29,587     19,098     103,500
    3     49,477     48,919     20,206     23,587     142,189
    4     33,937     32,399     30,520     30,710     127,566
    I have no idea how can I put the Acc. Total to the report. Please suggest me for this issue. I'm so new for BW.
    Thanks in advance
    Edited by: Sukanya Nawnaung on Apr 24, 2008 6:04 AM

    Not knowing your tables I do not know the answer as it is not obvious from your scripts what the join between the two data sets would be??
    If you can tell me that then you can easily combine the two with an in-line view or using the new WITH... syntax.
    Otherwise, I see that the only difference between the two joins is;-
    1st WHERE DR_ACC = DECODE(DR_ACC,*'TXN'*,DR_ACC)
    2nd WHERE DR_ACC = DECODE(DR_ACC,*'OFS'*,DR_ACC)
    If you make this (don't understand the need for the decode, why is it here?!); -
    DR_ACC in ('TXN','OFS')
    And then use a case statement if you need to seperate out your two pairs of columns; -
    case when DR_ACC = 'TXN' then TXN_BRANCH else null end as "Transaction Branch" (repeat principal for other 3 columns)
    case when DR_ACC = 'OFS' then A.OFS_BRANCH else null end as "Offset Branch", (repeat principal for other 3 columns)
    Make sense?
    regards,
    Robert.

  • How to combine a bar with a line in a chart

    Post Author: rbcdexia
    CA Forum: Charts and Graphs
    We want to combine data in bars and with a line showing in one chart.
    Is that possible? How do you configure your chart?
    The line and the bars are based on the values from different fields in the same table.

    Post Author: pareshb
    CA Forum: Charts and Graphs
    We are using Crystal Reports for Visual Studio 2005. Can you please let me know how to combine a bar with a line chart.
    Thanks in advance.Paresh

  • How to combine swm file with powershell

    hi,I get strucked in "combining swm file with powershell",
    there are two swm file in my volume D ,when i use the command "Export-WindowsImage -SourceImagePath D:\t.swm  -SplitImageFilePattern D:\t*.swm -DestinationImagePath G:\install.wim -SourceIndex 1"
    it told me:"file exited,you can't create this file".
    but when i used dism /apply-image command it works well.
    i tried the command "export-windowsimage",but not succeed.

    no,do you have any solution?
    I think ,er,it may be a bug .
    if you try the expand  of "expand-windowsimage " in powershell.you will find it still not work

  • Selective combining between files with odd and even numbers of pages

    Hi all! First of all, i hope this is the right forum for my question. It has been asked before, but not fully answered. My problem is combining multiple pdfs with adding a blank page only to the ones that contain odd numbers of pages, the ones with even numbers should be left alone. I need a fast and automatic way of doing this so i can save huge amounts of time when faced with massive numbers of files. If this simply cannot be done, is there a way of sorting all the files so that, from the whole group, only the ones with odd numbers of pages go to a specified folder? Like this isnt enough i have the same problem when converting, lest say, multiple word files into 1 pdf file using pdf factory.
    Thanx in advance! also, any other way to go arround this problem is most welcome!
    Cheers!

    It would require knowledge of some JavaScript to determine if a particular page was landscape and if so, to rotate it. You could try asking in the JavaScript forum.

Maybe you are looking for